ABSTRACT
Chemical warfare agents pose significant threats in the 21st century, especially for armed forces. A colorimetric detection array was developed to identify warfare mimics, including mustard gas and nerve agents. In total, 188 sensors were screened to determine the best sensor performance, in order to identify warfare mimics 2-chloro ethyl ethylsulfide, 2-2'-thiodiethanol, trifluoroacetic acid, methylphosphonic acid, dimethylphosphite, diethylcyanophosphonate, and diethyl (methylthiomethyl)phosphonate. The highest loadings in the principle component analysis (PCA) plots were used to identify the sensors that were most effective in analyzing the RGB data to classify the warfare mimics. The dataset was reduced to only twelve sensors, and PCA results gave comparable results as the large data did, demonstrating that only twelve sensors are needed to classify the warfare mimics.
Subject(s)
Chemical Warfare Agents/analysis , Colorimetry/methods , Chemical Warfare Agents/chemistry , Color , Principal Component AnalysisABSTRACT
Solid supported colorimetric sensing arrays have the advantage of portability and ease of use when deployed in the field, such as crime scenes, disaster zones, or in war zones, but many sensor arrays require complex fabrication methods. Here, we report a practical method for the fabrication of 4 × 4 colorimetric sensor arrays, which are printed on nylon membranes, using a commercially available inkjet printer. In order to test the efficacy of the printed arrays, they were exposed to 43 analytes at concentrations ranging from 0.001 to 3.0 M for a total of 559 samples of inorganic and organic acids or bases including hydrochloric, acetic, phthalic, malonic, picric, and trifluoroacetic acid, ammonium hydroxide, sodium hydroxide, lysine, and water as the control. Colorimetric data from the imaged arrays was analyzed with linear discriminant analysis and k-nearest neighbors to determine the analyte and concentration with â¼88-90% accuracy. Overall, the arrays have impressive analytical power to identify a variety of analytes at different concentrations while being simple to fabricate.
Subject(s)
Carboxylic Acids/analysis , Colorimetry/methods , Hydrochloric Acid/analysis , Hydroxides/analysis , Lysine/analysis , Colorimetry/instrumentation , Discriminant Analysis , PrintingABSTRACT
With the increasing availability of digital imaging devices, colorimetric sensor arrays are rapidly becoming a simple, yet effective tool for the identification and quantification of various analytes. Colorimetric arrays utilize colorimetric data from many colorimetric sensors, with the multidimensional nature of the resulting data necessitating the use of chemometric analysis. Herein, an 8 sensor colorimetric array was used to analyze select acid and basic samples (0.5 - 10 M) to determine which chemometric methods are best suited for classification quantification of analytes within clusters. PCA, HCA, and LDA were used to visualize the data set. All three methods showed well-separated clusters for each of the acid or base analytes and moderate separation between analyte concentrations, indicating that the sensor array can be used to identify and quantify samples. Furthermore, PCA could be used to determine which sensors showed the most effective analyte identification. LDA, KNN, and HQI were used for identification of analyte and concentration. HQI and KNN could be used to correctly identify the analytes in all cases, while LDA correctly identified 95 of 96 analytes correctly. Additional studies demonstrated that controlling for solvent and image effects was unnecessary for all chemometric methods utilized in this study.
ABSTRACT
A variety of direct and indirect methods have been used to quantify planktonic and biofilm bacterial cells. Direct counting methods to determine the total number of cells include plate counts, microscopic cell counts, Coulter cell counting, flow cytometry, and fluorescence microscopy. However, indirect methods are often used to supplement direct cell counting, as they are often more convenient, less time-consuming, and require less material, while providing a number that can be related to the direct cell count. Herein, an indirect method is presented that uses fluorescence emission intensity as a proxy marker for studying bacterial accumulation. A clinical strain of Pseudomonas aeruginosa was genetically modified to express a green fluorescent protein (PA14/EGFP). The fluorescence intensity of EGFP in live cells was used as an indirect measure of live cell density, and was compared with the traditional cell counting methods of optical density (OD600) and plate counting (colony-forming units (CFUs)). While both OD600 and CFUs are well-established methods, the use of fluorescence spectroscopy to quantify bacteria is less common. This study demonstrates that EGFP intensity is a convenient reporter for bacterial quantification. In addition, we demonstrate the potential for fluorescence spectroscopy to be used to measure the quantity of PA14/EGFP biofilms, which have important human health implications due to their antimicrobial resistance. Therefore, fluorescence spectroscopy could serve as an alternative or complementary quick assay to quantify bacteria in planktonic cultures and biofilms.
ABSTRACT
Plant root exudates are important mediators in the interactions that occur between plants and microorganisms in the soil, yet much remains to be learned about spatial and temporal variation in their production. This work outlines a method utilizing a novel colorimetric paper to detect spatial and temporal changes in the production of nitrogen-containing compounds on the root surface. While existing methods have made it possible to conduct detailed analysis of root exudate composition, relatively less is known about where in the root system exudates are produced and how this localization changes as the root grows. Furthermore, there is much to learn about how exudate localization and composition varies in response to stress. Root exudates are chemically diverse secretions composed of organic acids, amino acids, proteins, sugars, and other metabolites. The sensor utilized for the method, ninhydrin, is a colorless substance in solution that reacts with free amino groups to form a purple dye. A detection paper was developed by formulating ninhydrin into a print solution that was uniformly deposited onto paper with a commercial ink jet printer. This "ninhydrin paper" was used to analyze the chemical makeup of root surfaces from maize seedlings grown vertically on germination paper. Through contact between the ninhydrin paper and seedling root surfaces, combined with images of both the seedlings and dried ninhydrin papers captured using a standard flatbed scanner, nitrogen-containing substances on the root surface can be localized and concentration of signal estimated for over 2 weeks of development. The method was found to be non-inhibiting to plant growth over the analysis period although damage to root hairs was observed. The method is sensitive in the detection of free amines at concentrations as little as 140 µM. Furthermore, ninhydrin paper is stable, showing consistent color changes up to 2 weeks after printing. This relatively simple, low-cost method could contribute to a better understanding of root exudates and mechanisms used by plants to interact with the complex soil environment during growth and development.
ABSTRACT
There is a significant demand for devices that can rapidly detect chemical-biological-explosive (CBE) threats on-site and allow for immediate responders to mitigate spread, risk, and loss. The key to an effective reconnaissance mission is a unified detection technology that analyzes potential threats in real time. In addition to reviewing the current state of the art in the field, this review illustrates the practicality of colorimetric arrays composed of sensors that change colors in the presence of analytes. This review also describes an outlook toward future technologies, and describes how they could possibly be used in areas such as war zones to detect and identify hazardous substances.
Subject(s)
Chemical Warfare , Colorimetry/methods , Explosive Agents/analysis , Colorimetry/instrumentation , Hazardous Substances/analysisABSTRACT
Crystal growth, structure determination, and magnetic properties of LnCr2Al(20-x)Fe(x) (Ln = La, Gd, Yb) adopting the CeCr2Al20 structure type with space group Fd3m, a â¼ 14.5 Å, are reported. Single crystal X-ray diffraction and Mössbauer spectroscopy are employed to fully characterize the crystal structure of LnCr2Al(20-x)Fe(x) (Ln = La, Gd, Yb). LnCr2Al(20-x)Fe(x) (Ln = La, Gd, Yb) are the first pseudoternaries adopting the CeCr2Al20 structure type with a transition metal occupying the main group site. The Yb analogues are Pauli paramagnets with the Yb ion adopting an electronic configuration close to Yb(2+), while the Gd analogues show paramagnetic behavior with no magnetic order down to 3 K.
ABSTRACT
Ln(Cu,Al,Ga)(13-x) (Ln = La-Pr, and Eu; x ~ 0.2) were synthesized by a combined Al/Ga flux. Single crystal X-ray and neutron diffraction experiments revealed that these compounds crystallize in the NaZn(13) structure-type (space group Fm3[overline]c) with lattice parameters of a ~ 12 Å, V ~ 1600 Å, and Z ~ 8. Our final neutron models led us to conclude that Cu is occupationally disordered on the 8b Wyckoff site while Cu, Al, and Ga are substitutionally disordered on the 96i Wyckoff site of this well-known structure-type. The magnetic susceptibility data show that Ce(Cu,Al,Ga)(13-x) and Pr(Cu,Al,Ga)(13-x) exhibit paramagnetic behavior down to the lowest temperatures measured while Eu(Cu,Al,Ga)(13-x) displays ferromagnetic behavior below 6 K. Eu(Cu,Al)(13-x) was prepared via arc-melting and orders ferromagnetically below 8 K. The magnetocaloric properties of Eu(Cu,Al,Ga)(13-x) and Eu(Cu,Al)(13-x) were measured and compared. Additionally, an enhanced value of the Sommerfeld coefficient (γ = 356 mJ/mol-K(2)) was determined for Pr(Cu,Al,Ga)(13-x). Herein, we present the synthesis, structural refinement details, and physical properties of Ln(Cu,Al,Ga)(13-x) (Ln = La-Pr, and Eu) and Eu(Cu,Al)(13-x).
ABSTRACT
LnCu(2)(Al,Si)(5) (Ln = La and Ce) were synthesized and characterized. These compounds adopt the SrAu(2)Ga(5) structure type and crystallize in the tetragonal space group P4/mmm with unit cell dimensions of a ≈ 4.2 Å and c ≈ 7.9 Å. Herein, we report the structure as obtained from single crystal X-ray diffraction. Additionally, we report the magnetic susceptibility, magnetization, resistivity, and specific heat capacity data obtained for polycrystalline samples of LnCu(2)(Al,Si)(5) (Ln = La and Ce).
ABSTRACT
The title compound, C(24)H(42)N(2)O(7), is a chiral lactam-constrained amino acid with a six-membered ring backbone and isopropyl and tert-butyl ester side chains. The conformation of the six-membered ring can be described as a half chair, with two CH(2) C atoms lying 0.443â (1) and -0.310â (1)â Å out of the best plane of the other four atoms (mean deviation = 0.042â Å). Both N atoms are sp(2) hybridized, lying 0.0413â (9) and 0.067â (1)â Å out of the planes defined by the three C atoms bonded to them. The absolute configuration was determined, based on resonant scattering of light atoms in Cu Kα radiation.
ABSTRACT
Single crystals of CeM2 and GdM2 (M = Ag, Al, and Si) were grown by the flux growth technique and characterized by means of single crystal x-ray diffraction, magnetic susceptibility, resistivity, and heat capacity measurements. CeM2 and GdM2 crystallize in the tetragonal I4(1)/amd space group with the α-ThSi2 structure type with lattice parameters a ~4.2 Å and c ~14.4 Å. Curie-Weiss behavior is observed for both analogues with CeM2 ordering first ferromagnetically at 11 K with a second antiferromagnetic transition at 8.8 K while GdM2 orders antiferromagnetically at 24 K. Heat capacity measurements on CeM2 show two magnetic transitions at 10.8 and 8.8 K with an electronic specific heat coefficient, γ(0), of ~53 mJ K(-2) mol(-1). The entropy at the magnetic transition is less than the expected Rln2 for CeM2, reinforcing the assertions of an enhanced mass state and Kondo behavior being observed in the resistivity.
ABSTRACT
Ln(4)FeGa(12), where Ln is Y, Tb, Dy, Ho, and Er, prepared by flux growth, crystallize with the cubic Y(4)PdGa(12) structure with the Im3m space group and with a = 8.5650(4), 8.5610(4), 8.5350(3), 8.5080(3), and 8.4760(3) A, respectively. The crystal structure consists of an iron-gallium octahedra and face-sharing rare-earth cuboctahedra of the Au(3)Cu type. Er(4)Fe(0.67)Ga(12) is iron-deficient, leading to a distortion of the octahedral and cuboctahedral environments due to the splitting of the Ga2 site into Ga2 and Ga3 sites. Further, interstitial octahedral sites that are unoccupied in Ln(4)FeGa(12) (Ln = Y, Tb, Dy, and Ho) are partially occupied by Fe2. Y(4)FeGa(12) exhibits weak itinerant ferromagnetism below 36 K. In contrast, Tb(4)FeGa(12), Dy(4)FeGa(12), Ho(4)FeGa(12), and Er(4)Fe(0.67)Ga(12) order antiferromagnetically with maxima in the molar magnetic susceptibilities at 26, 18.5, 9, and 6 K. All of the compounds exhibit metallic electric resistivity, and their iron-57 Mossbauer spectra, obtained between 4.2 and 295 K, exhibit a single-line absorption with a 4.2 K isomer shift of ca. 0.50 mm/s, a shift that is characteristic of iron in an iron-gallium intermetallic compound. A small but significant broadening in the spectral absorption line width is observed for Y(4)FeGa(12) below 40 K and results from the small hyperfine field arising from its spin-polarized itinerant electrons.