Development of Lecithin/Chitosan Nanoparticles for Promoting Topical Delivery of Propranolol Hydrochloride: Design, Optimization and In-Vivo Evaluation.

Propranolol (PPL) administered orally is considered as the first line drug for the treatment of infantile hemangioma, however several systemic adverse effects limit its use. For this reason, our work tackles the development and evaluation of PPL loaded chitosan nanoparticles (NPs), as an effective alternative for the treatment of infantile hemangioma. PPL -NPs were prepared using the double emulsion technique and the influence of the formulation variables on drug entrapment efficiency (EE), particle size (PS), percent released after 24 h (%R24h) and zeta potential (ZP) were optimized using full factorial design. Two systems, namely F3 and F28 showing highest E.E., ZP and %R24h with lowest PS, were fully characterized for DSC and TEM and incorporated into hydrogel with adequate viscosity. After ensuring safety for the selected nanoparticle, the hydrogel containing the optimized system was applied topically to rats. The in-vivo skin deposition in rats showed an accumulation of propranolol from the lecithin/chitosan nanocarrier by 1.56-1.91-fold when compared to the drug solution. The obtained result was further supported by the confocal laser scanning microscopy which showed fluorescence across the skin. PPL-HCL-loaded lecithin/chitosan nanoparticles could be considered as a potential candidate for treating infantile hemangiomas (IH) by maintaining therapeutic concentration topically while minimizing systemic side effects.

Development of tizanidine loaded aspasomes as transdermal delivery system: ex-vivo and in-vivo evaluation.

New generation of amphiphilic vesicles known as aspasomes were investigated as potential carriers for transdermal delivery of tizanidine (TZN). Using full factorial design, an optimal formulation was developed by evaluating the effects of selected variables on the properties of the vesicles with regards to entrapment efficiency, vesicle size and cumulative percentage released. The optimal formula (TZN-AS 6) consisting of 20 mg TZN, 50 mg ascorbyl palmitate (AP), 50 mg cholesterol (CH) and 50 mg Span 60, represented well dispersed spherical vesicles in the nanorange sizes and exhibited excellent stability under different storage conditions. Ex-vivo permeation studies using excised rat skin showed a 4.4-fold increase of the steady state flux in comparison to the unformulated drug (p < 0.05). The pharmacokinetic parameters obtained from the in-vivo study using Wistar rats, showed that the bioavailability of TZN was enhanced significantly (p < 0.05) when compared to the oral market product of TZN, Sirdalud®. Moreover, skin irritancy tests confirmed that the vesicles were non-invasive and safe for the skin. Based on the results obtained, the optimised aspasomes formula represents a promising Nano platform for TZN to be administered transdermally, thus improving the therapeutic efficacy of this important muscle relaxant.

Evaluation of bilosomes as nanocarriers for transdermal delivery of tizanidine hydrochloride: in vitro and ex vivo optimization.

Bilosomes were developed in order to investigate their efficacy as nanocarriers for transdermal delivery of Tizanidine HCl (TZN), a skeletal muscle relaxant with low oral bioavailability. Full factorial experimental design consisting of 27 combinations was generated to study the effects of surfactant type, surfactant-to-cholesterol ratio and the amount of bile salt on the entrapment efficiency (EE), the vesicle size (VS) and in vitro dissolution of the TZN-loaded bilosomes. The permeation through the stratum cornea was optimized with the vertical diffusion assembly using excised rat skin. The permeation parameters of the selected bilosomes were compared to the unformulated drug and it was shown that TZN-B24 exhibited the highest enhancement ratio (ER = 8.8).The optimal formula (TZN-B24) consisting of span 60 in a ratio with cholesterol of 1:1 and 20 mg of bile salt was obtained by employing the desirability function of Design-Expert® software. The mathematical model used for the optimization was validated by comparing the predicted values of the EE (82.3%) and the VS (165.8 nm) with the experimental values of EE = 84.42% and of VS = 161.95 nm. TZN-B24 displayed high zeta potential which contributed to its good stability. It was evident from the results of this study that incorporating TZN in bilosomes improved significantly its permeation through the skin barrier and thus bilosomes can offer a potential nanoplatform using the transdermal route to improve the bioavailability of the drug.

Design and evaluation of proniosomes as a carrier for ocular delivery of lomefloxacin HCl.

The current investigation aims to develop and evaluate novel ocular proniosomal gels of lomefloxacin HCl (LXN); in order to improve its ocular bioavailability for the management of bacterial conjunctivitis. Proniosomes were prepared using different types of nonionic surfactants solely and as mixtures with Span 60. The formed gels were characterized for entrapment efficiency, vesicle size, and in vitro drug release. Only Span 60 was able to form stable LXN-proniosomal gel when used individually while the other surfactants formed gels only in combination with Span 60 at different ratios. The optimum proniosomal gel; P-LXN 7 (Span 60:Tween 60, 9:1) appeared as spherical shaped vesicles having high entrapment efficiency (>80%), appropriate vesicle size (187 nm) as well as controlled drug release over 12 h. Differential scanning calorimetry confirmed the amorphous nature of LXN within the vesicles. Stability study did not show any significant changes in entrapment efficiency or vesicle size after storage for 3 months at 4 °C. P-LXN 7 was found to be safe and suitable for ocular delivery as proven by the irritancy test. The antibacterial activity of P-LXN 7 evaluated using the susceptibility test and topical therapy of induced ocular conjunctivitis confirmed the enhanced antibacterial therapeutic efficacy of the LXN-proniosomal gel compared to the commercially available LXN eye drops.

Enhancement of lomefloxacin Hcl ocular efficacy via niosomal encapsulation: in vitro characterization and in vivo evaluation.

The aim of this study is to develop and evaluate niosomal dispersions loaded with the hydrophilic drug; lomefloxacin Hcl (LXN) for the management of ocular bacterial conjunctivitis. LXN-loaded niosomes were prepared by the thin film hydration method following a full factorial formulation design. Two independent variables were evaluated: the type of surfactant (X1) and the surfactant:cholesterol ratio (X2). The dependent variables comprised entrapment efficiency (EE%: Y1), particle size (PS: Y2) and zeta potential (ZP: Y3). The optimum formulation, N-LXN14 (Tw60: CH, 1:1), was spherical in shape and exhibited EE% of 68.41 ± 0.07, PS of 176.0 ± 0.98 and ZP of -40.70 ± 2.20 with a sustained release profile over 8 hours following the Higuchi model. N-LXN14 proved good physicochemical stability under refrigeration up to 3 months. Ocular irritancy test showed no signs of ocular toxicity, confirming the safety and suitability for ocular application. Microbiological evaluation of the antibacterial effect of N-LXN14 was conducted using the susceptibility test and through the induction of topical conjunctivitis by Staphylococcus aureus (S. aureus) followed by topical therapy. Susceptibility test manifested significantly higher percent inhibition of S. aureus and higher AUC0-12 h of N-LXN14 (604.59 ± 0.05) compared to the commercial product (126.25 ± 0.049). Both clinical observation and colony count of the infected eyes after eight days of treatment demonstrated significant improvement in therapeutic response. The infected eyes were completely healed with eradication of S. aureus. In conclusion, the results showed that LXN niosomal dispersions may serve as a promising superior ocular delivery system in the treatment of bacterial conjunctivitis.

Utilization of ionotropic gelation technique for bioavailability enhancement of cinnarizine: in-vitro optimization and in-vivo performance in human.

Gastro retentive drug delivery system techniques were adopted to deliver drugs having narrow absorption window from a particular site in the GIT. Therefore, gastro retentive dosage forms were retained in the stomach, thus improving absorption and bioavailability would be improved consequently. In this study, cinnarizine (CNZ) was employed as the model drug. CNZ is a poorly soluble basic drug, suffering from low and erratic bioavailability. This is attributed to its pH-dependant solubility (highly soluble at pH < 4). CNZ is characterized by short half-life (3-6 h). Accordingly, floating CNZ emulsion gel calcium pectinate beads were developed. A mixture design was employed to study the effect of the percent of LM pectin (A), the percent of GMO (B) and the percent of Labrafac Lipophile (C) simultaneously on the percent of drug released and loaded. The optimized floating CNZ emulsion gel calcium pectinate beads and Stugeron® (the marketed reference product) were compared through a pharmacokinetic study carried on healthy human volunteers. Fortunately, simple floating CNZ emulsion gel calcium pectinate beads were prepared with zero-order release profile for 12 h. A promising in-vivo CNZ controlled release dosage form with higher bioavailability, when compared to once daily administration of Stugeron® tablets was achieved.

Baclofen novel gastroretentive extended release gellan gum superporous hydrogel hybrid system: in vitro and in vivo evaluation.

Baclofen is a centrally acting skeletal muscle relaxant with a short elimination half-life, which results in frequent daily dosing and subsequent poor patient compliance. The narrow absorption window of baclofen in the upper gastrointestinal tract limits its formulation as extended release dosage forms. In this study, baclofen extended release superporous hydrogel (SPH) systems, including conventional SPH, SPH composite and SPH hybrid (SPHH), were prepared aiming to increase the residence of baclofen at its absorption window. The applicability of different polymers, namely, gellan gum, guar gum, polyvinyl alcohol and gelatin, was investigated in preparation of SPHH systems. The prepared SPH systems were evaluated regarding weight and volume swelling ratio, porosity, mechanical properties, incorporation efficiency, degree of erosion and drug release. In vivo assessment was performed in dogs to evaluate gastric residence time by X-ray studies. In addition, the oral bioavailability of baclofen relative to commercially available Lioresal® immediate release tablets was also investigated. The novel baclofen gellan SPHH cross linked with calcium chloride was characterized by optimum mechanical properties, acceptable swelling properties as well as extended drug release. It also exhibited a prolonged plasma profile when compared to twice daily administered Lioresal®.

Floating lipid beads for the improvement of bioavailability of poorly soluble basic drugs: in-vitro optimization and in-vivo performance in humans.

The challenge in developing oral drug delivery systems of poorly soluble basic drugs is primarily due to their pH dependent solubility. Cinnarizine (CNZ), a model for a poorly soluble basic drug, has pH dependent solubility; where it dissolves readily at low pH in the stomach and exhibits a very low solubility at pH values greater than 4. It is also characterized by a short half life of 3-6h, which requires frequent daily administration resulting in poor patient compliance. In an attempt to solve these problems, extended release floating lipid beads were formulated. A 2(4) full factorial design was utilized for optimization of the effects of various independent variables; lipid:drug ratio, % Pluronic F-127, % Sterotex, and Gelucire 43/01:Gelucire 50/13 ratio, on the loading efficiency and release of CNZ from the lipid beads. In-vivo pharmacokinetic study of the optimized CNZ-lipid beads compared to Stugeron® (reference standard) was performed in healthy human volunteers. A promising approach for enhancing the bioavailability of the poorly soluble basic drug, CNZ, utilizing novel and simple floating lipid beads was successfully developed. Zero order release profile of CNZ was achieved for 12h. Mean AUC0-24 and AUC0-∞ of the optimized CNZ-loaded lipid beads were 4.23 and 6.04 times that of Stugeron® tablets respectively.

Nanostructured lipid carriers (NLCs) versus solid lipid nanoparticles (SLNs) for topical delivery of meloxicam.

OBJECTIVE: The aim of this study was to develop nanostructured lipid carriers (NLCs) as well as solid lipid nanoparticles (SLNs) and evaluate their potential in the topical delivery of meloxicam (MLX). MATERIALS AND METHODS: The effect of various compositional variations on their physicochemical properties was investigated. Furthermore, MLX-loaded lipid nanoparticles-based hydrogels were formulated and the gels were evaluated as vehicles for topical application. RESULTS AND DISCUSSION: The results showed that NLC and SLN dispersions had spherical shapes with an average size between 215 and 430 nm. High entrapment efficiency was obtained ranging from 61.94 to 90.38% with negatively charged zeta potential in the range of -19.1 to -25.7 mV. The release profiles of all formulations exhibited sustained release characteristics over 48 h and the release rates increased as the amount of liquid lipid in lipid core increased. Finally, Precirol NLC with 50% Miglyol® 812 and its corresponding SLN were incorporated in hydrogels. The gels showed adequate pH, non-Newtonian flow with shear-thinning behavior and controlled release profiles. The biological evaluation revealed that MLX-loaded NLC gel showed more pronounced effect compared to MLX-loaded SLN gel. CONCLUSION: It can be concluded that lipid nanoparticles represent promising particulate carriers for topical application.