Robotic-assisted plate fixation of the anterior acetabulum - clinical description of a new technique.

INTRODUCTION: We present a detailed procedure for the robotic-assisted plate osteosynthesis of an anterior acetabular fracture. The purpose of this work was to describe a robotic-assisted minimally invasive technique as a possible method for reducing complications, pain, and hospitalization. Another goal was to present technical recommendations and to assess potential pitfalls and problems of the new surgical approach. METHODS: Surgery was performed in an interdisciplinary setting by an experienced orthopedic surgeon and a urologist. The DaVinci System with standard instruments was used. Reduction was achieved through indirect traction of a pin that was introduced into the femoral neck and direct manipulation via the plate. The plate position and fixation were achieved through 7 additional minimally invasive incisions. RESULTS: The technique has multiple advantages, such as no detachment of the rectus abdominal muscle, a small skin incision, and minimal blood loss. Furthermore, this approach might lower the incidence of hernia formation, infection, and postoperative pain. DISCUSSION: We see the presented technique as a demanding yet progressive and innovative surgical method for treating acetabular fractures with indications for anterior plate fixation. TRIAL REGISTRATION: The study was approved by the local institutional review board (Nr. 248/18).

Advances in fixation strength of reorienting rectangular triple pelvic innominate osteotomies - A biomechanical investigation of two screw fixation techniques.

BACKGROUND: Reorientating pelvic osteotomies are performed to prevent femoral-acetabular impingement or degenerative arthritis. A Toennis-Kalchschmidt triple pelvis innominate osteotomy is used in symptomatic patients. This study aimed to investigate the biomechanical behaviour of two different acetabular screw configurations for triple pelvis innominate osteotomy osteosynthesis. METHODS: Two screw-orientation techniques in rectangular os ilium osteotomy were compared by osteotomising 12 artificial hemipelvises with triple pelvis innominate osteotomy protocol (fragment reorientation: 10.5° inclination and 10.0° anteversion) and randomising them in 2 groups (n = 6) for implantation with three 4.5 mm screws. Bidirectional group had a bidirectional screw orientation and Monoaxial group had a monoaxial direction of all three screws through iliac crest. All specimens were tested under progressively increasing cyclic loading until failure. Group-wise comparisons of acetabular cup medialisation, anteversion and inclination were evaluated via motion tracking at cycles 250, 500, 750, 1000, 1250, 1500, 1750, 2000, 2250, and 2500. Failure was defined as reaching 5° inclination or 5° anteversion. FINDINGS: Acetabular cup medialisation (p ≤ 0.026), anteversion (p ≤ 0.021) and inclination (p ≤ 0.039) all increased significantly during testing in both groups. There were no significant differences for the group-wise comparisons at the cycle points defined in the methods (p ≥ 0.182). No significant differences were detected between groups for cycles to failure and failure load (p = 0.873). INTERPRETATION: Bidirectional screw alignment does not lead to significant advantages compared to pure monoaxial if all three axial screws are evenly distributed over the osteotomy geometry. The triple pelvis innominate osteotomy is susceptible to changes in anteversion, inclination and medialisation under partial weight-bearing. Cautious rehabilitation protocols are recommended.

Description of Standardized Planes and Angles for Percutaneous Supra-acetabular Screw Placement.

BACKGROUND: Percutaneous screw fixation for pelvic fractures has become a minimally invasive alternative to an open operation. The complex anatomy of the pelvis renders this procedure challenging. The objective of this study was to assess standardized angles and dimensions of safety zones within a 3 D computed tomography model for optimal supra-acetabular screw placement. METHODS: Computed tomography scans of 107 patients that suffered major trauma without showing any bone injury of the pelvis were collected. Using a software-based analysis, raw computed tomography data were transformed into 3 D models to set standardized landmarks and determine the possible insertion corridor. RESULTS: Screws not exceeding a length of 97 mm in females and 106.4 mm in males were, in 95% of the evaluated cases, insertable without cortical bone penetration. The safety zone was 6.6 mm for females and 7.9 mm for males. Screws not exceeding these diameters were safely insertable in 95% of the cases. For the midsagittal plane, the angle was 36.4 ± 5.1 on the left and 34.7 ± 2.9 on the right (p = 0.008). For the anterior pelvic plane, the angle was 31.3 ± 4.5° on the left and 34.0 ± 4.8° on the right (p = 0.008). CONCLUSIONS: Percutaneous fixation using supra-acetabular screws is a promising method to treat simple supra-acetabular fractures. These results may improve its safe utilization and could facilitate its broader clinical application.

COVID-19 measures as an opportunity to reduce the environmental footprint in orthopaedic and trauma surgery.

Background: Climate change and its consequences on our everyday life have also tremendous impacts on public health and the health of each individual. The healthcare sector currently accounts for 4.4% of global greenhouse gas emissions. The share of the emissions in the health care system caused by the transportation sector is 7%. The study analyses the effect of video consultation on the CO2 emissions during the Covid-19 pandemic in an outpatient clinic of the department of orthopaedics and traumatology surgery at a German university hospital. Methods: The study participants were patients who obtained a video consultation in the period from June to December 2020 and voluntarily completed a questionnaire after the consultation. The type of transport, travel time and waiting time as well as patient satisfaction were recorded by questionnaire. Results: The study comprised 51 consultations. About 70% of respondents would have travelled to the clinic by car. The reduction in greenhouse gas emissions of video consultations compared to a face-to-face presentation was 97% in our model investigation. Conclusion: The video consultation can be a very important part of the reduction of greenhouse gas emissions in the health care system. It also saves time for the doctor and patient and can form an essential part of individual patient care.

Value of Diagnostic Tools in the Diagnosis of Osteomyelitis: Pilot Study to Establish an Osteomyelitis Score.

Osteomyelitis (OM) remains one of the most feared complications in bone surgery and trauma. Its diagnosis remains a major challenge due to lack of guidelines. The aim of this study was to prospectively analyze the value of the most common and available diagnostic tools and to establish an OM score to derive treatment recommendations. All patients with suspected OM were included in a prospective pilot study. All patients underwent blood sampling for C-reactive protein and white blood cell count analysis. Magnetic resonance imaging (MRI), and microbiologic and histopathologic samples, were taken from representative sites of initial debridement. All patients were treated according to their OM test results and followed for at least one year. Subsequently, the value of individual or combined diagnostic tools was analyzed in patients with confirmed OM and in patients in whom OM was ruled out. Based on these findings, an OM score was developed that included MRI, microbiology, and histopathology. The score identified all control patients and all but one OM patient, resulting in a correct diagnosis of 93.3%, which was validated in a second independent larger cohort. This was the first study to analyze the value of the most commonly used tools to diagnose OM. The proposed OM score provides a simple scoring system to safely interpret test results with high accuracy.

Digital health in musculoskeletal care: where are we heading?

BMC Musculoskeletal Disorders launched a Collection on digital health to get a sense of where the wind is blowing, and what impact these technologies are and will have on musculoskeletal medicine. This editorial summarizes findings and focuses on some key topics, which are valuable as digital health establishes itself in patient care. Elements discussed are digital tools for the diagnosis, prognosis and evaluation of rheumatic and musculoskeletal diseases, coupled together with advances in methodologies to analyse health records and imaging. Moreover, the acceptability and validity of these digital advances is discussed. In sum, this editorial and the papers presented in this article collection on Digital health in musculoskeletal care will give the interested reader both a glance towards which future we are heading, and which new challenges these advances bring.

Mechanical and numerical investigations of biodegradable magnesium alloy screws for fracture treatment.

Small fracture treatment includes the use of so-called "Herbert screws". In the past years, novel resorbable materials were introduced as an alternative to the classical titanium implants. The purpose of this study was to evaluate the influence of ongoing resorption/corrosion processes on the mechanical stability screws made from the magnesium alloy MgYREZr®. Our samples consisted of two partly resorbed screws, explanted due to medical reasons after 6 and 12 weeks, respectively, and five unused reference screws. We performed three-point bending tests to determine the stability of all screws. Additionally, with FE-models of the screws based on µCT-scans, we investigated whether any differences in the bending behavior of the screws can be attributed to the reduction of the material volume due to resorption alone. Both partly resorbed screws failed at a lower force than the reference screws (178.6 ± 5.5 N for the reference screws, 72.5 N and 74.5 N for the screw explanted after 6 and 12 weeks, respectively). FE simulations performed with the three different geometries and original material parameters (Young's modulus Enew  = 45 GPa, yield limit σnew  = 235 MPa) showed that the early fracture could not be attributed to the changed geometry alone. Material parameters for the partly resorbed screws were determined by fitting the numerical to the experimental force-displacement curves (E6week  = 15 GPa, σ6week  = 135 MPa and E12week  = 8 GPa, σ12week  = 135 MPa, respectively). Our results showed that both geometry of the screws and different material properties contribute to the overall stability. Understanding and controlling these two factors throughout the resorption process could enhance treatment options.

Femoral defects in revision hip arthroplasty: a therapy-oriented classification.

INTRODUCTION: The complex field of femoral defects in revision hip arthroplasty displays a lack of standardized, intuitive pre- and intraoperative assessment. To address this issue, the femoral defect classification (FDC) is introduced to offer a reliable, reproducible and an intuitive classification system with a clear therapeutic guideline. MATERIALS AND METHODS: The FDC is based on the integrity of the main femoral segments which determine function and structural support. It focuses on the femoral neck, the metaphysis consisting of the greater and lesser trochanter, and the femoral diaphysis. The four main categories determine the location of the defect while subcategories a, b and c are being used to classify the extent of damage in each location. In total, 218 preoperative radiographs were retrospectively graded according to FDC and compared to intraoperatively encountered bone defects. To account for inter-rater and intra-rater agreement, 5 different observers evaluated 80 randomized cases at different points in time. RESULTS: A Cohens kappa of 0.832 ± 0.028 could be evaluated, accounting for excellent agreement between preoperative radiographs and intraoperative findings. To account for inter-rater reliability, 80 patients have been evaluated by 5 different observers. Testing for inter-rater reliability, a Fleiss Kappa of 0.688 could be evaluated falling into the good agreement range. When testing for intra-rater reliability, Cohens Kappa of each of the 5 raters has been analyzed and the mean was evaluated at 0.856 accounting for excellent agreement. CONCLUSION: The FDC is a reliable and reproducible classification system. It combines intuitive use and structured design and allows for consistent preoperative planning and intraoperative guidance. A therapeutic algorithm has been created according to current literature and expert opinion. Due to the combination of the FDC with the recently introduced Acetabular Defect Classification (ADC) a structured approach to the entire field of hip revision arthroplasty is now available.

APP-guided assessment of acetabular defects in hip revision arthroplasty: a structured approach to a complex situation.

INTRODUCTION: Acetabular defect recognition and classification remains a challenging field of practice for orthopedic surgeons. Recently, the Acetabular Defect Classification (ADC) has been introduced to provide a reliable, reproducible and intuitive classification system. In order to improve ease of use and efficiency of the ADC, a browser-based application has been created. We hypothesized that the ADC application can improve rating performance of non-specialists (medical students) to achieve good inter- and intra-rater agreement and will compare favorable to the results of specialists (experienced surgeons) without the help of the application. MATERIALS AND METHODS: The ADC is based on the integrity of the acetabular rim and the supporting structures. It consists of four main types of defects ascending in severity. These defects are further subdivided in A-C, narrowing down defect location. 80 randomized radiographs were graded according to ADC by three non-specialists (medical students) with help of the ADC application and by three specialists (orthopedic surgeons) without help of the application to evaluate the difference in inter-rater agreement between groups. To account for intra-rater agreement, the rating process was repeated after a reasonable wash-out period. RESULTS: Inter-rater and intra-rater agreement within the non-specialist group rated lower when compared to the specialist group while still falling into the good agreement range. The student group presented with k values of 0.61 for inter-rater agreement and 0.68 for intra-rater agreement, while the surgeon group displayed k values of 0.72 for inter-rater agreement and 0.83 for intra-rater agreement. CONCLUSION: The app-guided assessment of acetabular defects offers a promising innovative approach to simplify complex situations. It makes the challenging field of acetabular revision arthroplasty more approachable especially for less experienced surgeons and offers insight and guidance in the planning stage as well as intra-operative setting.

Practicability of a Virtual Consultation to Evaluate the Shoulder Joint. / Durchführbarkeit einer digitalen Sprechstunde zur Untersuchung des Schultergelenkes.

OBJECTIVE: In the course of the corona pandemic, resource conservation and the protection of further infections have made it necessary to break new ground in the organisation of orthopaedic and trauma surgery consultations. One solution is consistent digitisation and the offer of video consultation hours. In this study, non-contact examination of patients with shoulder disorders is described and critically examined. METHODS: Thirty patients who presented with pathologies of the shoulder joint in a university outpatient clinic were subjected to a physical examination in a conventional and contactless manner. The data obtained on mobility, function and provocation test of both examinations were compared to draw conclusions about the virtual feasibility. RESULTS: 46% of the patients suffered from a traumatic shoulder lesion, and 54% showed degenerative lesions. The assessment of mobility showed a high correlation of 70 - 90% between the two examinations. Common tests to evaluate the supraspinatus, infraspinatus, subscapularis and the long head of the biceps could be adequately performed in a contactless version by more than three quarters of the patients, but with low-to-moderate performance values. CONCLUSION: Contact-less examination is particularly disadvantageous when evaluating stability criteria. For the medical history and functional test, there were no significant differences between the classic consultation and contactless consultation. Although virtual consultation is a widespread and valuable addition in pandemic times, it cannot replace a safe assessment and indication by personal examination.

Open Access Redefined: Survey Data and Literature Study on the Impact of Sci-Hub in Orthopaedic Research.

BACKGROUND: Since Alexandra Elbanyan founded Sci-Hub in 2011, the website has been used by a growing number of researchers worldwide. Sci-Hub is a so-called shadow library or guerrilla open access format bypassing publishers' paywalls, giving everyone free access to scientific papers. Until today, there have been no publications about usage by orthopaedic and trauma surgeons of Sci-Hub or other "pirate sites" and how it may influence their work. MATERIALS AND METHODS: Orthopaedic and trauma surgeons of four university hospitals in Germany and Europe were consulted using a standardised questionnaire containing multiple items about the use and evaluation of Sci-Hub. In addition, the Medline and Cochrane databases were screened for all studies related to Sci-Hub. Two reviewers independently reviewed all articles and the references of these articles. RESULTS: Of all orthopaedic surgeons consulted, 69% knew of Sci-Hub and 66.7% used it on a regular basis. Of the younger participants (< 45 years old), 77% knew the webpage, while only 25% of older participants (> 45 years old) knew the webpage. Ninety percent found the quality of their citation and research had been enhanced since using Sci-Hub. On a scale of 1 to 10, user-friendliness was rated with a mean rating of 7.58 (95% CI: 7.262-7.891). Ethical or legal concerns among users seem mixed. On a scale of 1 (no concerns) to 5 (many concerns), the mean score was 2.39 (95% CI: 2.154-2.615). Of doctors using Sci-Hub, 89% would recommend it to other colleagues. CONCLUSION: The quality and number of articles in Sci-Hub is outstanding, and the rate of young researchers using the website is high. The most important shift in literature research for decades is a phenomenon mostly used by young researchers and is not the subject of current research itself. Sci-Hub may have already changed how orthopaedic research works.

Video Based Assessment of Treatment Urgency in Outpatient Orthopaedic and Trauma Patients - a Pilot Trial. / Videobasierte Einschätzung der Behandlungsdringlichkeit - eine Pilotstudie für ambulante Patienten in der Orthopädie und Unfallchirurgie.

INTRODUCTION: When consulting a specialist in orthopaedics and trauma surgery, personal assessment and manual clinical examination by the doctor on site are essential. Nevertheless, implementation of video consultation hours has been made legally easier in Germany. The present pilot study examines the possibility of video-based assessment of the urgency of treatment in outpatient orthopaedic and trauma patients. MATERIALS AND METHODS: Within an ex ante study design, 40 patients with an orthopaedic clinical picture for trauma surgery with elective, urgent or emergency indication were selected from consultation hours. A short questionnaire was filled in based on the information provided and a medical colleague simulated a movement sequence based on the patient information. After modification to the "red flags" and "yellow flags" established in spinal orthopaedics, nine short questions were recorded, which inquire about the urgency of a medical consultation. The video-based movement sequence is based on a 60 s long instruction video in which motor tests and movement sequences are demonstrated: Cervical spine movement in all levels, elevation of the upper extremity, test of the finger-floor distance when "bending forward over-bending", possibility of crouching from standing and getting up again, standing on heels and toes. RESULTS: In 91.1% (n = 328) of the cases, the diagnosis was associated with the same joint or the same pathological entity. In 37.5% (n = 135) of the cases an emergency indication was seen, in 10.8% (n = 39) of the cases an urgent indication and in 51.6% (n = 186) of the cases it was seen to offer an elective indication. 12.5% (n = 45) of the cases were evaluated as "false positives" with regard to an emergency or urgent presentation. This means that the test persons were classified as "emergency" or "urgent", although there was no preventable dangerous course or medical emergency. 18 cases (5%) were evaluated as "false negative". DISCUSSION: The screening questionnaire presented and the short video assessment are technically feasible and practicable method for the initial evaluation in video-based online medical consultation. In addition, the questionnaire presented in combination with the short video assessment was suitable as an instrument for assessing the urgency of the consultation and selecting preventable dangerous processes and acute emergencies. CONCLUSION: The questionnaire, in combination with the short video assessment, is a suitable method for the social distancing requirements during limited accessibility of the medical system. Nevertheless, a false negative rate of 5% is too high to implement the questionnaire presented into daily clinics without further optimisation.

The German version of the Nottingham Clavicle Score is a reliable and valid patient-reported outcome measure to evaluate patients with clavicle and acromioclavicular pathologies.

PURPOSE: The Nottingham Clavicle Score (NCS) is a patient-reported outcome measure developed to evaluate treatment results of clavicle, acromioclavicular and sternoclavicular joint pathologies. Valid, reliable and user-friendly translations of outcome measure instruments are needed to allow comparisons of international results. The aim of this cross-sectional study was to translate and adapt the NCS into German and evaluate the psychometric properties of the German version. METHODS: The translation and cross-cultural adaptation of the NCS were completed using a 'translation-back translation" method and the final version was administered to 105 German-speaking patients. The psychometric properties of this version (NCS-G) were evaluated in terms of feasibility, reliability, validity and sensitivity to change. RESULTS: No major differences occurred between the NCS translations into German and back into English, and no content- or linguistic-related difficulties were reported. The Cronbach's alpha for the NCS-G was 0.885, showing optimal internal consistency. The Intraclass Correlation Coefficient for test-retest reliability was 0.907 (95% CI 0.844-0.945), with a standard error of measurement of 5.59 points and a minimal detectable change of 15.50 points. The NCS-G showed moderate to strong correlation with all other investigated scales (Spearman correlation coefficient: qDASH: ρ = - 0.751; OSS: ρ = 0.728; Imatani Score: ρ = 0.646; CMS: ρ = 0.621; VAS: ρ = - 0.709). Good sensitivity to change was confirmed by an effect size of 1.17 (95% CI 0.89-1.47) and a standardized response mean of 1.23 (95% CI 0.98-1.45). CONCLUSIONS: This study demonstrated that NCS-G is reliable, valid, reproducible and well accepted by patients, showing analogous psychometric properties to the original English version. LEVEL OF EVIDENCE: Level III.

Decision support by machine learning systems for acute management of severely injured patients: A systematic review.

Introduction: Treating severely injured patients requires numerous critical decisions within short intervals in a highly complex situation. The coordination of a trauma team in this setting has been shown to be associated with multiple procedural errors, even of experienced care teams. Machine learning (ML) is an approach that estimates outcomes based on past experiences and data patterns using a computer-generated algorithm. This systematic review aimed to summarize the existing literature on the value of ML for the initial management of severely injured patients. Methods: We conducted a systematic review of the literature with the goal of finding all articles describing the use of ML systems in the context of acute management of severely injured patients. MESH search of Pubmed/Medline and Web of Science was conducted. Studies including fewer than 10 patients were excluded. Studies were divided into the following main prediction groups: (1) injury pattern, (2) hemorrhage/need for transfusion, (3) emergency intervention, (4) ICU/length of hospital stay, and (5) mortality. Results: Thirty-six articles met the inclusion criteria; among these were two prospective and thirty-four retrospective case series. Publication dates ranged from 2000 to 2020 and included 32 different first authors. A total of 18,586,929 patients were included in the prediction models. Mortality was the most represented main prediction group (n = 19). ML models used were artificial neural network ( n = 15), singular vector machine (n = 3), Bayesian network (n = 7), random forest (n = 6), natural language processing (n = 2), stacked ensemble classifier [SuperLearner (SL), n = 3], k-nearest neighbor (n = 1), belief system (n = 1), and sequential minimal optimization (n = 2) models. Thirty articles assessed results as positive, five showed moderate results, and one article described negative results to their implementation of the respective prediction model. Conclusions: While the majority of articles show a generally positive result with high accuracy and precision, there are several requirements that need to be met to make the implementation of such models in daily clinical work possible. Furthermore, experience in dealing with on-site implementation and more clinical trials are necessary before the implementation of ML techniques in clinical care can become a reality.

Proximal Femur Fractures - How Decisive are Reduction and the Chosen Implant? / Osteosynthese bei proximalen Femurfrakturen ­ Wie entscheidend sind Reposition und die Wahl des Implantats?

Proximal femoral fractures are frequent and complex injuries requiring prompt and targeted care. Numerous treatment strategies have been described, some of which have been assessed and clinically implemented clinically. The aim of surgical is always the restoration of a pain-free and stable extremity. Mostly elderly patients are affected and treatment is associated with high postoperative complications and mortality rates. With increasing numbers of patients, the topic is of great medical and economic relevance. In this work, the choice of implants for the osteosynthesis of proximal femoral fractures - as depending on the fracture type - will be examined, as based on a review of current literature. Standard care includes cannulated screws, sliding hips screws and cephalomedullary nails. In addition, the influence of implant positioning, fracture reduction and additional measures such as cement augmentation are evaluated and discussed. Careful fracture reduction and the quality of implant positioning are paramount in order to avoid complications.

Outcome of geriatric proximal humeral fractures: a comparison between reverse shoulder arthroplasty versus open reduction and internal fixation.

Objectives: In view of the increased attention to reverse shoulder arthroplasty (rTSA) as a treatment for complex proximal humeral fractures in the elderly, the present study analyzes in-hospital complications and the postoperative management of rTSA versus open reduction and internal fixation (ORIF). Methods: We retrospectively reviewed patients hospitalized from 2016 to 2018 for proximal humeral fractures (ICD-9 codes: S42.21), III- and IV-part, who underwent an ORIF with locking plates, rTSA or nonoperative treatment. In-hospital complications and postoperative management in both groups were included in the analysis. Results: We included n 190 patients (ORIF 90, rTSA 71, nonoperative 29), more likely to be female (82.1% vs 17.9%; P < .01) with an average age of 82years (min. 72, max. 99; SD 6.4). The ORIF and the rTSA groups showed comparable complication rates (15.6% vs 15%, P = .87) but with a significantly shorter hospital stay (8.6 vs 11.5days; P = .01) and shorter duration of surgery (72.9 vs 87.2 minutes; P = .01) in the ORIF group. Significantly more patients after ORIF achieved an independent life postoperatively (53.3% vs 40.8%; P = .013). Conclusions: In this retrospective analysis, ORIF is related to a shorter duration of surgery, a shorter hospital stay and a higher likelihood of independence. Despite the popularity of the rTSA, ORIF remains a reliable treatment option for proximal humeral fractures in the elderly.Level of evidence: III.

Economic Effects of the SARS-CoV-2 Pandemic in 2020. / Wirtschaftliche Auswirkungen der SARS-CoV-2-Pandemie im Jahr 2020.

INTRODUCTION: In 2020, the SARS-CoV-2 pandemic necessitated an adjustment to the care structure in all medical facilities in Germany. In this study we analysed the effects of the SARS-CoV-2 pandemic using the data from the annual balance sheet of a university department and maximum care provider for orthopaedics and trauma surgery. METHODS: Data analysis was performed on the clinic's performance parameters from 2019 and 2020. The analysis included 52943 outpatient and 7980 inpatient cases, together with the Case Mix Index (CMI), and the costs and revenues. RESULTS: As a result of the reduction in scheduled surgeries, the mean number of inpatients in March and April 2020 decreased by 10.4% (p = 0.004). Due to the focus on complex cases, the CMI increased by 29.5% (p = 0.007). The number of outpatient surgical procedures increased by 16.9% (n = 84). Rising costs of consumables due to the purchase of protective equipment were offset by a reduced need for orthopaedic implants. CONCLUSION: By reducing the number of elective inpatient surgical treatments, the focus was shifted to treating complex cases; this is reflected in the increased CMI. Due to internal compensation mechanisms, the clinic was able to conserve intensive care capacities while still achieving an increase in revenue.

Surgical Anatomy of the Radial Nerve at the Dorsal Region of the Humerus: A Cadaveric Study.

BACKGROUND: Surgery for humeral shaft fractures is associated with a high risk of iatrogenic radial nerve palsy (RNP). Plausible causes are difficult anatomical conditions and variants. METHODS: We performed a cadaveric study with 23 specimens (13 female and 10 male Caucasian donors) to assess the course and anatomy of the radial nerve (RN) with its branches alongside the humeral shaft. The accuracy of identification of the RN in the surgical field was analyzed by measuring the location, course, diameter, and form of each nerve and vessel of interest. RESULTS: The RN is not a single structure running alongside the humeral shaft; at least 4 parallel structures crossed the dorsal humerus in all subjects. The RN was accompanied by 2 vessels and at least 1 other nerve, which we named the musculocutaneous branch (MCB). With an oval profile and an average diameter of 3.1 mm (range, 2.6 to 3.8 mm), the MCB was thinner but, in some cases, close to the average diameter of 4.7 mm (range, 4.0 to 5.2 mm) of the RN, which had a round profile. Both accompanying vessels had similar diameters: 3.5 mm (range, 2.6 to 4.2 mm) for the radial collateral artery and 4.0 mm (range, 2.9 to 4.4 mm) for the medial collateral artery. In 20 (87%) of the cases, the RN ran proximal to and in 3 (13%) of the cases, distal to the MCB. Furthermore, a distal safe zone of at least 110 mm (range, 110 to 160 mm) was found, measured from the radial (lateral) epicondyle proximally. CONCLUSIONS: The RN does not cross the dorsal humerus alone, as often stated in anatomical textbooks, but runs parallel to vessels and at least 1 nerve branch with a similar appearance. Thus, for reliable preservation of the RN, we recommend identification and protection of all crossing structures in posterior humeral surgeries 110 mm proximal to the radial epicondyle.

Locking plate osteosynthesis of scaphoid nonunion with severe bone defects: a case series.

The treatment of scaphoid nonunion can be challenging with increasing defect size. We evaluated the outcome of scaphoid nonunion with a substantial bone defect treated with a multidirectional locking plate combined with cancellous bone grafting only. Thirteen patients with significant osseous defects measuring 6 mm or more suffering from primary nonunion without treatment (n = 6) or recalcitrant nonunion following Herbert screw osteosynthesis (n = 7) were treated and reviewed retrospectively. The stabilization was performed after debridement, autologous cancellous bone grafting and volar locking plate osteosynthesis. After a mean follow-up period of 12 months, 12 of the 13 patients achieved successful unions with a free range of motion and complete remittance of pain in everyday activity. The mean scapholunate angle decreased from 59.7° ± 11 to 43.9° ± 5 (effect strength d:1.7, p < 0.00001), scaphoid humpback deformity angle from 58.9° ± 8 to 45.1° ± 8 (d:1.8, p < 0.0001), whereas strength of the injured hand increased from 36.4 kg ± 10 to 42.4 kg ± 9 (d:1.4, p < 0.0001). One nonunion persisted without fragment dislocation receiving revision after 1 year. Thus, locking plate osteosynthesis with cancellous bone grafting is a valid alternative in scaphoid nonunions with extensive bone defects. Additionally, stable retention of the fragments prevents dislocation even in delayed or persistent nonunion. Further prospective studies are required to confirm these findings.

Are orthopaedic surgeons prepared? An analysis of severe casualties from the 2021 flash flood and mudslide disaster in Germany.

BACKGROUND: The purpose of this study was to describe and analyse the most severe casualties from the flash flood and mudslides occurring on 14 July 2021 in Germany, focusing on patients who were treated in the closest and largest level I trauma centre in the region the disaster occurred. METHODS: A single-centre retrospective study design was employed, and all patients treated because of the flooding and mudslides who needed inpatient treatment were documented. Data on each patient's demographic characteristics, type of injury, number of surgeries, duration of hospitalisation, operation time, revision rate, injury severity score (ISS), and complications were collected. The primary outcome measure was status at discharge. RESULTS: Within the first week after the flood, a total of 63 patients were documented. Forty-one patients were treated on an outpatient basis in the emergency unit, and 22 patients were hospitalised. Of those hospitalised, 15 patients needed surgical treatment in the operation theatre. The most common injuries were fractures of the lower extremity (n = 7) and soft tissue wounds (n = 4). Overall, 20 surgeries were performed; the mean hospital stay was 7.2 ± 6.4 days, and the mean ISS was 5.7 ± 2.7. CONCLUSION: The July 2021 flood disaster was one of the largest in German history. The included patients showed complex injuries of various types. Because of the effects of climate change, orthopaedic surgeons might face higher numbers of casualties affected by natural disasters. Learning more about the management and profile of these injuries can become a future challenge for orthopaedic and trauma surgeons.