ABSTRACT
The stable operation of the CO2 reduction reaction (CO2RR) in membrane electrode assembly (MEA) electrolyzers is known to be hindered by the accumulation of bicarbonate salt, which are derived from alkali metal cations in anolytes, on the cathode side. In this study, we conducted a quantitative evaluation of the correlation between the CO2RR activity and the transported alkali metal cations in MEA electrolyzers. As a result, although the presence of transported alkali metal cations on the cathode surface significantly contributes to the generation of C2+ compounds, the rate of K+ ion transport did not match the selectivity of C2+, suggesting that a continuous supply of high amount of K+ to the cathode surface is not required for C2+ formation. Based on these findings, we achieved a faradaic efficiency (FE) and a partial current density for C2+ of 77 % and 230â mA cm-2, respectively, even after switching the anode solution from 0.1â M KHCO3 to a dilute K+ solution (<7â mM). These values were almost identical to those when 0.1â M KHCO3 was continuously supplied. Based on this insight, we successfully improved the durability of the system against salt precipitation by intermittently supplying concentrated KHCO3, compared with the continuous supply.
ABSTRACT
Aperture shape and size of flexible hydrogen-bonded organic frameworks (HOF) were statically modulated using various aromatic solvents, and dynamically changed by desorption and adsorption of the solvent molecules.
Subject(s)
Hydrogen , Pyrenes , Adsorption , SolventsABSTRACT
Three-dimensionally ordered nanoporous structures were generated in carbon materials doped with metals and nitrogen as catalytically active sites for electrochemical reactions. Free-base and metal phthalocyanines with a strategically designed molecular structure were used as carbon sources to obtain an ordered porous structure via homogeneous self-assembly with Fe3O4 nanoparticles as the pore template and the prevention of melting away during carbonization. The doping of Fe and nitrogen was achieved by a reaction between the free-base phthalocyanine and Fe3O4 through carbonization at 550 °C, while Co and Ni were doped using the corresponding metal phthalocyanines. The preference of these three types of ordered porous carbon materials for catalytic reactions was distinctly determined by the doped metals. Fe-N-doped carbon showed the highest activity for O2 reduction. Additional heat treatment at 800 °C enhanced this activity. CO2 reduction and H2 evolution were preferred by the Ni- and Co-N-doped carbon materials, respectively. A change in the template particle size was capable of controlling the pore size to enhance mass transfer and improve performance. The technique presented in this study enabled systematic metal doping and pore size control in the ordered porous structures of carbonaceous catalysts.
Subject(s)
Carbon , Nitrogen , Carbon/chemistry , Nitrogen/chemistry , Porosity , Metals , CatalysisABSTRACT
Bottom-up electrochemical synthesis of atomically thin materials is desirable yet challenging, especially for non-van der Waals (non-vdW) materials. Thicknesses below a few nanometers have not been reported yet, posing the question how thin can non-vdW materials be electrochemically synthesized. This is important as materials with (sub-)unit-cell thickness often show remarkably different properties compared to their bulk form or thin films of several nanometers thickness. Here, a straightforward electrochemical method utilizing the angstrom-confinement of laminar reduced graphene oxide (rGO) nanochannels is introduced to obtain a centimeter-scale network of atomically thin (<4.3 Å) 2D-transition metal oxides (2D-TMO). The angstrom-confinement provides a thickness limitation, forcing sub-unit-cell growth of 2D-TMO with oxygen and metal vacancies. It is showcased that Cr2 O3 , a material without significant catalytic activity for the oxygen evolution reaction (OER) in bulk form, can be activated as a high-performing catalyst if synthesized in the 2D sub-unit-cell form. This method displays the high activity of sub-unit-cell form while retaining the stability of bulk form, promising to yield unexplored fundamental science and applications. It is shown that while retaining the advantages of bottom-up electrochemical synthesis, like simplicity, high yield, and mild conditions, the thickness of TMO can be limited to sub-unit-cell dimensions.
ABSTRACT
The electrochemical CO2 reduction reaction (CO2RR) has attracted intensive attention as a technology to achieve a carbon-neutral society. The use of gas diffusion electrodes (GDEs) enables the realization of high-rate CO2RRs, which is one of the critical requirements for social implementation. Although both a high reaction rate and good selectivity are simultaneously required for electrocatalysts on GDEs, no systematic study of the relationship among active metal centers in electrocatalysts, reaction rate, and selectivity under high-rate CO2RR conditions has been reported. In the present study, we employed various metal-doped covalent triazine frameworks (M-CTFs) as platforms for CO2 reduction reaction (CO2RR) electrocatalysts on GDEs and systematically investigated them to deduce sophisticated design principles using a combined computational and experimental approach. The Ni-CTF showed both high selectivity (faradaic efficiency (FE) > 98% at -0.5 to -0.9 V vs. reversible hydrogen electrode) and a high reaction rate (current density < -200 mA cm-2) for CO production. By contrast, the Sn-CTF exhibited selective formic acid production, and the FE and partial current density reached 85% and 150 mA cm-2, respectively. These results for the CO2RR activity and selectivity at high current density with respect to metal centers correspond well with predictions based on first-principles calculations. This work is the first demonstration of a clear relationship between the computational adsorption energy of intermediates depending on metal species and the experimental high-rate gaseous CO2RR.
ABSTRACT
The electrochemical CO2 reduction reaction (CO2 RR) is a promising strategy for closing the carbon cycle. Increasing the current density ( J) for CO2 RR products is a critical requirement for the social implementation of this technology. Herein, nanoscale tin-oxide-modified copper-oxide foam is hybridized with a carbon-based gas-diffusion electrode (GDE). Using the resultant electrode, the Jformate is increased to -1152 mA cm-2 at -1.2 V versus RHE in 1 m KOH, which is the highest value for CO2 -to-formate electrolysis. The formate faradaic efficiency (FEformate ) reaches ≈99% at -0.6 V versus RHE. The achievement of ultra-high-rate formate production is attributable to the following factors: i) homogeneously-modified Sn atoms suppressing H2 evolution and ii) the hydrophobic carbon nanoparticles on GDEs penetrating the macroporous structure of the foam causing the increase in the thickness of triple-phase interface. Additionally, the FEformate remains at ≈70% under a high J of -1.0 A cm-2 for more than 20 h.
ABSTRACT
Coordination nanosheets are an emerging class of 2D, bottom-up materials having fully π-conjugated, planar, graphite-like structures with high electrical conductivities. Since their discovery, great effort has been devoted to expand the variety of coordination nanosheets; however, in most cases, their low crystallinity in thick films hampers practical device applications. In this study, mixtures of nickel and copper ions are employed to fabricate benzenehexathiolato (BHT)-based coordination nanosheet films, and serendipitously, it is found that this heterometallicity preferentially forms a structural phase with improved film crystallinity. Spectroscopic and scattering measurements provide evidence for a bilayer structure with in-plane periodic arrangement of copper and nickel ions with the NiCu2 BHT formula. Compared with homometallic films, heterometallic films exhibit more crystalline microstructures with larger and more oriented grains, achieving higher electrical conductivities reaching metallic behaviors. Low dependency of Seebeck coefficient on the mixing ratio of nickel and copper ions supports that the large variation in the conductivity data is not caused by change in the intrinsic properties of the films. The findings open new pathways to improve crystallinity and to tune functional properties of 2D coordination nanosheets.
ABSTRACT
Force-responsive ordered carbonaceous frameworks (OCFs) are synthesized for the first time. Carbonization of Ni porphyrin monomers having eight polymerizable ethynyl groups yields OCFs with atomically dispersed divalent Ni species and developed micropores. The highest specific surface area (673 m2 g-1) among the OCFs has been achieved. The OCFs thus synthesized comprise non-stacked graphene sheets, affording a unique mechanical flexibility that enables force-driven reversible phase transition.
ABSTRACT
Prior to the practical application of rechargeable aprotic Li-O2 batteries, the high charging overpotentials of these devices (which inevitably cause irreversible parasitic reactions) must be addressed. The use of redox mediators (RMs) that oxidatively decompose the discharge product, Li2O2, is one promising solution to this problem. However, the mitigating effect of RMs is currently insufficient, and so it would be beneficial to clarify the Li2O2 reductive growth and oxidative decomposition mechanisms. In the present work, Nanoscale secondary ion mass spectrometry (Nano-SIMS) isotopic three-dimensional imaging and differential electrochemical mass spectrometry (DEMS) analyses of individual Li2O2 particles established that both growth and decomposition proceeded at the Li2O2/electrolyte interface in a system containing the Br-/Br3- redox couple as the RM. The results of this study also indicated that the degree of oxidative decomposition of Li2O2 was highly dependent on the cell voltage. These data show that increasing the RM reaction rate at the Li2O2/electrolyte interface is critical to improve the cycle life of Li-O2 batteries.
ABSTRACT
The electroreduction of carbon dioxide is considered a key reaction for the valorization of CO2 emitted in industrial processes or even present in the environment. Cobalt-nitrogen co-doped carbon materials featuring atomically dispersed Co-N sites have been shown to display superior activities and selectivities for the reduction of carbon dioxide to CO, which, in combination with H2 (i.e., as syngas), is regarded as an added-value CO2-reduction product. Such catalysts can be synthesized using heat treatment steps that imply the carbonization of Co-N-containing precursors, but the detailed effects of the synthesis conditions and corresponding materials' composition on their catalytic activities have not been rigorously studied. To this end, in the present work, we synthesized cobalt-nitrogen co-doped carbon materials with different heat treatment temperatures and studied the relation among their surface- and Co-speciation and their CO2-to-CO electroreduction activity. Our results reveal that atomically dispersed cobalt-nitrogen sites are responsible for CO generation while suggesting that this CO-selectivity improves when these atomic Co-N centers are hosted in the carbon layers that cover the Co nanoparticles featured in the catalysts synthesized at higher heat treatment temperatures.
ABSTRACT
Iminodiacetic acid (IDA) is a tridentate ligand, which can capture metal ions by forming two fused five-membered chelate rings. In this study, we fixed IDA moieties onto a two-dimensional nanocarbon, graphene oxide (GO), to obtain materials with high and selective adsorption of metal ions. The synthesis conditions for the GO-IDA composites were optimized, then their structures were characterized by infrared spectroscopy (FT-IR), X-ray photoelectron spectroscopy (XPS), and CHN elemental analysis. In addition, the heavy-metal removal efficiency and selectivity of the GO-IDA composites with different length alkyl linkers between the GO and IDA were investigated. An aqueous solution containing 10 metal ions (Al, As, B, Cd, Cr, Cu, Mn, Pb, Se, and Zn) was used as a model for contaminated water at pH 7, and the interactions of the ions with GO-IDA were in the order of Cu > Pb > As > B > Zn > Al ≈ Se. The interaction between Cu and GO-IDA was confirmed by XPS and extended X-ray absorption fine structure (EXAFS), which showed that Cu was coordinated to IDA.
ABSTRACT
Carbon-rich materials, which contain over 90% carbon, have been mainly synthesized by the carbonization of organic compounds. However, in many cases, their original molecular and ordered structures are decomposed by the carbonization process, which results in a failure to retain their original three-dimensional (3D) ordering at the angstrom level. Recently, we successfully produced carbon-rich materials that are able to retain their 3D ordering at the angstrom level even after the calcination of organic porous pillar[6]arene supramolecular assemblies and cyclic porphyrin dimer assemblies. Other new pathways to prepare carbon-rich materials with 3D ordering at the angstrom level are the controlled polymerization of designed monomers and redox reaction of graph. Electrocatalytic application using these materials is described.
ABSTRACT
Various electrolyte components have been investigated with the aim of improving the cycle life of lithium-oxygen (Li-O2) batteries. A tetraglyme-based electrolyte containing dual anions of Br- and NO3- is a promising electrolyte system in which the cell voltage during charging is reduced because of the redox-mediator function of the Br-/Br3- and NO2-/NO2 couples, while the Li-metal anode is protected by Li2O formed via the reaction between Li metal and NO3-. To maximize the potential of this system, the fundamental factors that limit the cycle life should be clarified. In the present work, we used nondestructive electrochemical impedance spectroscopy to analyze the temporal change of the charge transfer resistances during cycles of Li-O2 batteries with dual anions. The charge transfer resistance at the cathode was revealed to exhibit good correlation with the reduction of the discharge voltage. These results, combined with the results of electrode surface inspections, revealed that irreversible accumulation of insulating deposits such as Li2O2 and Li2CO3 on the cathode surface was a major cause of the short cycle life. Furthermore, the analyses of the time course of the solution resistance suggested that diminished reactivity between the redox mediators and Li2O2 was a critical factor that led to the irreversible accumulation of the less-reactive Li2O2 on the cathode and eventually to a shortened cycle life. These findings indicated that increasing the reactivity between Br3- and Li2O2 is essentially important for improving the cycle stability of Li-O2 batteries and the reactivity can be nondestructively assessed by tracking the dynamic changes in the solution resistance.
ABSTRACT
Enhancement of the discharge capacity of lithium-oxygen batteries (LOBs) while maintaining a high cell voltage is an important challenge to overcome to achieve an ideal energy density. Both the cell voltage and discharge capacity of an LOB could be controlled by employing a binary solvent electrolyte composed of dimethyl sulfoxide (DMSO) and acetonitrile (MeCN), whereby an energy density 3.2 times higher than that of the 100 vol % DMSO electrolyte was obtained with an electrolyte containing 50 vol % of DMSO. The difference in the solvent species that preferentially solvates Li+ and that which controls the adsorption-desorption equilibrium of the discharge reaction intermediate, LiO2, on the cathode/electrolyte interface provides these unique properties of the binary solvent electrolyte. Combined spectroscopic and electrochemical analysis have revealed that the solvated complex of Li+ and the environment of the cathode/electrolyte interface were the determinants of the cell voltage and discharge capacity, respectively.
ABSTRACT
Aqueous electrochemical oxidation of hydrocarbons into valuable compounds, such as alcohols and carbonyl compounds, has attracted much attention because these systems can operate under mild conditions without toxic oxidants or flammable solvents. The key requirements to achieve such oxidation reactions are (1) highly reactive species on an electrocatalyst for the activation of C-H bonds and (2) efficient transportation pathway for water-insoluble hydrocarbons to an electrode surface. We have determined that a gas diffusion electrode (GDE) supporting Ru atom-modified covalent triazine frameworks (Ru-CTF) has an activity for the electrooxidation of gaseous ethylbenzene to acetophenone using an aqueous electrolyte. A high-valency RuâO species was formed in Ru-CTF as an effective active site for O-atom insertion into stable C-H bonds. Furthermore, Ru-CTF showed excellent stability during four consecutive cycles with the replacement of the electrolyte every 12 h, although the reactive RuâO species is generated. As for the transportation pathway for substrates, the amount of acetophenone generated from gaseous ethylbenzene was much larger than that from ethylbenzene dissolved in an electrolyte. This result indicates that the three-dimensional microstructures in the GDE maximize the transportation of gaseous hydrocarbons and the oxidation reaction occurs at the triple-phase boundary, which enables the use of aqueous electrolytes.
ABSTRACT
In the design of solar-energy conversion electrochemical systems, it is important to consider that natural sunlight fluctuates. By taking nitrous acid photoreduction as an example, this study has shown that the reaction pathway, and hence the reaction products, dynamically respond to variations in light intensity. Under irradiation, the photooxidation of methanol (as sacrificial agent) on TiO2 and the reduction of HNO2 on a Cu-modified covalent triazine framework (Cu-CTF) are electrically coupled, which leads to the photoreduction of HNO2 without an external bias. The major product of the reaction changes from N2 O to NH4 + with an increase in the light intensity. The operating potential also shifts negatively (or positively) when the light intensity is increased (or decreased). These results indicate that a change in the reaction pathway is triggered by a change in the operating potential of the Cu-CTF catalyst under varying light intensity. Such a light-intensity-dependent change in the reaction pathway is particularly important in systems that use photoresponsive electrodes and where multiple products can be obtained, such as the solar-driven reduction of carbon dioxide and nitrogen oxides.
ABSTRACT
A liquid/liquid interfacial method is used to synthesize a conjugated porous polymer nanofilm with a large domain size. Copper-catalyzed azide-alkyne cycloaddition between a triangular terminal alkyne and azide monomers at a water/dichloromethane interface generates a 1,2,3-triazole-linked polymer nanofilm featuring a large aspect ratio and robustness against heat and pH.
ABSTRACT
Single-atom electrocatalysts (SACs), which comprise singly isolated metal sites supported on heterogeneous substrates, have attracted considerable recent attention as next-generation electrocatalysts for various key reactions from the viewpoint of the environment and energy. Not only electrocatalytic activity but also selectivity can be precisely tuned via the construction of SACs with a defined coordination structure, such as homogeneous organometallics. Covalent organic frameworks (COFs) are promising supports for single-atom sites with designed coordination environments due to their unique physicochemical properties, which include porous structures, robustness, a wide range of possible designs, and abundant heteroatoms to coordinate single-metal sites. The rigid frameworks of COFs can hold unstable single-metal atoms, such as coordinatively unsaturated sites or easily aggregated Pt-group metals, which exhibit unique electrocatalytic selectivity. This minireview summarizes recent advances in the selective reactions catalysed by SACs, mainly those supported on triazine-based COFs.
ABSTRACT
The intracellular redox and the circadian clock in photosynthetic organisms are two major regulators globally affecting various biological functions. Both of the global control systems have evolved as systems to adapt to regularly or irregularly changing light environments. Here, we report that the two global regulators mutually interact in cyanobacterium Synechococcus elongatus PCC7942, a model photosynthetic organism whose clock molecular mechanism is well known. Electrochemical assay using a transmembrane electron mediator revealed that intracellular redox of S. elongatus PCC7942 cell exhibited circadian rhythms under constant light conditions. The redox rhythm disappeared when transcription/translation of clock genes is defunctionalized, indicating that the transcription/translation controlled by a core KaiABC oscillator generates the circadian redox rhythm. Importantly, the amplitude of the redox rhythm at a constant light condition was large enough to affect the KaiABC oscillator. The findings indicated that the intracellular redox state is actively controlled to change in a 24-h cycle under constant light conditions by the circadian clock system.
Subject(s)
Circadian Rhythm/physiology , Synechococcus/physiology , Circadian Clocks/radiation effects , Circadian Rhythm/radiation effects , Electrochemistry , Intracellular Space/metabolism , Light , Oxidation-Reduction/radiation effects , Protein Biosynthesis/radiation effects , Synechococcus/radiation effects , Time Factors , Transcription, Genetic/radiation effectsABSTRACT
In non-aqueous lithium-oxygen batteries, the one-electron reduction of oxygen and subsequent lithium oxide formation both occur during discharge. This lithium oxide can be converted to insulating lithium peroxide via two different pathways: a second reduction at the cathode surface or disproportionation in solution. The latter process is known to be advantageous with regard to increasing the discharge capacity and is promoted by a high donor number electrolyte because of the stability of lithium oxide in media of this type. Herein, we report that the cathodic oxygen reduction reaction during discharge typically exhibits negative differential resistance. Importantly, the magnitude of negative differential resistance, which varies with the system component, and the position of the cathode potential relative to the negative differential resistance determined the reaction pathway and the discharge capacity. This result implies that the stability of lithium oxide on the cathode also contributes to the determination of the reaction pathway.