Colloidal Nanoparticles of High Entropy Materials: Capabilities, Challenges, and Opportunities in Synthesis and Characterization.

Materials referred to as "high entropy" contain a large number of elements randomly distributed on the lattice sites of a crystalline solid, such that a high configurational entropy is presumed to contribute significantly to their formation and stability. High temperatures are typically required to achieve entropy stabilization, which can make it challenging to synthesize colloidal nanoparticles of high entropy materials. Nonetheless, strategies are emerging for the synthesis of colloidal high entropy nanoparticles, which are of interest for their synergistic properties and unique catalytic functions that arise from the large number of constituent elements and their interactions. In this Perspective, we highlight the classes of materials that have been made as colloidal high entropy nanoparticles as well as insights into the synthetic methods and the pathways by which they form. We then discuss the concept of "high entropy" within the context of colloidal materials synthesized at much lower temperatures than are typically required for entropy to drive their formation. Next, we identify and address challenges and opportunities in the field of high entropy nanoparticle synthesis. We emphasize aspects of materials characterization that are especially important to consider for nanoparticles of high entropy materials, including powder X-ray diffraction and elemental mapping with scanning transmission electron microscopy, which are among the most commonly used techniques in laboratory settings. Finally, we share perspectives on emerging opportunities and future directions involving colloidal nanoparticles of high entropy materials, with an emphasis on synthesis, characterization, and fundamental knowledge that is needed for anticipated advances in key application areas.

Soft Chemistry of Hard Materials: Low-Temperature Pathways to Bulk and Nanostructured Layered Metal Borides.

Conspectus"Synthesis by design" is often considered to be the primary goal of chemists who make molecules and materials. Synthetic chemists usually have in mind a target they want to make, and they want to be able to design a pathway that can get them to that target as quickly and efficiently as possible. Chemists who synthesize refractory solids, which have melting points above 1000 °C and are often chemically inert at these high temperatures, have access to only a small number of synthetic strategies due to the need to overcome solid-state diffusion, which is the rate-limiting step in such reactions. The use of extremely high temperatures to facilitate diffusion among two or more refractory solids, which precedes any chemical reaction that must occur, generally drives the system to form only the product that is the most thermodynamically stable-the global minimum on an energy landscape-for a certain combination of elements. When trying to target a different product in the same system, one generally cannot rely on thermally driven reactions. Lower-temperature reactions that side step this diffusion limitation can succeed where high temperatures fail by providing access to local minima on an energy landscape. These local minima represent metastable phases that are primed for synthesis, but only if an appropriate pathway and set of reactions can be identified. It is therefore important to develop and understand low-temperature, or "soft", chemical reactions in "hard" refractory systems. These reactions allow us to apply the retrosynthetic framework that molecular chemists rely on to systems where chemists have not previously had such control over reactions, reactivities, and metastable product formation.In this Account, we discuss the development of soft chemical reactions of hard materials in the context of a class of layered, refractory metal borides that are precursors to an emerging family of two-dimensional nanomaterials. Layered ternary metal boride phases such as MoAlB have layers of metal borides, which are chemically unreactive, interleaved with layers of aluminum, which are reactive. Some of the interlayer aluminum can be deintercalated at room temperature in dilute aqueous sodium hydroxide, transforming stable MoAlB into destabilized MoAl1-xB. Mild thermal treatment of submicrometer grains of this destabilized MoAl1-xB sample allows it to traverse the energy landscape and crystallize as Mo2AlB2, a metastable compound. Further thermal treatment transforms Mo2AlB2 into a Mo2AlB2-alumina nanolaminate and ultimately mesoporous MoB, all through continued traversing of the energy landscape using mild chemical and thermal treatments. Similar topochemical manipulations, which maintain structure but change composition, are emerging for other MAB phases and are opening the door to new types of metastable compounds and nanostructured materials in traditionally refractory systems.

Synthesis and Magnetic, Optical, and Electrocatalytic Properties of High-Entropy Mixed-Metal Tungsten and Molybdenum Oxides.

High-entropy oxides (HEOs) are of interest for their unique physical and chemical properties. Significant lattice distortions, strain, and tolerance for high-vacancy concentrations set HEOs apart from single-metal or mixed-metal oxides. Herein, we synthesized and characterized the structures and compositions, along with the optical, magnetic, and electrocatalytic properties, of two families of high-entropy mixed-metal tungsten and molybdenum oxides, AWO4 and B2Mo3O8, where A and B are 3d transition metals. The HEOs A6WO4 (A = Mn, Fe, Co, Ni, Cu, and Zn) and B25Mo3O8 (B = Mn, Fe, Co, Ni, and Zn), as well as all accessible single-metal AWO4 and B2Mo3O8 parent compounds, were synthesized using high-temperature solid-state methods. X-ray photoelectron spectroscopy analysis of the surfaces revealed that the HEOs largely had the metal oxidation states expected from the bulk chemical formulas, but in some cases they were different than in the parent compounds. A6WO4 exhibited antiferromagnetic (AFM) ordering with a Néel temperature of 30 K, which is less than the average of its AFM parent compounds, and had a narrow band gap of 0.24 eV, which is much lower than all of its parent compounds. B25Mo3O8 was paramagnetic, despite the existence of AFM and ferromagnetic ordering in several of its parent compounds and had no observable band gap, which is analogous to its parent compounds. Both A6WO4 and B25Mo3O8 exhibited superior catalytic activity relative to the parent compounds for the oxygen evolution reaction, the oxidation half reaction of overall water splitting, under alkaline conditions, based on the overpotential required to reach the benchmark surface area normalized current density. Consistent with literature predictions of OER durability for ternary tungsten and molybdenum oxides, A6WO4 and B25Mo3O8 also exhibited stable performance without significant dissolution during 10 h stability experiments at a constant current.

Formation and Transformation of Cu2-xSe1-yTey Nanoparticles Synthesized by Tellurium Anion Exchange of Copper Selenide.

Ion exchange reactions of colloidal nanoparticles post-synthetically modify the composition while maintaining the morphology and crystal structure and therefore are important for tuning properties and producing otherwise inaccessible and/or metastable materials. Reactions involving anion exchange of metal chalcogenides are particularly interesting, as they involve the replacement of the sublattice that defines the structure while also requiring high temperatures that can be disruptive. Here, we show that the tellurium anion exchange of weissite Cu2-xSe nanoparticles using a trioctylphosphine-tellurium complex (TOP═Te) yields weissite Cu2-xSe1-yTey solid solutions, rather than complete exchange to weissite Cu2-xTe, with compositions that are tunable based on the amount of TOP═Te used. Upon storage at room temperature in either solvent or air, tellurium-rich Cu2-xSe1-yTey solid solution nanoparticles transform, over the span of several days, to a selenium-rich Cu2-xSe1-yTey composition. The tellurium that is expelled from the solid solution during this process migrates to the surface and forms a tellurium oxide shell, which correlates with the onset of particle agglomeration due to the change in surface chemistry. Collectively, this study demonstrates tunable composition during tellurium anion exchange of copper selenide nanoparticles along with unusual post-exchange reactivity that transforms the composition, surface chemistry, and colloidal dispersibility due to the apparent metastable nature of the solid solution product.

Band Gap Narrowing in a High-Entropy Spinel Oxide Semiconductor for Enhanced Oxygen Evolution Catalysis.

High-entropy oxides (HEOs), which contain five or more metal cations that are generally thought to be randomly mixed in a crystalline oxide lattice, can exhibit unique and enhanced properties, including improved catalytic performance, due to synergistic effects. Here, we show that band gap narrowing emerges in a high-entropy aluminate spinel oxide, (Fe0.2Co0.2Ni0.2Cu0.2Zn0.2)Al2O4 (A5Al2O4). The 0.9 eV band gap of A5Al2O4 is narrower than the band gaps of all parent spinel oxides. First-principles calculations for multicomponent AAl2O4 spinels indicate that the band gap narrowing arises from the broadening of the energy distribution of the 3d states due to variations in the electronegativities and crystal field splitting across the 3d transition-metal series. As a catalyst for the oxygen evolution reaction in an alkaline electrolyte, A5Al2O4 reaches a current density of 10 mA/cm2 at an overpotential of 400 mV, outperforming all of the single-metal end members at an applied potential of 1.7 V vs RHE. Catalyst deactivation occurs after 5 h at 10 mA/cm2 and is attributed, based on elemental analysis and grazing-incidence X-ray diffraction, to the formation of a passivating layer that blocks the high-entropy oxide surface. This result helps to validate that the HEO is the active catalyst. The observation of band gap narrowing in A5Al2O4 expands the scope of synergistic properties exhibited by high-entropy materials and offers insight into the question of how the electronic structure of multicomponent oxide materials can be engineered via a high-entropy approach to achieve enhanced catalytic properties.

Introducing Porosity into Refractory Molybdenum Boride through Controlled Decomposition of a Metastable Mo-Al-B Precursor.

The high temperatures typically required to synthesize refractory compounds preclude the formation of high-energy morphological features, including nanoscopic pores that are beneficial for applications, such as catalysis, that require higher surface areas. Here, we demonstrate a low-temperature multistep pathway to engineer mesoporosity into a catalytic refractory material. Mesoporous molybdenum boride, α-MoB, forms through the controlled thermal decomposition of nanolaminate-containing sheets of the metastable MAB (metal-aluminum-boron) phase Mo2AlB2 and amorphous alumina. Upon heating, the Mo2AlB2 layers of the Mo2AlB2-AlOx nanolaminate, which is derived from MoAlB, begin to bridge and decompose, forming inclusions of alumina in a framework of α-MoB. The alumina can be dissolved in aqueous sodium hydroxide in an autoclave, forming α-MoB with empty and accessible pores. Statistical analysis of the morphologies and dimensions of the pores reveals a correlation with grain size, which relates to the pathway by which the alumina inclusions form. The transformation of Mo2AlB2 to α-MoB is topotactic due to crystal structure relationships, resulting in a high density of stacking faults that can be modeled to account for the observed experimental diffraction data. Porosity was validated by comparing surface areas and demonstrating catalytic viability for the hydrogen evolution reaction.