ABSTRACT
Engineered living microtissues such as cellular spheroids and organoids have enormous potential for the study and regeneration of tissues and organs. Microtissues are typically engineered via self-assembly of adherent cells into cellular spheroids, which are characterized by little to no cell-material interactions. Consequently, 3D microtissue models currently lack structural biomechanical and biochemical control over their internal microenvironment resulting in suboptimal functional performance such as limited stem cell differentiation potential. Here, this work report on stimuli-responsive cell-adhesive micromaterials (SCMs) that can self-assemble with cells into 3D living composite microtissues through integrin binding, even under serum-free conditions. It is demonstrated that SCMs homogeneously distribute within engineered microtissues and act as biomechanically and biochemically tunable designer materials that can alter the composite tissue microenvironment on demand. Specifically, cell behavior is controlled based on the size, stiffness, number ratio, and biofunctionalization of SCMs in a temporal manner via orthogonal secondary crosslinking strategies. Photo-based mechanical tuning of SCMs reveals early onset stiffness-controlled lineage commitment of differentiating stem cell spheroids. In contrast to conventional encapsulation of stem cell spheroids within bulk hydrogel, incorporating cell-sized SCMs within stem cell spheroids uniquely provides biomechanical cues throughout the composite microtissues' volume, which is demonstrated to be essential for osteogenic differentiation.
Subject(s)
Osteogenesis , Stem Cells , Cell Differentiation , Spheroids, Cellular , HydrogelsABSTRACT
Osteoblasts derived from mouse skulls have increased osteoclastogenic potential compared to long bone osteoblasts when stimulated with 1,25(OH)2 vitamin D3 (vitD3). This indicates that bone cells from specific sites can react differently to biochemical signals, e.g., during inflammation or as emitted by bioactive bone tissue-engineering constructs. Given the high turn-over of alveolar bone, we hypothesized that human alveolar bone-derived osteoblasts have an increased osteogenic and osteoclastogenic potential compared to the osteoblasts derived from long bone. The osteogenic and osteoclastogenic capacity of alveolar bone cells and long bone cells were assessed in the presence and absence of osteotropic agent vitD3. Both cell types were studied in osteogenesis experiments, using an osteogenic medium, and in osteoclastogenesis experiments by co-culturing osteoblasts with peripheral blood mononuclear cells (PBMCs). Both osteogenic and osteoclastic markers were measured. At day 0, long bones seem to have a more late-osteoblastic/preosteocyte-like phenotype compared to the alveolar bone cells as shown by slower proliferation, the higher expression of the matrix molecule Osteopontin (OPN) and the osteocyte-enriched cytoskeletal component Actin alpha 1 (ACTA1). This phenotype was maintained during the osteogenesis assays, where long bone-derived cells still expressed more OPN and ACTA1. Under co-culture conditions with PBMCs, long bone cells also had a higher Tumor necrose factor-alfa (TNF-α) expression and induced the formation of osteoclasts more than alveolar bone cells. Correspondingly, the expression of osteoclast genes dendritic cell specific transmembrane protein (DC-STAMP) and Receptor activator of nuclear factor kappa-Β ligand (RankL) was higher in long bone co-cultures. Together, our results indicate that long bone-derived osteoblasts are more active in bone-remodeling processes, especially in osteoclastogenesis, than alveolar bone-derived cells. This indicates that tissue-engineering solutions need to be specifically designed for the site of application, such as defects in long bones vs. the regeneration of alveolar bone after severe periodontitis.
Subject(s)
Alveolar Process/cytology , Osteogenesis , Tibia/cytology , Cell Differentiation , Cell Proliferation , Cells, Cultured , Humans , Osteoblasts/cytology , Osteoclasts/cytologyABSTRACT
Incorporation of 1,25(OH)2 vitamin D3 (vitD3) into tissue-engineered scaffolds could aid the healing of critical-sized bone defects. We hypothesize that shorter applications of vitD3 lead to more osteogenic differentiation of mesenchymal stem cells (MSCs) than a sustained application. To test this, release from a scaffold was mimicked by exposing MSCs to exactly controlled vitD3 regimens. Human adipose stem cells (hASCs) were seeded onto calcium phosphate particles, cultured for 20 days, and treated with 124 ng vitD3, either provided during 30 min before seeding ([200 nM]), during the first two days ([100 nM]), or during 20 days ([10 nM]). Alternatively, hASCs were treated for two days with 6.2 ng vitD3 ([10 nM]). hASCs attached to the calcium phosphate particles and were viable (~75%). Cell number was not affected by the various vitD3 applications. VitD3 (124 ng) applied over 20 days increased cellular alkaline phosphatase activity at Days 7 and 20, reduced expression of the early osteogenic marker RUNX2 at Day 20, and strongly upregulated expression of the vitD3 inactivating enzyme CYP24. VitD3 (124 ng) also reduced RUNX2 and increased CYP24 applied at [100 nM] for two days, but not at [200 nM] for 30 min. These results show that 20-day application of vitD3 has more effect on hASCs than the same total amount applied in a shorter time span.
Subject(s)
Adipose Tissue/cytology , Cholecalciferol/pharmacology , Stem Cells/cytology , Stem Cells/drug effects , Alkaline Phosphatase/metabolism , Cell Differentiation/drug effects , Cells, Cultured , Humans , Osteogenesis/drug effectsABSTRACT
Spatiotemporal control over engineered tissues is highly desirable for various biomedical applications as it emulates the dynamic behavior of natural tissues. Current spatiotemporal biomaterial functionalization approaches are based on cytotoxic, technically challenging, or non-scalable chemistries, which has hampered their widespread usage. Here we report a strategy to spatiotemporally functionalize (bio)materials based on competitive supramolecular complexation of avidin and biotin analogs. Specifically, an injectable hydrogel is orthogonally post-functionalized with desthiobiotinylated moieties using multivalent neutravidin. In situ exchange of desthiobiotin by biotin enables spatiotemporal material functionalization as demonstrated by the formation of long-range, conformal, and contra-directional biochemical gradients within complex-shaped 3D hydrogels. Temporal control over engineered tissue biochemistry is further demonstrated by timed presentation and sequestration of growth factors using desthiobiotinylated antibodies. The method's universality is confirmed by modifying hydrogels with biotinylated fluorophores, peptides, nanoparticles, enzymes, and antibodies. Overall, this work provides a facile, cytocompatible, and universal strategy to spatiotemporally functionalize materials.
Subject(s)
Avidin/chemistry , Biocompatible Materials/chemistry , Biotin/chemistry , Macromolecular Substances/chemistry , Animals , Antibodies/chemistry , Antibodies/metabolism , Avidin/metabolism , Biocompatible Materials/metabolism , Biotin/analogs & derivatives , Biotin/metabolism , Biotinylation/methods , Cell Line , Humans , Hydrogels/chemistry , Hydrogels/metabolism , Macromolecular Substances/metabolism , Mice , Nanoparticles/chemistry , Peptides/chemistry , Peptides/metabolism , Spatio-Temporal Analysis , Tissue Engineering/methodsABSTRACT
Critical-size bone defects are a common clinical problem. The golden standard to treat these defects is autologous bone grafting. Besides the limitations of availability and co-morbidity, autografts have to be manually adapted to fit in the defect, which might result in a sub-optimal fit and impaired healing. Scaffolds with precise dimensions can be created using 3-dimensional (3D) printing, enabling the production of patient-specific, 'tailor-made' bone substitutes with an exact fit. Calcium phosphate (CaP) is a popular material for bone tissue engineering due to its biocompatibility, osteoconductivity, and biodegradable properties. To enhance bone formation, a bioactive 3D-printed CaP scaffold can be created by combining the printed CaP scaffold with biological components such as growth factors and cytokines, e.g., vascular endothelial growth factor (VEGF), bone morphogenetic protein-2 (BMP-2), and interleukin-6 (IL-6). However, the 3D-printing of CaP with a biological component is challenging since production techniques often use high temperatures or aggressive chemicals, which hinders/inactivates the bioactivity of the incorporated biological components. Therefore, in our laboratory, we routinely perform extrusion-based 3D-printing with a biological binder at room temperature to create porous scaffolds for bone healing. In this method paper, we describe in detail a 3D-printing procedure for CaP paste with K-carrageenan as a biological binder.
ABSTRACT
Anterior cruciate ligament (ACL) reconstruction involves the replacement of the torn ligament with a new graft, often a hamstring tendon (HT). Described as similar, the ACL and HT have intrinsic differences related to their distinct anatomical locations. From a cellular perspective, identifying these differences represents a step forward in the search for new cues that enhance recovery after the reconstruction. The purpose of this study was to characterize the phenotype and multilineage potential of ACL- and HT-derived cells. ACL- and HT-derived cells were isolated from tissue harvest from patients undergoing total knee arthroplasty (TKA) or ACL reconstruction. In total, three ACL and three HT donors were investigated. Cell morphology, self-renewal potential (CFU-F), surface marker profiling, expression of tendon/ligament-related markers (PCR) and multilineage potential were analysed for both cell types; both had fibroblast-like morphology and low self-renewal potential. No differences in the expression of tendon/ligament-related genes or a selected set of surface markers were observed between the two cell types. However, differences in their multilineage potential were observed: while ACL-derived cells showed a high potential to differentiate into chondrocytes and adipocytes, but not osteoblasts, HT-derived cells showed poor potential to form adipocytes, chondrocytes and osteoblasts. Our results demonstrated that HT-derived cells have low multilineage potential compared to ACL-derived cells, further highlighting the need for extrinsic signals to fully restore the function of the ACL upon reconstruction. Copyright © 2015 John Wiley & Sons, Ltd.
Subject(s)
Anterior Cruciate Ligament Reconstruction/methods , Anterior Cruciate Ligament/cytology , Anterior Cruciate Ligament/surgery , Hamstring Tendons/cytology , Aged , Biomarkers/metabolism , Cell Lineage , Cell Self Renewal , Cell Separation , Collagenases/metabolism , Colony-Forming Units Assay , Female , Humans , Male , Middle Aged , Osteogenesis , RNA, Messenger/genetics , RNA, Messenger/metabolism , Young AdultABSTRACT
Decellularized extracellular matrix (ECM) has recently gained a lot of interest as an instructive biomaterial for regenerative medicine applications. In this study, the ability of adult human mesenchymal stem cell (hMSC)-derived ECM to rescue the phenotype of osteoarthritic (OA) chondrocytes and to further stimulate the differentiation of healthy (HL) chondrocytes was evaluated. ECMs were prepared by decellularizing hMSCs cultured in basic medium (BM) and chondrogenic medium (CM). The obtained ECM was then combined with a polymeric solution of Poly (ε-caprolactone) (PCL) dissolved in 1, 1, 1, 3, 3, 3-hexafluoro-2-propanol (HFIP) and electrospun meshes were fabricated. Electrospun ECM scaffolds were characterized using scanning electron microscopy (SEM) and picrosirius red staining was used to confirm the presence of collagen. OA and HL chondrocytes were cultured on scaffolds containing hMSC ECM in BM or CM and compared to PCL electrospun scaffolds without ECM. Metabolic activity and chondrogenic gene expression were assessed by Alamar blue assay and quantitative PCR (qPCR) analysis, respectively. The ECM presence resulted in a significant difference in chondrocyte metabolic activity compared to PCL scaffolds alone. HL chondrocytes cultured for 21 days in chondrogenic medium on electrospun scaffolds containing hMSC ECM from BM showed a significant increase in collagen II and aggrecan expression compared to hMSC ECM from CM and PCL scaffolds without ECM incorporation. No significant influence of hMSC ECM presence on the chondrogenic signature of OA chondrocytes was found. The influence of decellularized hMSC ECM on HL chondrocytes suggests that hMSC-derived ECM scaffolds are promising candidates for cartilage tissue engineering applications.