Creating pairs of exceptional points for arbitrary polarization control: asymmetric vectorial wavefront modulation.

Exceptional points (EPs) can achieve intriguing asymmetric control in non-Hermitian systems due to the degeneracy of eigenstates. Here, we present a general method that extends this specific asymmetric response of EP photonic systems to address any arbitrary fully-polarized light. By rotating the meta-structures at EP, Pancharatnam-Berry (PB) phase can be exclusively encoded on one of the circular polarization-conversion channels. To address any arbitrary wavefront, we superpose the optical signals originating from two orthogonally polarized -yet degenerate- EP eigenmodes. The construction of such orthogonal EP eigenstates pairs is achieved by applying mirror-symmetry to the nanostructure geometry flipping thereby the EP eigenmode handedness from left to right circular polarization. Non-Hermitian reflective PB metasurfaces designed using such EP superposition enable arbitrary, yet unidirectional, vectorial wavefront shaping devices. Our results open new avenues for topological wave control and illustrate the capabilities of topological photonics to distinctively operate on arbitrary polarization-state with enhanced performances.

Disordered topological graphs enhancing nonlinear phenomena.

Complex networks play a fundamental role in understanding phenomena from the collective behavior of spins, neural networks, and power grids to the spread of diseases. Topological phenomena in such networks have recently been exploited to preserve the response of systems in the presence of disorder. We propose and demonstrate topological structurally disordered systems with a modal structure that enhances nonlinear phenomena in the topological channels by inhibiting the ultrafast leakage of energy from edge modes to bulk modes. We present the construction of the graph and show that its dynamics enhances the topologically protected photon pair generation rate by an order of magnitude. Disordered nonlinear topological graphs will enable advanced quantum interconnects, efficient nonlinear sources, and light-based information processing for artificial intelligence.

Scalable manufacturing of quantum light emitters in silicon under rapid thermal annealing.

Quantum light sources play a fundamental role in quantum technologies ranging from quantum networking to quantum sensing and computation. The development of these technologies requires scalable platforms, and the recent discovery of quantum light sources in silicon represents an exciting and promising prospect for scalability. The usual process for creating color centers in silicon involves carbon implantation into silicon, followed by rapid thermal annealing. However, the dependence of critical optical properties, such as the inhomogeneous broadening, the density, and the signal-to-background ratio, on centers implantation steps is poorly understood. We investigate the role of rapid thermal annealing on the dynamic of the formation of single color centers in silicon. We find that the density and the inhomogeneous broadening greatly depend on the annealing time. We attribute the observations to nanoscale thermal processes occurring around single centers and leading to local strain fluctuations. Our experimental observation is supported by theoretical modeling based on first principles calculations. The results indicate that annealing is currently the main step limiting the scalable manufacturing of color centers in silicon.

Scalable single-mode surface-emitting laser via open-Dirac singularities.

Single-aperture cavities are a key component of lasers that are instrumental for the amplification and emission of a single light mode. However, the appearance of high-order transverse modes as the size of the cavities increases has frustrated efforts to scale-up cavities while preserving single-mode operation since the invention of the laser six decades ago1-8. A suitable physical mechanism that allows single-mode lasing irrespective of the cavity size-a 'scale invariant' cavity or laser-has not been identified yet. Here we propose and demonstrate experimentally that open-Dirac electromagnetic cavities with linear dispersion-which in our devices are realized by a truncated photonic crystal arranged in a hexagonal pattern-exhibit unconventional scaling of losses in reciprocal space, leading to single-mode lasing that is maintained as the cavity is scaled up in size. The physical origin of this phenomenon lies in the convergence of the complex part of the free spectral range in open-Dirac cavities towards a constant governed by the loss rates of distinct Bloch bands, whereas for common cavities it converges to zero as the size grows, leading to inevitable multimode emission. An unconventional flat-envelope fundamental mode locks all unit cells in the cavity in phase, leading to single-mode lasing. We name such sources Berkeley surface-emitting lasers (BerkSELs) and demonstrate that their far-field corresponds to a topological singularity of charge two, in agreement with our theory. Open-Dirac cavities unlock avenues for light-matter interaction and cavity quantum electrodynamics.

Tunable and enhanced optical force with bound state in the continuum.

Light-actuated motors, vehicles, and even space sails have drawn tremendous attention for basic science and applications in space, biomedical, and sensing domains. Optical bound states in the continuum (BIC) are topological singularities of the scattering matrix, known for their unique light-trapping capability and enhanced light-matter interaction. We show that BIC modes enable the generation of enhanced and tunable optical forces and torques. A sharp and controllable line shape is observed in force and torque spectra when approaching high-Q resonance BIC modes. Wavelength and polarization tunability are presented as an effective method to control forces on BIC enclosed structures. Finally finite-size simulations are performed to evaluate the practical applications for a BIC-assisted metavehicle.

Plasmonic topological metasurface by encircling an exceptional point.

Resonant scattering, guided mode propagation phase, and/or orientation-dependent phase retardations are the three main mechanisms used to date to conceive optical metasurfaces. Here, we introduce an additional degree of freedom to address optical phase engineering by exploiting the topological features of non-Hermitian matrices operating near their singular points. Choosing metasurface building blocks to encircle a singularity following an arbitrarily closed trajectory in parameter space, we engineered a topologically protected full 2π-phase on a specific reflected polarization channel. The ease of implementation together with its compatibility with other phase-addressing mechanisms bring topological properties into the realm of industrial applications at optical frequencies and prove that metasurface technology represents a convenient test bench to study and validate topological photonic concepts.

Experimental demonstration of single-mode topological valley-Hall lasing at telecommunication wavelength controlled by the degree of asymmetry.

Topology plays a fundamental role in contemporary physics and enables new information processing schemes and wave device physics with built-in robustness. However, the creation of photonic topological phases usually requires complex geometries that limit the prospect for miniaturization and integration and dispossess designers of additional degrees of freedom needed to control topological modes on-chip. By controlling the degree of asymmetry (DoA) in a photonic crystal with broken inversion symmetry, we report single-mode lasing of valley-Hall ring cavities at telecommunication wavelength. The DoA governs four photon confinement regimes at the interface of topologically distinct valley-Hall domains and evidences an interplay between the width of the topological bandgap and the quality factor of ring-like modes for single-mode operation. Our results open the door to novel optoelectronic devices and systems based on compact topological integrated circuits.

Doping-induced plateau of strong electromagnetic confinement in the momentum space.

In this Letter, we present a design strategy for the realization of electrically powered bound states in the continuum (BIC) lasers. Despite growing attention of the optics community for BICs, practical uses of BICs in an active device are still unestablished. A large index contrast and out-of-plane symmetries that aid the formation of BICs are not trivial to achieve using conventional approaches for semiconductor laser design. Here, we propose a doping scheme to circumvent this issue. We also show that the introduction of material absorption due to carriers deteriorates the quality factor of BIC modes and show that a suitable compromise between electrical conductivity and optical loss can be achieved.

Octave bandwidth photonic fishnet-achromatic-metalens.

Planar structured interfaces, also known as metasurfaces, are continuously attracting interest owing to their ability to manipulate fundamental attributes of light, including angular momentum, phase, or polarization. However, chromatic aberration, limiting broadband operation, has remained a challenge for metasurfaces-based optical components and imagers. The limitation stems from the intrinsic dispersion of existing materials and design principles. Here we report and experimentally demonstrate polarization-independent fishnet-achromatic-metalenses with measured average efficiencies over 70% in the continuous band from the visible (640 nm) to the infrared (1200 nm). Results of the scalable platform are enabling for applications requiring broad bandwidth and high efficiency including energy harvesting, virtual reality and information processing devices, or medical imaging.

Lasing action in low-resistance nanolasers based on tunnel junctions.

We experimentally demonstrate the lasing action of a new nanolaser design with a tunnel junction. By using a heavily doped tunnel junction for hole injection, we can replace the p-type contact material of a conventional nanolaser diode with a low-resistance n-type contact layer. This leads to a significant reduction of the device resistance and lowers the threshold voltage from 5 V to around 0.95 V at 77 K. The lasing behavior is verified by the light output versus the injection current (L-I) characterization and second-order coherence function measurements. Because of less Joule heating during current injection, the nanolaser can be operated at temperatures as high as 180 K under CW pumping. The incorporation of heavily doped tunnel junctions may pave the way for other nanoscale cavity design for improved heat management.

Broadband and linear polarization metasurface carpet cloak in the visible.

In the past few years, carpet cloaking has attracted interest because of its feasibility at optical frequencies and potential in stealth technologies. Metasurfaces have been proposed as a method to engineer ultra-thin carpet cloaking surfaces due to their abilities to manipulate wavefronts, polarization, and phase at subwavelength scale. However, achieving broadband carpet cloaking with a significant bandwidth is one of the key remaining challenges for metasurface designs. To date, broadband carpet cloaking based on metasurfaces has not been achieved, and operation has been limited to discrete wavelengths. Here, we propose and numerically demonstrate a novel metasurface design for broadband carpet cloaking with linear polarization at visible wavelengths from 650 nm to 800 nm. Our proposed method is a promising approach for broadband structured interfaces.

Efficient design of random metasurfaces.

Random media introduce large degrees of freedom in device design and can thus address challenges in manipulating optical waves. Wave shaping with metasurfaces has mainly utilized periodic or quasi-periodic grids, and the potential of random arrangement of particles for devices has only come under investigation recently. The main difficulty in pursuing random metasurfaces is the identification of the degrees of freedom that optimize their efficiencies and functions. They can also encode information using the statistics of particle distribution. We propose a phase-map that accounts for the statistical nature of random media. The method takes into account effects of random near-field couplings that introduce phase errors by affecting the phase shift of elements. The proposed approach increases the efficiency of our random metasurface devices by up to ∼20%. This work paves the way toward the efficient design of random metasurfaces with potential applications in highly secure optical cryptography and information encoding.

Planar dielectric cylindrical lens at 800 nm and the role of fabrication imperfections.

Conventional optical components have been proposed to realize high-quality line focusing with uniform intensity distribution such as cylindrical lenses, segmented wedge-arrays, or a combination of prisms and spherical mirrors. Numerous factors such as the manufacturing tolerances or the need for precise alignment of conventional lenses cause wave front aberrations that impact the performance of optical systems. These aforementioned limitations affect the uniformity of the intensity distribution and the intercept factor of lenses. Here, we experimentally demonstrate an integrable planar dielectric cylindrical lens made of titanium dioxide for uniform line focusing and discuss the sensitivity of its performance to fabrication imperfections originating from non-ideal geometrical parameters. The lens has a numerical aperture of 0.247, an intercept factor of 0.85, and an efficiency of 79% at 800 nm.

Integration of Nanomaterials into Three-Dimensional Vertical Architectures.

A novel layer-by-layer three-dimensional (3D) architecture allowing one to expand device fabrication in the vertical direction and integrating functional nanomaterials is presented by emulating civil engineering. The architecture uses SU-8 pillars as structural columns, which support multiple horizontal suspended thin films. The films then serve as platforms for the integration of nanomaterials and nanodevices. Multiple graphene layers suspended across SU-8 pillars with precise control on their vertical spacing are demonstrated. In addition to graphene, silicon nitride films that offer high strength yield and thickness control are also presented. Metallic microstructures, plasmonic nanostructures, semiconducting quantum dots, and monolayer graphene on the suspended films are achieved to prove the capability of integrating functional nanomaterials. This work provides the potential to integrate highly compact micro/nanoscale devices at different vertical levels with high surface density, which allows for more capabilities and functionalities in a single device.

On the design of random metasurface based devices.

Metasurfaces are generally designed by placing scatterers in periodic or pseudo-periodic grids. We propose and discuss design rules for functional metasurfaces with randomly placed anisotropic elements that randomly sample a well-defined phase function. By analyzing the focusing performance of random metasurface lenses as a function of their density and the density of the phase-maps used to design them, we find that the performance of 1D metasurfaces is mostly governed by their density while 2D metasurfaces strongly depend on both the density and the near-field coupling configuration of the surface. The proposed approach is used to design all-polarization random metalenses at near infrared frequencies. Challenges, as well as opportunities of random metasurfaces compared to periodic ones are discussed. Our results pave the way to new approaches in the design of nanophotonic structures and devices from lenses to solar energy concentrators.

Local phase method for designing and optimizing metasurface devices.

Metasurfaces have attracted significant attention due to their novel designs for flat optics. However, the approach usually used to engineer metasurface devices assumes that neighboring elements are identical, by extracting the phase information from simulations with periodic boundaries, or that near-field coupling between particles is negligible, by extracting the phase from single particle simulations. This is not the case most of the time and the approach thus prevents the optimization of devices that operate away from their optimum. Here, we propose a versatile numerical method to obtain the phase of each element within the metasurface (meta-atoms) while accounting for near-field coupling. Quantifying the phase error of each element of the metasurfaces with the proposed local phase method paves the way to the design of highly efficient metasurface devices including, but not limited to, deflectors, high numerical aperture metasurface concentrators, lenses, cloaks, and modulators.

Nonreciprocal lasing in topological cavities of arbitrary geometries.

Resonant cavities are essential building blocks governing many wave-based phenomena, but their geometry and reciprocity fundamentally limit the integration of optical devices. We report, at telecommunication wavelengths, geometry-independent and integrated nonreciprocal topological cavities that couple stimulated emission from one-way photonic edge states to a selected waveguide output with an isolation ratio in excess of 10 decibels. Nonreciprocity originates from unidirectional edge states at the boundary between photonic structures with distinct topological invariants. Our experimental demonstration of lasing from topological cavities provides the opportunity to develop complex topological circuitry of arbitrary geometries for the integrated and robust generation and transport of photons in classical and quantum regimes.

Hybridized metamaterial platform for nano-scale sensing.

Plasmonic/metamaterial sensors are being investigated for their high sensitivity, fast response time, and high accuracy. We propose, characterize and experimentally realize subwavelength bilayer metamaterial sensors operating in the near-infrared domain. We measure the figure-of-merit (FOM) and the bulk sensitivity (S) of the two fundamental hybridized modes and demonstrate both numerically and experimentally that the magnetic dipolar mode, degenerate with the electric quadrupolar mode, has higher sensitivity to a variation of the refractive index compared to the electric dipolar mode. In addition, the hybridized system exhibits a four fold increase in the FOM compared to a standard dipolar plasmonic system.

From parabolic-trough to metasurface-concentrator: assessing focusing in the wave-optics limit.

Metasurfaces are promising tools toward novel designs for flat optics applications. As such, their quality and tolerance to fabrication imperfections need to be evaluated with specific tools. However, most such tools rely on the geometrical optics approximation and are not straightforwardly applicable to metasurfaces. In this Letter, we introduce and evaluate for metasurfaces parameters such as intercept factor and slope error usually defined for solar concentrators in the realm of ray-optics. After proposing definitions valid in physical optics, we put forward an approach to calculate them. As examples, we design three different concentrators based on three specific unit cells and assess them numerically. The concept allows for comparison of the efficiency of the metasurfaces and their sensitivities to fabrication imperfections and will be critical for practical systems implementation.