High-power single-frequency single-mode all-solid photonic bandgap fiber laser with kHz linewidth.

There have been several demonstrations of single-frequency single-mode ytterbium-doped fiber lasers operating at a few hundred watts of power. A narrow spectral linewidth of these lasers is critical for many applications but has never been properly measured before at high powers. In this work, we report the first spectral linewidth measurement at kHz resolution of high-power single-frequency fiber lasers using a heterodyne technique and can confirm that these lasers can indeed operate at a few kHz spectral linewidth. Furthermore, we have improved the power from single-frequency single-mode all-solid photonic bandgap fiber lasers to 500 W using an improved photonic bandgap fiber.

4.8 mJ pulse energy directly from single-mode Q-switched ytterbium fiber lasers.

Using an ytterbium-doped fiber with a 50 µm core and 0.028 NA, a pulse energy of 4.8 mJ was achieved directly from a single-mode Q-switched fiber laser. The repetition rate was 10 kHz and the average power was 48.4 W. The slope efficiencies with regard to the absorbed and launched pump power were ∼74% and ∼59% respectively. The pulse width decreased with increasing pump power. The 4.8 mJ pulse had a FWHM width of ∼300 ns. A shorter pulse of ∼200 ns FWHM was also achieved at 2.06 mJ in another configuration. The M2 was below 1.3 at all pulse energies. This work demonstrates record pulse energy directly from a single-mode Q-switched fiber laser and the feasibility of operating such a laser with high efficiencies.

kW-level monolithic single-mode narrow-linewidth all-solid photonic bandgap fiber amplifier.

Further power scaling of narrow-linewidth fiber lasers is critical for beam combining. Using all-solid photonic bandgap fibers with large effective mode areas and strong higher-order-mode suppression is an interesting approach. Previously, we demonstrated ∼400W single-frequency single-mode power at 1064 nm from a 50/400 photonic bandgap fiber amplifier, limited only by transverse mode instability (TMI). In this work, we demonstrate a TMI-limited single-mode power of 1.37 kW from a monolithic fiber amplifier with a 25/400 photonic bandgap fiber, the highest output power from a photonic bandgap fiber demonstrated to date, to the best of our knowledge. The spectral linewidth is broadened to ∼8GHz to suppress stimulated Brillouin scattering.

302 W single-mode power from an Er/Yb fiber MOPA: publisher's note.

This publisher's note contains corrections to Opt. Lett.45, 2910 (2020).OPLEDP0146-959210.1364/OL.392786.

Modeling Er/Yb fiber lasers at high powers.

Conventional models of Er/Yb co-doped fibers assume all ytterbium ions are equally involved in the energy transfer with erbium ions, governed by a singular transfer rate. This would predict output power clamping once ytterbium parasitic lasing starts, contrary to the observations that the output continued to grow albeit at a slower rate. One study explained this using elevated temperature at high powers. Our study, however, shows that elevated temperature and mode-dependent effects only play insignificant roles. A new model is developed based on the existence of isolated ytterbium ions, which can explain all the observed experimental behaviors.

302 W single-mode power from an Er/Yb fiber MOPA.

There has been very little progress in the power scaling of Er/Yb fiber lasers in over a decade, reflecting the difficulties involved. Here we report, to the best of our knowledge, a new record of 302 W single-mode power from an Er/Yb fiber master oscillator power amplifier (MOPA) with a record optical efficiency of 56%, near the quantum limit. This is made possible by new fiber development from Nufern and off-resonant pumping of the Er/Yb fiber. We also show that further power scaling is no longer limited by ytterbium parasitic lasing but by fiber fuse in the Er/Yb fiber.

151W monolithic diffraction-limited Yb-doped photonic bandgap fiber laser at ~978nm.

We demonstrate that the strong 4-level Yb emission in a fiber laser can be almost completely suppressed in an Yb all-solid double-clad photonic bandgap fiber, resulting in highly efficient high-power monolithic Yb fiber lasers operating at the 3-level system. We have achieved single-mode continuous wave laser output power of ~151W at ~978nm with an efficiency of 63% with respect to the launched pump power in a practical monolithic fiber laser configuration for the first time. The demonstrated power in this work are setting new records for diffraction-limited double-clad fiber lasers operating at ~978nm.

Efficient 240W single-mode 1018nm laser from an Ytterbium-doped 50/400µm all-solid photonic bandgap fiber.

Lowering the quantum defect by tandem pumping with fiber lasers at 1018nm was critical for achieving the record 10kW single-mode ytterbium fiber laser. Here we report the demonstration of an efficient directly-diode-pumped single-mode ytterbium fiber laser with 240W at 1018nm. The key for the combination of high efficiency, high power and single-mode at 1018nm is an ytterbium-doped 50µm/400µm all-solid photonic bandgap fiber, which has a practical all-solid design and a pump cladding much larger than those used in previous demonstrations of single-mode 1018nm ytterbium fiber lasers, enabling higher pump powers. Efficient high-power single-mode 1018nm fiber laser is critical for further power scaling of fiber lasers and the all-solid photonic bandgap fiber can potentially be a significant enabling technology.

Large-mode-area fibers operating near single-mode regime.

Lower NA in large-mode-area fibers enables better single-mode operation and larger core diameters. Fiber NA has traditionally been limited to 0.06, mostly due to the control tolerance in the fabrication process. It has been recognized recently that transverse mode instability is a major limit to average power scaling in fiber lasers. One effective method to mitigate this limit is to operate nearer to the single-mode regime. Lower fiber NA is critical in this since it allows relatively larger core diameters which is the key to mitigate the limits imposed by nonlinear effects. We have developed a fabrication process of ytterbium-doped silica glass which is capable of highly accurate refractive index control and sufficient uniformity for LMA fibers. This process is also capable of large-volume production. It is based on a significant amount of post-processing once the fiber preforms are made. We have demonstrated 30/400 and 40/400 LMA fibers with a NA of ~0.028 operating very close to the single-mode regime. The second-order mode cuts off at ~1.2µm and ~1.55µm respectively. We have also studied issues related to bend losses due to the low NA and further optimization of LMA fibers.

Polarizing ytterbium-doped all-solid photonic bandgap fiber with ~1150µm(2) effective mode area.

We demonstrate an Yb-doped polarizing all-solid photonic bandgap fiber for single-polarization and single-mode operation with an effective mode area of ~1150µm(2), a record for all-solid photonic bandgap fibers. The differential polarization mode loss is measured to be >5dB/m over the entire transmission band with a 160nm bandwidth and >15dB/m on the short wavelength edge of the band. A 2.6m long fiber was tested in a laser configuration producing a linearly polarized laser output with a PER value of 21dB without any polarizer, the highest for any fiber lasers based on polarizing fibers.

Quantitative mode quality characterization of fibers with extremely large mode areas by matched white-light interferometry.

Quantitative mode characterization of fibers with cores much beyond 50µm is difficult with existing techniques due to the combined effects of smaller intermodal group delays and dispersions. We demonstrate, for the first time, a new method using a matched white-light interferometry (MWI) to cancel fiber dispersion and achieve finer temporal resolution, demonstrating ~20fs temporal resolution in intermodal delays, i.e. 6µm path-length resolution. A 1m-long straight resonantly-enhanced leakage-channel fiber with 100µm core was characterized, showing ~55fs/m relative group delay and a ~29dB mode discrimination between the fundamental and second-order modes.

Ytterbium-doped large-mode-area all-solid photonic bandgap fiber lasers.

Single-mode operation in a large-mode-area fiber laser is highly desired for power scaling. We have, for the first time, demonstrated a 50µm-core-diameter Yb-doped all-solid photonic bandgap fiber laser with a mode area over 4 times that of the previous demonstration. 75W output power has been generated with a diffraction-limited beam and an efficiency of 70% relative to the launched pump power. We have also experimentally confirmed that a robust single-mode regime exists near the high frequency edge of the bandgap. These fibers only guide light within the bandgap over a narrow spectral range, which is essential for lasing far from the gain peak and suppression of stimulated Raman scattering. This work demonstrates the strong potential for mode area scaling of in single-mode all-solid photonic bandgap fibers.

Flat-top mode from a 50 µm-core Yb-doped leakage channel fiber.

We demonstrate for the first time a flat-top mode from a 50 µm-core Yb-doped leakage channel fiber (LCF). The flat intensity distribution leads to an effective mode area of ~1880 µm(2) in the straight fiber, an over 50% increase comparing to that of regular LCF with the same core diameter. The flat-top mode was achieved by using a uniform Yb-doped silica glass in the core center with an index of ~2 × 10(-4) lower than that of the silica background. The fiber was also tested in a laser configuration, demonstrating an optical-to-optical efficiency of ~77% at 1026 nm with respect to the pump at 975 nm.