Pilot-scale production and in-situ application of petroleum-degrading enzyme cocktail from Alcanivorax borkumensis.

Petroleum degrading enzymes can be used as an alternative way to improve petroleum bioremediation approaches. Alcanivorax borkumensis is an alkane-degrading bacteria that can produce petroleum degrading enzymes such as alkane hydroxylase and lipase. In this study, pilot-scale Alcanivorax borkumensis fermentation was developed for producing large volumes of petroleum degrading enzymes cocktail (∼900 L). Different process conditions, such as inoculum age 72 h and size 4% v/v, temperature 30 ± 1 °C, agitation speed at 150 rpm and, fermentation period 3 days were determined as the optimum for producing alkane hydroxylase and lipase activity. The oxygen transfer capacity was studied for obtaining better bacterial growth and higher enzyme activities in bioreactor process optimization as well as scale-up. Results showed that the maximum values of oxygen mass transfer coefficient (kLa), oxygen uptake rate (OUR), oxygen transfer rate (OTR), alkane hydroxylase, lipase, and cell count were 196.95 h-1, 0.92 mmol O2/L/h, 1.8 mmol O2/L/h, 222.49 U/mL, 325 U/mL, and 8.6 × 1010 CFU/mL, respectively. Compared with the bench-scale bioreactors, the 150 L fermenter showed a better oxygen transfer rate which affected the cell growth that doubled the number and enzymes production that increased. Then, the enzyme cocktail was used for a field test in a diesel source zone using a 5-spot well pattern. The results showed a significant reduction in concentrations of C10 - C50 (from 36% to > 99%) after one injection of enzyme cocktail, mainly for the contaminated soils located in the saturated zone of the unconfined aquifer. This study confirmed the scaling-up ofalkane-degrading enzyme production to an industrial-scale and its application for effective bioremediation of petroleum contaminated sites.

Column tests for evaluation of the enzymatic biodegradation capacity of hydrocarbons (C10-C50) contaminated soil.

Though many studies pertaining to soil bioremediation have been performed to study the microbial kinetics in shake flasks, the process efficiency in column tests is seldom. In the present study, soil columns tests were carried out to study the biodegradation of soil contaminated with a high concentration of diesel (≈19.5 g/kg) petroleum hydrocarbons expressed as C10-C50. Experiments were done with crude enzymatic cocktail produced by the hydrocarbonoclastic bacterium, Alcanivorax borkumensis. A. borkumensis was grown on a media with 3% (v/v) motor oil as the sole carbon and energy source. The effects of the enzyme concentration, treatment time and oxidant on the bioremediation efficiency of C10-C50 were investigated. A batch test was also carried out in parallel to investigate the stability of the enzymes and the effect of the biosurfactants on the desorption and the bioconversion of C10-C50. Batch tests indicated that the biosurfactants significantly affected the desorption and alkane hydroxylase and lipase enzymes, maintained their catalytic activity during the 20-day test, with a half-life of 7.44 days and 8.84 days, respectively. The crude enzyme cocktail, with 40 U/mL of lipase and 10 U/mL of alkane hydroxylase, showed the highest conversion of 57.36% after 12 weeks of treatment with a degradation rate of 0.0218 day-1. The results show that the soil column tests can be used to optimize operating conditions for hydrocarbon degradation and to assess the performance of the overall bioremediation process.

Bench-scale production of enzymes from the hydrocarbonoclastic bacteria Alcanivorax borkumensis and biodegradation tests.

This study investigates motor oil (3, 5, 7.5 and 10% (v v-1)) as a sole carbon source for the production of Alcanivorax borkumensis in shake flasks and a 5 L bench-scale fermenter in comparison to the standard media. Shake flask studies showed a significant and higher cell growth (p=0.000038), lipase (p = 0.006900) and alkane hydroxylase production (p = 0.000921) by Alcanivorax borkumensis when motor oil was used as the substrate. Based on Tukey post-hoc tests, 5% motor oil concentration was selected as the optimal substrate concentration. The 5 L fermenter experiments conducted using motor oil at 5% (v v-1) concentration, under controlled conditions exhibited significant and higher alkane hydroxylase and lipase activities (55.6 U mL-1 (p = 0.018418) and 208.30 U mL-1 (p = 0.020087), respectively) as compared with those of motor oil at 3% (v v-1) and n-hexadecane at 3% (v v-1) concentration which was used as control. Cell growth was significantly higher when motor oil (3 or 5%) was used as a substrate (p = 0.024705). Enzymatic degradation tested on two different polycyclic aromatic hydrocarbons (PAHs) contaminated groundwaters showed 37.4% removal after 5 days with a degradation rate of 196.6 ppb day-1 and 82.8% removal after 10 days with a degradation rate of 217.54 ppb day-1 for the 1st site and an almost complete biodegradation with 95% removal and 499.02 ppb day-1 removal rate after only 5 days for the 2nd site.

Production and characterization of novel hydrocarbon degrading enzymes from Alcanivorax borkumensis.

This study investigates the production of alkane hydroxylase, lipase and esterase by the marine hydrocarbon degrading bacteria Alcanivorax borkumensis. The focus of this study is the remediation of petroleum hydrocarbons, hexane, hexadecane and motor oil as model substrates. A. borkumensis showed an incremental growth on these substrates with a high cell count. Growth on motor oil showed highest alkane hydroxylase and lipase production of 2.62 U/ml and 71 U/ml, respectively, while growth on hexadecane showed the highest esterase production of 57.5 U/ml. The percentage of hexane, hexadecane, and motor oil degradation during A. borkumensis growth after 72 h, was around 80%, 81.5% and 75%, respectively. Zymogram showed two different bands with a molecular weight of approx. 52 and 40 kDa, respectively with lipase and esterase activity. Alkane hydroxylase reached optimum activity at pH 8.0 and 70 ±â€¯1 °C for hexane and hexadecane and 75 ±â€¯1 °C for motor oil. Lipase and esterase showed optimum activity at 35 ±â€¯1 °C and 40 ±â€¯1 °C, respectively and pH 7.0. The crude enzymes showed higher stability in a wide range of pH, but they were not thermostable at higher temperatures.

Biodegradation of polycyclic aromatic hydrocarbons (PAHs) by fungal enzymes: A review.

Polycyclic aromatic hydrocarbons (PAHs) are a large group of chemicals. They represent an important concern due to their widespread distribution in the environment, their resistance to biodegradation, their potential to bioaccumulate and their harmful effects. Several pilot treatments have been implemented to prevent economic consequences and deterioration of soil and water quality. As a promising option, fungal enzymes are regarded as a powerful choice for degradation of PAHs. Phanerochaete chrysosporium, Pleurotus ostreatus and Bjerkandera adusta are most commonly used for the degradation of such compounds due to their production of ligninolytic enzymes such as lignin peroxidase, manganese peroxidase and laccase. The rate of biodegradation depends on many culture conditions, such as temperature, oxygen, accessibility of nutrients and agitated or shallow culture. Moreover, the addition of biosurfactants can strongly modify the enzyme activity. The removal of PAHs is dependent on the ionization potential. The study of the kinetics is not completely comprehended, and it becomes more challenging when fungi are applied for bioremediation. Degradation studies in soil are much more complicated than liquid cultures because of the heterogeneity of soil, thus, many factors should be considered when studying soil bioremediation, such as desorption and bioavailability of PAHs. Different degradation pathways can be suggested. The peroxidases are heme-containing enzymes having common catalytic cycles. One molecule of hydrogen peroxide oxidizes the resting enzyme withdrawing two electrons. Subsequently, the peroxidase is reduced back in two steps of one electron oxidation. Laccases are copper-containing oxidases. They reduce molecular oxygen to water and oxidize phenolic compounds.