ABSTRACT
BACKGROUND: Cardiac rehabilitation (CR) is recommended for patients with cardiovascular disease. However, the participation and completion rates for hospital-based CR are low, and home-based CR has been suggested as an alternative. This study aimed to develop a home-based CR program and assess the feasibility of the program over a 6-week period in patients with left ventricular dysfunction or a history of myocardial infarction. METHODS: This feasibility study consisted of two phases. The initial phase (Study 1) focused on developing the home-based exercise protocol. Systematic approaches to developing evidence-based home-based exercise intervention were implemented including systematic review, patient surveys, and expert consensus. Study 2 aimed to evaluate the feasibility of a 6-week home-based CR program that was based on the results of Study 1. Study 2 included two exercise education sessions and four telephone counseling sessions. During this stage of the exercise program, the participants exercised on two separate days and their experiences while performing the aerobic and resistance exercises were surveyed. Eight participants participated in Study 1 and 16 participated in Study 2. RESULTS: Participants expressed overall satisfaction with the exercise program in Study 1. Heart rate increased in response to exercise, but this did not correspond with perceived exertion. The aim of the home-based CR exercise program was for participants to achieve exercise goals (≥150 min/week of aerobic type exercises as well as at least twice weekly resistance exercise using own body weights). We aimed to increase compliance and adherence to the home-based CR program. In Study 2, 13 out of 16 participants (81.3%) completed the 6-week home-based CR program, with a participation rate of 100% in both exercise education and phone counseling sessions. Adherence to the home-based exercise protocol was 83.1% and no serious adverse events were observed. At the beginning of the study, only three out of 13 participants (23.1%) met the requirements for both aerobic and resistance exercises, but at the end of the 6-week program, 10 out of 13 participants (76.9%) fulfilled the requirements. CONCLUSION: The exercise program developed in this study was safe and feasible, and the 6-week home-based CR program was feasible for patients with cardiovascular disease without any reported adverse effects.
ABSTRACT
This study evaluated the effects of supplementing solubles from shredded, steam-exploded pine particles (SSPP) on growth performances, plasma biochemicals, and microbial composition in broilers. The birds were reared for 28 days and fed basal diets with or without the inclusion of SSPP from 8 days old. There were a total of three dietary treatments supplemented with 0% (0% SSPP), 0.1% (0.1% SSPP) and 0.4% (0.4% SSPP) SSPP in basal diets. Supplementation of SSPP did not significantly affect growth or plasma biochemicals, but there was a clear indication of diet-induced microbial shifts. Beta-diversity analysis revealed SSPP supplementation-related clustering (ANOSIM: r = 0.31, p < 0.01), with an overall lower (PERMDISP: p < 0.05) individual dispersion in comparison to the control group. In addition, the proportions of the Bacteroides were increased, and the relative abundances of the families Vallitaleaceae, Defluviitaleaceae, Clostridiaceae, and the genera Butyricicoccus and Anaerofilum (p < 0.05) were significantly higher in the 0.4% SSPP group than in the control group. Furthermore, the linear discriminant analysis effect size (LEfSe) also showed that beneficial bacteria such as Ruminococcus albus and Butyricicoccus pullicaecorum were identified as microbial biomarkers of dietary SSPP inclusion (p < 0.05; | LDA effect size | > 2.0). Finally, network analysis showed that strong positive correlations were established among microbial species belonging to the class Clostridia, whereas Erysipelotrichia and Bacteroidia were mostly negatively correlated with Clostridia. Taken together, the results suggested that SSPP supplementation modulates the cecal microbial composition of broilers toward a "healthier" profile.
ABSTRACT
Deep neural networks (DNNs) have successfully classified EEG-based brain-computer interface (BCI) systems. However, recent studies have found that well-designed input samples, known as adversarial examples, can easily fool well-performed deep neural networks model with minor perturbations undetectable by a human. This paper proposes an efficient generative model named generative perturbation network (GPN), which can generate universal adversarial examples with the same architecture for non-targeted and targeted attacks. Furthermore, the proposed model can be efficiently extended to conditionally or simultaneously generate perturbations for various targets and victim models. Our experimental evaluation demonstrates that perturbations generated by the proposed model outperform previous approaches for crafting signal-agnostic perturbations. We demonstrate that the extended network for signal-specific methods also significantly reduces generation time while performing similarly. The transferability across classification networks of the proposed method is superior to the other methods, which shows our perturbations' high level of generality.
Subject(s)
Brain-Computer Interfaces , Humans , Neural Networks, ComputerABSTRACT
This study was conducted to investigate the effect of supplementing solubles from steam-exploded pine particles (SSPP) on mitigating the adverse effects of cyclic heat stress (CHS) in broilers which were distributed into 3 dietary treatment groups and 2 temperature conditions. Heat stress (HS) exposure for 6 h daily for 7 d adversely affected performance parameters and rectal temperature of chickens. The absolute and relative weights of the liver and bursa of Fabricius decreased in the CHS group while the relative lengths of the jejunum and ileum increased, which was rescued by dietary supplementation with SSPP. The expression of mucin2 (MUC2) and occludin (OCLN) genes was decreased in CHS birds. The expression of heat shock protein -70 and -90 increased in 0% HS compared to that in 0% NT. Birds supplemented with 0.4% SSPP had higher NADPH oxidase -1 expression than birds in the 0% and 0.1% SSPP treatments. Beta diversity of gut microbiota evaluated through unweighted UniFrac distances was significantly different among treatments. Bacteroidetes was among the 2 most abundant phyla in the cecum, which decreased with 0.1% NT and increased with 0.1% HS in comparison to 0% NT. A total of 13 genera were modified by HS, 5 were altered by dose, and nine showed an interaction effect. In conclusion, CHS adversely affects performance and gut health which can be mitigated with dietary SSPP supplementation that modifies the cecal microbiota in broilers.
Subject(s)
Chickens , Gastrointestinal Microbiome , Animals , Steam , Dietary Supplements , Diet/veterinary , Heat-Shock Response , Cecum , Animal Feed/analysisABSTRACT
BACKGROUND: The fixture thread depth reportedly influences the primary stability of dental implant, but its effect on the positional accuracy in immediate implant placement has not been reported previously. MATERIALS AND METHODS: Fifty-six single-rooted, anterior and premolar teeth were extracted from six human cadavers, followed by installing either regular-threaded implants (RT group, N = 30) or deep-threaded implants (DT group, N = 26) completely relying on the surgical guide. Optical impressions taken after osteotomy and fixture installation were superimposed with the preoperative virtual planning data to measure the vertical, angular, platform and apex deviations that occurred during osteotomy and installation. RESULTS: While the osteotomy deviations were similar between the two groups, the angular and apex deviation of the DT group (2.67 ± 2.56°; 1.04 ± 0.49 mm, respectively) were significantly larger than those of the RT group (1.61 ± 1.04°; 0.67 ± 0.41 mm, respectively) during installation (p < .05). When the installation deviations were analysed in the anterior and premolar areas separately, the angular, platform and apex deviations of the DT group (3.05 ± 3.26°; 0.75 ± 0.32 mm; 1.08 ± 0.56 mm, respectively) were significantly larger than those of the RT group (1.56 ± 0.73°, 0.59 ± 0.28 mm; 0.62 ± 0.38 mm, respectively) in the anterior site (p < .05), whereas there was no significant intergroup difference in the premolar site. CONCLUSION: In immediate-implant surgery, using an implant with a deeper thread might increase the deviations during installation, especially in the anterior area.
Subject(s)
Dental Implants , Surgery, Computer-Assisted , Humans , Dental Implantation, Endosseous , Cone-Beam Computed Tomography , Cadaver , Computer-Aided Design , Imaging, Three-DimensionalABSTRACT
BACKGROUND AND STUDY OBJECT: Pedicle screw fixation has been widely used in surgical treatment for infective lumbar spondylodiskitis to prevent instability and deformity. The cortical bone trajectory pedicle screw (CBTPS) fixation is a minimally invasive posterior spinal fixation system that runs from the pedicle's entry point of the caudiomedial region toward the cephalad-divergent direction. Successful results with CBTPS fixation have been reported to treat degenerative and osteoporotic spinal diseases. This study aims to investigate the clinical feasibility of CBTPS in the surgical treatment of pyogenic lumbar spondylodiskitis. PATIENT AND METHODS: We retrospectively retrieved 20 consecutive patients from two academic centers who were surgically treated for monosegmental lumbar pyogenic spondylodiskitis. The primary surgical treatment was the anterior lumbar interbody fusion with decompression, debridement, and reconstruction using an autogenous iliac strut bone graft. One to 2 weeks after the primary surgery, patients underwent a second surgery for posterior instrumentation using conventional pedicle screws (CPS; group I) and CBTPS (group II). Radiographic parameters of the deformity angle at the fusion segment and clinical parameter of visual analog scale (VAS) scores were assessed preoperatively, postoperatively, and at the last follow-up. RESULTS: There were 10 patients in each group. The mean follow-up periods of groups I and II were 51.10 ± 6.95 and 28.60 ± 9.31 months, respectively. Intergroup analysis indicated the two groups area age-matched (p = 0.38), but initial C-reactive protein (CRP; mg/dL, p = 0.04), CRP normalization (months, p = 0.00), and follow-up duration (months, p = 0.00) were heterogeneous. Meanwhile, deformity angles (segmental lordosis) between the two groups were not significantly different preoperatively (p = 0.25), postoperatively (p = 0.13), and at last follow-up (p = 0.38). The intragroup analysis indicated a significant postoperative increase of lordosis in both group I and II (p = 0.00 and 0.04, respectively) with subsequent subsidence. Lordosis remained increased at the last follow-up with or without significance (group I, p = 0.02; group II, p = 0.62). Both groups showed significant improvement in VAS scores (group I, p = 0.00; group II, p = 0.00). CONCLUSION: In monosegmental lumbar spondylodiskitis, posterior stabilization of the anterior strut bone graft by CBTPS and CPS was comparable via the radiographic parameter of segmental lordosis or deformity angle. Our observation suggests the clinical feasibility of CBTPS in the treatment of relatively mild monosegmental pyogenic lumbar spondylodiskitis.
Subject(s)
Discitis , Lordosis , Pedicle Screws , Spinal Fusion , Humans , Discitis/diagnostic imaging , Discitis/surgery , Retrospective Studies , Lumbar Vertebrae/diagnostic imaging , Lumbar Vertebrae/surgery , Spinal Fusion/methods , Cortical Bone/diagnostic imaging , Cortical Bone/surgery , Treatment OutcomeABSTRACT
An elastic printed circuit board (E-PCB) is a conductive framework used for the facile assembly of system-level stretchable electronics. E-PCBs require elastic conductors that have high conductivity, high stretchability, tough adhesion to various components, and imperceptible resistance changes even under large strain. We present a liquid metal particle network (LMPNet) assembled by applying an acoustic field to a solid-state insulating liquid metal particle composite as the elastic conductor. The LMPNet conductor satisfies all the aforementioned requirements and enables the fabrication of a multilayered high-density E-PCB, in which numerous electronic components are intimately integrated to create highly stretchable skin electronics. Furthermore, we could generate the LMPNet in various polymer matrices, including hydrogels, self-healing elastomers, and photoresists, thus showing their potential for use in soft electronics.
ABSTRACT
Improving the availability of underutilized waste for the economic use of livestock feed can be important in countries where feed grain production is scarce. Modulating the gut microbiota through the fibrous content present in these wastes may help mitigate the adverse effects of heat stress (HS). Here, we investigated the effects of dietary steam-exploded pine particle (SPP), a value-added waste product, on the performance, gut health, and cecum microbiota in heat-stressed broilers. Ross 308 broilers (n = 180) at 29 days of age were distributed into three dietary treatment groups (0%, 1%, and 2% SPP) and two temperature conditions (NT: 21 °C; CHS: 31 °C) and grown for seven days. CHS, but not SPP, adversely affected performance parameters, but SPP did not interactively modulate these results. On the contrary, both differently affected other parameters. CHS resulted in increased rectal temperature, total protein in serum, and Nox4 gene expression, whereas 2% SPP increased GLP-2 and the Nox4 gene expression in the duodenum in comparison to 0% and 1% SPP. CHS significantly modified the beta-diversity of cecal microbiota while 1% SPP supplementation in diets increased the abundance of the favorable bacterial genera in chicken. Concludingly, CHS adversely affects growth performances, gut health, stress-related genes, and cecal microbiota while dietary 1% SPP may facilitate the proliferation of beneficial microorganisms in the cecum of broilers.
Subject(s)
Gastrointestinal Microbiome , Graft vs Host Disease , Heat Stress Disorders , Pinus , Animals , Chickens/microbiology , Steam , Heat Stress Disorders/prevention & control , Heat Stress Disorders/veterinary , Heat-Shock Response , Dietary Supplements/analysisABSTRACT
Artificial muscles are indispensable components for next-generation robotics capable of mimicking sophisticated movements of living systems. However, an optimal combination of actuation parameters, including strain, stress, energy density and high mechanical strength, is required for their practical applications. Here we report mammalian-skeletal-muscle-inspired single fibres and bundles with large and strong contractive actuation. The use of exfoliated graphene fillers within a uniaxial liquid crystalline matrix enables photothermal actuation with large work capacity and rapid response. Moreover, the reversible percolation of graphene fillers induced by the thermodynamic conformational transition of mesoscale structures can be in situ monitored by electrical switching. Such a dynamic percolation behaviour effectively strengthens the mechanical properties of the actuator fibres, particularly in the contracted actuation state, enabling mammalian-muscle-like reliable reversible actuation. Taking advantage of a mechanically compliant fibre structure, smart actuators are readily integrated into strong bundles as well as high-power soft robotics with light-driven remote control.
Subject(s)
Graphite , Robotics , Animals , Humans , Graphite/chemistry , MammalsABSTRACT
Heat stress (HS) negatively influences livestock productivity, but it can be, at least in part, mitigated by nutritional interventions. One such intervention is to use byproducts from various sources that are likely to be included in the consumer chain. Thus, the present study investigated the effects of dietary supplementation of solubles from shredded, steam-exploded pine particles (SSPPs) on the performance and cecum microbiota in broilers subjected to acute HS. One-week-old Ross 308 broilers (n = 108) were fed 0%, 0.1%, or 0.4% SSPP in their diets. On the 37th day, forty birds were allocated to one of four groups; namely, a group fed a control diet without SSPPs at thermoneutral temperature (NT) (0% NT) and acute heat-stressed birds with 0% (0% HS), 0.1% (0.1% HS), and 0.4% (0.4% HS) SSPP-supplemented diets. The NT was maintained at 21.0 °C, while the HS room was increased to 31 °C. The final BW, percent difference in body weight (PDBW), and feed intake (FI) were lower in HS birds, but PDBW was reversely associated with dietary SSPP. Similarly, HS birds had a higher rectal temperature (RT) and ΔT in comparison to birds kept at NT. The FI of SSPP-supplemented birds was not significant, indicating lower HS effects. Plasma triglyceride was decreased in HS birds but not affected in 0.1% HS birds in comparison to 0% NT birds. OTUs and Chao1 were increased by 0.1% HS compared to 0% NT. Unweighted Unifrac distances for 0.1% HS were different from 0% NT and 0.4% HS. The favorable bacterial phylum (Tenericutes) and genera (Faecalibacterium and Anaerofustis) were increased, while the pathogenic genus (Enterococcus) was decreased, in SSPP-supplemented birds. In sum, production performances are negatively affected under acute HS. Dietary supplementation of SSPPs is beneficial for improving community richness indices and unweighted Unifrac distances, and it enhanced the advantageous bacterial phyla and reduced virulent genera and triglyceride hydrolysis in acute HS broilers. Our results indicate that dietary SSPPs modulates the microbial profile of the cecum while resulting in relatively less weight loss and lower rectal temperature compared to control.
ABSTRACT
Citrus peels are generally discarded as waste, although they are rich sources of health-promoting compounds. This study investigated the properties of citrus peels for development as a potential functional tea ingredient. Three citrus peel powders (DCPPs, Cheonhyehyang, Hallabong, and orange) which were dried by air- and freeze-drying, were used to prepare machine-drip tea. Then, total polyphenol compounds (TPCs), flavonoids, and the DPPH radical scavenging activity of DCPPs and teas were evaluated. Freeze-dried DCPPs had relatively higher TPC s (16.47-21.11 mg GAE/g) and DPPH radical scavenging activity (3.25-16.43 mg GAE/g) than air-dried DCPPs; TPCs (14.06-19.12 mg GAE/g) and DPPH radical scavenging activity (1.80-3.22 mg GAE/g). In contrast, air-dried DCPPs were more effective in machine-drip teas, showing a higher range of TPCs (50.64-85.12 mg GAE/100 mL) and DPPH radical scavenging activity (1.05-3.86 mg GAE/100 mL) than freeze-dried DCPPs; TPCs (40.44-46.69 mg GAE/100 mL) and DPPH radical scavenging activity (0.56-1.08 mg GAE/100 mL). Among citrus varieties, Cheonhyehyang had the highest TPCs and DPPH radical scavenging activity in both DCPP and tea. Four flavonoids (Hesperidin, Naringin, Nobiletin, and Tangeretin) mainly existed in citrus peels. The amount of hesperidin was highest; therefore, Hallabong and orange exhibited higher total flavonoid contents. However, freeze-dried Cheonhyehyang peel and air-dried Cheonhyehyang tea, which showed the highest TPCs and DPPH radical scavenging activity, had higher nobiletin and tangeretin. This implies that nobiletin and tangeretin strongly influenced the antioxidant activity of citrus peels with TPC. This research provides essential information for the tea industry looking for functional ingredients. In addition, it helps to reduce by-products by using citrus peel powders.
ABSTRACT
Over the past few years, considerable effort has been directed toward the development and improvement of mechanoluminescence (ML)-based stress sensing as an efficient nondestructive inspection technique. One of the challenges in ML stress sensing is the limited luminescent intensity and sensitivity of the ML-epoxy composite film to the local stress field. Herein, we present a novel approach for increasing the sensitivity of ML composites made of an epoxy resin matrix and SrAl2O4:Eu2+, Dy3+ particles functionalized with (3-aminopropyl)triethoxysilane. We performed a tensile test on an epoxy/ML composite specimen to investigate the effect of surface modification of ML particles on the luminescent sensitivity. A series of characterization analyses were performed on the modified surface to investigate the interfacial bonding. In addition, we applied the modified ML/epoxy paint to one side of the tensile specimen with an artificial invisible notch on the other side to visualize the stress field via light intensity (LI) distribution and then compared the results through a finite-element analysis (FEA). Surface modification of ML particles increased the sensitivity and introduced new chemical bonds, corresponding to a larger stress transfer through interfacial bonding rather than mere mechanical locking. In addition, the applied ML film on the notched specimen could visualize the specific pattern of LI reflecting the presence of a crack, which was confirmed by the FEA simulation. This implies that the proposed method of enhancing the ML film is promising for nondestructively predicting the presence, shape, and residual life of a crack in a specimen.
ABSTRACT
BACKGROUND: Given the incubation period of viral diseases, a secondary blood test should be performed at least 3-6 months after the first test to ensure the safety of allogenic bone grafts obtained from living donors in some tissue banks. The allograft is discarded if a secondary blood test was unavailable. The secondary blood test can be replaced with a nucleic acid amplification test (NAT) to reduce the discarded allograft. The purpose of this study was to analyze the comparative efficiency of secondary blood test and NAT to determine the donor suitability of allogenic bone grafts. METHODS: Allogenic bones were retrieved from 452 living donors between January 2013 and December 2019. A secondary blood test was conducted in 182 patients and NAT was performed in 270 patients. The average age of donors was 69 years (range, 33-87 years). They included 86 men and 366 women. The initial blood tests including hepatitis B, hepatitis C, AIDS, and syphilis were conducted before retrieving grafts. The results were analyzed after the secondary blood test was performed at least 3 to 6 months after the first test because of the incubation period of the viral diseases. NAT was performed within 2 months after the first blood test. RESULTS: Sixty-seven of the 452 cases (14.8%) were discarded. In the secondary blood test group, 50 out of 182 cases (27.4%), and in the NAT group, 17 out of 270 cases (6.3%) were discarded. None of the 132 donors tested positive in the secondary blood test after testing negative in the first test. CONCLUSIONS: It is extremely rare that the secondary blood test yields positive results in donors who tested negative in the initial test. However, quite a few grafts are discarded only because the secondary blood test is not available. In terms of economics and ethics, the secondary blood test may not be necessary or if required, a single test such as NAT for infectious diseases may be performed to determine donor suitability of allogenic bone.
Subject(s)
Blood Donors , DNA, Viral , Allografts , Female , Hematologic Tests , Humans , Male , Nucleic Acid Amplification TechniquesABSTRACT
Urban scene modeling is a challenging but essential task for various applications, such as 3D map generation, city digitization, and AR/VR/metaverse applications. To model man-made structures, such as roads and buildings, which are the major components in general urban scenes, we present a clustering-based plane segmentation neural network using 3D point clouds, called hybrid K-means plane segmentation (HKPS). The proposed method segments unorganized 3D point clouds into planes by training the neural network to estimate the appropriate number of planes in the point cloud based on hybrid K-means clustering. We consider both the Euclidean distance and cosine distance to cluster nearby points in the same direction for better plane segmentation results. Our network does not require any labeled information for training. We evaluated the proposed method using the Virtual KITTI dataset and showed that our method outperforms conventional methods in plane segmentation. Our code is publicly available.
Subject(s)
Neural Networks, Computer , Cluster Analysis , HumansABSTRACT
BACKGROUND: Acetabular prosthesis positioning in total hip arthroplasty (THA) is crucial in reducing the risk of dislocation. There has been minimal research on the proper way to put the acetabular components into the safe zone intraoperatively. Assessment of version by intraoperative imaging intensifier is very valuable. The value of Widmer's method, using the intraoperative C-arm available to determine cup anteversion was assessed. METHODS: One hundred one hips in 91 patients who underwent primary THA were eligible for inclusion. Utilizing intraoperative C-arm images, measurement was performed using the technique described by Widmer. The values obtained using 3D computed tomography postoperatively, which determined the anteversion of the acetabular component, were regarded as the reference standard. RESULTS: The method of Widmer obtained values similar to those obtained using 3D computed tomography and was considered accurate (n.s.). All 101 hips were positioned in the set target zone. Among the 101 hips, the cup position in nine hips (8.9%) was changed. The dislocation rate in our study was 1.0% with all dislocations occurring in hips placed in the target zone. The mean Harris hip score after THA in 1 year was 94.2 (82-98). CONCLUSIONS: The method of Widmer was accurate using intraoperative imaging intensifier for the measurement of the anteversion of the acetabular component during THA, with reference to the anteversion obtained from the 3D computed tomography. Also, utilizing intraoperative C-arm imaging was very useful because it allowed for correction of the position of the acetabular cup.
Subject(s)
Arthroplasty, Replacement, Hip , Hip Prosthesis , Joint Dislocations , Acetabulum/diagnostic imaging , Acetabulum/surgery , Arthroplasty, Replacement, Hip/adverse effects , Humans , Radiographic Image EnhancementABSTRACT
The purpose of this study is to compare the cut-out rate and sliding distance associated with limb length inequality between operations using a standard non-sliding lag screw versus those using a non-sliding lag screw with U-blade (RC) in the Gamma3 nail. This is a retrospective review of two case series involving different lag screws for the Gamma3 nail. Propensity score matching analysis was used to adjust the confounding factors. A comparative analysis of 304 patients who treated with Gamma3 nail with either a standard non-sliding lag screw or a U-Blade (RC) lag screw was performed. Between 2014 and 2018, 152 patients were treated with U-blade (RC) lag screws, and these patients were matched with those treated with standard lag screws. There was no significant difference in cut-out rate between groups. However, additional use of anti-rotation U-blade (RC) could significantly decrease lag screw sliding, with the group treated with U-Blade (RC) lag screws exhibiting shorter sliding, especially in AO/OTA31 A2 and A3 fractures. Also, in A2 and A3 fractures, the mean lag screw sliding distance was greater than that seen in A1 fractures in both groups. These findings can help trauma surgeons choose the proper implant to reduce leg length inequality.
Subject(s)
Bone Nails/statistics & numerical data , Bone Screws/statistics & numerical data , Fracture Fixation, Intramedullary/instrumentation , Hip Fractures/surgery , Prosthesis Design/instrumentation , Recovery of Function , Aged, 80 and over , Female , Follow-Up Studies , Hip Fractures/pathology , Humans , Male , Prognosis , Retrospective Studies , Rotation , Treatment OutcomeABSTRACT
The gut microbiome stimulates nutrient metabolism and could effectively generate heat tolerance in chickens. This study investigates the effects of dietary steam-exploded pine particle (SPP) supplementation and subsequent acute heat stress on productive performance and cecum microbiome in broilers. Eight-day Ross 308 broilers were distributed in three groups with 0%, 1%, and 2% SPP in diets. On the 41st day, forty birds were allocated to four groups with ten birds each. The treatments were control diet at thermoneutral temperature (0% NT) and acute heat-stressed (HS) birds fed control (0% HS), 1% (1% HS), and 2% (2% HS) SPP. Parameters recorded were body weight (BW), feed intake (FI), rectal temperature (RT), relative organ weight, and metagenome analysis from cecum samples. Percent difference in BW, FI, and RT was decreased in HS birds. Metagenome analysis revealed similar richness and diversity in microbial communities. The relative abundance of the bacterial genus such as Limosilactobacillus, Drancourtella, and Ihubacter was increased while that of Alistipes, Alkalibacter, Lachnotalea, and Turicibacter was decreased in SPP supplemented HS birds. Concludingly, the production performance of broilers is negatively influenced during HS, and 2% dietary SPP supplementation may reduce the adverse effects of HS by modifying the microbiota in chickens.
ABSTRACT
Allium section Rhizirideum is reviewed for South Korea and neighboring northeastern China based on critical observation of wild populations and herbarium materials. Species delimitations are re-evaluated on the basis of morphological and somatic chromosome numbers, resulting in the recognition of five species. Allium dumebuchum from Ulleungdo Island, South Korea, is described as a new species. This species is most similar to A. senescens due to its habits, but is clearly distinguished particularly by its rhomboid scapes in cross-secion, light purple perianth color, entire and narrowly triangular inner filaments, and flowering season from late September. One previously recognized species is placed into synonymy: A. pseudosenescens (under A. senescens). Photographs and a key to species of Allium section Rhizirideum in South Korea and northeastern China are provided in addition to information on nomenclatural types, synonymies, chromosome numbers, distribution, and specimens examined.
ABSTRACT
A novel motion correction algorithm for X-ray lung CT imaging has been developed recently. It was designed to perform for routine chest or thorax CT scans without gating, namely axial or helical scans with pitch around 1.0. The algorithm makes use of two conjugate partial angle reconstruction images for motion estimation via non-rigid registration which is followed by a motion compensated reconstruction. Differently from other conventional approaches, no segmentation is adopted in motion estimation. This makes motion estimation of various fine lung structures possible. The aim of this study is to explore the performance of the proposed method in correcting the lung motion artifacts which arise even under routine CT scans with breath-hold. The artifacts are known to mimic various lung diseases, so it is of great interest to address the problem. For that purpose, a moving phantom experiment and clinical study (seven cases) were conducted. We selected the entropy and positivity as figure of merits to compare the reconstructed images before and after the motion correction. Results of both phantom and clinical studies showed a statistically significant improvement by the proposed method, namely up to 53.6% (p < 0.05) and up to 35.5% (p < 0.05) improvement by means of the positivity measure, respectively. Images of the proposed method show significantly reduced motion artifacts of various lung structures such as lung parenchyma, pulmonary vessels, and airways which are prominent in FBP images. Results of two exemplary cases also showed great potential of the proposed method in correcting motion artifacts of the aorta which is known to mimic aortic dissection. Compared to other approaches, the proposed method provides an excellent performance and a fully automatic workflow. In addition, it has a great potential to handle motions in wide range of organs such as lung structures and the aorta. We expect that this would pave a way toward innovations in chest and thorax CT imaging.
Subject(s)
Lung/diagnostic imaging , Radiography, Thoracic , Tomography, X-Ray Computed , Algorithms , Artifacts , Humans , MotionABSTRACT
Effective capture and rapid detection of pathogenic bacteria causing pandemic/epidemic diseases is an important task for global surveillance and prevention of human health threats. Here, we present an advanced approach for the on-site capture and detection of pathogenic bacteria through the combination of hierarchical nanostructures and a nuclease-responsive DNA probe. The specially designed hierarchical nanocilia and network structures on the pillar arrays, termed 3D bacterial capturing nanotopographical trap, exhibit excellent mechanical reliability and rapid (<30 s) and irreversible bacterial capturability. Moreover, the nuclease-responsive DNA probe enables the highly sensitive and extremely fast (<1 min) detection of bacteria. The bacterial capturing nanotopographical trap (b-CNT) facilitates the on-site capture and detection of notorious infectious pathogens (Escherichia coli O157:H7, Salmonella enteritidis, Staphylococcus aureus, and Bacillus cereus) from kitchen tools and food samples. Accordingly, the usefulness of the b-CNT is confirmed as a simple, fast, sensitive, portable, and robust on-site capture and detection tool for point-of-care testing.