ABSTRACT
Graphene oxide (GO) is the one of the most promising family of materials as atomically thin membranes for water-related molecular separation technologies due to its amphipathic nature and layered structure. Here, we show important aspects of GO on water adsorption from molecular dynamics (MD) simulations, in-situ X-ray diffraction (XRD) measurements, and ex-situ nuclear magnetic resonance (NMR) measurements. Although the MD simulations for GO and the reduced GO models revealed that the flexibility of the interlayer spacing could be attributed to the oxygen-functional groups of GO, the ultra-large GO model cannot well explain the observed swelling of GO from XRD experiments. Our MD simulations propose a realistic GO interlayer structure constructed by staggered stacking of flexible GO sheets, which can explain very well the swelling nature upon water adsorption. The transmission electron microscopic (TEM) observation also supports the non-regular staggered stacking structure of GO. Furthermore, we demonstrate the existence of the two distinct types of adsorbed water molecules in the staggered stacking: water bonded with hydrophilic functional groups and "free" mobile water. Finally, we show that the staggered stacking of GO plays a crucial role in H/D isotopic recognition in water adsorption, as well as the high mobility of water molecules.
ABSTRACT
A sustainable society requires high-energy storage devices characterized by lightness, compactness, a long life and superior safety, surpassing current battery and supercapacitor technologies. Single-walled carbon nanotubes (SWCNTs), which typically exhibit great toughness, have emerged as promising candidates for innovative energy storage solutions. Here we produced SWCNT ropes wrapped in thermoplastic polyurethane elastomers, and demonstrated experimentally that a twisted rope composed of these SWCNTs possesses the remarkable ability to reversibly store nanomechanical energy. Notably, the gravimetric energy density of these twisted ropes reaches up to 2.1 MJ kg-1, exceeding the energy storage capacity of mechanical steel springs by over four orders of magnitude and surpassing advanced lithium-ion batteries by a factor of three. In contrast to chemical and electrochemical energy carriers, the nanomechanical energy stored in a twisted SWCNT rope is safe even in hostile environments. This energy does not deplete over time and is accessible at temperatures ranging from -60 to +100 °C.
ABSTRACT
Graphene oxide (GO)-the oxidized form of graphene-is actively studied in various fields, such as energy, electronic devices, separation of water, materials engineering, and medical technologies, owing to its fascinating physicochemical properties. One major drawback of GO is its instability, which leads to the difficulties in product management. A physicochemical understanding of the ever-changing nature of GO can remove the barrier for its growing applications. Here, we evidencde the presence of intrinsic, metastable and transient GO states upon ripening. The three GO states are identified using a [Formula: see text] transition peak of ultraviolet-visible absorption spectra and exhibit inherent magnetic and electrical properties. The presence of three states of GO is supported by the compositional changes of oxygen functional groups detected via X-ray photoelectron spectroscopy and structural information from X-ray diffraction analysis and transmission electron microscopy. Although intrinsic GO having a [Formula: see text] transition at 230.5 ± 0.5 nm is stable only for 5 days at 298 K, the intrinsic state can be stabilized by either storing GO dispersions below 255 K or by adding ammonium peroxydisulfate.
ABSTRACT
Capacitive analogues of semiconductor diodes (CAPodes) present a new avenue for energy-efficient and nature-inspired next-generation computing devices. Here, we disclose the generalized concept for bias-direction-adjustable n- and p-CAPodes based on selective ion sieving. Controllable-unidirectional ion flux is realized by blocking electrolyte ions from entering sub-nanometer pores. The resulting CAPodes exhibit charge-storage characteristics with a high rectification ratio (96.29 %). The enhancement of capacitance is attributed to the high surface area and porosity of an omnisorbing carbon as counter electrode. Furthermore, we demonstrate the use of an integrated device in a logic gate circuit architecture to implement logic operations ('OR', 'AND'). This work demonstrates CAPodes as a generalized concept to achieve p-n and n-p analogue junctions based on selective ion electrosorption, provides a comprehensive understanding and highlights applications of ion-based diodes in ionologic architectures.
ABSTRACT
The controlled production of nanowindows in graphene layers is desirable for the development of ultrathin membranes. Herein, we propose a single-atom catalytic oxidation method for introducing nanowindows into the graphene layers of single-walled carbon nanotubes (SWCNTs). Using liquid-phase adsorption, copper(II) 2,3,9,10,16,17,23,24-octakis(octyloxy)-29H,31H-phthalocyanine (CuPc) was adsorbed on SWCNT bundles at a surface coverage of 0.9. Subsequently, narrow nanowindows with a number density of 0.13 nm-2 were produced by oxidation above 550 K, which is higher than the decomposition temperature of bulk CuPc. In particular, oxidation of the CuPc-adsorbed SWCNTs at 623 K increased the surface area from 280 to 1690 m2 g-1 owing to the efficient production of nanowindows. The nanowindow size was estimated to be similar to the molecular size of N2 based on the pronounced low-pressure adsorption hysteresis in the N2 adsorption isotherm. In addition, the enthalpy change for the nanowindow-formation equilibrium decreased by 4 kJ mol-1 when CuPc was present, further evidencing the catalytic effect of the Cu atoms supplied by the adsorbed CuPc molecules.
ABSTRACT
Standard clinical care of neonates and the ventilation status of human patients affected with coronavirus disease involves continuous CO2 monitoring. However, existing noninvasive methods are inadequate owing to the rigidity of hard-wired devices, insubstantial gas permeability and high operating temperature. Here, we report a cost-effective transcutaneous CO2 sensing device comprising elastomeric sponges impregnated with oxidized single-walled carbon nanotubes (oxSWCNTs)-based composites. The proposed device features a highly selective CO2 sensing response (detection limit 155 ± 15 ppb), excellent permeability and reliability under a large deformation. A follow-up prospective study not only offers measurement equivalency to existing clinical standards of CO2 monitoring but also provides important additional features. This new modality allowed for skin-to-skin care in neonates and room-temperature CO2 monitoring as compared with clinical standard monitoring system operating at high temperature to substantially enhance the quality for futuristic applications.
ABSTRACT
Nanoscale pores in graphene oxide (GO) control various important functions. The nanoporosity of GO is sensitive to low-temperature heating. Therefore, it is important to carefully process GO and GO-based materials to achieve superior functions. Optimum pretreatment conditions, such as the pre-evacuation temperature and time, are important during gas adsorption in GO to obtain accurate pore structure information. This study demonstrated that the pre-evacuation temperature and time for gas adsorption in GO must be approximately 333-353 K and 4 h, respectively, to avoid the irreversible alteration of nanoporosity. In situ temperature-dependent Fourier-transform infrared spectra and thermogravimetric analysis-mass spectrometry suggested significant structural changes in GO above the pre-evacuation temperature (353 K) through the desorption of "physically adsorbed water" and decomposition of unstable surface functional groups. The nanoporosity of GO significantly changed above the aforementioned pre-evacuation temperature and time. Thus, standard pretreatment is indispensable for understanding the intrinsic interface properties of GO.
Subject(s)
Heart Neoplasms , Hemangioma , Leiomyomatosis , Uterine Neoplasms , Vascular Neoplasms , Humans , Female , Leiomyomatosis/diagnostic imaging , Vena Cava, Inferior/diagnostic imaging , Echocardiography , Vascular Neoplasms/diagnostic imaging , Heart Neoplasms/diagnostic imaging , Heart Atria/diagnostic imagingABSTRACT
The efficient separation of hydrogen from methane and light hydrocarbons for clean energy applications remains a technical challenge in membrane science. To address this issue, we prepared a graphene-wrapped MFI (G-MFI) molecular-sieving membrane for the ultrafast separation of hydrogen from methane at a permeability reaching 5.8 × 106 barrers at a single gas selectivity of 245 and a mixed gas selectivity of 50. Our results set an upper bound for hydrogen separation. Efficient molecular sieving comes from the subnanoscale interfacial space between graphene and zeolite crystal faces according to molecular dynamic simulations. The hierarchical pore structure of the G-MFI membrane enabled rapid permeability, indicating a promising route for the ultrafast separation of hydrogen/methane and carbon dioxide/methane in view of energy-efficient industrial gas separation.
ABSTRACT
Detonation nanodiamond aggregates contain water that is removed by thermal treatments in vacuo, leaving available pores for the adsorption of target molecules. A hard hydrogel of detonation nanodiamonds was thermally treated at 423 K for 2 h, 10 h, and 52 h in vacuo to determine the intensive water adsorption sites and clarify the hygroscopic nature of nanodiamonds. Nanodiamond aggregates heated for long periods in vacuo agglomerate due to the removal of structural water molecules through the shrinkage and/or collapse of the pores. The agglomerated nanodiamond structure that results from long heating periods decreases the nitrogen adsorption but increases the water adsorption by 40%. Nanodiamonds heated for long times possess ultramicropores <0.4 nm in diameter in which only water molecules can be adsorbed, and the characteristic mouth-shaped mesopores adsorb 60% more water than nitrogen. The pore mouth controls the adsorption in the mesopores. Long-term dehydration partially distorts the pore mouth, decreasing the nitrogen adsorption. Furthermore, the nitrogen adsorbed at the pore mouth suppresses additional nitrogen adsorption. Consequently, the mesopores are not fully accessible to nitrogen molecules because the pore entrances are blocked by polar groups. Thus, mildly oxidized detonation nanodiamond particles can show a unique molecular sieving behavior.
ABSTRACT
Isotopes of heavier gases including carbon (13C/14C), nitrogen (13N), and oxygen (18O) are highly important because they can be substituted for naturally occurring atoms without significantly perturbing the biochemical properties of the radiolabelled parent molecules. These labelled molecules are employed in clinical radiopharmaceuticals, in studies of brain disease and as imaging probes for advanced medical imaging techniques such as positron-emission tomography (PET). Established distillation-based isotope gas separation methods have a separation factor (S) below 1.05 and incur very high operating costs due to high energy consumption and long processing times, highlighting the need for new separation technologies. Here, we show a rapid and highly selective adsorption-based separation of 18O2 from 16O2 with S above 60 using nanoporous adsorbents operating near the boiling point of methane (112 K), which is accessible through cryogenic liquefied-natural-gas technology. A collective-nuclear-quantum effect difference between the ordered 18O2 and 16O2 molecular assemblies confined in subnanometer pores can explain the observed equilibrium separation and is applicable to other isotopic gases.
ABSTRACT
Customized micro- and mesoporous carbons are in high demand for ecofriendly technologies. Reactivation of the well-characterized pitch-based activated carbon fiber (ACF) can provide a clear understanding of the structural mechanism of steam activation, which would be helpful for designing better micro- and mesoporous carbons. ACFs were reactivated with steam at 973-1173 K. X-ray diffraction and Raman spectroscopy indicated that the stacking number of graphene-like layers of the pore wall decreased with an increase in the reactivation temperature. The average fiber diameter of the ACFs, which was measured via scanning electron microscopy, decreased with the increase in the reactivation temperature. The relationship between the decrease in the fiber diameter and the burn-off suggested that reactivation above 1023 K produced micropores inside the fiber. A deconvolution analysis of the pore-size distribution revealed the variation of the distribution. The peak difference was approximately 0.3 nm, depending on the reactivation temperature. These results indicate that reactivation with steam proceeds via the preferential one-by-one gasification of less-crystalline graphene-like units.
ABSTRACT
A new asymmetric capacitor concept is proposed providing high energy storage capacity for only one charging direction. Size-selective microporous carbons (w<0.9â nm) with narrow pore size distribution are demonstrated to exclusively electrosorb small anions (BF4 - ) but size-exclude larger cations (TBA+ or TPA+ ), while the counter electrode, an ordered mesoporous carbon (w>2â nm), gives access to both ions. This architecture exclusively charges in one direction with high rectification ratios (RR=12), representing a novel capacitive analogue of semiconductor-based diodes ("CAPode"). By precise pore size control of microporous carbons (0.6â nm, 0.8â nm and 1.0â nm) combined with an ordered mesoporous counter electrode (CMK-3, 4.8â nm) electrolyte cation sieving and unidirectional charging is demonstrated by analyzing the device charge-discharge response and monitoring individual electrodes of the device via inâ situ NMR spectroscopy.
ABSTRACT
Nanodiamond aggregates have interparticle pores of 4.5â¯nm on average, exhibiting porous nature involved in their water storage. This work studies the hygroscopic nature of porous nanodiamond aggregates by water absorption based on liquid water droplets. Nanodiamond aggregates show hydrophobicity from the water vapor adsorption. Surprisingly, porous nanodiamond aggregates quickly absorb water droplets at the bulk scale. The volume of absorbed liquid water is comparable to that of the water-absorbing clay Montmorillonite and higher than those of zeolites ZSM-5 and molecular sieve 5A. This hygroscopic nature of nanodiamonds is ascribed to the micro- and mesoporous structure of their aggregates and the special core-shell structure of each nanodiamond particle (wrapped by graphene-like carbon). The absorption rate of liquid water in the porous nanodiamonds is influenced by the surface wettability, while the hygroscopic capacity depends mainly on the hierarchical porosity.
ABSTRACT
Despite extensive research over the last several decades, the microscopic characterization of topological phases of adsorbed phenol from aqueous solutions in carbon micropores (pore size < 2.0 nm), which are believed to exhibit a solid and quasi-solid character, has not been reported. Here, we present a combined experimental and molecular level study of phenol adsorption from neutral water solutions in graphitic carbon micropores. Theoretical and experimental results show high adsorption of phenol and negligible coadsorption of water in hydrophobic graphitic micropores (super-sieving effect). Graphic processing unit-accelerated molecular dynamics simulation of phenol adsorption from water solutions in a realistic model of carbon micropores reveal the formation of two-dimensional phenol crystals with a peculiar pattern of hydrophilic-hydrophobic stripes in 0.8 nm supermicropores. In wider micropores, disordered phenol assemblies with water clusters, linear chains, and cavities of various sizes are found. The highest surface density of phenol is computed in 1.8 nm supermicropores. The percolating water cluster spanning the entire pore space is found in 2.0 nm supermicropores. Our findings open the door for the design of better materials for purification of aqueous solutions from nonelectrolyte micropollution.
ABSTRACT
The size control of nanowindows on the graphene walls is indispensable to develop innovative adsorption and separation technologies. As single wall carbon nanohorn (SWCNH) consists of graphene wall, the permeation of ions through the nanowindows can be evaluated with adsorption measurement. We regulated the nanowindow size by use of mild oxidation at 473-523â¯K for 20-70â¯h. The explicit low pressure adsorption hysteresis was observed in the N2 adsorption isotherms of thus-oxidized SWCNHs, suggesting the window size of 0.3-0.4â¯nm. Moreover, the aqueous phase adsorption measurement for Li+, Na+, K+, Rb+, and Cs+ indicates that the nanowindow size is smaller than about 0.37â¯nm, being close to the estimated size from N2 adsorption.
ABSTRACT
Nanoscale windows in graphene (nanowindows) have the ability to switch between open and closed states, allowing them to become selective, fast, and energy-efficient membranes for molecular separations. These special pores, or nanowindows, are not electrically neutral due to passivation of the carbon edges under ambient conditions, becoming flexible atomic frameworks with functional groups along their rims. Through computer simulations of oxygen, nitrogen, and argon permeation, here we reveal the remarkable nanowindow behavior at the atomic scale: flexible nanowindows have a thousand times higher permeability than conventional membranes and at least twice their selectivity for oxygen/nitrogen separation. Also, weakly interacting functional groups open or close the nanowindow with their thermal vibrations to selectively control permeation. This selective fast permeation of oxygen, nitrogen, and argon in very restricted nanowindows suggests alternatives for future air separation membranes.
ABSTRACT
Fabrication of nanographene shows a promising route for production of designed porous carbons, which is indispensable for highly efficient molecular separation and energy storage applications. This process requires a better understanding of the mechanical properties of nanographene in their aggregated structure. We studied the structural and mechanical properties of nanographene monoliths compressed at 43 MPa over different times from 3 to 25 h. While in monoliths compressed over shorter time adsorption isotherms of Ar at 87 K or N2 at 77 K exhibited a prominent hysteresis due to presence of predominant mesopores, compression for long time induces a low pressure hysteresis. On the other hand, compression for 25 h increases the microporosity evaluated by Ar adsorption, not by N2 adsorption, indicating that 25 h compression rearranges the nanographene stacking structure to produce ultramicropores that can be accessible only for Ar. TEM, X-ray diffraction, and Raman spectroscopic studies indicated that the compression for 25 h unfolds double-bent-like structures, relaxing the unstable nanographene stacked structure formed on the initial compression without nanographene sheets collapse. This behavior stems from the highly elastic nature of the nanographenes.
ABSTRACT
Ionic liquids are composed of equal quantities of positive and negative ions. In the bulk, electrical neutrality occurs in these liquids due to Coulombic ordering, in which ion shells of alternating charge form around a central ion. Their structure under confinement is far less well understood. This hinders the widespread application of ionic liquids in technological applications. Here we use scattering experiments to resolve the structure of a widely used ionic liquid (EMI-TFSI) when it is confined inside nanoporous carbons. We show that Coulombic ordering reduces when the pores can accommodate only a single layer of ions. Instead, equally charged ion pairs are formed due to the induction of an electric potential of opposite sign in the carbon pore walls. This non-Coulombic ordering is further enhanced in the presence of an applied external electric potential. This finding opens the door for the design of better materials for electrochemical applications.