Removal of Methylene Blue from Aqueous Solution by Mixture of Reused Silica Gel Desiccant and Natural Sand or Eggshell Waste.

The purpose of this work was to develop, characterize and test new low-cost materials suitable for removing methylene blue dye from water and wastewater by adsorption. The solid materials consisted of silica gel powder (SG), silica gel mixed with eggshell powder (SG-ES) and a mixture of silica gel with sand from the western Iraqi desert (SG-SI). The samples were milled by using an electrical mixer and a ball mill, followed by a drying step. In addition, desert sand was acid-treated in order to remove impurities. The structure and chemical composition of the samples were investigated by X-ray diffraction (XRD), a scanning electron microscopy technique equipped with an energy-dispersive X-ray spectrometer (SEM-EDX), a low-temperature nitrogen adsorption (BET) technique, thermo-analytical (TG/TGA) measurements and Fourier-transformed infrared spectroscopy (FTIR). The previously mentioned materials were tested to remove methylene blue from an aqueous solution. The adsorption experiments were monitored by ultraviolet-visible (UV-Vis) spectrophotometry and showed that SG and SG-ES gave promising results for the methylene blue removal from water. After 40 min of treatment of the aqueous solution containing 10 mg/L of MB at room temperature, the tested SG, SG-ES and SG-SI materials were found to have 86%, 80% and 57% dye adsorption efficiency, respectively. Taking into consideration not only the adsorption activity of the studied material but their availability, cost and concepts of cleaner production and waste minimization, the developed silica gel with eggshell can be considered as a good, cost-effective alternative to commercially available activated-carbon-based adsorbents. Different kinetic and isotherm models were fitted to the experimental results. A pseudo-second-kinetics-order model revealed high correlation fitting, while the Freundlich model was found to appropriately describe the adsorption isotherm. The thermal stability during the possible regeneration process of the SG-ES adsorbent mixture and its interaction mechanism with cationic dye was discussed.

Recent advances and applicable flexibility potential of electrochemical processes for wastewater treatment.

This study examined >140 relevant publications from the last few years (2018-2021). In this study, classification was reviewed depending on the operation's progress. Electrocoagulation (EC), electrooxidation (EO), electroflotation (EF), electrodialysis (ED), and electro-Fenton (EFN) processes have received considerable attention. The type of action (individual or hybrid) for each electrochemical procedure was evaluated, and statistical analysis was performed to compare them as a new manner of reviewing cited papers providing a massive amount of information efficiently to the readers. Individual or hybrid operation progress of the electrochemical techniques is critical issues. Their design, operation, and maintenance costs vary depending on the in-situ conditions, as evidenced by surveyed articles and statistical analyses. This work also examines the variables affecting the elimination efficacy, such as the applied current, reaction time, pH, type of electrolyte, initial pollutant concentration, and energy consumption. In addition, owing to its efficacy in removing toxins, the hybrid activity showed a good percentage among the studies reviewed. The promise of each wastewater treatment technology depends on the type of contamination. In some cases, EO requires additives to oxidise the pollutants. EF and EFN eliminated lightweight organic pollutants. ED has been used to treat saline water. Compared to other methods, EC has been extensively employed to remove a wide variety of contaminants.

A foam column system harvesting freshwater algae for biodiesel production: An experiment and process model evaluations.

The purpose of this study was to examine the application of the mathematical model of drift flux to the experimental results of the effect of cationic trimethyl-ammonium bromide (CTAB)-aided continuous foam flotation harvesting on the lipid content in Chlorella vulgaris microalgae. An experiment was conducted to determine the effect of the operating conditions on the enrichment factor (EF) and percentage recovery efficiency (%RE), where the flow rates at the inlet and bottom outlet remained constant. Data for the binary system (without algae) and ternary system (with algae) in an equal-area foam column show that the EF decreases linearly with increasing initial CTAB concentrations ranging from 30 to 75 mg/L for three levels of the studied air volumetric flow rate range (1-3) L/min. The percentage harvesting efficiency increased with increasing initial CTAB concentration and air volumetric flow rate to 96 % in the binary systems and 94 % in the ternary systems. However, in the foam column with the riser used in the three systems, a lower volume of liquid foam in the upward outlet stream resulted in a lower RE% than that of the column without the riser. The objective function of EF for the system with algae increased when the initial CTAB concentration was increased from 30 to 45 mg/L in the foam column with a riser for all air flow rates, and after 45 mg/L, a sudden drop in the microalgae EF was observed. In the comparison between the foam column with and without the riser for the system with algae, the optimum EF was 145 for the design of the column with the riser and 139 for the column without the riser.

Characterization of Various Titanium-Dioxide-Based Catalysts Regarding Photocatalytic Mineralization of Carbamazepine also Combined with Ozonation.

Titanium-dioxide-based semiconductors proved to be appropriate for photocatalytic application to efficiently degrade emerging organic pollutants such as various herbicides, pesticides, and pharmaceuticals in waters of environmental importance. The characterization of various TiO2 catalysts, both bare and modified (Ag- and/or N-doped), by mechanochemical treatment was carried out in this work, regarding their structure, morphology, and photocatalytic activity. For the latter investigations, carbamazepine, an antidepressant, proved to be applicable and versatile. The photocatalytic behavior of the catalysts was studied under both UV and visible light. Besides the decomposition efficiency, monitoring the intermediates provided information on the degradation mechanisms. Mechanochemical treatment significantly increased the particle size (from 30 nm to 10 µm), causing a considerable (0.14 eV) decrease in the band gap. Depending on the irradiation wavelength and the catalyst, the activity orders differed, indicating that, in the mineralization processes of carbamazepine, the importance of the different oxidizing radicals considerably deviated, e.g., Ag-TiO2 < DP25-TiO2 < ground-DP25-TiO2 < N-TiO2 ≈ N-Ag-TiO2 for O2•− and N-TiO2 ≈ Ag-TiO2 < N-Ag-TiO2 < ground-DP25-TiO2 ≈ DP25-TiO2 for HO• generation under UV irradiation. Toxicity studies have shown that the resulting intermediates are more toxic than the starting drug molecule, so full mineralization is required. This could be realized by a synergistic combination of heterogeneous photocatalysis and ozonation.

Can electrocoagulation technology be integrated with wastewater treatment systems to improve treatment efficiency?

Considerable amounts of domestic and industrial wastewater that should be treated before reuse are discharged into the environment annually. Electrocoagulation is an electrochemical technology in which electrical current is conducted through electrodes, it is mainly used to remove several types of wastewater pollutants, such as dyes, toxic materials, oil content, chemical oxygen demand, and salinity, individually or in combination with other processes. Electrocoagulation technology used in hybrid systems along with other technologies for wastewater treatment are reviewed in this work, and the articles reviewed herein were published from 2018 to 2021. Electrocoagulation is widely employed in integrated systems with other electrochemical technologies or conventional methods for effective removal of different pollutants with less cost and sometimes over shorter durations of operation. It has also been observed that the hybrid effects besides increasing the removal efficiency can overcome the disadvantages of using electrocoagulation alone, such as less sludge formation, high cost of operation and increased life of the used electrodes, and stable flux of water with longer periods of operation. More than 20 types of other technologies have been combined efficiently with electrocoagulation.

A selective hydrometallurgical method for scandium recovery from a real red mud leachate: A comparative study.

The aim of this study was to recover Sc as the main product and Fe as a by-product from Hungarian bauxite residue/red mud (RM) waste material by solvent extraction (SX). Moreover, a new technique was developed for the selective separation of Sc and Fe from real RM leachates. The presence of high Fe content (∼38%) in RM makes it difficult to recover Sc because of the similarity of their physicochemical properties. Pyrometallurgical and hydrometallurgical methods were applied to remove the Fe prior to SX. Two protocols based on organophosphorus compounds (OPCs) were proposed, and the main extractants were evaluated: bis(2-ethylhexyl) phosphoric acid (D2EHPA/P204) and tributyl phosphate (TBP). The results showed that SX using diethyl ether and tri-n-octylamine (N235) was efficient in extracting Fe(III) from the HCl leachate as HFeC14. Over 97% of Sc was extracted by D2EHPA extractant under the following conditions; 0.05 mol/L of D2EHPA concentration, A/O phase ratio of 3:1, pH 0-1, 10 min of shaking time, and a temperature of 25 °C. Sc(OH)3 as a precipitate was efficiently obtained by stripping from the D2EHPA organic phase by 2.5 mol/L of NaOH with a stripping efficiency of 95%. In the TBP system, 99% of Sc was extracted under the following conditions: 12.5% vol of TBP, an A/O phase ratio of 3:1, 10 min of shaking time, and a temperature of 25 °C. The Sc contained in the TBP organic phase could be efficiently stripped by 1 mol/L of HCl with a stripping efficiency of 92.85%.

Poly-NIPAM/Fe3O4/multiwalled carbon nanotube nanocomposites for kerosene removal from water.

Multiwalled carbon nanotubes (MWCNTs) were oxidized using a mixture of H2SO4 and HNO3, and the oxidized MWCNTS were decorated with magnetite (Fe3O4). Finally, poly-N-isopropyl acrylamide-co-butyl acrylate (P-NIPAM) was added to obtain P-NIPAM/Fe/MWCNT nanocomposites. The nanosorbents were characterized by various techniques, including X-ray diffraction, transmission electron microscopy, scanning electron microscopy, thermogravimetric analysis, and Brunauer-Emmett-Teller analysis. The P-NIPAM/Fe/MWCNT nanocomposites exhibited increased surface hydrophobicity. Owing to their higher adsorption capacity, their kerosene removal efficiency was 95%; by contrast, the as-prepared, oxidized, and magnetite-decorated MWCNTs had removal efficiencies of 45%, 55%, and 68%, respectively. The P-NIPAM/Fe/MWCNT nanocomposites exhibited a sorbent capacity of 8.1 g/g for kerosene removal from water. The highest kerosene removal efficiency from water was obtained at a process time of 45 min, sorbent dose of 0.005 g, solution temperature of 40 °C, and pH 3.5. The P-NIPAM/Fe/MWCNTs showed excellent stability after four cycles of kerosene removal from water followed by regeneration. The reason may be the increase in the positive charge of the polymer at pH 3.5 and the increased adsorption affinity of the adsorbent toward the kerosene contaminant. The pseudo second-order model was found to be the most suitable model for studying the kinetics of the adsorption reaction.

Scandium Recovery Methods from Mining, Metallurgical Extractive Industries, and Industrial Wastes.

The recovery of scandium (Sc) from wastes and various resources using solvent extraction (SX) was discussed in detail. Moreover, the metallurgical extractive procedures for Sc recovery were presented. Acidic and neutral organophosphorus (OPCs) extractants are the most extensively used in industrial activities, considering that they provide the highest extraction efficiency of any of the valuable components. Due to the chemical and physical similarities of the rare earth metals, the separation and purification processes of Sc are difficult tasks. Sc has also been extracted from acidic solutions using carboxylic acids, amines, and acidic ß-diketone, among other solvents and chemicals. For improving the extraction efficiencies, the development of mixed extractants or synergistic systems for the SX of Sc has been carried out in recent years. Different operational parameters play an important role in the extraction process, such as the type of the aqueous phase and its acidity, the aqueous (A) to organic (O) and solid (S) to liquid (L) phase ratios, as well as the type of the diluents. Sc recovery is now implemented in industrial production using a combination of hydrometallurgical and pyrometallurgical techniques, such as ore pre-treatment, leaching, SX, precipitation, and calcination. The hydrometallurgical methods (acid leaching and SX) were effective for Sc recovery. Furthermore, the OPCs bis(2-ethylhexyl) phosphoric acid (D2EHPA/P204) and tributyl phosphate (TBP) showed interesting potential taking into consideration some co-extracted metals such as Fe(III) and Ti(IV).

V2O5, CeO2 and Their MWCNTs Nanocomposites Modified for the Removal of Kerosene from Water.

In this paper, the application of multiwalled carbon nanotubes (MWCNTs) based on metal oxide nanocomposites as adsorbents for the removal of hydrocarbons such as kerosene from water was investigated. Functionalized MWCNTs were obtained by chemical oxidation using concentrated sulfuric and nitric acids. V2O5, CeO2, and V2O5:CeO2 nanocomposites were prepared using the hydrothermal method followed by deposition of these oxides over MWCNTs. Individual and mixed metal oxides, fresh MWCNTs, and metal oxide nanoparticle-doped MWCNTs using different analysis techniques were characterized. XRD, TEM, SEM, EDX, AFM, Raman, TG/DTA, and BET techniques were used to determine the structure as well as chemical and morphological properties of the newly prepared adsorbents. Fresh MWCNTs, Ce/MWCNTs, V/MWCNTs, and V:Ce/MWCNTs were applied for the removal of kerosene from a model solution of water. GC analysis indicated that high kerosene removal efficiency (85%) and adsorption capacity (4270 mg/g) after 60 min of treatment were obtained over V:Ce/MWCNTs in comparison with fresh MWCNTs, Ce/MWCNTs and V/MWCNTs. The kinetic data were analyzed using the pseudo-first order, pseudo-second order, and intra-particle diffusion rate equations.

Polyethylene over magnetite-multiwalled carbon nanotubes for kerosene removal from water.

In this study, a nano-adsorbent was prepared for kerosene removal from water. Multiwalled carbon nanotubes (MWCNTs) were functionalized with concentrated HNO3 (nitric acid). Subsequently, Fe3O4 (magnetite) nanoparticles were deposited on the MWCNTs to prepare a magnetite/MWCNTs (Fe-MWCNTs) nanocomposite. Then, polyethylene was added to the Fe-MWCNTs to fabricate a polyethylene/magnetite/MWCNTs (PE/Fe-MWCNTs) novel nanocomposite. The nano-adsorbent was characterized using BET, FTIR, Raman, XRD, TEM, and SEM. A kerosene-water model mixture was used for adsorption tests. Several parameters: adsorption time, adsorbent dose, solution pH, solution temperature, and kerosene concentration in the kerosene-water model mixture, were analyzed during adsorption experiments. After each batch experiment, kerosene concentration was determined using high-performance liquid chromatography (HPLC). Magnetic field was used to remove the adsorbent after each experiment. The kerosene adsorption capacity and removal efficiency of the PE/Fe-MWCNTs nanocomposite (3560 mg/g and 71.2 %, respectively) were higher than those of Fe-MWCNTs, ox-MWCNTs, and fresh MWCNTs (3154 mg/g and 63.1 %, 2204 mg/g and 44.0 %, and 2092 mg/g and 41.8 %, respectively). Kerosene adsorption followed a pseudo-second-order kinetic model (R2 = 0.999) and the Langmuir isotherm model, suggesting that adsorption was uniform and homogenous process.

Polystyrene-Fe3O4-MWCNTs Nanocomposites for Toluene Removal from Water.

In this research, multi-walled carbon nanotubes (MWCNTs) were functionalized by oxidation with strong acids HNO3, H2SO4, and H2O2. Then, magnetite/MWCNTs nanocomposites were prepared and polystyrene was added to prepare polystyrene/MWCNTs/magnetite (PS:MWCNTs:Fe) nanocomposites. The magnetic property of the prepared nano-adsorbent PS:MWCNTs:Fe was successfully checked. For characterization, X-ray diffraction (XRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM), Fourier transform infrared spectroscopy (FTIR), Raman spectroscopy, and BET surface area were used to determine the structure, morphology, chemical nature, functional groups, and surface area with pore volume of the prepared nano-adsorbents. The adsorption procedures were carried out for fresh MWCNTs, oxidized MWCNTs, MWCNTs-Fe, and PS:MWCNTs:Fe nanocomposites in batch experiments. Toluene standard was used to develop the calibration curve. The results of toluene adsorption experiments exhibited that the PS:MWCNTs:Fe nonabsorbent achieved the highest removal efficiency and adsorption capacity of toluene removal. The optimum parameters for toluene removal from water were found to be 60 min, 2 mg nano-sorbent dose, pH of 5, solution temperature of 35 °C at 50 mL volume, toluene concentration of 50 mg/L, and shaking speed of 240 rpm. The adsorption kinetic study of toluene followed the pseudo-second-order kinetics, with the best correlation (R2) value of 0.998, while the equilibrium adsorption study showed that the Langmuir isotherm was obeyed, which suggested that the adsorption is a monolayer and homogenous.

Does Lake Balaton affected by pollution? Assessment through surface water quality monitoring by using different assessment methods.

In order to maintain a good environmental status of surface waters, an assessment of water quality carried out at specific intervals to monitor the changes of water quality in function of time. Human knowledge and experience are currently focused on using assessment methods, especially the integration of multiple constraining factors and considering them in conjugation with the correct decision-making process concerning the environment. When surface water is highly exposed to human activities, either from recreational or economic activity, the degree of vulnerability is high, and the quality of surface water is highly compromised. In case of Lake Balaton, there are many activities that can disrupt water dynamics. The first goal of this study is to determine the location of the least and most polluted sites around Lake Balaton. The processing of data was carried out by using multi-criteria decision techniques and environmental impact assessment method based on physical-chemical parameters in comparison with the limiting parameters. Based on the results of those methods water quality needs to be improved in western parts of the lake by using several geoengineering treatment techniques. This work covers a novel approach to comparing methods based on sum of ranking differences, whereas many method comparison studies suffer from ambiguity or from comparisons not being quite fair. This problem can be avoided if there are differences between ideal and actual rankings.

Synthesis and surface modification of magnetic Fe3O4@SiO2 core-shell nanoparticles and its application in uptake of scandium (III) ions from aqueous media.

The main objective of this work is to produce an eco-friendly and economically nano-adsorbent which can separate scandium metal ions Sc from a model aqueous phase prior to applying these adsorbents in industrial filed. The magnetic core-shell structure Fe3O4@SiO2 nanoparticles were synthesized by modified Stöber method and functionalized with (3-aminopropyl) triethoxysilane APTES as a coupling agent and ethylenediaminetetraacetic acid (EDTA) as a ligand. Magnetic nano support adsorbents exhibit many attractive opportunities due to their easy removal and possibility of reusing. The ligand grafting was chemically robust and does not appreciably influence the morphology or the structure of the substrate. To evaluate the potential, the prepared hybrid nanoparticles were used as nano-adsorbent for Sc ions from model aqueous solutions due to the fact that rare earth elements (REEs) have a strong affinity for oxygen and nitrogen donors. The iron oxide nanoparticles were prepared by co-precipitation method at pH 10 and pH 11 to get the best morphology and nanoscale dimensions of iron oxide magnetic nanoparticles. The particle size, morphology, specific surface area, and surface modification were characterized by transmission electron microscopy (TEM), Fourier transform infrared spectroscopy (FT-IR), vibrating sample magnetometer (VSM), and X-ray powder diffraction (XRD). The results showed that the Fe3O4 nanoparticles with average particle size of 15 ± 3 nm were successfully synthesized at pH 11, and 25 °C. Moreover, the prepared Fe3O4 nanoparticles were coated with amorphous SiO2 and functionalized with amino and carboxyl groups. The adsorption study conditions of Sc are as follows: the initial concentrations of the Sc model solution varied 10-50 mg/L, 20 mL volume, 20-80 mg of the Fe3O4@SiO2-COO adsorbent, pH range of 1-5, and 5 h contact time at 25 °C temperature. The adsorption equilibrium was represented with Langmuir, Freundlich, and Temkin isotherm models. Langmuir model was found to have the correlation coefficient value in good agreement with experimental results. However, the adsorption process followed pseudo-second-order kinetics.

Novel Hybrid Nanoparticles: Synthesis, Functionalization, Characterization, and Their Application in the Uptake of Scandium (III)Ions from Aqueous Media.

The aim of this study was to prepare novel supramolecular hybrid nanoparticles (HNPs) that can selectively separate and recover scandium metal ions, Sc(III), from an aqueous phase based on molecular recognition technology (MRT). Moreover, this approach is fully compatible with green chemistry principles. In this work, natural amorphous silica (SiO2) nanoparticles were prepared by a precipitation method from Iraqi rice husk (RH) followed by surface modification with 3-amino-propyl triethoxysilane (APTES) as coupling agent and Kryptofix 2.2.2 (K2.2.2) as polycyclic ligand. To evaluate the potential of the hybrid nanoparticles, the prepared HNPs were used for the solid-liquid extraction of scandium, Sc(III), ions from model solutions due to the fact that K2.2.2 are polycyclic molecules. These polycyclic molecules are able to encapsulate cations according to the corresponding cavity size with the ionic radius of metal by providing a higher protection due their cage-like structures. Moreover, the authors set the objectives to design a high-technology process using these HNPs and to develop a Sc recovery method from the aqueous model solution prior to employing it in industrial applications, e.g., for Sc recovery from red mud leachate. The concentrations of Sc model solutions were investigated using the UV-Vis spectrophotometer technique. Different characterization techniques were used including scanning electron microscope (SEM), atomic force microscopy (AFM), Brunauer-Emmett-Teller (BET), X-ray diffraction (XRD), X-ray fluorescence (XRF), and Fourier transform infrared (FTIR). The extraction efficiency of Sc varied from 81.3% to 96.7%. Moreover, the complexed Sc ions were efficiently recovered by HCl with 0.1 mol/L concentration. The stripping ratios of Sc obtained ranged from 93.1% to 97.8%.

The Photocatalytic and Antibacterial Performance of Nitrogen-Doped TiO2: Surface-Structure Dependence and Silver-Deposition Effect.

Catalysts for visible-light-driven oxidative cleaning processes and antibacterial applications (also in the dark) were developed. In order to extend the photoactivity of titanium dioxide into the visible region, nitrogen-doped TiO2 catalysts with hollow and non-hollow structures were synthesized by co-precipitation (NT-A) and sol-gel (NT-U) methods, respectively. To increase their photocatalytic and antibacterial efficiencies, various amounts of silver were successfully loaded on the surfaces of these catalysts by using a facile photo-deposition technique. Their physical and chemical properties were evaluated by using scanning electron microscopy (SEM), transmission electron microscopy-energy dispersive X-ray spectroscopy (TEM-EDS), Brunauer-Emmett-Teller (BET) surface area, X-ray diffraction (XRD), and diffuse reflectance spectra (DRS). The photocatalytic performances of the synthesized catalysts were examined in coumarin and 1,4-hydroquinone solutions. The results showed that the hollow structure of NT-A played an important role in obtaining high specific surface area and appreciable photoactivity. In addition, Ag-loading on the surface of non-hollow structured NT-U could double the photocatalytic performance with an optimum Ag concentration of 10-6 mol g-1, while a slight but monotonous decrease was caused in this respect for the hollow surface of NTA upon increasing Ag concentration. Comparing the catalysts with different structures regarding the photocatalytic performance, silverized non-hollow NT-U proved competitive with the hollow NT-A catalyst without Ag-loading for efficient visible-light-driven photocatalytic oxidative degradations. The former one, due to the silver nanoparticles on the catalyst surface, displayed an appreciable antibacterial activity, which was comparable to that of a reference material practically applied for disinfection in polymer coatings.

Environmental assessment of physical-chemical features of Lake Nasser, Egypt.

Lake Nasser is one of the largest man-made lakes on earth. It has a vital importance to Egypt for several decades because of the safe water supply of the country. Therefore, the water quality of the Lake Nasser must be profoundly investigated, and physico-chemical parameter changes of the water of the Lake Nasser should be continuously monitored and assessed. This work describes the present state of the physico-chemical (nitrate-nitrogen, nitrite-nitrogen, orthophosphate, total phosphate content, dissolved oxygen content, chemical oxygen demand, and biological oxygen demand) water parameters of Lake Nasser in Egypt at nine measurement sites along the Lake Nasser. The algorithm was devised at the University of Pannonia, Hungary, for the evaluation of the water quality. The aquatic environmental indices determined alongside the Lake Nasser fall into the category of "good" water quality at seven sampling sites and exhibited "excellent" water quality at two sampling sites according to Egyptian Governmental Decree No. 92/2013. In light of the tremendous demand for safe and healthy water supply in Egypt and international requirements, the water quality assessment is a very important tool for providing reliable information on the water quality. The protocol for water quality assessment could significantly contribute to the provision of high-quality water supply in Egypt. In conclusion, it can be stated that the parameters under investigation in different regions of Lake Nasser fall within the permissible ranges and the water of the Lake has good quality for drinking, irrigation, and fish cultures according to Egyptian standards; however, according to European specifications, there are steps to be accomplished for future water quality improvement.

Aquatic geochemistry status in the south, central, and highland regions of Vietnam.

Aquatic geochemical distribution in the Central, Highland, and Southern regions of Vietnam, including: Da Nang city (Hoa Khanh Industrial Park, Aquaculture Industrial Zone Tho Quang, Do Toa River Deposit Area), Da Lat city (Prenn Pass), Dong Nai province (Suoi Ram hamlet, Cam My district, Long Giao) was investigated by using 2D electrical resistivity tomography (ERT) combined with geochemical analysis. In this research, the correlation between tectonic formation, geochemical composition, and groundwater distribution was assessed between regions. Geochemistry of the Holocene aquifer (from 10 to 30 m underground) was studied considering major ions and trace elements measured in wet and dry seasons. The results of chemometric evaluation show that groundwater in Central Vietnam, Da Nang in particular, has a higher frequency of environmental toxin distribution than in Da Lat and Dong Nai. Groundwater in Da Lat with the advantage of high distribution of K, Ca, Mg, Fe, and Zn. The micro and macro elements such as Co, Mo, Na have high distribution in groundwater in Dong Nai. Meanwhile, groundwater at the study sites in Da Nang showed high concentrations of heavy metals with high toxicity such as, Al, Pb, and Ni. In Da Nang city, the concentration of Pb in groundwater samples from Holocene aquifer ranges between 74 in dry season and 214 ppb in wet season, exceeding the WHO guideline of 21 ppb. There is an increase of mean temperature of groundwater from Holocene aquifer of studied areas, from 17 in wet season to 26.2 °C in dry season. It shows that the ambient temperature effects on the groundwater reflects the relatively surficial character of Holocene aquifer. At the same time, the impact factors, including natural conditions, production methods, customs, and habits were analyzed to formulate the risks and potential risks of geohazards in mechanical construction, infrastructure, civil works, and underground works affecting the social security in the research areas. Through the convection and transfer processes, the electrolyte pollutants such as NaCl, KCl, and acetic acid (the resistivity is about 5.38 Ω m) have been accumulated in groundwater of Da Nang - a developing city with industrial clusters. This problem is similar to Suoi Ram hamlet, where groundwater is also showing signs of pollution due to the use of chemicals in cultivation (mainly cashew nut growth). In terms of density and flow of underground water, according to the results of the electrical images, generally in Suoi Ram Hamlet pollution is much larger than the Hoa Khanh industrial park (Da Nang), which is also quite reasonable because the southern area is lower than the Central and Highland regions. Research contributed importantly in finding the rules of geological distribution, groundwater at elevation topography, of great significance in the earth and environmental science.

Modified Jordanian zeolitic tuff in hydrocarbon removal from surface water.

This work aims to investigate the potential of Jordanian raw zeolitic tuff (RZT) as oil adsorbent for oil-contaminated water. As hydrophobic properties are the primary determinants of effective oil adsorbents, the hydrophobicity of RZT was enhanced by dealumination process; since the degree of hydrophobicity of zeolites is directly dependent on their aluminum content. The microemulsion modification of the dealuminated zeolitic tuff (TZT) was also applied to increase its hydrophobicity. The raw and modified tuffs were characterized in terms of the surface area and porosity (BET), mineral composition (XRD), microstructure and morphology using scanning electron microscopy (SEM) and Fourier-transform infrared spectroscopy (FTIR). In this work, a mixture of water and kerosene was used to examine the hydrophobic/organophilic character of raw and modified zeolitic tuff. Water/dodecane and water/octane mixtures were used to study the kinetics of the adsorption over zeolitic tuff. The results revealed that the sorption capacity using kerosene as a mixed model (water-oil) was enhanced by three- and four-fold for TZT and micro-emulsified zeolitic (MeTZT) tuff respectively. The adsorption capacity of modified zeolitic was compared with that of activated carbon adsorbents.

Aquatic environmental assessment of Lake Balaton in the light of physical-chemical water parameters.

One of the issues of the Hungarian Water Management Strategy is the improvement and upgrading of the water of Lake Balaton. The Water Framework Directive (WFD) specifies and sets forth the achievement of the good ecological status. However, the assessment of the water quality of the lake as a complex system requires a comprehensive monitoring and evaluation procedure. Measurements were carried out around the Lake Balaton at ten different locations/sites and 13 physical-chemical parameters were monitored at each measurement site.For the interpretation of the water chemistry parameters the Aquatic Environmental Assessment (AEA) method devised by authors was used for the water body of the Lake Balaton. The AEA method can be used for all types of the water bodies since it is flexible and using individual weighting procedure for the water chemistry parameters comprehensive information can be obtain. The AEA method was compared with existing EIA methods according to a predefined criterion system and proved to be the most suitable tool for evaluating the environmental impacts in our study.On the basis of the results it can be concluded that the status of the quality of studied area on the Lake Balaton can be categorized as proper quality (from the outcome of the ten measurement sites this conclusion was reached at seven sites).

Surface Characterization of Mechanochemically Modified Exfoliated Halloysite Nanoscrolls.

Surface modifications fundamentally influence the morphology of kaolinite nanostructures as a function of crystallinity and the presence of contaminants. Besides morphology, the catalytic properties of 1:1-type exfoliated aluminosilicates are also influenced by the presence of defect sites that can be generated in a controlled manner by mechanochemical activation. In this work, we investigated exfoliated halloysite nanoparticles with a quasi-homogeneous, scroll-type secondary structure toward developing structural/functional relationships for composition, atomic structure, and morphology. The surface properties of thin-walled nanoscrolls were studied as a function of mechanochemical activation expressed by the duration of dry-grinding. The surface characterizations were carried out using N2, NH3, and CO2 adsorption measurements. The effects of grinding on the nanohalloysite structure were followed using thermoanalytical thermogravimetric/derivative thermogravimetric (TG/DTG) and infrared spectroscopic [Fourier transform infrared/attenuated total reflection (FTIR/ATR)] techniques. Grinding results in partial dehydroxylation with similar changes as those observed for heat treatment above 300 °C. Mechanochemical activation shows a decrease in the dehydroxylation mass loss and the DTG peak temperature, a decrease in the specific surface area and the number of mesopores, an increase in the surface acidity, blue shift of surface hydroxide bands, and a decrease in the intensity of FTIR/ATR bands as a function of the grinding time. The experimental observations were used to guide atomic-scale structural and energetic simulations using realistic molecular cluster models for a nanohalloysite particle. A full potential energy surface description was developed for the mechanochemical activation and/or heating toward nanometahalloysite formation that aids the interpretation of experimental results. The calculated differences upon dehydroxylation show a remarkable agreement with the mass loss values from DTG measurements.