Photodegradation Protection in 2D In-Plane Heterostructures Revealed by Hyperspectral Nanoimaging: The Role of Nanointerface 2D Alloys.

Single-layer heterostructures exhibit striking quasiparticle properties and many-body interaction effects that hold promise for a range of applications. However, their properties can be altered by intrinsic and extrinsic defects, thus diminishing their applicability. Therefore, it is of paramount importance to identify defects and understand 2D materials' degradation over time using advanced multimodal imaging techniques. Here we implemented a liquid-phase precursor approach to synthesize 2D in-plane MoS2-WS2 heterostructures exhibiting nanoscale alloyed interfaces and map exotic interface effects during photodegradation using a combination of hyperspectral tip-enhanced photoluminescence and Raman and near-field nanoscopy. Surprisingly, 2D alloyed regions exhibit thermal and photodegradation stability providing protection against oxidation. Coupled with surface and interface strain, 2D alloy regions create stable localized potential wells that concentrate excitonic species via a charge carrier funneling effect. These results demonstrate that 2D alloys can withstand extreme degradation effects over time and could enable stable 2D device engineering.

Enhanced Surface Activity of MWW Zeolite Nanosheets Prepared via a One-Step Synthesis.

The synthesis of two-dimensional (2D) zeolites has garnered attention due to their superior properties for applications that span catalysis to selective separations. Prior studies of 2D zeolite catalysts demonstrated enhanced mass transport for improved catalyst lifetime and selectivity. Moreover, the significantly higher external surface area of 2D materials allows for reactions of bulky molecules too large to access interior pores. There are relatively few protocols for preparing 2D materials, owing to the difficultly of capping growth in one direction to only a few unit cells. To accomplish this, it is often necessary to employ complex, commercially unavailable organic structure-directing agents (OSDAs) prepared via multistep synthesis. However, a small subset of zeolite structures exist as naturally layered materials where postsynthesis steps can be used to exfoliate samples and produce ultrathin 2D nanosheets. In this study, we selected a common layered zeolite, the MWW framework, to explore methods of preparing 2D nanosheets via one-pot synthesis in the absence of complex organic templates. Using a combination of high-resolution microscopy and spectroscopy, we show that 2D MMW-type layers with an average thickness of 3.5 nm (ca. 1.5 unit cells) can be generated using the surfactant cetyltrimethylammonium (CTA), which operates as a dual OSDA and exfoliating agent to affect Al siting and to eliminate the need for postsynthesis exfoliation, respectively. We tested these 2D catalysts using a model reaction that assesses external (surface) Brønsted acid sites and observed a marked increase in the conversion relative to three-dimensional MWW (MCM-22) and 2D layers prepared from postsynthesis exfoliation (ITQ-2). Collectively, our findings identify a facile and effective route to directly synthesize 2D MWW-type materials, which may prove to be more broadly applicable to other layered zeolites.

Continuously Tuning Epitaxial Strains by Thermal Mismatch.

Strain engineering of thin films is a conventionally employed approach to enhance material properties and to energetically prefer ground states that would otherwise not be attainable. Controlling strain states in perovskite oxide thin films is usually accomplished through coherent epitaxy by using lattice-mismatched substrates with similar crystal structures. However, the limited choice of suitable oxide substrates makes certain strain states experimentally inaccessible and a continuous tuning impossible. Here, we report a strategy to continuously tune epitaxial strains in perovskite films grown on Si(001) by utilizing the large difference of thermal expansion coefficients between the film and the substrate. By establishing an adsorption-controlled growth window for SrTiO3 thin films on Si using hybrid molecular beam epitaxy, the magnitude of strain can be solely attributed to thermal expansion mismatch, which only depends on the difference between growth and room temperature. Second-harmonic generation measurements revealed that structure properties of SrTiO3 films could be tuned by this method using films with different strain states. Our work provides a strategy to generate continuous strain states in oxide/semiconductor pseudomorphic buffer structures that could help achieve desired material functionalities.

Low-temperature Synthesis of Heterostructures of Transition Metal Dichalcogenide Alloys (WxMo1-xS2) and Graphene with Superior Catalytic Performance for Hydrogen Evolution.

Large-area (∼cm2) films of vertical heterostructures formed by alternating graphene and transition-metal dichalcogenide (TMD) alloys are obtained by wet chemical routes followed by a thermal treatment at low temperature. In particular, we synthesized stacked graphene and WxMo1-xS2 alloy phases that were used as hydrogen evolution catalysts. We observed a Tafel slope of 38.7 mV dec-1 and 96 mV onset potential (at current density of 10 mA cm-2) when the heterostructure alloy was annealed at 300 °C. These results indicate that heterostructures formed by graphene and W0.4Mo0.6S2 alloys are far more efficient than WS2 and MoS2 by at least a factor of 2, and they are superior compared to other reported TMD systems. This strategy offers a cheap and low temperature synthesis alternative able to replace Pt in the hydrogen evolution reaction (HER). Furthermore, the catalytic activity of the alloy is stable over time, i.e., the catalytic activity does not experience a significant change even after 1000 cycles. Using density functional theory calculations, we found that this enhanced hydrogen evolution in the WxMo1-xS2 alloys is mainly due to the lower energy barrier created by a favorable overlap of the d-orbitals from the transition metals and the s-orbitals of H2; with the lowest energy barrier occurring for the W0.4Mo0.6S2 alloy. Thus, it is now possible to further improve the performance of the "inert" TMD basal plane via metal alloying, in addition to the previously reported strategies such as creation of point defects, vacancies and edges. The synthesis of graphene/W0.4Mo0.6S2 produced at relatively low temperatures is scalable and could be used as an effective low cost Pt-free catalyst.

Optical identification of sulfur vacancies: Bound excitons at the edges of monolayer tungsten disulfide.

Defects play a significant role in tailoring the optical properties of two-dimensional materials. Optical signatures of defect-bound excitons are important tools to probe defective regions and thus interrogate the optical quality of as-grown semiconducting monolayer materials. We have performed a systematic study of defect-bound excitons using photoluminescence (PL) spectroscopy combined with atomically resolved scanning electron microscopy and first-principles calculations. Spatially resolved PL spectroscopy at low temperatures revealed bound excitons that were present only on the edges of monolayer tungsten disulfide and not in the interior. Optical pumping of the bound excitons was sublinear, confirming their bound nature. Atomic-resolution images reveal that the areal density of monosulfur vacancies is much larger near the edges (0.92 ± 0.45 nm-2) than in the interior (0.33 ± 0.11 nm-2). Temperature-dependent PL measurements found a thermal activation energy of ~36 meV; surprisingly, this is much smaller than the bound-exciton binding energy of ~300 meV. We show that this apparent inconsistency is related to a thermal dissociation of the bound exciton that liberates the neutral excitons from negatively charged point defects. First-principles calculations confirm that sulfur monovacancies introduce midgap states that host optical transitions with finite matrix elements, with emission energies ranging from 200 to 400 meV below the neutral-exciton emission line. These results demonstrate that bound-exciton emission induced by monosulfur vacancies is concentrated near the edges of as-grown monolayer tungsten disulfide.

Current status and future directions for in situ transmission electron microscopy.

This review article discusses the current and future possibilities for the application of in situ transmission electron microscopy to reveal synthesis pathways and functional mechanisms in complex and nanoscale materials. The findings of a group of scientists, representing academia, government labs and private sector entities (predominantly commercial vendors) during a workshop, held at the Center for Nanoscale Science and Technology- National Institute of Science and Technology (CNST-NIST), are discussed. We provide a comprehensive review of the scientific needs and future instrument and technique developments required to meet them.

Freestanding van der Waals heterostructures of graphene and transition metal dichalcogenides.

Vertical stacking of two-dimensional (2D) crystals has recently attracted substantial interest due to unique properties and potential applications they can introduce. However, little is known about their microstructure because fabrication of the 2D heterostructures on a rigid substrate limits one's ability to directly study their atomic and chemical structures using electron microscopy. This study demonstrates a unique approach to create atomically thin freestanding van der Waals heterostructures-WSe2/graphene and MoS2/graphene-as ideal model systems to investigate the nucleation and growth mechanisms in heterostructures. In this study, we use transmission electron microscopy (TEM) imaging and diffraction to show epitaxial growth of the freestanding WSe2/graphene heterostructure, while no epitaxy is maintained in the MoS2/graphene heterostructure. Ultra-high-resolution aberration-corrected scanning transmission electron microscopy (STEM) shows growth of monolayer WSe2 and MoS2 triangles on graphene membranes and reveals their edge morphology and crystallinity. Photoluminescence measurements indicate a significant quenching of the photoluminescence response for the transition metal dichalcogenides on freestanding graphene, compared to those on a rigid substrate, such as sapphire and epitaxial graphene. Using a combination of (S)TEM imaging and electron diffraction analysis, this study also reveals the significant role of defects on the heterostructure growth. The direct growth technique applied here enables us to investigate the heterostructure nucleation and growth mechanisms at the atomic level without sample handling and transfer. Importantly, this approach can be utilized to study a wide spectrum of van der Waals heterostructures.

Science and technology of biocompatible thin films for implantable biomedical devices.

This presentation focuses on reviewing research to develop two critical biocompatible film technologies to enable implantable biomedical devices, namely: 1) development of bioinert/biocompatible coatings for encapsulation of Si chips implantable in the human body (e.g., retinal prosthesis implantable in the human eye)-the coating involves a novel ultrananocrystalline diamond (UNCD) film or hybrid biocompatible oxide/UNCD layered films; and 2) development of biocompatible films with high-dielectric constant and microfabrication process to produce energy storage super-capacitors embedded in the microchip to achieve full miniaturization for implantation into the human bodynovel Al2O3/TiO2 nanolaminates exhibit abnormally high dielectric constant to enable super-capacitors with very high-capacitance.

First application of Cc-corrected imaging for high-resolution and energy-filtered TEM.

Contrast-transfer calculations indicate that C(c) correction should be highly beneficial for high-resolution and energy-filtered transmission electron microscopy. A prototype of an electron optical system capable of correcting spherical and chromatic aberration has been used to verify these calculations. A strong improvement in resolution at an acceleration voltage of 80 kV has been measured. Our first C(c)-corrected energy-filtered experiments examining a (LaAlO(3))(0.3)(Sr(2)AlTaO(6))(0.7)/LaCoO(3) interface demonstrated a significant gain for the spatial resolution in elemental maps of La.