Noninvasive imaging-guided ultrasonic neurostimulation with arbitrary 2D patterns and its application for high-quality vision restoration.

Retinal degeneration, a leading cause of irreversible low vision and blindness globally, can be partially addressed by retina prostheses which stimulate remaining neurons in the retina. However, existing electrode-based treatments are invasive, posing substantial risks to patients and healthcare providers. Here, we introduce a completely noninvasive ultrasonic retina prosthesis, featuring a customized ultrasound two-dimensional array which allows for simultaneous imaging and stimulation. With synchronous three-dimensional imaging guidance and auto-alignment technology, ultrasonic retina prosthesis can generate programmed ultrasound waves to dynamically and precisely form arbitrary wave patterns on the retina. Neuron responses in the brain's visual center mirrored these patterns, evidencing successful artificial vision creation, which was further corroborated in behavior experiments. Quantitative analysis of the spatial-temporal resolution and field of view demonstrated advanced performance of ultrasonic retina prosthesis and elucidated the biophysical mechanism of retinal stimulation. As a noninvasive blindness prosthesis, ultrasonic retina prosthesis could lead to a more effective, widely acceptable treatment for blind patients. Its real-time imaging-guided stimulation strategy with a single ultrasound array, could also benefit ultrasound neurostimulation in other diseases.

Growing recyclable and healable piezoelectric composites in 3D printed bioinspired structure for protective wearable sensor.

Bionic multifunctional structural materials that are lightweight, strong, and perceptible have shown great promise in sports, medicine, and aerospace applications. However, smart monitoring devices with integrated mechanical protection and piezoelectric induction are limited. Herein, we report a strategy to grow the recyclable and healable piezoelectric Rochelle salt crystals in 3D-printed cuttlebone-inspired structures to form a new composite for reinforcement smart monitoring devices. In addition to its remarkable mechanical and piezoelectric performance, the growth mechanisms, the recyclability, the sensitivity, and repairability of the 3D-printed Rochelle salt cuttlebone composite were studied. Furthermore, the versatility of composite has been explored and applied as smart sensor armor for football players and fall alarm knee pads, focusing on incorporated mechanical reinforcement and electrical self-sensing capabilities with data collection of the magnitude and distribution of impact forces, which offers new ideas for the design of next-generation smart monitoring electronics in sports, military, aerospace, and biomedical engineering.

2-D Array Design and Fabrication With Pitch-Shifting Interposer at Frequencies From 4 MHz up to 10 MHz.

High element density and strict constraints of the element's size have significantly limited the design and fabrication of 2-D ultrasonic arrays, especially fully sampled 2-D arrays. Recently, 3-D printing technology has been one of the most rapidly developing fields. Along with the great progress of 3-D printing technology, complex and detailed 3-D structures have become readily available with a short iteration cycle, which allows us to reduce the complexity of routing and helps to ameliorate assembly problems in 2-D ultrasound array fabrication. In this work, we designed and fabricated 2-D ultrasound arrays for an array of applications with a pitch-shifting interposer, which allowed us to fit different array designs with the same circuit design and significantly reduce the requirements in routing and connection for 2-D array fabrication at frequencies from 4 to 10 MHz. Results demonstrated that this design would make 2-D arrays more available and affordable.

Design and Simulation of a Ring Transducer Array for Ultrasound Retinal Stimulation.

Argus II retinal prosthesis is the US Food and Drug Administration (FDA) approved medical device intended to restore sight to a patient's blind secondary to retinal degeneration (i.e., retinitis pigmentosa). However, Argus II and most reported retinal prostheses require invasive surgery to implant electrodes in the eye. Recent studies have shown that focused ultrasound can be developed into a non-invasive retinal prosthesis technology. Ultrasound energy focused on retinal neurons can trigger the activities of retinal neurons with high spatial-temporal resolution. This paper introduces a novel design and simulation of a ring array transducer that could be used as non-invasive ultrasonic retinal stimulation. The array transducer is designed in the shape of a racing ring with a hemisphere surface that mimics a contact lens to acoustically couple with the eye via the tear film and directs the ultrasound to avoid the high acoustic absorption from the crystalline lens. We will describe the design methods and simulation of the two-dimensional pattern stimulation. Finally, compared with other existing retinal prostheses, we show that the ultrasound ring array is practical and safe and could be potentially used as a non-invasive retinal prosthesis.

Highly Integrated Multiplexing and Buffering Electronics for Large Aperture Ultrasonic Arrays.

Large aperture ultrasonic arrays can be implemented by tiling together multiple pretested modules of high-density acoustic arrays with closely integrated multiplexing and buffering electronics to form a larger aperture with high yield. These modular arrays can be used to implement large 1.75D array apertures capable of focusing in elevation for uniform slice thickness along the axial direction which can improve image contrast. An important goal for large array tiling is obtaining high yield and sensitivity while reducing extraneous image artifacts. We have been developing tileable acoustic-electric modules for the implementation of large array apertures utilizing Application Specific Integrated Circuits (ASICs) implemented using 0.35 µ m high voltage (50 V) CMOS. Multiple generations of ASICs have been designed and tested. The ASICs were integrated with high-density transducer arrays for acoustic testing and imaging. The modules were further interfaced to a Verasonics Vantage imaging system and were used to image industry standard ultrasound phantoms. The first-generation modules comprise ASICs with both multiplexing and buffering electronics on-chip and have demonstrated a switching artifact which was visible in the images. A second-generation ASIC design incorporates low switching injection circuits which effectively mitigate the artifacts observed with the first-generation devices. Here, we present the architecture of the two ASIC designs and module types as well imaging results that demonstrate reduction in switching artifacts for the second-generation devices.

Flexible ultrasound-induced retinal stimulating piezo-arrays for biomimetic visual prostheses.

Electronic visual prostheses, or biomimetic eyes, have shown the feasibility of restoring functional vision in the blind through electrical pulses to initiate neural responses artificially. However, existing visual prostheses predominantly use wired connections or electromagnetic waves for powering and data telemetry, which raises safety concerns or couples inefficiently to miniaturized implant units. Here, we present a flexible ultrasound-induced retinal stimulating piezo-array that can offer an alternative wireless artificial retinal prosthesis approach for evoking visual percepts in blind individuals. The device integrates a two-dimensional piezo-array with 32-pixel stimulating electrodes in a flexible printed circuit board. Each piezo-element can be ultrasonically and individually activated, thus, spatially reconfigurable electronic patterns can be dynamically applied via programmable ultrasound beamlines. As a proof of concept, we demonstrate the ultrasound-induced pattern reconstruction in ex vivo murine retinal tissue, showing the potential of this approach to restore functional, life-enhancing vision in people living with blindness.

Manipulation and Mechanical Deformation of Leukemia Cells by High-Frequency Ultrasound Single Beam.

Ultrasound single-beam acoustic tweezer system has attracted increasing attention in the field of biomechanics. Cell biomechanics play a pivotal role in leukemia cell functions. To better understand and compare the cell mechanics of the leukemia cells, herein, we fabricated an acoustic tweezer system in-house connected with a 50-MHz high-frequency cylinder ultrasound transducer. Selected leukemia cells (Jurkat, K562, and MV-411 cells) were cultured, trapped, and manipulated by high-frequency ultrasound single beam, which was transmitted from the ultrasound transducer without contacting any cells. The relative deformability of each leukemia cell was measured, characterized, and compared, and the leukemia cell (Jurkat cell) gaining the highest deformability was highlighted. Our results demonstrate that the high-frequency ultrasound single beam can be utilized to manipulate and characterize leukemia cells, which can be applied to study potential mechanisms in the immune system and cell biomechanics in other cell types.

Design and Fabrication of 15-MHz Ultrasonic Transducers Based on a Textured Pb(Mg1/3Nb2/3)O3-Pb(Zr, Ti)O3 Ceramic.

Ultrasound medical imaging is an entrenched and powerful tool for medical diagnosis. Image quality in ultrasound is mainly dependent on performance of piezoelectric transducer elements, which is further related to the electromechanical performance of the constituent piezoelectric materials. With rising need for piezoelectric materials with better performance and low cost, a highly 〈001〉 textured piezo ceramic, Pb(Mg1/3Nb2/3)O3-Pb(Zr, Ti)O3, has been developed. Recently, textured ceramic materials can be produced at low cost and exhibit high piezoelectric strain constants and large electromechanical coupling coefficients. In this work, 15-MHz ultrasonic transducers with an effective aperture of 2.5 mm in diameter based on these highly 〈001〉 textured ceramics have been successfully fabricated. The fabricated transducers achieved a central frequency of 15 MHz, a fractional bandwidth of 67% (at -6 dB), a high effective electromechanical coupling coefficient [Formula: see text] of 0.55, and a low insertion loss (IL) of 21 dB. Ex vivo ultrasonic imaging of a porcine eyeball was used to assess the tomography quality of the transducer. The results show that utilized textured ceramic has a great potential in developing ultrasonic devices for biomedical imaging purposes.

Erratum to "Highly Integrated Multiplexing and Buffering Electronics for Large Aperture Ultrasonic Arrays".

[This corrects the article DOI: 10.34133/2022/9870386.].

Ultrasonic elastography to assess biomechanical properties of the optic nerve head and peripapillary sclera of the eye.

PURPOSE: To quantitatively investigate both optic nerve head (ONH) and peripapillary sclera (PPS) biomechanical properties of porcine eyes through an ultrasonic elastography imaging system in response to both increasing and decreasing intraocular pressure (IOP). METHODS: The Young's modulus of the ONH and PPS were assessed using our high resolution ultrasonic imaging system which utilized a mechanical shaker to induce shear waves and an off-axis aligned 40 MHz needle transducer to track micron-level displacement along the direction of wave propagation. In this study, imaging on a total of 8 ex vivo porcine eyes preloaded with IOPs from 6 mmHg to 30 mmHg was performed. To have a better understanding of the effect of varying IOP on biomechanics, both increasing and decreasing IOPs were investigated. RESULTS: The increase of the Young's modulus of ONH (92.4 ± 13.9 kPa at 6 mmHg to 224.7 ± 71.1 kPa at 30 mmHg) and PPS (176.8 ± 14.3 kPa at 6 mmHg to 573.5 ± 64.4 kPa at 30 mmHg) following IOP elevation could be observed in the reconstructed Young's modulus of the shear wave elasticity (SWE) imaging while the B-mode structural images remained almost unchanged. In addition, for the same IOP level, both ONH and PPS have a tendency to be stiffer with decreasing IOP as compared to increasing IOP. CONCLUSIONS: Our results demonstrate the feasibility of using our ultrasonic elastography system to investigate the stiffness mapping of posterior eye with high resolution in both increasing and decreasing IOPs, making this technique potentially useful for glaucoma.

2-D Ultrasonic Array-Based Optical Coherence Elastography.

Acoustic radiation force optical coherence elastography (ARF-OCE) has been successfully implemented to characterize the biomechanical properties of soft tissues, such as the cornea and the retina, with high resolution using single-element ultrasonic transducers for ARF excitation. Most currently proposed OCE techniques, such as air puff and ARF, have less capability to control the spatiotemporal information of the induced region of deformation, resulting in limited accuracy and low temporal resolution of the shear wave elasticity imaging. In this study, we propose a new method called 2-D ultrasonic array-based OCE imaging, which combines the advantages of 3-D dynamic electronic steering of the 2-D ultrasonic array and high-resolution optical coherence tomography (OCT). The 3-D steering capability of the 2-D array was first validated using a hydrophone. Then, the combined 2-D ultrasonic array OCE system was calibrated using a homogenous phantom, followed by an experiment on ex vivo rabbit corneal tissue. The results demonstrate that our newly developed 2-D ultrasonic array-based OCE system has the capability to map tissue biomechanical properties accurately, and therefore, has the potential to be a vital diagnostic tool in ophthalmology.

Current Ultrasound Technologies and Instrumentation in the Assessment and Monitoring of COVID-19 Positive Patients.

Since the emergence of the COVID-19 pandemic in December of 2019, clinicians and scientists all over the world have faced overwhelming new challenges that not only threaten their own communities and countries but also the world at large. These challenges have been enormous and debilitating, as the infrastructure of many countries, including developing ones, had little or no resources to deal with the crisis. Even in developed countries, such as Italy, health systems have been so inundated by cases that health care facilities became oversaturated and could not accommodate the unexpected influx of patients to be tested. Initially, resources were focused on testing to identify those who were infected. When it became clear that the virus mainly attacks the lungs by causing parenchymal changes in the form of multifocal pneumonia of different levels of severity, imaging became paramount in the assessment of disease severity, progression, and even response to treatment. As a result, there was a need to establish protocols for imaging of the lungs in these patients. In North America, the focus was on chest X-ray and computed tomography (CT) as these are widely available and accessible at most health facilities. However, in Europe and China, this was not the case, and a cost-effective and relatively fast imaging modality was needed to scan a large number of sick patients promptly. Hence, ultrasound (US) found its way into the hands of Chinese and European physicians and has since become an important imaging modality in those locations. US is a highly versatile, portable, and inexpensive imaging modality that has application across a broad spectrum of conditions and, in this way, is ideally suited to assess the lungs of COVID-19 patients in the intensive care unit (ICU). This bedside test can be done with little to no movement of the patients from the unit that keeps them in their isolated rooms, thereby limiting further exposure to other health personnel. This article presents a basic introduction to COVID-19 and the use of the US for lung imaging. It further provides a high-level overview of the existing US technologies that are driving development in current and potential future US imaging systems for lung, with a specific emphasis on portable and 3-D systems.

Stretchable Nanolayered Thermoelectric Energy Harvester on Complex and Dynamic Surfaces.

Thermoelectric generators (TEGs) provide a unique solution for energy harvesting from waste heat, presenting a potential solution for green energy. However, traditional rigid and flexible TEGs cannot work on complex and dynamic surfaces. Here, we report a stretchable TEG (S-TEG) (over 50% stretchability of the entire device) that is geometrically suitable for various complex and dynamic surfaces of heat sources. The S-TEG consists of hot-pressed nanolayered p-(Sb2Te3) and n-(Bi2Te3)-type thermoelectric couple arrays and exploits the wavy serpentine interconnects to integrate all units. The internal resistance of a 10 × 10 array is 22 ohm, and the output power is ∼0.15 mW/cm2 at ΔT = 19 K on both developable and nondevelopable surfaces, which are much improved compared with those of existing S-TEGs. The energy harvesting of S-TEG from the dynamic surfaces of the human skin offers a potential energy solution for the wearable devices for health monitoring.

In Vivo Visualization of Eye Vasculature Using Super-Resolution Ultrasound Microvessel Imaging.

OBJECTIVE: The choroidal vessels, which supply oxygen and nutrient to the retina, may play a pivotal role in eye disease pathogenesis such as diabetic retinopathy and glaucoma. In addition, the retrobulbar circulation that feeds the choroid shows an important pathophysiologic role in myopia and degenerative myopia. Owing to the light-absorbing retinal pigment epithelium (RPE) and optically opaque sclera, choroidal and retrobulbar vasculature were difficult to be observed using clinically accepted optical coherence tomography angiography (OCT-A) technique. Here, we have developed super-resolution ultrasound microvessel imaging technique to visualize the deep ocular vasculature. METHODS: An 18-MHz linear array transducer with compounding plane wave imaging technique and contrast agent - microbubble was implemented in this study. The centroid intensity of each microbubble was detected using image deconvolution algorithm with spatially variant point spread function, and then accumulated in successive frames in order to reconstruct microvasculature. The image deconvolution technique was first evaluated in a simulation study and experimental flow phantoms. The performance was then validated on normal rabbit eyes in vivo. RESULTS: The image deconvolution based super-resolution ultrasound microvessel imaging technique shows good performance on either simulation study or flow phantoms. In vivo rabbit eye study indicated that the micron-level choroidal and retrobulbar vessels around the optic nerve head were successfully reconstructed in multiple 2D views and 3D volume imaging. CONCLUSIONS: Our results demonstrate the capability of using super-resolution ultrasound microvessel imaging technique to image the microvasculature of the posterior pole of the eye. This efficient approach can potentially lead to a routinely performed diagnostic procedure in the field of ophthalmology.

Co-Integrated PIN-PMN-PT 2-D Array and Transceiver Electronics by Direct Assembly Using a 3-D Printed Interposer Grid Frame.

Tiled modular 2-D ultrasound arrays have the potential for realizing large apertures for novel diagnostic applications. This work presents an architecture for fabrication of tileable 2-D array modules implemented using 1-3 composites of high-bandwidth (BW) PIN-PMN-PT single-crystal piezoelectric material closely coupled with high-voltage CMOS application-specific integrated circuit (ASIC) electronics for buffering and multiplexing functions. The module, which is designed to be operated as a λ -pitch 1.75-D array, benefits from an improved electromechanical coupling coefficient and increased Curie temperature and is assembled directly on top of the ASIC silicon substrate using an interposer backing. The interposer consists of a novel 3-D printed acrylic frame that is filled with conducting and acoustically absorbing silver epoxy material. The ASIC comprises a high-voltage switching matrix with locally integrated buffering and is interfaced to a Verasonics Vantage 128, using a local field programmable gate array (FPGA) controller. Multiple prototype 5 ×6 element array modules have been fabricated by this process. The combined acoustic array and ASIC module was configured electronically by programming the switches to operate as a 1-D array with elements grouped in elevation for imaging and pulse-echo testing. The resulting array configuration had an average center frequency of 4.55 MHz, azimuthal element pitch of [Formula: see text], and exhibited average -20-dB pulsewidth of 592 ns and average -6-dB fractional BW of 77%.

[The protective mechanism study of fengshiqing recipe against bone destruction in CIA rats].

OBJECTIVE: To explore the protective mechanism of Fengshiqing Recipe (FR) against bone destruction in collagen-induced arthritis (CIA) rats. METHODS: Rats were divided into four groups in the experiment,i.e., the blank control group, the model group, the MTX group (MTX, 1 mg/1 000 g), and the FR group (24 g crude FR/kg). The CIA model was prepared except the blank control group. Medication was started in the MTX group and the FR group from the 14th day after modeling to the 56th day. The toe volume was measured on every Tuesday and Friday. Expression levels of serum IL-17, RANKL, MIP-1alpha were detected after 3-and 6-week intervention. The bone scintigraphy with nuclide (SPECT), bone mineral density (BMD), and the pathological section were observed to assess the intervention of drugs of heat clearing blood activating actions in the bone destruction of CIA rats. RESULTS: From the 10th day of modeling, the volume of both toes started to swell and reached the peak at about 21 days. It was obviously shrunk at about 30 days. Of them, the swelling degree was milder in the MTX group and the FR group than in the model group. Compared with the model group at the same phase, the levels of IL-17 and RANKL decreased in the MTX group after 3 weeks of intervention (P < 0.01, P < 0.05). The IL-17 level decreased in the FR group after three weeks of intervention (P < 0.05). The RANKL level decreased in the MTX group and the FR group after 6 weeks of intervention (P < 0.01, P < 0.05). Compared with the model group and the MTX group, the overall BMD and ankle BMD increased in the FR group after 6 weeks of intervention (P < 0.01, P < 0.05). The ankle ROI/mandible and the toe ROI/mandible were elevated in the FR group after 3 weeks of intervention (P < 0.05). Pathological results suggested that the joint lacunae was significantly widened, the hyperplasia of the synovial tissue was so severe, and the bone tissue was destroyed in the model group. Compared with the model group, the aforesaid conditions were significantly improved in the MTX group and the FR group. The cartilage structure was complete. CONCLUSION: QR could inhibit decreased BMD, prevent bone destruction, which might be achieved by down-regulating expression levels of IL-17, RANKL, and MIP-1alpha through the osteo immunological Th/RANKL system,inhibiting maturation and differentiation of osteoclasts, thereby, inhibiting bone destruction.