Comparison of patient positions without traction table for proximal femoral nailing: Supine, semilithotomy and lateral decubitus positions.

BACKGROUND: Femur intertrochanteric fractures are performed commonly in a supine position with a traction table. There is a challenge in obtaining traction tables, especially in low- and middle-income countries. However, there is still a debate on which position should be preferred if the traction table cannot be obtained. METHODS: A total of 123 patients who were treated for femur intertrochanteric fracture (AO/OTA A1 or A2) using cephalomedullary nail (CN) were retrospectively analyzed. All three positions without traction table (supine:25 patients, semilithotomy:36 patients and lateral decubitus:62 patients) were compared according to preparation time, surgical time, Tip-Apex distance (TAD), zones of lag screw placement, collodiaphyseal angle (CDA), CDA difference (∆ CDA), postoperative posterior sag, medial cortical support and Baumgardner reduction quality criteria. RESULTS: The preparation time was longer in the semilithotomy group, and surgery time was longer in the supine position group. There was no difference according to total time, surgical time, TAD, CDA difference (∆ CDA), postoperative posterior sag, medial cortical support and Baumgardner reduction quality criteria. Target lag screw placement is superior in supine and semilithotomy group than lateral decubitus. CONCLUSION: This study concluded that there was a difference in preparation time, surgery time and optimal lag screw placement in the lateral plane between groups. The surgeon may prefer all three methods according to patient benefit and surgeon familiarity.

Single versus double plate fixation of humeral shaft nonunion.

INTRODUCTION: Humeral shaft fractures are common fractures of the diaphysis of the humerus. The aim of this study was to evaluate factors affecting the clinical outcomes of humeral nonunions surgically treated with open reduction and single- versus double-plate fixation with grafting. MATERIALS AND METHODS: A total of 31 patients with nonunion treated with single- or double-plate screw fixation with bone grafting were retrospectively analysed. The patients were divided into two groups according to the treatment method as Group 1 (single-plate, n = 14) and Group 2 (double-plate, n = 17). Data including demographic and clinical characteristics of the patients, initial and final treatment, type of nonunion and localisation, graft use, shortening, follow-up, time to union, Quick Disabilities of the Arm, Shoulder and Hand (Quick-DASH) scores, and patient-reported cosmetic outcomes were recorded. RESULTS: Of the patients, eight were males, and 23 were females, with a mean age of 47.6 ± 15.8 (range, 20-86) years. Initial treatment was conservative treatment (Sarmiento brace) in seven patients, plate fixation in 22 patients, and intramedullary nailing in two patients. The mean follow-up was 31.0 ± 16.9 months in Group 1 and 25.4 ± 15.6 months in Group 2. There was one nonunion in Group 1 and three in Group 2. There were no significant differences in the union rate and time to union (p = 0.378 and p = 0.262, respectively). The mean Quick-DASH scores and cosmetic results were similar between the groups (p = 0.423 and p = 0.165, respectively). Radial nerve palsy developed in three patients in Group 2, and all these patients recovered completely during follow-up. CONCLUSIONS: Although the double-plate fixation technique has similar clinical, radiological, and functional results to single-plate fixation, it is a more invasive and expensive technique with a longer operation time. Therefore, it should not be used as the first-line treatment option for all humeral shaft nonunion. Nevertheless, the double-plate technique may be preferred to achieve in cases requiring high stability, such as hypertrophic nonunion, osteopenia and comminuted fractures.

A novel patella fracture fixation technique: finite element analysis.

INTRODUCTION: Patella fractures account for approximately 1% of all bone fractures. The tension band wiring technique has been used in surgical treatment. However, there is no clear information about the location of the K-wires in sagittal plane. Thus, a transverse fracture line was created in the patella finite element model and fixed with Kirchner (k) wires and cerclage at different angles and compared with two different standard tension band models. MATERIALS AND METHODS: A total of 10 finite element models were created to study AO/OTA 34-C1 patella fractures. Two models used the classical tension band method with either circumferential or 8-shaped cerclage wire. The other 8 models used K-wires placed at 45° or 60°, either alone or combination with cerclage wire. A force of 200 N, 400 N, and 800 N were applied at 45° knee angle and the resulting data fracture line opening, surface pressure and stress in the implants were analyzed through finite element analysis. RESULTS: When all the results are considered, it was determined that the K-wires 60° crossing at the fracture line and with cerclage modeling was superior to the other models. The diagonal placement of the K-wires with cerclage (could be 45° or 60° medium) was superior to the reference models. CONCLUSIONS: This study has shown that the new fixation method we propose could come to the fore as an alternative method to be used successfully in transverse patella fractures and lower complications. In transverse patellar fractures, the use of K-wires crossed at 60° may be a good alternative to the standard method.

An AI based classifier model for lateral pillar classification of Legg-Calve-Perthes.

We intended to compare the doctors with a convolutional neural network (CNN) that we had trained using our own unique method for the Lateral Pillar Classification (LPC) of Legg-Calve-Perthes Disease (LCPD). Thousands of training data sets are frequently required for artificial intelligence (AI) applications in medicine. Since we did not have enough real patient radiographs to train a CNN, we devised a novel method to obtain them. We trained the CNN model with the data we created by modifying the normal hip radiographs. No real patient radiographs were ever used during the training phase. We tested the CNN model on 81 hips with LCPD. Firstly, we detected the interobserver reliability of the whole system and then the reliability of CNN alone. Second, the consensus list was used to compare the results of 11 doctors and the CNN model. Percentage agreement and interobserver analysis revealed that CNN had good reliability (ICC = 0.868). CNN has achieved a 76.54% classification performance and outperformed 9 out of 11 doctors. The CNN, which we trained with the aforementioned method, can now provide better results than doctors. In the future, as training data evolves and improves, we anticipate that AI will perform significantly better than physicians.

Destructive disasters, trauma, crush syndrome, and beyond.

Orthopedic injuries, especially fractures of long bones as well as multiple fractures and comminuted fractures, are very common after destructive disasters (e.g., earthquakes, wars, and hurricanes). Another frequent problem is traumatic rhabdomyolysis, which may result in crush syndrome, the second most frequent cause of death after direct traumatic impact following earthquakes. To improve outcomes, interventions should be initiated even before extrication of the victims, which include maintenance of airway patency and spine stabilization, stopping traumatic bleeding by any means, and initiating fluid resuscitation. On-site amputations have been extensively debated to liberate the victims if the release of trapped limbs is impossible. Early after the rescue, a primary survey and triage are performed, a fluid resuscitation policy is planned, complications are treated, the wounds are decontaminated, and the victim is transported to specialized hospitals. A triage and primary survey are also performed at admission to the hospitals, which are followed by a secondary survey, physical, laboratory, and imaging examinations. Washing and cleaning of the soft-tissue injuries and debridement in open, necrotic wounds are vital. Applications of fasciotomies and amputations are controversial since they are associated with both benefits and serious complications; therefore, clear indications should be defined. Crush syndrome has been described as the presence of systemic manifestations following traumatic rhabdomyolysis, the most important component of which is acute kidney injury that may contribute to fatal hyperkalemia. The overall mortality rate is around 20% in crushed patients, which underlines the importance of prevention. Treatment includes maintaining of fluid electrolyte and acid-base balance, application of dialysis, and also prevention and treatment of complications. The principles and practices in disaster medicine may differ from those applied in routine practice; therefore, organizing repeated training courses may be helpful to provide the most effective healthcare and to save as many lives as possible after mass disasters.

A rare cause of foot pain in an adolescent due to os paracuneiforme: a case report and review of the literature.

Os paracuneiforme is an extremely rare accessory ossicle located at the medial aspect of the medial cuneiform bone. Although foot pain secondary to accessory ossicles is well known, symptomatic os paracuneiforme that requires surgical excision is rarely reported in the current literature. Herein, a 12-year-old boy with symptomatic os paracuneiforme is presented, and its clinical and imaging findings as well as the treatment are discussed.

Is There a Role of Meniscal Morphology in the Risk of Noncontact Anterior Cruciate Ligament Rupture? A Case-Control Study.

The purpose of this study was to identify the anatomical risk factors and determine the role of meniscal morphology in noncontact anterior cruciate ligament (ACL) rupture. A total of 126 patients (63 with noncontact ACL rupture and 63 age- and sex-matched controls) with intact menisci were included in this retrospective case-control study. On knee magnetic resonance imaging (MRI), meniscal morphometry (anterior, corpus, and posterior heights and widths of each meniscus), tibial slope (medial and lateral separately), notch width index, roof inclination angle, anteromedial bony ridge, tibial eminence area, and Q-angle measurements were assessed. The data were analyzed using multiple regression analyses to identify independent risk factors associated with ACL rupture. Using a univariate analysis, medial and lateral menisci anterior horn heights (p < 0.001; p < 0.003), medial and lateral menisci posterior horn heights (p < 0.001; p < 0.001), lateral meniscus corpus width (p < 0.004), and notch width index (p < 0.001) were significantly higher in the control group. Lateral tibial slope (p < 0.001) and anteromedial bony ridge thickness (p < 0.001) were significantly higher in the ACL rupture group. Multivariate analysis revealed that decreased medial meniscus posterior horn height (odds ratio [OR]: 0.242; p < 0.001), increased lateral meniscus corpus width (OR: 2.118; p < 0.002), increased lateral tibial slope (OR: 1.95; p < 0.001), and decreased notch width index (OR: 0.071; p = 0.046) were independent risk factors for ACL rupture. Notch stenosis, increased lateral tibial slope, decreased medial meniscus posterior horn height, and increased lateral meniscus corpus width are independent anatomical risk factors for ACL rupture. Meniscal morphological variations also play a role in ACL injury. This is a Level III, retrospective case-control study.

May minimally invasive plate osteosynthesis be an alternative to intramedullary nailing in selected spiral oblique and spiral wedge tibial shaft fractures?

OBJECTIVES: This study aims to compare intramedullary nailing (IMN) and minimally invasive plate osteosynthesis (MIPO) treatment methods in Arbeitsgemeinschaft für Osteosynthesefragen (AO) 42A1 & 42B1 selected tibial shaft fractures. PATIENTS AND METHODS: Fifty-one patients (31 males, 20 females; mean age 43.5±14.2 years; range, 18 to 81 years) operated for AO 42A1 or AO 42B1 tibial shaft fractures between January 2006 and January 2012 were retrospectively evaluated. Twenty-three of these patients were treated with MIPO and 28 with IMN. Patients were compared in terms of union time, return to work, infection, malunion, hospital stay, and sixth month and two-year Lower Extremity Functional Scale (LEFS) values. RESULTS: There was no difference between the MIPO and IMN groups in terms of demographic data, etiology, and fracture patterns. The mean follow-up time was 37.8±8.8 months in MIPO group and 35.9±8.7 months in IMN group. Union time (p=0.575), return to work (p=0.155), infection (p=0.643), malunion (p=0.471), and hospital stay (p=0.538) were all similar between groups. Although the LEFS value was higher in IMN group in sixth month (p=0.026), the two-year LEFS value was similar between groups (p=0.085). CONCLUSION: Results of the study showed that both treatment methods are similar regarding clinical and functional outcomes. According to these results, MIPO can be recommended as an alternative to IMN in tibial shaft fractures formed as spiral oblique and spiral wedge.

Magnesium Bioabsorbable Screw Fixation of Radial Styloid Fractures: Case Report.

Background Several types of fixation materials may be used for the radial styloid fractures such as Kirschner wire fixation, screw fixation, volar plate fixation, and fragment-specific radial buttress plate fixation. However, each of these fixation techniques has certain complications usually related to either the surgical dissection or the application of fixation and symptomatic permanent hardware. Implant removal secondary to irritation of prominent screw heads or bulky plates is not uncommon after radial styloid fracture fixation. Case Description Herein, two patients with an isolated radial styloid fracture who were treated with bioabsorbable magnesium (alloy: MgYREZr) screws are presented. In both patients, the fracture union was achieved without any complication and need for implant removal. Literature Review This is the first report on the use of magnesium screws for this indication. Clinical Relevance Magnesium bioabsorbable compression screw fixation may be an alternative solution that eliminates removal operations due to symptomatic hardware in radial styloid fractures.

Single versus double screw fixation for the treatment of scaphoid waist fractures: Finite element analysis and preliminary clinical results in scaphoid nonunion.

OBJECTIVES: This study aims to compare the single versus double screw fixation of scaphoid waist fractures using finite element analysis, and to present the preliminary clinical results of double screw fixation in a consecutive series of patients with scaphoid nonunion. PATIENTS AND METHODS: A transverse scaphoid waist fracture (Herbert type B2) model was fixed with either single or double cannulated compression screws. Displacement and rotation of the fragments were performed using three-dimensional finite element analysis in three different wrist positions. A retrospective review was performed on 13 male patients (mean age 31.6±12.8 years; range, 17 to 64 years) who underwent double screw fixation for an established scaphoid nonunion in our clinic between January 2015 and December 2017. Assessment of union was established with serial plain radiographs in eight patients and with wrist computed tomography in five patients. Clinical evaluation was performed using the Mayo wrist score and visual analog scale (VAS). RESULTS: In all wrist positions, the displacement of the fracture gap in double screw fixation in all planes (x, y, and z) was less than in single screw fixation. Similarly, rotation of the fracture fragments around the longitudinal axis of the scaphoid was lower in double screw fixation. Complete union was obtained in all patients. The mean time to union was 5±0.75 months (range, 4 to 6 months). The mean VAS was 0.8±0.9 (range, 0 to 3). Mayo wrist score was 91±6.9 (range, 80 to 100) at the final follow-up. CONCLUSION: Double-screw fixation technique may be a solution to reduce the rate of scaphoid nonunion in unstable type B2 scaphoid fractures or nonunion.

Comparison of magnesium versus titanium screw fixation for biplane chevron medial malleolar osteotomy in the treatment of osteochondral lesions of the talus.

PURPOSE: This retrospective study aimed to compare the clinical and radiological outcomes of patients who underwent biplane chevron medial malleolar osteotomy (MMO) for osteochondral lesions of the talus (OLT), fixed with either magnesium (Mg) or titanium (Ti) screws. METHODS: A total of 22 patients (12 male and 10 female) with a mean age of 40.6 ± 12.5 years (range 18-56 years) who underwent MMO for OLT treatment were included in this retrospective study. Of the 22 patients, MMO was fixed with bioabsorbable Mg screws (Alloy: MgYREZr) in 11 patients, and in the remaining 11 patients (one bilateral) MMO was fixed with Ti screws. All patients were followed up for at least 1 year with a mean of 20.7 ± 8.9 months (range 12-49 months). The American Orthopedic Foot and Ankle Society (AOFAS) scale and the visual analog scale (VAS) were used to evaluate the clinical results. Union of the osteotomy, postoperative displacement and all other complications were followed and analyzed. RESULTS: An improvement in the AOFAS scale and VAS points were recorded in both groups with no statistically significant difference between the groups (p 0.079 and 0.107, respectively). Complete union of the osteotomy was obtained in all patients. One patient in the Ti group required implant removal due to pain and irritation. There were no other significant complications in either group. CONCLUSIONS: The results of this study showed that bioabsorbable Mg compression screws have similar therapeutic efficacy to Ti screws in respect of functional and radiological outcomes in MMO fixation. Bioabsorbable Mg screw is an alternative fixation material which can be safely used for MMO in ankle surgery. LEVEL OF EVIDENCE: Level IV, retrospective case series.

Investigation of Lateral Epicondylitis in Neurosurgeons.

AIM: To investigate the frequency of lateral epicondylitis (LE), depending on the tasks performed by neurosurgeons, and to determine whether it can be accepted as an occupational disease depending on its frequency. MATERIAL AND METHODS: All neurosurgery specialists enrolled in the Turkish Neurosurgical Society website were prospectively included. A questionnaire form was shared, and the subsequent responses were recorded. Those who provided incomplete responses were excluded from the study. The respondents diagnosed with LE were recorded. Exclusion criteria were investigated on complaints of pain. They were examined by an orthopedics and traumatology specialist with application of Thomsen test and necessary maneuvers. RESULTS: The study was conducted with 216 neurosurgeons. Those with more than 30 operations per month (p=0.002), those with a specialization duration of 10-20 years and > 20 years (p=0.001), and those who specialized in spinal surgery (p=0.014) had a significantly higher prevalence of epicondylitis. Considering the relationship between lumbar/thoracic pedicle screw insertion and epicondylitis, the epicondylitis diagnosis rate was significantly higher in physicians inserting 20â€"60 screws per month than those inserting < 20 screws (p=0.009). CONCLUSION: LE frequently occurs in neurosurgeons who regularly perform spinal instrumentation and appears to be an occupational disease. However, data obtained during the current study should be combined with findings from case-control studies of neurosurgeons.

Comparison of Bioabsorbable Magnesium versus Titanium Screw Fixation for Modified Distal Chevron Osteotomy in Hallux Valgus.

OBJECTIVE: The purpose of this retrospective study was to compare the clinical and radiological results of magnesium versus titanium screw fixation for modified distal chevron osteotomy in hallux valgus (HV). MATERIALS AND METHODS: A total of 31 patients who underwent modified distal chevron osteotomy for HV deformity between 2014 and 2017 were reviewed retrospectively. Headless magnesium (Mg) compression screw fixation was applied in 16 patients (17 feet) and headless titanium (Ti) compression screw in 15 patients (17 feet). Patients were followed up for at least 12 months with a mean of 19.0 ± 6.8 months in the Mg screw group and 16.2 ± 6.19 in the Ti screw group, respectively (p: 0.234). Clinical results were evaluated using the American Orthopedic Foot and Ankle Society Hallux metatarsophalangeal-interphalangeal (AOFAS-MTP-IP) scale and a visual analogue scale (VAS). The hallux valgus angle (HVA) and intermetatarsal angle (IMA) were measured before and after surgery. Time to osteotomy union and any complications were recorded and compared between the groups. RESULTS: An improvement in the AOFAS-MTP-IP scale and VAS points were recorded in both groups with no statistically significant difference between the groups (p: 0.764 and 0.535, resp.). At the final follow-up examination, HVA and IMA were similar (p: 0.226 and 0.712, resp.). There was no significant loss of correction between the early and final radiographs in respect of HVA and IMA in both groups (p: 0.321 and p: 0.067). Full union of the osteotomy was obtained in all patients. Prolonged (1.5 months) swelling and mild hyperemia around the surgical incision were observed in 1 patient in the Mg group but there was a good response to physical and medical therapy, and the complaints were completely resolved. There were no other significant complications in either group. CONCLUSION: The results of this study showed that bioabsorbable Mg compression screw fixation has similar therapeutic efficacy to Ti screw fixation in respect of functional and radiological outcomes. Bioabsorbable Mg screw is an alternative fixation material that can be safely used for modified distal chevron osteotomy in HV surgery.

Comparison of volar versus dorsal screw fixation for scaphoid waist fractures: A finite element analysis.

PURPOSE: Scaphoid waist fractures may be fixed through volar or dorsal screw fixation. However, there is no consensus on which surgical fixation method should be performed. The purpose of this study was to compare volar versus dorsal screw fixation of scaphoid waist fractures under physiological loading conditions utilizing finite element analysis. METHODS: A transverse scaphoid waist fracture (Herbert type B2) model was fixed with a headless cannulated compression screw using either a volar or dorsal approach. Displacement and rotation of the fragments and stress analysis on the scaphoid bone and screw were analyzed in the models using 3-D finite element analysis in three different wrist positions; total extension (TE), neutral (N) and total flexion (TF). RESULTS: Displacement of the fracture gap in volar fixation in all planes (x, y, z) was less than in dorsal fixation in the TF and N positions. Furthermore, rotational stability was stronger in volar fixation in all planes and wrist positions. von Mises stress values were concentrated on the proximal fragment in all wrist positions. CONCLUSIONS: Although both volar and dorsal fixation techniques can be preferred in Herbert type B2 fractures, results of this finite element analysis suggest that centrally placed volar compression screw fixation may be biomechanically advantageous over dorsal screw fixation. LEVEL OF EVIDENCE: I.

Giant Cell Tumor of the Patellar Tendon Sheath: A Rare Case of Anterior Knee Pain.

Giant cell tumor of the tendon sheath (GCTTS) is a benign, proliferative lesion of the synovium of the joint, the bursa, and the tendon sheath. We report a case of intra-articular, localized GCTTS arising from the patellar tendon, which is a rare cause of anterior knee pain. The diagnosis may be delayed due to non-specific symptoms and normal plain radiographic findings. Magnetic resonance imaging (MRI) is diagnostic to detect the lesion, but several other clinical entities and lesions should be evaluated in the differential diagnosis. The treatment of choice is a total excision of the lesion without leaving residual tumor tissue, in order to reduce the risk of recurrence. We present a patient with GCTTS of the patellar tendon and discuss its clinical and radiographic characteristics, differential diagnosis, pathology, and treatment.

The effect of rotational deformity on patellofemoral parameters following the treatment of femoral shaft fracture.

OBJECTIVE: The purpose of this study was to investigate the effect of rotational deformities on patellofemoral alignment using the dynamic magnetic resonance imaging method on patients whose femur fractures were treated with intramedullary locking nails. METHODS: The dynamic patellofemoral magnetic resonance imaging results of 33 patients (5 females and 28 males) were reviewed. The mean age of the patients was 36.3 (range 19-61) years. The mean follow-up was 30.2 months (range 24-38). All the patients were given Kujala patellofemoral clinical evaluation scores at the latest follow-up. Those with less than 10° of rotational deformity in either direction were classified as Group A, those with more than a 10° of internal rotation deformity as Group B and more than a 10° of external rotation deformity as Group C. The three groups were then compared regarding to clinical scores. Patellofemoral parameters of operated and contralateral side were also compared in each group. RESULTS: There were 14 (42.4 %) patients in Group A, 12 (36.4 %) patients in Group B and 7 (21.2 %) patients in Group C. The mean patella score in Group C (74 ± 7.02) was significantly lower when compared with Group B (87.6 ± 9.9) and group A (90.6 ± 6.1) (p < 0.05). In Group C patients, medial patellar tilt was detected when compared with the intact side. There were no significant changes in patellofemoral position in either Group A or Group B. CONCLUSION: The results of this study revealed that more than 10° of external rotation deformity could cause a detoriation in the patellofemoral scores. Anatomic reduction of the fracture site should be performed as soon as possible and external rotational deformities should especially be avoided in order to prevent patellofemoral malalignment.

Factors affecting the closed reduction of diaphyseal fractures of the femur.

INTRODUCTION: This level II prospective study investigates patient and fracture-related factors likely to affect closed reduction time in the surgical treatment of femur fractures, and the effect these factors have on closed reduction time. PATIENTS AND METHODS: Seventy-nine diaphyseal femur fractures of 75 patients were included in the present study. All fractures were treated with indirect closed reduction by manual traction using antegrade nailing and static, locked, reamed intramedullary nails. The three variables considered to influence the duration of closed reduction, that is, the type of fracture, BMI, and the preoperative period (time from injury to surgery), were evaluated either separately or in a combination of two or three of the variables. Their influence on the closed reduction time was analyzed and evaluated. RESULTS: In this study according to the outcomes, a preoperative period ≤24 h had a significant effect in shortening the reduction time. The reduction time was not significantly affected by the type of fracture. The reduction time was prolonged in overweight patients, but the difference was not significant. When the three variables BMI, preoperative period, and fracture types were evaluated together, the common effect of these three variables was not significant. CONCLUSION: In conclusion, based on these results, we think that closed reduction should certainly be aimed for in femur fractures in which intramedullary nailing is planned. Also, early surgical intervention appears to have a beneficial effect on the success of closed reduction.

Unexpected injury of the orthopaedic surgeon: a case report of a hammer splinter.

Sharps injuries have become one of the most important occupational injuries and they are common during surgery, with rates between 1.7 and 6.9% of all surgical procedures. This case report, however, revealed an extremely rare and unexpected condition, which could not be prevented by the reasonable safety precautions against injury. Closed reduction and closed intramedullary fixation was planned for the patient with humeral shaft fracture. While advancing the nail by hammering a piece of metal detached. A short time following the commencement of the procedure, the surgeon who was performing the operation felt a sudden severe pain in the neck. A radio-opaque intensity in the cervical region was detected on X-rays. There was a piece of metal from the hammer. The risk encountered in the present case comprises a condition, the prevention of which is probably impossible with the frequently utilized preventive measures against injuries. For this reason, the operating room team and in particular, the surgeon, should be careful about possible expected injuries, as well as the unexpected ones. Sharps injuries continue to be a serious concern for all healthcare workers. In some studies however, reporting of sharps injuries by healthcare workers remains a problem with reporting levels cited as low as 15% and as high as 90% (Kerr H-L, Stewart N Ann R Coll Surg Engl 91:430-432, [6]). Guo et al. pointed out the most recent sharps injuries at work, and syringe needles was by far the most important items causing injuries, followed by glass products, suture needles, and intravenous catheters.