ABSTRACT
A method for accessing pyrazole-containing helicene-like molecules from easily accessible NOBIN derivatives was developed. The reaction proceeded efficiently via diazonium salt intermediates, which provided a series of helicene-like molecular products in yields of 77%-89% regardless of their steric and electronic natures. The photophysical properties of the products were investigated. The 3,3'-disubstituted molecules showed a characteristic blue shift in their emission spectra. Product derivatizations were conducted, and interesting reactivities toward nucleophiles were observed.
ABSTRACT
Liquid crystal nanocapsules (LC-Nanocapsules) were prepared by miniemulsion polymerization of the oil-in-water emulsion monomer droplets dissolving the liquid crystal (LC) compounds. In order to establish the preparation conditions of LC-Nanocapsules exhibiting the liquid crystallinity, the effects of the capsule wall-forming monomers and the crosslinking agent concentration on the capsule structure were investigated in detail. The monodisperse colloidal products covered with the robust polymer shell wall was successfully prepared by the polymerization of the emulsion monomer droplets obtained through the phase inversion temperature emulsification technique using the amphiphilic block copolymer as an emulsifier. The endothermic peak was observed at the nematic-isotropic phase transition temperature (TNI) of the LC in the differential scanning calorimetry diagram of LC-Nanocapsules. The bright- and dark-field images of the dried thin films of LC-Nanocapsules spread on a glass substrate were found to appear repeatedly by the temperature change below and above TNI by polarized optical microscopic analysis. These results revealed that the LC-Nanocapsules with a complete engulfing morphology were successfully formed by the spontaneous coacervation phenomena between the crosslinked polymer and the LC with a progression of the polymerization, as theoretically predicted from the viewpoint of the spreading coefficients.
ABSTRACT
We have developed a new photon upconversion (UC) system utilizing a new amphiphilic sensitizer 1a that comprises a hydrophilic ruthenium complex and a lipophilic bisanthracene appendage. At concentrations higher than 5 µM in toluene, the sensitizer 1a formed a reverse micellar assembly which facilitated the triplet sensitization of 9,10-diphenylanthracene (DPA) more efficiently than homogeneously dispersed solutions to enhance the UC efficiency up to 38.2%. The Stern-Volmer analyses revealed the stepwise triplet-triplet energy transfers (TTET): (1) intramicellar energy transfer from the ruthenium core to the bisanthracene surface and (2) diffusion-dependent energy transfer from the surface to DPA. On these bases, it can be assumed that the reverse micellar assemblies accelerate the former TTET process to enhance the UC efficiency.
ABSTRACT
Photochromic materials have attracted considerable attention for their practical applications in optoelectronic devices. In this study, we developed the photochromic liquid core nanocapsules by polymerization of oil-in-water (O/W) nanoemulsion monomer droplets on the basis of Hansen solubility parameters. The thermoresponsive amphiphilic block copolymers (POEGMAm-b-PStn and POEGMAm-b-PMMAn) were synthesized by sequential reversible addition fragmentation chain transfer (RAFT) polymerization of hydrophilic oligo(ethylene glycol) methyl ether methacrylate and hydrophobic styrene or MMA. The O/W nanoemulsion methyl methacrylate (MMA) droplets, dissolving dipropylene glycol methyl-n-propyl ether (DPMNP) and (E)-3-(adamantan-2-ylidene)-4-[1-(2,5-dimethyl-3-furyl) ethylidene]dihydro-2,5furandione (Aberchrome 670) as a core liquid and a photochromic dye, respectively, were obtained through the phase inversion temperature emulsification technique using POEGMAm-b-PStn as a surfactant. As theoretically predicted in terms of the spreading coefficients, the DPMNP solution of Aberchrome 670 was successfully encapsulated by coacervation of the crosslinked PMMA condensed phase. Aberchrome 670 dissolved in a liquid core was found to photoisomerize twice as fast as that dispersed in the solid polymer matrices.
ABSTRACT
Unlike classical covalent polymers, one-dimensionally (1D) elongated supramolecular polymers (SPs) can be encoded with high degrees of internal order by the cooperative aggregation of molecular subunits, which endows these SPs with extraordinary properties and functions. However, this internal order has not yet been exploited to generate and dynamically control well-defined higher-order (secondary) conformations of the SP backbone, which may induce functionality that is comparable to protein folding/unfolding. Herein, we report light-induced conformational changes of SPs based on the 1D exotic stacking of hydrogen-bonded azobenzene hexamers. The stacking causes a unique internal order that leads to spontaneous curvature, which allows accessing conformations that range from randomly folded to helically folded coils. The reversible photoisomerization of the azobenzene moiety destroys or recovers the curvature of the main chain, which demonstrates external control over the SP conformation that may ultimately lead to biological functions.
ABSTRACT
The design of molecular systems with high-fidelity self-assembly pathways that include several levels of hierarchy is of primary importance for the understanding of structure-function relationships, as well as for controlling the functionality of organic materials. Reported herein is a high-fidelity self-assembly system that comprises two hydrogen-bonding molecular semiconductors with regioisomerically attached short alkyl chains. Despite the availability of both discrete cyclic and polymeric linear hydrogen-bonding motifs, the two regioisomers select one of the two motifs in homogeneous solution as well as at the 2D-confined liquid-solid interface. This selectivity arises from the high directionality of the involved hydrogen-bonding interactions, which renders rerouting to other self-assembly pathways difficult. In thin films and in the bulk, the resulting hydrogen-bonded assemblies further organize into the expected columnar and lamellar higher-order architectures via solution processing. The contrasting organized structures of these regioisomers are reflected in their notably different miscibility with soluble fullerene derivatives in the solid state. Thus, electron donor-acceptor blend films deliver a distinctly different photovoltaic performance, despite their virtually identical intrinsic optoelectronic properties. Currently, we attribute this high-fidelity control via self-assembly pathways to the molecular design of these supramolecular semiconductors, which lacks structure-determining long aliphatic chains.
ABSTRACT
Intricately designed π-conjugated molecules containing interactive groups can be used to generate supramolecular polymers with outstanding structural and functional properties. To construct such supramolecular polymers, the non-covalent synthesis of supermacrocyclic monomers from relatively simple molecules represents an attractive strategy, although this has been rarely exploited. Here, we report the supramolecular polymerization of two barbiturate-naphthalene derivatives that circularly hexamerize by hydrogen bonding. The two molecules contain an aliphatic "wedge" unit with either an ether or ester linkage. This subtle difference is amplified into distinct features both in terms of the morphology of the supramolecular polymers and the polymerization process. The degrees of conformational freedom of the wedge unit determine the stacking of the supermacrocycles, as is evident from 2D X-ray diffraction analyses on the aligned fibers. The differences in stacking impart the supramolecular polymer fibers with different morphological features (cylindrical or helical), which are reflected in the properties of concentrated solutions (suspension or gel). The degrees of conformational freedom of the wedge unit also affect the polymerization kinetics, in which the more flexible ether linkage induces pathway complexity by the formation of off-pathway aggregates.
ABSTRACT
The self-assembly of two regioisomeric hydrogen-bonding naphthalenes was studied in mixed states in different polarity solvents. The regioisomers co-assemble to form heteromeric rosettes in chloroform. Upon injecting this solution into methylcyclohexane the heteromeric rosettes kinetically form amorphous aggregates, which over time differentiate into thermodynamically stable distinct nanostructures through self-sorting.
ABSTRACT
The supramolecular design of photochromic molecules has produced various smart molecular assemblies that can switch their structures and/or functions in response to light stimuli. However, most of these assemblies require large structural changes of the photochromic molecules for an efficient conversion of assembled states, which often suppresses the photoreactivity within the self-assemblies. Here we report molecular assemblies, based on a photo-cross-linkable chromophoric dyad, in which a small amount of ultraviolet-generated photochemical product can guide the entire system into different assembly processes. In apolar solution, the intact dyad self-assembles into right-handed superhelical fibrils. On ultraviolet-irradiation of these fibrils, an effective photoreaction affords a sole photo-cross-linked product. When right-handed helical fibrils, containing a minor amount of the photoproduct, are thermally reconstructed, the intact molecule and the photoproduct undergo a co-assembly process that furnishes superhelical fibrils with different molecular packing structures. This molecular design principle should afford new paradigms for smart molecular assemblies.
ABSTRACT
Supramolecular rosettes of oligothiophenes that do not bear long aliphatic tails have been designed as semiconducting nanomaterials for solution-processable bulk heterojunction solar cells. The rosettes consist of six barbiturated thienyl[oligo(hexylthiophene)] units (Bar-T-hTn ; n=3,4,5) aggregated by multiple hydrogen bonds, which have been directly visualized by scanning tunneling microscopy (STM) at a solid-liquid interface. (1) Hâ NMR spectroscopy in [D8 ]toluene showed that Bar-T-hTn exists as a mixture of monomers and small hydrogen-bonded aggregates. Hierarchical organization of the hydrogen-bonded aggregates took place through π-π stacking interactions upon casting their toluene solutions, resulting in the growth of highly ordered nanorods whose widths are consistent with the diameters of the rosettes. The nanorods could be generated in the presence of soluble fullerene derivatives via solution casting or the annealing of the resulting thin films. The solar cells fabricated based on these bulk heterojunction films showed power conversion efficiencies of 1-3 %, which are far higher than those of the non-hydrogen-bonded reference oligothiophene and the derivative that possesses long aliphatic tails.
Subject(s)
Electric Power Supplies , Nanotubes/chemistry , Semiconductors , Thiophenes/chemistry , Electric Capacitance , Solar Energy , Toluene/chemistryABSTRACT
π-Conjugated compounds that exhibit tunable luminescence in the solid state under external mechanical stimuli have potential applications in sensors and imaging devices. However, no rational designs have been proposed that impart these mechano-responsive luminescent properties to π-conjugated compounds. Here we demonstrate a strategy for mechano-responsive luminescent materials by imparting amphiphilic and dipolar characteristics to a luminescent π-conjugated system. The oligo(p-phenylenevinylene) luminophore with a didodecylamino group at one end and a tri(ethylene glycol) ester group at the other end yields segregated solid structures by separately aggregating its hydrophobic and hydrophilic moieties. The segregated structures force the molecules to align in the same direction, thereby generating a conflict between the side-chain aggregation and dipolar stabilization of the π-system. Consequently, these metastable solid structures can be transformed through mechanical stimulation to a more stable structure, from a π-π stacked aggregate to a liquid crystal and further to a crystalline phase with variable luminescence.
ABSTRACT
Diarylethenes (DAEs) have rarely been used in the design of photoresponsive supramolecular assemblies with a well-defined morphology transition owing to rather small structural changes upon photoisomerization. A supramolecular design based on the parallel conformation of DAEs enables the construction of photoresponsive dye assemblies that undergo remarkable nanomorphology transitions. The cooperative stacking of perylene bisimide (PBI) dyes was used to stabilize the parallel conformer of DAE through complementary hydrogen bonds. Atomic force microscopy, UV/Vis spectroscopy, and molecular modeling revealed that our DAE and PBI building blocks coassembled in nonpolar solvent to form well-defined helical nanofibers featuring J-type dimers of PBI dyes. Upon irradiating the coassembly solution with UV and visible light in turn, a reversible morphology change between nanofibers and nanoparticles was observed. This system involves the generation of a new self-assembly pathway by means of photocontrol.
ABSTRACT
A cholesterol-functionalized gold(i)-isocyanide complex exhibiting mechanochromic luminescence properties was self-organized into distinct microscopic structures with different photoluminescence properties through vapor-diffusion of a poor solvent into its dichloromethane solution. The structure-optical property relationship of these microstructures could be related to the mechanically induced phase transition.
ABSTRACT
Iridium complexes are one of the most important materials for fabrication of organic light emitting diodes (OLEDs). There are difficulties in the preparation of blue phosphorescent complexes with respect to chromaticity, emission efficiency, and stability of the material, compared with green and red phosphorescent complexes. Control of the frontier orbital energy level (HOMO-LUMO) is the sole method to achieve better blue phosphorescent iridium complexes by appropriate ligand selection and the introduction of adequate substituents. Homoleptic and heteroleptic iridium(III) tris(phenylimidazolinate) complexes were synthesized, and the effect of the substituents on their nature in the excited state was examined. Density functional theory calculation showed that the imidazolinato complexes have the HOMO localized at the iridium d- and phenyl π-orbitals. The LUMO is also localized on the phenyl moiety with a much higher population than HOMO. This LUMO is quite different from other complexes, such as iridium(III) tris(phenylpyridinate) and tris(phenylpyrazolinate) complexes. Therefore, substitution with π-electron donating groups and electron withdrawing groups induces blue and red spectral shifts, respectively, which is the reverse shift exhibited by other complexes. The ancillary ligand (acetylacetone) acts as a path for nonradiative deactivation in the blue phosphorescent complexes.
ABSTRACT
Organogels: Dimerization of perylene bisimide dyes through an oligomethylene linker enabled the facile control over columnar and lamellar self-organized architectures by an odd/even effect with respect to the number of methylene groups. The difference in the self-organized architectures was shown to have an impact on their material morphologies, as well as charge-carrier mobilities (see scheme).
ABSTRACT
Bismelamines end-functionalized with oligo(p-phenylenevinylene) self-aggregate in nonpolar solvent to form short nanorods by helical π-π stacking. This inherent self-aggregation can be guided to a supramolecular polymerization pathway by complexing with a cyanurate, leading to gel-forming elongated nanotapes lacking the helical sense of the π-conjugated moieties.
ABSTRACT
We report a precise control over the hierarchy levels in the outstanding self-organization process shown by chiral azobenzene dimer 1. This compound forms uniform toroidal nanostructures that can hierarchically organize into chiral nanotubes under the control by temperature, concentration, or light. The nanotubes further organized into supercoiled fibrils, which finally intertwined to form double helices with one-handed helical sense.