ABSTRACT
Controlling the two-dimensional polymerization processes of two-dimensional covalent organic frameworks (2D COFs) is essential to fully realizing their distinct properties. Although most 2D COFs have been isolated as polycrystalline aggregates with only nanometer-scale crystalline domains, we have identified rapid, solvothermal conditions that provide micrometer-scale and larger single-crystal 2D polymers for a few 2D COFs. Yet it remains unclear why certain conditions produce far larger 2D polymers than others, which hinders generalizing these findings. The guiding principles for controlled two-dimensional polymerization in solution remain unclear. Here, we study the crystallization processes of both single-crystalline and polycrystalline 2D COFs using ultrasmall-angle X-ray scattering (USAXS) for the first time, through which we characterized COF formation conditions with scattering data collected every few seconds. In situ USAXS experiments revealed distinct growth mechanisms between single-crystalline and polycrystalline COFs and suggested a nonclassical particle fusion-based growth model for single-crystalline COFs that results in faceted, hexagonal particles. These findings were corroborated by in situ wide-angle X-ray scattering (WAXS) experiments and scanning electron microscopy (SEM). In contrast, polymerizations that provide polycrystalline COFs evolve as spherical aggregates that do not fuse in the same way. These insights into how micrometer-sized, crystalline 2D polymers are formed in solution point a way forward to establishing a robust connection between the 2D polymer structure and designed properties by controlling their polymerization processes.
ABSTRACT
Electrostatic forces in solutions are highly relevant to a variety of fields, ranging from electrochemical energy storage to biology. However, their manifestation in concentrated electrolytes is not fully understood, as exemplified by counterintuitive observations of colloidal stability and long-ranged repulsions in molten salts. Highly charged biomolecules, such as DNA, respond sensitively to ions in dilute solutions. Here, we use non-base-pairing DNA-coated nanoparticles (DNA-NP) to analyze electrostatic interactions in concentrated salt solutions. Despite their negative charge, these conjugates form colloidal crystals in solutions of sufficient divalent cation concentration. We utilize small-angle X-ray scattering (SAXS) to study such DNA-NP assemblies across the full accessible concentration ranges of aqueous CaCl2, MgCl2, and SrCl2 solutions. SAXS shows that the crystallinity and phases of the assembled structures vary with cation type. For all tested salts, the aggregates contract with added ions at low salinities and then begin expanding above a cation-dependent threshold salt concentration. Wide-angle X-ray scattering (WAXS) reveals enhanced positional correlations between ions in the solution at high salt concentrations. Complementary molecular dynamics simulations show that these ion-ion interactions reduce the favorability of dense ion configurations within the DNA brushes below that of the bulk solution. Measurements in solutions with lowered permittivity demonstrate a simultaneous increase in ion coupling and decrease in the concentration at which aggregate expansion begins, thus confirming the connection between these phenomena. Our work demonstrates that interactions between charged objects continue to evolve considerably into the high-concentration regime, where classical theories project electrostatics to be of negligible consequence.
ABSTRACT
Colloidal crystals have applications in water treatments, including water purification and desalination technologies. It is, therefore, important to understand the interactions between colloids as a function of electrolyte concentration. We study the assembly of DNA-grafted gold nanoparticles immersed in concentrated electrolyte solutions. Increasing the concentration of divalent Ca2+ ions leads to the condensation of nanoparticles into face-centered-cubic (FCC) crystals at low electrolyte concentrations. As the electrolyte concentration increases, the system undergoes a phase change to body-centered-cubic (BCC) crystals. This phase change occurs as the interparticle distance decreases. Molecular dynamics analysis suggests that the interparticle interactions change from strongly repulsive to short-range attractive as the divalent-electrolyte concentration increases. A thermodynamic analysis suggests that increasing the salt concentration leads to significant dehydration of the nanoparticle environment. We conjecture that the intercolloid attractive interactions and dehydrated states favour the BCC structure. Our results gain insight into salting out of colloids such as proteins as the concentration of salt increases in the solution.
Subject(s)
Metal Nanoparticles , Nanoparticles , Colloids/chemistry , DNA/chemistry , Electrolytes/chemistry , Gold/chemistry , Nanoparticles/chemistry , Calcium/chemistryABSTRACT
How molecular chirality manifests at the nano- to macroscale has been a scientific puzzle since Louis Pasteur discovered biochirality. Chiral molecules assemble into meso-shapes such as twisted and helical ribbons, helicoidal scrolls (cochleates), or möbius strips (closed twisted ribbons). Here we analyze self-assembly for a series of amphiphiles, C n -K, consisting of an ionizable amino acid [lysine (K)] coupled to alkyl tails with n = 12, 14, or 16 carbons. This simple system allows us to probe the effects of electrostatic and van der Waals interactions in chiral assemblies. Small/wide-angle X-ray scattering (SAXS/WAXS) reveals that at low pH, where the headgroups are ionized (+1), C16-K forms high aspect ratio, planar crystalline bilayers. Molecular dynamics (MD) simulations reveal that tilted tails of the bilayer leaflets are interdigitated. SAXS shows that, with increasing salt concentration, C16-K molecules assemble into cochleates, whereas at elevated pH (reduced degree of ionization), helices are observed for all C n -K assemblies. The shape selection between helices and scrolls is explained by a membrane energetics model. The nano- to meso-scale structure of the chiral assemblies can be continuously controlled by solution ionic conditions. Overall, our study represents a step toward an electrostatics-based approach for shape selection and nanoscale structure control in chiral assemblies.
ABSTRACT
Bilayers of amphiphiles can organize into spherical vesicles, nanotubes, planar, undulating, and helical nanoribbons, and scroll-like cochleates. These bilayer-related architectures interconvert under suitable conditions. Here, a charged, chiral amphiphile (palmitoyl-lysine, C16-K1) is used to elucidate the pathway for planar nanoribbon to cochleate transition induced by salt (NaCl) concentration. In situ small- and wide-angle X-ray scattering (SAXS/WAXS), atomic force and cryogenic transmission electron microscopies (AFM and cryo-TEM) tracked these transformations over angstrom to micrometer length scales. AFM reveals that the large length (L) to width (W) ratio nanoribbons (L/W > 10) convert to sheets (L/W â 1) before rolling into cochleates. A theoretical model based on electrostatic and surface energies shows that the nanoribbons convert to sheets via a first-order transition, at a critical Debye length, with 2 shallow minima of the order of thermal energy at L/W >> 1 and at L/W = 1. SAXS shows that interbilayer spacing (D) in the cochleates scales linearly with the Debye length, and ranges from 13 to 35 nm for NaCl concentrations from 100 to 5 mM. Theoretical arguments that include electrostatic and elastic energies explain the membrane rolling and the bilayer separation-Debye length relationship. These models suggest that the salt-induced ribbon to cochleate transition should be common to all charged bilayers possessing an intrinsic curvature, which in the present case originates from molecular chirality. Our studies show how electrostatic interactions can be tuned to attain and control cochleate structures, which have potential for encapsulating, and releasing macromolecules in a size-selective manner.
ABSTRACT
Label-free in situ X-ray scattering from protein spherical nucleic acids (Pro-SNAs, consisting of protein cores densely functionalized with covalently bound DNA) was used to elucidate the enzymatic reaction pathway for the DNase I-induced degradation of DNA. Time-course small-angle X-ray scattering (SAXS) and gel electrophoresis reveal a two-state system with time-dependent populations of intact and fully degraded DNA in the Pro-SNAs. SAXS shows that in the fully degraded state, the DNA strands forming the outer shell of the Pro-SNA were completely digested. SAXS analysis of reactions with different Pro-SNA concentrations reveals a reaction pathway characterized by a slow, rate determining DNase I-Pro-SNA association, followed by rapid DNA hydrolysis. Molecular dynamics (MD) simulations provide the distributions of monovalent and divalent ions around the Pro-SNA, relevant to the activity of DNase I. Taken together, in situ SAXS in conjunction with MD simulations yield key mechanistic and structural insights into the interaction of DNA with DNase I. The approach presented here should prove invaluable in probing other enzyme-catalyzed reactions on the nanoscale.
Subject(s)
DNA/chemistry , Scattering, Small Angle , X-Ray Diffraction/methods , Deoxyribonuclease I/chemistry , Molecular Dynamics Simulation , Nucleic Acid Conformation , Nucleic Acids/chemistryABSTRACT
One of the more useful syntheses of single crystalline, uniform Au nanorods from Au spherical seeds relies on the addition of trace Ag ions, yet the role that Ag+ plays has remained both elusive and controversial, due in part to lack of knowledge of how the Ag distribution in the nanorod evolves over time. In this work, we fill in this knowledge gap by correlating the spatial distribution of Ag within Au nanorods with nanorod anisotropic growth through time-course X-ray absorption spectroscopy (XAFS)-derived atomic-level elemental coordination paired with electron microscopy for nanoscale morphological analysis. Using this method, a plausible pathway for the conversion of spherical seeds into Au nanorods is proposed. Evidence shows that the nanorod anisotropic growth is directly related to the Ag surface coverage. Anisotropy is induced early in the reaction when Ag first deposits onto the nanoparticle surface, but growth occurs more isotropically as the reaction progresses and Ag diffuses into the nanorod bulk. The results of this investigation and methods employed should be extendable to many anisotropic nanoparticle syntheses that make use of trace elemental species as shape-control additives.
ABSTRACT
Protein-spherical nucleic acid conjugates (Pro-SNAs) are an emerging class of bioconjugates that have properties defined by their protein cores and dense shell of oligonucleotides. They have been used as building blocks in DNA-driven crystal engineering strategies and show promise as agents that can cross cell membranes and affect both protein and DNA-mediated processes inside cells. However, ionic environments surrounding proteins can influence their activity and conformational stability, and functionalizing proteins with DNA substantively changes the surrounding ionic environment in a nonuniform manner. Techniques typically used to determine protein structure fail to capture such irregular ionic distributions. Here, we determine the counterion radial distribution profile surrounding Pro-SNAs dispersed in RbCl with 1 nm resolution through in situ anomalous small-angle X-ray scattering (ASAXS) and classical density functional theory (DFT). SAXS analysis also reveals the radial extension of the DNA and the linker used to covalently attach the DNA to the protein surface. At the experimental salt concentration of 50 mM RbCl, Rb+ cations compensate â¼90% of the negative charge due to the DNA and linker. Above 75 mM, DFT calculations predict overcompensation of the DNA charge by Rb+. This study suggests a method for exploring Pro-SNA structure and function in different environments through predictions of ionic cloud densities as a function of salt concentration, DNA grafting density, and length. Overall, our study demonstrates that solution X-ray scattering combined with DFT can discern counterionic distribution and submolecular features of highly charged, complex nanoparticle constructs such as Pro-SNAs and related nucleic acid conjugate materials.
ABSTRACT
Bimetallic hollow, porous noble metal nanoparticles are of broad interest for biomedical, optical and catalytic applications. The most straightforward method for preparing such structures involves the reaction between HAuCl4 and well-formed Ag particles, typically spheres, cubes, or triangular prisms, yet the mechanism underlying their formation is poorly understood at the atomic scale. By combining in situ nanoscopic and atomic-scale characterization techniques (XAFS, SAXS, XRF, and electron microscopy) to follow the process, we elucidate a plausible reaction pathway for the conversion of citrate-capped Ag nanospheres to AgAu nanocages; importantly, the hollowing event cannot be explained by the nanoscale Kirkendall effect, nor by Galvanic exchange alone, two processes that have been previously proposed. We propose a modification of the bulk Galvanic exchange process that takes into account considerations that can only occur with nanoscale particles. This nanoscale Galvanic exchange process explains the novel morphological and chemical changes associated with the typically observed hollowing process.
ABSTRACT
Stimuli-induced structural transformations of molecular assemblies in aqueous solutions are integral to nanotechnological applications and biological processes. In particular, pH responsive amphiphiles as well as proteins with various degrees of ionization can reconfigure in response to pH variations. Here, we use in situ small and wide-angle X-ray scattering (SAXS/WAXS), transmission electron microscopy (TEM), and Monte Carlo simulations to show how charge regulation via pH induces morphological changes in the assembly of a positively charged peptide amphiphile (PA). Monte Carlo simulations and pH titration measurements reveal that ionic correlations in the PA assemblies shift the ionizable amine pK â¼ 8 from pK â¼ 10 in the lysine headgroup. SAXS and TEM show that with increasing pH, the assembly undergoes spherical micelle to cylindrical nanofiber to planar bilayer transitions. SAXS/WAXS reveal that the bilayer leaflets are interdigitated with the tilted PA lipid tails crystallized on a rectangular lattice. The details of the molecular packing in the membrane result from interplay between steric and van der Waals interactions. We speculate that this packing motif is a general feature of bilayers comprised of amphiphilic lipids with large ionic headgroups. Overall, our studies correlate the molecular charge and the morphology for a pH-responsive PA system and provide insights into the Å-scale molecular packing in such assemblies.
ABSTRACT
Solutions at high salt concentrations are used to crystallize or segregate charged colloids, including proteins and polyelectrolytes via a complex mechanism referred to as "salting-out". Here, we combine small-angle X-ray scattering (SAXS), molecular dynamics (MD) simulations, and liquid-state theory to show that salting-out is a long-range interaction, which is controlled by electrolyte concentration and colloid charge density. As a model system, we analyze Au nanoparticles coated with noncomplementary DNA designed to prevent interparticle assembly via Watson-Crick hybridization. SAXS shows that these highly charged nanoparticles undergo "gas" to face-centered cubic (FCC) to "glass-like" transitions with increasing NaCl or CaCl2 concentration. MD simulations reveal that the crystallization is concomitant with interparticle interactions changing from purely repulsive to a "long-range potential well" condition. Liquid-state theory explains this attraction as a sum of cohesive and depletion forces that originate from the interelectrolyte ion and electrolyte-ion-nanoparticle positional correlations. Our work provides fundamental insights into the effect of ionic correlations in the salting-out mechanism and suggests new routes for the crystallization of colloids and proteins using concentrated salts.
ABSTRACT
Maintaining the intrinsic features of mesophases is critically important when employing phospholipid self-assemblies to mimic biomembranes. Inorganic solid surfaces provide platforms to support, guide, and analyze organic self-assemblies but impose upon them a tendency to form well-ordered phases not often found in biomembranes. To address this, we measured mesophase formation in a thiolate self-assembled monolayer (SAM) of diacyl phospholipid, 1,2-dipalmitoyl-sn-glycero-3-phosphothioethanol (DPPTE) on Au(111), and provide thermodynamic analysis on the mixing behavior of inequivalent DPPTE acyl chains. Our work has uncovered three fundamental issues that enable mesophase formation: (1) Elimination of templating effects of the solid surface, (2) Weakening intermolecular and molecule-substrate interactions in adsorbates, and (3) Equilibrium through entropy-driven self-assembly. Thus, our work provides a more holistic understanding of phase behavior, from liquid phases to mesophases to highly crystalline phases, in organic self-assemblies on solid surfaces, which may extend their applications in nanodevices and to the wider fields of biology and medicine.
Subject(s)
Triglycerides/chemistry , Gold/chemistry , Models, Molecular , Molecular Conformation , Phase Transition , Surface PropertiesABSTRACT
Charged nanoscale filaments are well-known in natural systems such as filamentous viruses and the cellular cytoskeleton. The unique properties of these structures have inspired the design of self-assembled nanofibers for applications in regenerative medicine, drug delivery, and catalysis, among others. We report here on an amphiphile of completely different chemistry based on azobenzene and a quaternary ammonium bromide headgroup that self-assembles into highly charged nanofibers in water and orders into two-dimensional crystals. Interestingly small-angle X-ray scattering (SAXS) shows that these fibers of 5.6 nm cross-sectional diameter order into crystalline arrays with remarkably large interfiber spacings of up to 130 nm. Solution concentration and temperature can be adjusted to control the interfiber spacings, and addition of salt destroyed the crystal packing indicating the electrostatic repulsions are necessary for the observed ordering. Our findings here demonstrate the universal nature of this phenomenon in systems of highly charged nanoscale filaments.
Subject(s)
Nanofibers/chemistry , Molecular Structure , Scattering, Small AngleABSTRACT
Scanning tunnelling microscopy and X-ray reflectivity are used to characterize adlayers of perylenetetracarboxylic diimide (PTCDI) deposited on epitaxial graphene (EG) on SiC(0001). PTCDI adopts a herringbone structural phase on EG/SiC that can accommodate sub-5 nm voids with molecularly defined boundaries and isolated molecular vacancies at room temperature. The PTCDI monolayer remains intact up to substrate temperatures of ~260 °C, thus demonstrating enhanced thermal stability compared to previously studied perylene derivatives on EG/SiC.
ABSTRACT
The radial distribution of monovalent cations surrounding spherical nucleic acid-Au nanoparticle conjugates (SNA-AuNPs) is determined by in situ small-angle x-ray scattering (SAXS) and classical density functional theory (DFT) calculations. Small differences in SAXS intensity profiles from SNA-AuNPs dispersed in a series of solutions containing different monovalent ions (Na(+), K(+), Rb(+), or Cs(+)) are measured. Using the "heavy ion replacement" SAXS (HIRSAXS) approach, we extract the cation-distribution-dependent contribution to the SAXS intensity and show that it agrees with DFT predictions. The experiment-theory comparisons reveal the radial distribution of cations as well as the conformation of the DNA in the SNA shell. The analysis shows an enhancement to the average cation concentration in the SNA shell that can be up to 15-fold, depending on the bulk solution ionic concentration. The study demonstrates the feasibility of HIRSAXS in probing the distribution of monovalent cations surrounding nanoparticles with an electron dense core (e.g., metals).
Subject(s)
Gold/chemistry , Nanoparticles/chemistry , Nucleic Acids/chemistry , Cations , DNA/chemistry , Electrons , Ions , Nanotechnology , Nucleic Acid Conformation , Oligonucleotides/chemistry , Poisson Distribution , Scattering, Radiation , Scattering, Small Angle , Sulfhydryl Compounds , X-Ray Diffraction , X-RaysABSTRACT
The crystallization of molecules with polar and hydrophobic groups, such as ionic amphiphiles and proteins, is of paramount importance in biology and biotechnology. By coassembling dilysine (+2) and carboxylate (-1) amphiphiles of various tail lengths into bilayer membranes at different pH values, we show that the 2D crystallization process in amphiphile membranes can be controlled by modifying the competition of long-range and short-range interactions among the polar and the hydrophobic groups. The pH and the hydrophobic tail length modify the intermolecular packing and the symmetry of their crystalline phase. For hydrophobic tail lengths of 14 carbons (C14), we observe the coassembly into crystalline bilayers with hexagonal molecular ordering via in situ small- and wide-angle X-ray scattering. As the tail length increases, the hexagonal lattice spacing decreases due to an increase in van der Waals interactions, as demonstrated by atomistic molecular dynamics simulations. For C16 and C18 we observe a reentrant crystalline phase transition sequence, hexagonal-rectangular-C-rectangular-P-rectangular-C-hexagonal, as the solution pH is increased from 3 to 10.5. The stability of the rectangular phases, which maximize tail packing, increases with increasing tail length. As a result, for very long tails (C22), the possibility of observing packing symmetries other than rectangular-C phases diminishes. Our work demonstrates that it is possible to systematically exchange chemical and mechanical energy by changing the solution pH value within a range of physiological conditions at room temperature in bilayers of molecules with ionizable groups.
Subject(s)
Cell Engineering/methods , Crystallization/methods , Membranes/chemistry , Surface-Active Agents/chemistry , Carbon/chemistry , Diffusion , Hydrogen-Ion Concentration , Hydrophobic and Hydrophilic Interactions , Membranes/metabolism , Molecular Structure , Scattering, Radiation , TemperatureABSTRACT
Molecular-scale control over the integration of disparate materials on graphene is a critical step in the development of graphene-based electronics and sensors. Here, we report that self-assembled monolayers of 10,12-pentacosadiynoic acid (PCDA) on epitaxial graphene can be used to template the reaction and directed growth of atomic layer deposited (ALD) oxide nanostructures with sub-10 nm lateral resolution. PCDA spontaneously assembles into well-ordered domains consisting of one-dimensional molecular chains that coat the entire graphene surface in a manner consistent with the symmetry of the underlying graphene lattice. Subsequently, zinc oxide and alumina ALD precursors are shown to preferentially react with the functional moieties of PCDA, resulting in templated oxide nanostructures. The retention of the original one-dimensional molecular ordering following ALD is dependent on the chemical reaction pathway and the stability of the monolayer, which can be enhanced via ultraviolet-induced molecular cross-linking.
Subject(s)
Fatty Acids, Unsaturated/chemistry , Graphite/chemistry , Nanostructures/chemistry , Zinc Oxide/chemistry , Aluminum Oxide/chemistry , Biosensing Techniques , ElectronicsABSTRACT
Coassembled molecular structures are known to exhibit a large variety of geometries and morphologies. A grand challenge of self-assembly design is to find techniques to control the crystal symmetries and overall morphologies of multicomponent systems. By mixing +3 and -1 ionic amphiphiles, we assemble crystalline ionic bilayers in a large variety of geometries that resemble polyhedral cellular crystalline shells and archaea wall envelopes. We combine TEM with SAXS and WAXS to characterize the coassembled structures from the mesoscopic to nanometer scale. The degree of ionization of the amphiphiles and their intermolecular electrostatic interactions are controlled by varying pH. At low and high pH values, we observe closed, faceted vesicles with two-dimensional hexagonal molecular arrangements, and at intermediate pH, we observe ribbons with rectangular-C packing. Furthermore, as pH increases, we observe interdigitation of the bilayer leaflets. Accurate atomistic molecular dynamics simulations explain the pH-dependent bilayer thickness changes and also reveal bilayers of hexagonally packed tails at low pH, where only a small fraction of anionic headgroups is charged. Coarse-grained simulations show that the mesoscale geometries at low pH are faceted vesicles where liquid-like edges separate flat crystalline domains. Our simulations indicate that the curved-to-polyhedral shape transition can be controlled by tuning the tail density in regions where sharp bends can form the polyhedral edges. In particular, the pH acts to control the overall morphology of the ionic bilayers by changing the local crystalline order of the amphiphile tails.
Subject(s)
Cell Membrane/chemistry , Molecular Dynamics Simulation , Crystallization , Hydrogen-Ion Concentration , Lipid Bilayers/chemistry , Molecular Conformation , Static ElectricityABSTRACT
Organic thin film transistor (OTFT) performance is highly materials interface-dependent, and dramatic performance enhancements can be achieved by properly modifying the semiconductor/gate dielectric interface. However, the origin of these effects is not well understood, as this is a classic "buried interface" problem that has traditionally been difficult to address. Here we address the question of how n-octadecylsilane (OTS)-derived self-assembled monolayers (SAMs) on Si/SiO(2) gate dielectrics affect the OTFT performance of the archetypical small-molecule p-type semiconductors P-BTDT (phenylbenzo[d,d]thieno[3,2-b;4,5-b]dithiophene) and pentacene using combined in situ sum frequency generation spectroscopy, atomic force microscopy, and grazing incidence and reflectance X-ray scattering. The molecular order and orientation of the OTFT components at the dielectric/semiconductor interface is probed as a function of SAM growth mode in order to understand how this impacts the overlying semiconductor growth mode, packing, crystallinity, and carrier mobility, and hence, transistor performance. This understanding, using a new, humidity-specific growth procedure, leads to a reproducible, scalable process for highly ordered OTS SAMs, which in turn nucleates highly ordered p-type semiconductor film growth, and optimizes OTFT performance. Surprisingly, the combined data reveal that while SAM molecular order dramatically impacts semiconductor crystalline domain size and carrier mobility, it does not significantly influence the local orientation of the overlying organic semiconductor molecules.
ABSTRACT
Macromolecular layers rich in amino acids and with some sulfated polysaccharides appear to control oriented calcite growth in living organisms. Calcite crystals nucleating under floating acid monolayers have been found to be unoriented on average. We have now observed directly, using in situ grazing incidence X-ray diffraction, that there is a 1:1 match between the monolayer unit cell and the unit cell of the (001) plane of calcite. Thus, sulfate head groups appear to act as templates for the growth of (001)-oriented calcite crystals, which is the orientation commonly found in biominerals.