ABSTRACT
While the orientation-dependent properties of semiconductor nanowires have been theoretically predicted, their study has long been overlooked in many fields owing to the limits to controlling the crystallographic growth direction of nanowires (NWs). We present here the orientation-controlled growth of single-crystalline germanium (Ge) NWs using a self-catalytic low-pressure chemical vapor deposition process. By adjusting the growth temperature, the orientation of growth direction in GeNWs was selectively controlled to the ⟨110⟩, ⟨112⟩, or ⟨111⟩ directions on the same substrate. The NWs with different growth directions exhibit distinct morphological features, allowing control of the NW morphology from uniform NWs to nanoribbon structures. Significantly, the VLS-based self-catalytic growth of the ⟨111⟩ oriented GeNW suggests that NW growth is possible for single elementary materials even without an appropriate external catalyst. Furthermore, these findings could provide opportunities to investigate the orientation-dependent properties of semiconductor NWs.
ABSTRACT
Molybdenum disulfide (MoS2) presents fascinating properties for next-generation applications in diverse fields. However, fully exploiting the best properties of MoS2 in largescale practical applications still remains a challenge due to lack of proper processing methods. Solution-based processing can be a promising route for scalable production of MoS2 nanosheets, but the resulting assembled film possesses an enormous number of interfaces that significantly compromise the intrinsic electrical properties. Herein, we demonstrate the solution processing of MoS2 and subsequent precursor-assisted chemical welding to form defective MoS2-x at the nanosheet interfaces. The formation of defective MoS2-x significantly reduces the electrical contact resistances, and thus the chemically welded MoS2 film exhibits more than 2 orders of magnitude improved electrical conductivity. Furthermore, the chemical welding provides MoS2-x interface induced additional defect originated functionalities for diverse applications such as broadband photodetection over the near-infrared range and improved electrocatalytic activity for hydrogen evolution reactions. Overall, this precursor-assisted chemical welding strategy can be a facile route to produce high-quality MoS2 films with low-quality defective MoS2-x at the interfaces having multifunctionalities in electronics, optoelectronics, and electrocatalysis.
ABSTRACT
The conventional pH sensor based on the graphene ion-sensitive field-effect transistor (Gr-ISFET), which operates with an electrostatic gating at the solution-graphene interface, cannot have a pH sensitivity above the Nernst limit (â¼59 mV/pH). However, for accurate detection of the pH levels of an aqueous solution, an ultrasensitive pH sensor that can exceed the theoretical limit is required. In this study, a novel Gr-ISFET-based pH sensor is fabricated using proton-permeable defect-engineered graphene. The nanocrystalline graphene (nc-Gr) with numerous grain boundaries allows protons to penetrate the graphene layer and interact with the underlying pH-dependent charge-transfer dopant layer. We analyze the pH sensitivity of nc-Gr ISFETs by adjusting the grain boundary density of graphene and the functional group (OH-, NH2-, CH3-) on the SiO2 surface, confirming an unusual negative shift of the charge-neutral point (CNP) as the pH of the solution increases and a super-Nernstian pH response (approximately -140 mV/pH) under optimized conditions.
ABSTRACT
In MoS2-carbon composite catalysts for hydrogen evolution reaction (HER), the carbon materials generally act as supports to enhance the catalytic activity of MoS2 nanosheets. The carbon support provides a large surface area for increasing the MoS2 edge site density, and its physical structure can affect the electron transport rate in the composite catalysts. However, despite the importance of the carbon materials, direct observation of the effects of the physical properties of the carbon supports on the HER activity of MoS2-carbon composite catalysts has been hardly reported. In this work, we conduct an experimental model study to find the fundamental and important understanding of the correlation between the structural characteristics of carbon supports and the HER performance of MoS2-carbon composite catalysts using surface-modified graphitic carbon shell (GCS)-encapsulated SiO2 nanowires (GCS@SiO2 NWs) as support materials for MoS2 nanosheets. The surface defect density and the electrical resistance of GCS@SiO2 NWs are systematically modulated by control of H2 gas flow rates during the carbon shell growth on the SiO2 NWs. From in-depth characterization of the model catalysts, it is confirmed that the intrinsic catalytic activity of MoS2-carbon composites for the HER is improved linearly with the conductance of the carbon supports regardless of the MoS2 edge site density. However, in the HER polarization curve, the apparent current density increases in proportion to the product of the number of MoS2 edge sites and the conductance of GCS@SiO2 NWs.
ABSTRACT
We demonstrate silicon germanium (SiGe) alloy nanowires (NWs) with Ge nanoparticles (GeNPs) embedded in a SiO2 shell as a material for decreasing thermal conductivity. During thermal oxidation of SiGe NWs to form SiGe-SiO2 core-shell structures, Ge atoms were diffused into the SiO2 shell to relax the strain in the SiGe core, and agglomerated as a few nanometer-sized particles. This structure leads to a large reduction in thermal conductivity due to the GeNP-phonon interaction, while electrical conductivity is sustained because the core of the SiGe alloy NW provides a current path for the charged carriers. The thermal conductivity of the SiGe alloy NWs wrapped with a GeNP-embedded SiO2 shell is 0.41 W m(-1) K(-1) at 300 K.