ABSTRACT
Background: Sleep is a critical factor in maintaining good health, and its impact on various diseases has been recognized by scientists. Understanding sleep patterns and quality is crucial for investigating sleep-related disorders and their potential links to health conditions. The development of non-intrusive and contactless methods for analyzing sleep data is essential for accurate diagnosis and treatment. Methods: A novel system called the sleep visual analyzer (VSleep) was designed to analyze sleep movements and generate reports based on changes in body position angles. The system utilized camera data without requiring any physical contact with the body. A Python graphical user interface (GUI) section was developed to analyze body movements during sleep and present the data in an Excel format. To evaluate the effectiveness of the VSleep system, a case study was conducted. The participants' movements during daytime naps were recorded. The study also examined the impact of different types of news (positive, neutral, and negative) on sleep patterns. Results: The system successfully detected and recorded various angles formed by participants' bodies, providing detailed information about their sleep patterns. The results revealed distinct effects based on the news category, highlighting the potential impact of external factors on sleep quality and behaviors. Conclusions: The sleep visual analyzer (VSleep) demonstrated its efficacy in analyzing sleep-related data without the need for accessories. The VSleep system holds great potential for diagnosing and investigating sleep-related disorders. The proposed system is affordable, easy to use, portable, and a mobile application can be developed to perform the experiment and prepare the results.
Subject(s)
Sleep Wake Disorders , Sleep , HumansABSTRACT
Preparation of a lead-free system (Ba0.8Ca0.2)TiO3-xBi(Mg0.5Ti0.5)O3 (BCT-BMT) with x = 0, 0.1, 0.2, 0.3, 0.4, and 0.5 was carried out using a solid-state reaction technique. X-ray (XRD) diffraction analysis confirmed a tetragonal structure for x = 0, which shifted to cubic (pseudocubic) at x ≥ 0.1. From Rietveld refinement, a single phase with a tetragonal symmetry model (P4mm) was observed for x = 0, and however, for sample x = 0.1 and sample x = 0.5, the data are modeled to cubic (Pm3m). Composition x = 0 showed a prominent Curie peak, typical of ordinary ferroelectrics with a Curie temperature (Tc) â¼130 °C, modified to a typical relaxor dielectric at x ≥ 0.1. However, samples at x = 0.2-0.5 displayed a single semicircle attributed to the bulk response of the material, whereas a slightly depressed second arc appeared for x = 0.5 at 600 °C, indicating a slight contribution to the electrical properties, ascribed to the grain boundary of the material. Finally, the dc resistivity increased with the increase of the BMT content and the solid solution increased the activation energy from 0.58 eV at x = 0 to 0.99 eV for x = 0.5. Adding the BMT content eliminated the ferroelectric behavior at compositions x ≥ 0.1 and led to a linear dielectric response and electrostrictive behavior with a maximum strain of 0.12% for x = 0.2.
ABSTRACT
(Bi1-x La x )FeO3 (0.00 ≤ x ≤ 0.06) ceramics have been synthesized through a mixed oxide route to investigate their structural, morphological, optical, dielectric, and magnetic properties. All the samples are revealed to be in rhombohedral structures along with the R3c space group and 161 space group number. A high relative permittivity and the lowest tangent loss are observed in BLFO samples at the frequency range 1-100 MHz. The optical studies show that the excitation energy increases with the increasing La content. Moreover, the magnetization being strongly affected by crystallite size and microstrain has been investigated. The band gap energy increases with the increasing La content. The overall result of pure and doped La contents in BFO ceramics shows enhanced structural, dielectric, and optical properties.
ABSTRACT
The low-temperature sintering of (Bi0.5Na0.5)TiO3-based ceramics can be achieved by sintering aid CuO. Piezoelectric ceramics (1 - x)[0.90(Bi0.5Na0.5)TiO3 - 0.10SrTiO3] - xCuO (BNT-ST-Cu) with x = 0, 0.01, 0.02, 0.03, and 0.04 were prepared through the mixed oxide route. A tetragonal structure was indexed for the undoped sample. Its structure was found to be changed to a pseudocubic when Cu was added. For undoped Cu samples, the sintering temperature (T s) for sufficient densification was 1160 °C. However, T s was reduced to 1090-1120 °C for Cu-added specimens. Field emission scanning electron microscopy (FE-SEM) showed a uniform and dense grain morphology for all samples. The maximum dielectric constant temperature (T m) was decreased with the doping concentration of Cu and applied frequency. The strain was increased with Cu concentration and had the maximum value of 500 pm/V for the sample x = 0.02 with symmetric and slim strain loops.
