ABSTRACT
The invention of Light Emitting Diode (LED) revolutionized energy-efficient illumination, but concerns persist regarding the potential harm of blue light to our eyes. In this study, we scrutinized the impact of LED light characteristics on eyes using two cell types: M-1 (rich in mitochondria) and CD-1 (neuronal). Variations in color rendering index (CRI) and correlated color temperature (CCT) were investigated, alongside exposure durations ranging from 0 to 24 hours. The findings illuminated the potential benefits of high-quality LED lighting, characterized by a high CRI and low CCT, which emits a greater proportion of red light. This form of lighting was associated with enhanced cell proliferation, elevated ATP levels, and reduced oxidative stress. In contrast, LEDs with low CRI and high CCT exhibited adverse effects, diminishing cell viability and increasing oxidative stress. These results suggest that high-quality LED lighting may have neuroprotective potential as a treatment option, such as for retinal ganglion cells.
Subject(s)
Cell Survival , Light , Mitochondria , Neurons , Oxidative Stress , Animals , Mice , Mitochondria/metabolism , Mitochondria/radiation effects , Cell Survival/radiation effects , Neurons/metabolism , Neurons/radiation effects , Oxidative Stress/radiation effects , Cerebral Cortex/radiation effects , Cerebral Cortex/metabolism , Cerebral Cortex/cytology , Cell Line , Cell Proliferation/radiation effects , Adenosine Triphosphate/metabolism , LightingABSTRACT
Fluorescent microbeads (MBs) are widely used as next-generation biosensors for the detection of target chemicals at highly sensitive concentrations, and for imaging and tracking in vitro and in vivo. However, most known methods for producing fluorescent MBs require complicated multistep processes that result in low production rates. In this study, we report a method for fabricating micrometer-sized quantum dot microbeads (QD-MBs) using a microfluidic chip and specially designed QD photoresist (QD-PR). This on-demand lab-on-a-chip method yielded monodispersed QD-MBs ranging from 1.89 to 33 µm with a coefficient of variation of less than 10%. The size distribution of the fabricated QD-MBs was Gaussian with a peak around the mean diameter and a spread of sizes around the peak. Compared with nanoscale QDs, the fabricated QD-MBs showed no emission loss. The full-width at half-maximum of the emission peak of the QD-MBs was smaller than that of the colloidal QDs, indicating a more uniform distribution and a higher density of QDs within the MB structure. In addition, we investigated the microfluidic flow regime that yielded the most uniform and controllable QD-MB. The MBs in the dripping regime were spherical and monodisperse, with an excellent particle size distribution. In this study, we present a simple and effective strategy for producing QD-MBs with controllable sizes, which can be crucial in diverse fields such as biosensing, drug delivery, and imaging.
ABSTRACT
To investigate the excited-state properties of metal-organic bichromophores, including energy transfer mechanisms, a series of new homoleptic N-heterocyclic carbene (NHC)-based iridium(III) complexes were prepared by incorporating a peripheral naphthalene (Np) (Ir(Nppmi)3: fac-/mer-Ir(1-Nppmi)3 and fac-/mer-Ir(2-Nppmi)3) or carbazole (Cz) (Ir(Czpmi)3: fac-/mer-Ir(o-Czpmi)3, fac-/mer-Ir(m-Czpmi)3, and fac-/mer-Ir(p-Czpmi)3) unit to the phenyl moiety of the phenylimidazole (pmi) ligand. Through a series of photophysical analyses and femtosecond time-resolved absorption (fs-TA) spectroscopy, it was discovered that the phosphorescence of the Ir core, (Ir(pmi)3), was considerably quenched, while intense phosphorescence peaks arising from the excited triplet Np (3Np*)/Cz (3Cz*) species were primarily observed at room temperature (r.t.) and low temperature. Such amplified phosphorescence of the tethered organic Np and Cz units originated from triplet-triplet energy transfer (TTET) from the high-lying metal-to-ligand charge transfer (3MLCT) state of the Ir(pmi)3 core to the ligand-centered triplet state (3LC) of the peripheral Np and Cz units. This result indicates that the exothermic intramolecular energy transfer (IET) in the excited triplet state realizes the efficient phosphorescent emission of geometrically confined organic tethers.
ABSTRACT
Four sterically distorted quaterpyridyl (qpy) ligand-bridged Ir(III)-Re(I) heterometallic complexes (Ir-qpymm-Re, Ir-qpymp-Re, Ir-qpypm-Re, and Ir-qpypp-Re), in which the position of the coupling pyridine unit of the two 2,2'-bipyridine ligands was varied (meta (m)- or para (p)-position), pypyx-pyxpy (x = m and m, qpymm; x = m and p, qpymp; x = p and m, qpypm; x = p and p, qpypp), were prepared, along with the fully π-conjugated Ir(III)-[π linker]-Re(I) complexes (π linker = 2,2'-bipyrimidine (bpm), Ir-bpm-Re; π linker = 2,5-di(pyridin-2-yl)pyrazine (dpp), Ir-dpp-Re) to elucidate the electron mediating and accumulative charge separation properties of the bridging π-linker in a bimetallic system (photosensitizer-π linker-catalytic center). From the photophysical and electrochemical studies, it was found that the quaterpyridyl (qpy) bridging ligand (BL), in which the two planar Ir/Re metalated bipyridine (bpy) ligands were connected but slightly canted relative to each other, linking the heteroleptic Ir(III) photosensitizer, [(piqC^N)2IrIII(bpy)]+, and catalytic Re(I) complex, (bpy)ReI(CO)3Cl, minimized the energy lowering of the qpy BL, which hampers the forward photoinduced electron transfer (PET) process from [(piqC^N)2IrIII(N^N)]+ to (N^N)ReI(CO)3Cl (Ered1 = -(0.85-0.93) V and Ered2 = -(1.15-1.30) V vs SCE). This result contrasts with the fully π-delocalized bimetallic systems (Ir-bpm-Re and Ir-dpp-Re) that show a significant energy reduction due to the considerable π-extension and deshielding effect caused by the neighboring Lewis acidic metals (Ir and Re) on the electrochemical scale (Ered1 = -0.37 V and Ered2 = -1.02 and -0.99 V vs SCE). Based on a series of anion absorption studies and spectroelectrochemical (SEC) analyses, all Ir(III)-BL-Re(I) bimetallic complexes were found to exist as dianionic form (Ir(III)-[BL]2--Re(I)) after a fast reductive-quenching process in the presence of excess electron donor. In the photolysis experiment, the four Ir-qpy-Re complexes displayed the reasonable photochemical CO2-to-CO conversion activities (TON of 366-588 for 19 h) owing to the moderated electronic coupling between two functional Ir(III) and Re(I) centers through the slightly distorted qpy ligand, whereas Ir-bpm-Re and Ir-dpp-Re displayed negligible performances as a result of the strong electronic coupling via π-conjugation between the two functional components resulting in the energetic constraints for PET and an unwanted side reactions competing with the forward processes. These results confirm that the qpy unit can be utilized as an efficient BL platform in π-linked bimetallic systems.
ABSTRACT
We report the electron transfer (ET) dynamics in a series of Ir(III)-Re(I) photocatalysts where two bipyridyl ligands of Ir and Re moieties are conjugated at the meta (m)- or para (p)-position of each side. Femtosecond transient absorption (TA) measurements identify the intramolecular ET (IET) dynamics from the Ir to Re moiety, followed by the formation of one-electron-reduced species (OERS) via the intermolecular ET with a sacrificial electron donor (SED). The IET rate depends on the bridging ligand (BL) structures (â¼25 ps for BLmm/mp vs â¼68 ps for BLpm/pp), while the OERS formation happens on an even slower time scale (â¼1.4 ns). Connecting the Re moiety at the meta-position of the bipyridyl of the Ir moiety can restrict the rotation around a covalent bond between two bipyridyl ligands by steric hindrances and facilitate the IET process. This highlights the importance of BL structures on the ET dynamics in photocatalysts.
ABSTRACT
To elucidate the key parameters governing the emission properties of phenylimidazole (pim)-based Ir(III) emitters, including their electronic structure and the bulky aryl substitution effect, a series of pim-based iridium(III) complexes (Ir(Rpim-X)3, Rpim-X = 1-R-2-(X-phenyl)-1H-imidazole) bearing secondary pendants of increasing bulkiness [R = methyl (Me), phenyl (Ph), terphenyl (TPh), or 4-isopropyl terphenyl (ITPh)] and three different primary pim ligands (X = F, F2, and CN) were designed and synthesized. Based on photophysical and electrochemical analyses, it was found that the excited state properties are highly dependent on the bulkiness of the secondary substituent and the inductive nature of the primary pim ligand. The incorporation of bulky TPh/ITPh substituents in the second coordination sphere significantly enhanced the emission efficiencies in the solid state (ΦPL = 72.1-84.9%) compared to those of the methyl- or phenyl-substituted Ir(III) complexes (ΦPL = 30.4% for Ir(Mepim)3 and 63.7% for Ir(Phpim)3). Further modification of the secondary aryl substituent (Ir(TPhpim)3 â Ir(ITPhpim)3) through the incorporation of an isopropyl group and F substitution on the primary pim ligand (Ir(TPh/ITPhpim)3 â Ir(TPh/ITPhpim-F/F2)3) resulted in a slight decrease in the LUMO and a significant decrease in the HOMO energy levels, respectively; these energy level adjustments consequently amplified emission blue shifts, thereby enabling efficient blue electroluminescence in phosphorescent organic light-emitting diodes. Theoretical calculations revealed that the excited-state properties of pim-based Ir(III) complexes can be modulated by the nature of the peripheral substituent and the presence of an EWG substituent. Among the fabricated blue-emitting TPh/ITPh-substituted Ir(III) complexes, Ir(ITPhpim-F)3, Ir(TPhpim-F2)3, and Ir(ITPhpim-F2)3 were tested as blue-emitting dopants for blue phosphorescent OLEDs owing to their high solid radiative quantum yields (ΦPL = 75.9-84.9%). The Ir(ITPhpim-F)3-doped multilayer device displayed the best performance with a maximum external quantum efficiency of 21.0%, a maximum current efficiency of 43.6 cd/A, and CIE coordinates of 0.18 and 0.31.
ABSTRACT
In this study, a p-type π-conjugated polymer chain, poly(3-hexylthiophene-2,5-diyl) (P3HT), was physically adsorbed onto n-type TiO2 nanoparticles functionalized with a molecular CO2 reduction catalyst, (4,4-Y2-bpy)ReI(CO)3Cl (ReP, Y = CH2PO(OH)2), to generate a new type of P3HT-heterogenized hybrid system (P3HT/TiO2/ReP), and its photosensitizing properties were assessed in a heteroternary system for photochemical CO2 reduction. We found that P3HT immobilization on TiO2 facilitated photoinduced electron transfer (PET) from photoactivated P3HT* to the n-type TiO2 semiconductor via rapid interfacial electron injection (â¼65 ps) at the P3HT and TiO2 surface interface (P3HT* â TiO2). With such effective charge separation, the heterogenization of P3HT onto TiO2 resulted in a steady electron supply toward the co-adsorbed Re(I) catalyst, attaining durable catalytic activity with a turnover number (TON) of â¼5300 over an extended time period of 655 h over five consecutive photoreactions, without deformation of the adsorbed P3HT polymer. The long-period structural stability of TiO2-adsorbed P3HT was verified based on a comparative analysis of its photophysical properties before and after 655 h of photolysis. To our knowledge, this conversion activity is the highest reported so far for polymer-sensitized photochemical CO2 reduction systems. This investigation provides insights and design guidelines for photocatalytic systems that utilize organic photoactive polymers as photosensitizing units.
ABSTRACT
Quantum dots (QDs) have emerged as an important class of materials for diverse applications such as solid-state lighting, energy conversion, displays, biomedicine, and plasmonics due to their excellent photonic properties and durability. Soft lithography, inkjet printing, nanoimprinting, and polymer deep-pen lithography are primary lithography techniques employed to implement micro-patterns with QDs, however, there are limited reports on QD photolithography using conventional photolithography processes suitable for mass production. This study reports a QD photolithography technique using a custom-developed QD photoresist made of an organic-inorganic hybrid coating layer. Using this QD photoresist, various QD micro-patterns, including red or green micro lines, RGB color filters for smartphone displays at 340 ppi, and atypical micro logo patterns of the Korea University, were successfully fabricated. Furthermore, various process parameters were developed for the QD photolithography with this custom QD photoresist, and the optical properties of the QD films were also investigated. To demonstrate its applicability in contemporary smartphone displays, the color coordinates of the QD films were compared to those of the BT.2020 standard. The chromaticity of the QD photoresist in CIE 1931 color space covered 98.7% of the NTSC (1987) area while providing more expansive color space. Overall, the QD photoresist and its photolithography techniques reported in this study hold great promise in various fields of QD-based applications, including bio-labeling, optical detectors, and solar cells.
ABSTRACT
To explore the excited-state electronic structure of the blue-emitting Ir(dmp)3 dopant material (dmp = 3-(2,6-dimethylphenyl)-7-methylimidazo[1,2-f]phenanthridine), which is notable for durable blue phosphorescent organic light-emitting diode (PhOLED), a series of homoleptic dmp-based Ir(III) complexes (DMP-R, tris[3-(2,6-dimethylphenyl)-7-R-imidazo[1,2-f]phenanthridin-12-yl-κC 12,κN 1]iridium, R = H, CH3, F, and CF3) were prepared by introducing an electron-donating group (EDG; -CH3) or an electron-withdrawing group (EWG; -F and -CF3) at the 7-position of the imidazo-phenanthridine ligand. The photophysical analysis demonstrated that the alteration from EDG to EWGs led to redshifted structureless emission profiles, which were correlated with variations in the 3MLCT/3ILCT ratio in the T1 excited state. From electrochemical studies and density functional theory calculations, it turned out that the excited-state nature of the dmp-based Ir(III) complexes was significantly affected by the inductive effect of the 7-substituent of the cyclometalating dmp ligand. As a result of the lowest unoccupied molecular orbital energy stabilization by the EWGs that suppressed the non-radiative pathway from the emissive triplet excited state to the 3 d-d state, the F- and CF3-modified Ir(dmp)3 complexes (DMP-F and DMP-CF 3 ) showed quantum yields of 27-30% in the solution state, which were at least 4- or 5-fold higher than those shown by DMP-H and DMP-CH 3 . A PhOLED device based on DMP-CF 3 [CIE chromaticity (0.17, 0.39)], which demonstrated a distinct 3MLCT characteristic, exhibited better electroluminescent efficiencies with an external quantum efficiency of 13.5% than that based on DMP-CH 3 .
ABSTRACT
Photocatalytic systems for CO2 reduction operate via complicated multi-electron transfer (ET) processes. A complete understanding of these ET dynamics can be challenging but is key to improving the efficiency of CO2 conversion. Here, we report the ET dynamics of a series of zinc porphyrin derivatives (ZnPs) in the photosensitization reactions where sequential ET reactions of ZnPs occur with a sacrificial electron donor (SED) and then with TiO2. We employed picosecond time-resolved fluorescence spectroscopy and femtosecond transient absorption (TA) measurement to investigate the fast ET dynamics concealed in the steady-state or slow time-resolved measurements. As a result, Stern-Volmer analysis of fluorescence lifetimes evidenced that the reaction of photoexcited ZnPs with SED involves static and dynamic quenching. The global fits to the TA spectra identified much faster ET dynamics on a few nanosecond-time scales in the reactions of one-electron reduced species (ZnPsâ¢-) with TiO2 compared to previously measured minute-scale quenching dynamics and even diffusion rates. We propose that these dynamics report the ET dynamics of ZnPsâ¢- formed at adjacent TiO2 without involving diffusion. This study highlights the importance of ultrafast time-resolved spectroscopy for elucidating the detailed ET dynamics in photosensitization reactions.
ABSTRACT
ConspectusDuring the last few decades, the design of catalytic systems for CO2 reduction has been extensively researched and generally involves (1) traditional approaches using molecular organic/organometallic materials and heterogeneous inorganic semiconductors and (2) combinatory approaches wherein these materials are combined as needed. Recently, we have devised a number of new TiO2-mediated multicomponent hybrid systems that synergistically integrate the intrinsic merits of various materials, namely, molecular photosensitizers/catalysts and n-type TiO2 semiconductors, and lower the energetic and kinetic barriers between components. We have termed such multicomponent hybrid systems assembled from the hybridization of various organic/inorganic/organometallic units in a single platform inorganometallic photocatalysts. The multicomponent inorganometallic (MIOM) hybrid system onto which the photosensitizer and catalyst are coadsorbed efficiently eliminates the need for bulk-phase diffusion of the components and avoids the accumulation of radical intermediates that invokes a degradation pathway, in contrast to the homogeneous system, in which the free reactive species are concentrated in a confined reaction space. In particular, in energetic terms, we discovered that in nonaqueous media, the conduction band (CB) levels of reduced TiO2 (TiO2(e-)) are positioned at a higher level (in the range -1.5 to -1.9 V vs SCE). This energetic benefit of reduced TiO2 allows smooth electron transfer (ET) from injected electrons (TiO2(e-)) to the coadsorbed CO2 reduction catalyst, which requires relatively high reducing power (at least more than -1.1 V vs SCE). On the other hand, the existence of various shallow surface trapping sites and surface bands, which are 0.3-1.0 eV below the CB of TiO2, efficiently facilitates electron injection from any photosensitizer (including dyes having low excited energy levels) to TiO2 without energetic limitation. This is contrasted with most photocatalytic systems, wherein successive absorption of single high-energy photons is required to produce excited states with enough energy to fulfill photocatalytic reaction, which may allow unwanted side reactions during photocatalysis. In this Account, we present our recent research efforts toward advancing these MIOM hybrid systems for photochemical CO2 reduction and discuss their working mechanisms in detail. Basic ET processes within the MIOM system, including intervalence ET in organic/organometallic redox systems, metal-to-ligand charge transfer of organometallic complexes, and interfacial/outer-sphere charge transfer between components, were investigated by conducting serial photophysical and electrochemical analyses. Because such ET events occur primarily at the interface between the components, the efficiency of interfacial ET between the molecular components (organic/organometallic photosensitizers and molecular reduction catalysts) and the bulk inorganic solid (mainly n-type TiO2 semiconductors) has a significant influence on the overall photochemical reaction kinetics and mechanism. In some TiO2-mediated MIOM hybrids, the chemical attachment of organic or organometallic photosensitizing units onto TiO2 semiconductors efficiently eliminates the step of diffusion/collision-controlled ET between components and prevents the accumulation of reactive species (oxidatively quenched cations or reductively quenched anions) in the reaction solution, ensuring steady photosensitization over an extended reaction period. The site isolation of a single-site organometallic catalyst employing TiO2 immobilization promotes the monomeric catalytic pathway during the CO2 reduction process, resulting in enhanced product selectivity and catalytic performance, including lifetime extension. In addition, as an alternative inorganic solid scaffold, the introduction of a host porphyrin matrix (interlinked in a metal-organic framework (MOF) material) led to efficient and durable photocatalytic CO2 conversion by the new MOF-Re(I) hybrid as a result of efficient light harvesting/exciton migration in the porphyrinic MOF and rapid quenching of the photogenerated electrons by the doped Re(I) catalytic sites. Overall, the case studies presented herein provide valuable insights for the rational design of advanced multicomponent hybrid systems for artificial photosynthesis involving CO2 reduction.
ABSTRACT
While the incorporation of pendant Brønsted acid/base sites in the secondary coordination sphere is a promising and effective strategy to increase the catalytic performance and product selectivity in organometallic catalysis for CO2 reduction, the control of product selectivity still faces a great challenge. Herein, we report two new trans(Cl)-[Ru(6-X-bpy)(CO)2Cl2] complexes functionalized with a saturated ethylene-linked functional group (bpy = 2,2'-bipyridine; X = -(CH2)2-OH or -(CH2)2-N(CH3)2) at the ortho(6)-position of bpy ligand, which are named Ru-bpyOH and Ru-bpydiMeN, respectively. In the series of photolysis experiments, compared to nontethered case, the asymmetric attachment of tethering ligand to the bpy ligand led to less efficient but more selective formate production with inactivation of CO2-to-CO conversion route during photoreaction. From a series of in situ FTIR analyses, it was found that the Ru-formate intermediates are stabilized by a highly probable hydrogen bonding between pendent proton donors (-diMeN+H or -OH) and the oxygen atom of metal-bound formate (RuI-OCHO···H-E-(CH2)2-, E = O or diMeN+). Under such conformation, the liberation of formate from the stabilized RuI-formate becomes less efficient compared to the nontethered case, consequently lowering the CO2-to-formate conversion activities during photoreaction. At the same time, such stabilization of Ru-formate species prevents the dehydration reaction route (η1-OCHO â η1-COOH on Ru metal) which leads toward the generation of Ru-CO species (key intermediate for CO production), eventually leading to the reduction of CO2-to-CO conversion activity.
ABSTRACT
Herein, we employed a molecular Ru(II) catalyst immobilized onto TiO2 particulates of (4,4'-Y2-bpy)RuII(CO)2Cl2 (RuP; Y = CH2PO(OH)2), as a hybrid catalyst system to secure the efficient and steady catalytic activity of a molecular bipyridyl Ru(II)-complex-based photocatalytic system for CO2 reduction. From a series of operando FTIR spectrochemical analyses, it was found that the TiO2-fixed molecular Ru(II) complex leads to efficient stabilization of the key monomeric intermediate, RuII-hydride (LRuII(H)(CO)2Cl), and suppresses the formation of polymeric Ru(II) complex (-(L(CO)2Ru-Ru(CO)2L)n-), which is a major deactivation product produced during photoreaction via the Ru-Ru dimeric route. Active promotion of the monomeric catalytic route in a hetero-binary system (IrPS + TiO2/RuP) that uses TiO2-bound Ru(II) complex as reduction catalyst led to highly increased activity as well as durability of photocatalytic behavior with respect to the homogeneous catalysis of free Ru(II) catalyst (IrPS + Ru(II) catalyst). This catalytic strategy produced maximal turnover numbers (TONs) of >4816 and >2228, respectively, for CO and HCOO- production in CO2-saturated N,N-dimethylformamide (DMF)/TEOA (16.7 vol % TEOA) solution containing a 0.1 M sacrificial electron donor.
ABSTRACT
PURPOSE: To compare quantitative visual tests, such as visual acuity, contrast sensitivity, and color vision tests in patients with primary open-angle glaucoma (POAG) patients according to three different light systems with different color-rendering index (CRI). METHODS: This was a cross-sectional study of 36 eyes in 36 patients with POAG. Three different light systems consisting of a 3-band fluorescent lamp (CRI 80), a white LED (CRI 75), and a quantum dot LED (CRI > 95) were used. All lights had the same illuminance of 230 lx to exclude illuminance effects. The visual testing included best-corrected visual acuity (BCVA) using an ETDRS chart, a CSV-1000E contrast test, and a color test performed by the Farnsworth Munsell 100-hue test. RESULTS: There was no significant difference in BCVA (p = 0.86). There were no significant differences in the detail contrast tests according to the three light systems (p = 0.95, p = 0.94, p = 0.94, respectively, p = 0.64). There was significant difference between the three light systems in color test (p = 0.042). The color test scores with a quantum dot LED were significantly lower than those of the white LED and 3-band fluorescent lamp (p = 0.03 and 0.047, respectively). CONCLUSIONS: POAG patients did not show significant differences in visual acuity scores and contrast test scores, expressed as black and white symbols, according to the different light systems. However, POAG patients tested under a quantum dot LED (CRI > 95) could distinguish color differences better than in the other light systems.
Subject(s)
Glaucoma, Open-Angle , Color Perception , Contrast Sensitivity , Cross-Sectional Studies , Glaucoma, Open-Angle/diagnosis , Humans , Vision TestsABSTRACT
A porphyrinic metal-organic framework (PMOF) known as PCN-222(Zn) was chemically doped with a molecular Re(I) catalyst-bearing carboxylate anchoring group to form a new type of metal-organic framework (MOF)-Re(I) hybrid photocatalyst. The porphyrinic MOF-sensitized hybrid (PMOF/Re) was prepared with an archetypical CO2 reduction catalyst, (L)ReI(CO)3Cl (Re(I); L = 4,4'-dicarboxylic-2,2'-bipyridine), in the presence of 3 vol % water produced CO with no leveling-off tendency for 59 h to give a turnover number of ≥1893 [1070 ± 80 µmol h-1 (g MOF)-1]. The high catalytic activity arises mainly from efficient exciton migration and funneling from photoexcited porphyrin linkers to the peripheral Re(I) catalytic sites, which is in accordance with the observed fast exciton (energy) migration (≈1 ps) in highly ordered porphyrin photoreceptors and the effective funneling into Re(I) catalytic centers in the Re(I)-doped PMOF sample. Enhanced catalytic performance is convincingly supported by serial photophysical measurements including decisive Stern-Volmer interpretation.
ABSTRACT
To evaluate the efficacy of ortho-arylation in the second coordination sphere of octahedral iridium complex, a series of homoleptic N-heterocyclic carbene (NHC)-based Ir(Câ§CR)3-type complexes were designed and prepared by introducing various substituents (R = H, Me, Ph, MePh, and diMePh) at the ortho-position of the aryl unit of the orthometalated phenyl group. In solution, an unnoticeable increase of emission quantum yields was observed within the variation of the ortho-substituent of the sterically demanding side-branch, a diMePh- group, showing the radiative quantum yield of mer-Ir(Câ§CdiMePh)3 (ΦPL = 1.9%), being higher than that of the unsubstituted carbene-based mer-Ir(Câ§CH)3 (ΦPL = 1.2%), due to a considerable difference in the nonradiative decay rate (knr = 65.40 × 105 s-1 for mer-Ir(Câ§CdiMePh)3 vs knr = 141.1 × 105 s-1 for mer-Ir(Câ§CH)3). Such a difference is attributed to the reduction of nonradiative pathway via the 3MLCT â 3MC transition by the widening gap between triplet emissive states and 3MC state, and a rigidity increase in structure by steric hindrance of bulky aryl substituent. In contrast, significant increase of emission quantum yield was observed in the films cast by spin coating, and fac-/mer-Ir(Câ§CdiMePh)3 (ΦPL = 60.1/49.1%) were the most efficient ones among NHC-Ir(III) complexes, compatible with the assumption that the secondary coordination effect, i.e. a peripheral constraint, was put into action. As the substituent R increases in size on going from H, Me, Ph, MePh, to diMePh, notable structural changes in the periphery are evident, while an increase of emission quantum yields is also seen. Such a peripheral difference was under scrutiny first with X-ray structural studies, and its manifestation in photophysics was investigated along with quantum calculations that finally addressed the peripheral effect being maximized at R = diMePh. In the application of PhOLED, the mer-Ir(Câ§CdiMePh)3-doped multilayer device showed highly enhanced efficiency with an external quantum efficiency (EQE) of up to 8.1%, compared to that of the mer-Ir(Câ§CH)3-based device (1.2%), indicating the multiple positive effects of bulky aryl substitution of Ir(III) dopant. A deep-blue CIE chromaticity diagram (0.16, 0.09) was achieved from the device using mer-Ir(Câ§CdiMePh)3 as a dopant.
ABSTRACT
Herein, we report the synthesis, and photochemical and -physical properties, as well as the catalytic performance, of a series of heteroleptic IrIII photosensitizers (IrPSs), [Ir(C^N)2 (N^NAryl )]+ , possessing ancillary ligands that are varied with aryl-substituents on bipyridyl unit [C^N=(2-pyridyl)benzo[b]thiophen-3-yl (btp); N^NAryl =4,4'-Y2 -bpy (Y=-Ph or -PhSi(Ph)3 ]. We found that the π-extension of bipyridyl ligand by aryl-substitution put bipyridyl ligand in use as an electron relay unit that performed charge accumulation before delivering to the catalytic center, greatly improving the overall CO2 -to-CO conversion activities. In a typical run, the aryl-substituted IrPS (tBu IrP-PhSi )-sensitized homogeneous systems (IrPS+ReI catalyst) gave a turnover number of 1340 (ΦCO =24.2 %) at the early stage of photolysis (<5â h). This study demonstrates that the π-character modulation on the ancillary bipyridyl ligand is critical for forthcoming catalytic performance.
ABSTRACT
Incorporation of an electron-withdrawing -SO2CF3 substituent to cyclometalating C^N-phenylpyridine (ppy) ligand resulted in an expected blue-shifted phosphorescence in the corresponding homoleptic Ir(ppySCF3)3 complex, showing the emission of λem = 464 nm at 300 K. One of its heteroleptic derivatives, modified by a pyrazolyl borate LX ligand, Ir(ppySCF3)2(bor), exhibited further blue-shifted phosphorescence of λem = 460 nm at 300 K. Cyclic voltammograms (CVs) and density-functional theory (DFT) calculations supported the efficacy of the electron-withdrawing capability of the SO2CF3 substituent lowering HOMO energy and obtained widened bandgaps and resumed blue emissions for all of the iridium complexes studied. The homoleptic complexes of both substituents, Ir(ppySCF3)3 and Ir(ppySF)3, reached the higher quantum yields (ΦPL) of (0.89 and 0.72), respectively. Similarly, emission quantum yields (ΦPL) of the heteroleptic derivatives were reported to be (0.75, 0.83, and 0.87) for Ir(ppySCF3)2(acac), Ir(ppySCF3)2(bor), and Ir(ppySCF3)2(pic), respectively. Emission kinetics support the enhanced quantum efficiency when kr and knr values are compared between Ir(ppySCF3)3 and Ir(ppySF)3, and both values favorably contribute to attaining a higher quantum efficiency for Ir(ppySCF3)3. Among solution-processed multilayered devices having an ITO/PEDOT:PSS/TCTA:Ir dopant (10:1, w/w)/TmPyPB/Liq/Al structure, a heteroleptic dopant, Ir(ppySCF3)2(bor), exhibited better device performance, reporting an external quantum efficiency (EQE) of 1.14%, current efficiency (CE) of 2.31 cd A-1, and power efficiency (PE) of 1.21 lm W-1, together with blue chromaticity of CIEx,y = (0.16, 0.32).
ABSTRACT
Red light-sensitized squaraine (SQ) dyes were developed and incorporated into dye-sensitized catalysts (DSCs) with the formula of SQ/TiO2/Cat, and their efficacies were evaluated in terms of performance on either water or carbon dioxide reduction. Pt nanoparticles or fac-[Re(4,4'-bis-(diethoxyphosphorylmethyl)-2,2'-bipyridine)(CO)3Cl] were used as each catalytic center within the DSC frame of SQ/TiO2/Pt (Type I) or SQ/TiO2/Re(I) (Type II). In order to convey the potential utility of SQ in low energy sensitization, the following catalytic reductions were carried out under selective lower energy irradiation (>500 nm). Type I and II showed different catalytic performances, primarily due to the choice of solvent for each catalytic condition: hydrogenation was carried out in H2O, but CO2 reduction in dimethylformamide (DMF), and SQ was more stable in aqueous acid conditions for hydrogen generation than CO2 reduction in DMF. A suspension of Type I in 3 mL water containing 0.1 M ascorbic acid (pH = 2.66) resulted in efficient photocatalytic hydrogen evolution, producing 37 µmol of H2 for 4 h. However, in photocatalysis of Type II (SQ/TiO2/Re(I)) in 3 mL DMF containing 0.1 M 1,3-dimethyl-2-phenyl-1,3-dihydrobenzimidazole, the TiO2-bound SQ dyes were not capable of working as a low energy sensitizer because SQ was susceptible to dye decomposition in nucleophilic DMF conditions, resulting in DSC deactivation for the CO2 reduction. Even with the limitation of solvent, the DSC conditions for the utility of SQ have been established: the anchoring group effect of SQ with either phosphonic acid or carboxylic acid onto the TiO2 surface; energy alignment of SQ with the flat band potentials (E fb) of TiO2 semiconductors and the reduction power of electron donors; and the wavelength range of the light source used, particularly when >500 nm.
ABSTRACT
A series of heteroleptic iridium(III) complexes functionalized with two phosphonic acid (-PO3 H2 ) groups (dfppy IrP, ppy IrP, btp IrP, and piq IrP) were prepared and anchored onto rhenium(I) catalyst (ReP)-loaded TiO2 particles (TiO2 /ReP) to build up a new IrP-sensitized TiO2 photocatalyst system (IrP/TiO2 /ReP). The photosensitizing behavior of the IrP series was examined within the IrP/TiO2 /ReP platform for the photocatalytic conversion of CO2 into CO. The four IrP-based ternary hybrids showed increased conversion activity and durability than that of the corresponding homo- (IrP+ReP) and heterogeneous (IrP+TiO2 /ReP) mixed systems. Among the four IrP/TiO2 /ReP photocatalysts, the low-energy-light (>500â nm) activated piq IrP immobilized ternary system (piq IrP/TiO2 /ReP) exhibited the most durable conversion activity, giving a turnover number of ≥730 for 170â h. A similar kinetic feature observed through time-resolved photoluminescence measurements of both btp IrP/TiO2 and TiO2 -free btp IrP films suggests that the net electron flow in the ternary hybrid proceeds dominantly through a reductive quenching mechanism, unlike the oxidative quenching route of typical dye/TiO2 -based photolysis.