ABSTRACT
The rise of Electric Vehicles (EVs) has introduced significant advancement and evolution in the electricity market. In smart transportation, the EVs have earned more popularity because of its numerous benefits including lower carbon footprints, higher performance, and sophisticated energy trading mechanisms. These potential benefits have resulted in widespread EV adoption across the world. Despite its benefits, energy management remains the biggest challenge in EVs and it is mainly because of the lack of Charging Stations (CSs) near EVs. This creates a demand for an effective, secure and reliable energy management framework for EVs. This study presents a secure data and energy trade paradigm based on Blockchain (BC) in the Internet of EVs (IoEV). BC technology prepares for the high volume of EV integration that serves as the foundation for the next generation, and to assist in developing unique privacy-protected BC-based D-Trading and storage Models. Entities evaluated for the proposed model include Trusted Authority (TA), Vehicles, Smart Meters, Roadside Units (RSU), BC, and Inter-Planetary File System (IPFS). In addition, E-trading involves several phases, including the acquiring E-trading demand requests, E-trading response requests, request matching and token assignment. Moreover, account mapping is performed using a Mayfly Pelican Optimization Algorithm (MPOA), which is created by merging the Mayfly Algorithm (MA) and Pelican Optimization Algorithm (POA). Various security features are used to protect data and energy trade in IoEV, including encryption, hashing, polynomials, and others. The testing results revealed that the MPOA outperformed the state-of-the-art results regarding memory consumption, trading rate, transaction cost, and trading energy volume with values of 4.605 MB, 91%, 0.654, and 90 kW, respectively.
ABSTRACT
Simulation and implementation of a single DC-link-based three-phase inverter are investigated in this article. The primary focus is on designing a single DC-link three-phase inverter for high power applications. Unlike conventional inverters that require 600 V to generate 400 V (RMS) at the output, the proposed system achieves this with only 330 V, facilitated by a 12-terminal 1:1 transformer. The system employs Proportional Integral (PI) and Neural Network (NN) controllers to optimize performance. Various Carrier-Based Pulse Width Modulation (CB-PWM) techniques, including Phase Disposition (PD), Phase Opposition Disposition (POD), and Alternative Phase Opposition Disposition (APOD), are implemented and evaluated based on Total Harmonics Distortion (THD) concerning the Modulation Index (MI) of the inverter. The proposed inverter achieves a THD reduction to 4.8%, demonstrating superior performance compared to recent studies. The system's performance is validated through extensive MATLAB/Simulink simulations and practical implementation using XILINX FPGA software, confirming the efficacy of the proposed design.
ABSTRACT
The transformer mineral oil is generally hydrocarbon-based and is not environmentally friendly, so it holds a significant share in environmental pollution. As an alternative to conventional transformer oil, plant-based insulation oil has been investigated globally in the past few decades. Even though vegetable oils are considered an environmentally viable alternative to mineral oil, the extensive utilization of vegetable oils could create a threat to Indian food security. The present work focuses on using Pongamia Pinnata oil (PPO) as a significant alternative to conventional transformer oil (CTO) in distribution transformers. The effectiveness of the proposed PPO is experimentally verified using thermal studies and electrical studies through a low-level distribution transformer of 1 kVA. A comparative analysis was carried out between the proposed and conventional oil regarding physical, chemical, and thermal properties. Also, scanning electron microscopy (SEM) and Energy Dispersive X-ray spectroscopy analysis have been carried out for fibreglass cloth insulation material with PPO and CTO to ensure the intrinsic structural strength of the insulation material. The structural strength ensures the bonding and life span of the insulation in the transformer. The cost-benefit analysis is also favourable for the proposed oil as a better green liquid dielectric for transformers.
ABSTRACT
Transformer is a well-known power system apparatus utilized in conjunction with solid insulations such as paper and press board, as well as liquid insulations like mineral oil, a petroleum-based fluid. Despite the notable drawbacks associated with mineral oil, such as limited resources for future generations and its non-eco-friendly nature, its usage remains ubiquitous. There is a growing imperative to explore alternative fluids that surpass mineral oil in terms of environmental impact and performance. Amidst the global shift towards green energy, this study focuses on vegetable seed oils such as corn oil, soybean oil, mustard oil, and rice bran oil as potential substitutes. The research evaluates these oils based on key transformer properties including breakdown voltage, water content, interfacial tension, viscosity, acidity, flash point, and fire point. Interestingly, rice bran oil and soybean oil exhibit promising characteristics that suggest they could effectively replace petroleum-based fluids in transformers. Furthermore, the study extends to blending mineral oil with vegetable seed oils in various compositions, incorporating natural and synthetic antioxidant additives ranging from 0 to 1%. Comparative analyses between samples with and without additives reveal that the inclusion of 1% propyl gallate yields outstanding performance improvements. For instance, a blend comprising 25 ml of mineral oil and 25 ml of soybean oil, supplemented with 1% propyl gallate, demonstrates 90% higher effectiveness compared to other blends and additives tested. Moreover, the research employs statistical regression analysis to establish relationships between different parameter variables, providing deeper insights into the performance and compatibility of these blended oils in transformer applications. This comprehensive investigation underscores the potential of vegetable seed oils as viable alternatives to mineral oil, contributing to the advancement of eco-friendly solutions in power systems.
ABSTRACT
The integration of large intelligent surfaces (LIS) with non-orthogonal multiple access (NOMA) networks has emerged as a promising solution to enhance the capacity and coverage of wireless communication systems. In this study, we analyse the performance of a NOMA network with the assistance of LIS. We propose a system model where a base station (BS) equipped with a LIS serves multiple users. The LIS consists of many passive elements that can influence the wireless channel by adjusting the reflection coefficients. We consider a downlink scenario where the BS transmits to multiple users simultaneously using NOMA, and the LIS helps to improve the signal quality and coverage. We additionally evaluate the efficiency of the suggested LIS-assisted NOMA network. In addition, we evaluate the efficiency of the LIS-assisted NOMA network in comparison to conventional NOMA systems that do not utilize LISs. The findings indicate that the LIS has a notable impact on enhancing the system's performance in terms of diversity gain, probability of error, and pairwise error probability (PEP). Moreover, the suggested LIS-assisted NOMA network is shown to be superior to conventional NOMA systems through comparison. These findings offer useful insights into the performance analysis of LIS-assisted NOMA networks. They also serve as inspiration and motivation for future research and development in this new subject, with the potential to revolutionize wireless communication systems.
ABSTRACT
This paper recommends new design for non-isolated semi-quadratic buck/boost converter with two similar structure that includes the following features: (a) the continuous input current has made it reasonable for PV solar applications and reduced the value of the capacitors in the input filter reducing the input ripple as well as EMI problems; (b) the topology is simple, and consists of a few numbers of components; (c) the semiconductor-based components have lower current/voltage stresses in comparison with the recently recommended designs; (d) semi-quadratic voltage gain is D (2 - D) / (1 - D)2; (e) 94.6 percent from the theoretical relations and 91.8 percent from the experimental for the output power of 72W, the duty of 54.2 percent, and output voltage of 72 V are the efficiency values in boost mode; (f) 89.3 percent from the theoretical relations and 87.2 percent from the experimental for the output power of 15W, the duty of 25.8 percent, and output voltage of 15 V are the efficiency values in buck mode. One structure is the continuous output current and negative output polarity, and other structure is positive output polarity. The recommended topologies have been studied in both ideal and non-ideal modes. The continuous current mode (CCM) is the suggested mode for the proposed converters. Moreover, the requirements of CCM have been discussed. The various kinds of comparisons have been held for voltage gain, efficiency, and structural details, and the advantages of the suggested design have been presented. A small-signal analysis has been completed, and the suitable compensator has been planned. Finally, PLECS simulation results have been associated with the design considerations.
ABSTRACT
This paper explores scenarios for powering rural areas in Gaita Selassie with renewable energy plants, aiming to reduce system costs by optimizing component numbers to meet energy demands. Various scenarios, such as combining solar photovoltaic (PV) with pumped hydro-energy storage (PHES), utilizing wind energy with PHES, and integrating a hybrid system of PV, wind, and PHES, have been evaluated based on diverse criteria, encompassing financial aspects and reliability. To achieve the results, meta-heuristics such as the Multiobjective Gray wolf optimization algorithm (MOGWO) and Multiobjective Grasshopper optimization algorithm (MOGOA) were applied using MATLAB software. Moreover, optimal component sizing has been investigated utilizing real-time assessment data and meteorological data from Gaita Sillasie, Ethiopia. Metaheuristic optimization techniques were employed to pinpoint the most favorable loss of power supply probability (LPSP) with the least cost of energy (COE) and total life cycle cost (TLCC) for the hybrid system, all while meeting operational requirements in various scenarios. The Multi-Objective Grey Wolf Optimization (MOGWO) technique outperformed the Multi-Objective Grasshopper Optimization Algorithm (MOGOA) in optimizing the problem, as suggested by the results. Furthermore, based on MOGWO findings, the hybrid solar PV-Wind-PHES system demonstrated the lowest COE (0.126/kWh) and TLCC (6,897,300), along with optimal satisfaction of the village's energy demand and LPSP value. In the PV-Wind-PHSS scenario, the TLCC and COE are 38%, 18%, 2%, and 1.5% lower than those for the Wind-PHS and PV-PHSS scenarios at LPSP 0%, according to MOGWO results. Overall, this research contributes valuable insights into the design and implementation of sustainable energy solutions for remote communities, paving the way for enhanced energy access and environmental sustainability.
ABSTRACT
Economic development relies on access to electrical energy, which is crucial for society's growth. However, power shortages are challenging due to non-renewable energy depletion, unregulated use, and a lack of new energy sources. Ethiopia's Debre Markos distribution network experiences over 800 h of power outages annually, causing financial losses and resource waste on diesel generators (DGs) for backup use. To tackle these concerns, the present study suggests a hybrid power generation system, which combines solar and biogas resources, and integrates Superconducting Magnetic Energy Storage (SMES) and Pumped Hydro Energy Storage (PHES) technologies into the system. The study also thoroughly analyzes the current and anticipated demand connected to the distribution network using a backward/forward sweep load flow analysis method. The results indicate that the total power loss has reached its absolute maximum, and the voltage profiles of the networks have dropped below the minimal numerical values recommended by the Institute of Electrical and Electronics Engineers (IEEE) standards (i.e., 0.95-1.025 p.u.). After reviewing the current distribution network's operation, additional steps were taken to improve its effectiveness, using metaheuristic optimization techniques to account for various objective functions and constraints. In the results section, it is demonstrated that the whale optimization algorithm (WOA) outperforms other metaheuristic optimization techniques across three important objective functions: financial, reliability, and greenhouse gas (GHG) emissions. This comparison is based on the capability of the natural selection whale optimization algorithm (NSWOA) to achieve the best possible values for four significant metrics: Cost of Energy (COE), Net Present Cost (NPC), Loss of Power Supply Probability (LPSP), and GHG Emissions. The NSWOA achieved optimal values for these metrics, namely 0.0812 /kWh, 3.0017 × 106 , 0.00875, and 7.3679 × 106 kg reduced, respectively. This is attributable to their thorough economic, reliability, and environmental evaluation. Finally, the forward/backward sweep load flow analysis employed during the proposed system's integration significantly reduced the impact of new energy resources on the distribution network. This was evident in the reduction of total power losses from 470.78 to 18.54 kW and voltage deviation from 6.95 to 0.35 p.u., as well as the voltage profile of the distribution system being swung between 1 and 1.0234 p.u., which now comply with the standards set by the IEEE. Besides, a comparison of the cost and GHG emission efficiency of the proposed hybrid system with existing (grid + DGs) and alternative (only DGs) scenarios was done. The findings showed that, among the scenarios examined, the proposed system is the most economical and produces the least amount of GHG emissions.
ABSTRACT
Decision makers consistently face the challenge of simultaneously assessing numerous attributes, determining their respective importance, and selecting an appropriate method for calculating their weights. This article addresses the problem of automatic generation control (AGC) in a two area power system (2-APS) by proposing fuzzy analytic hierarchy process (FAHP), an multi-attribute decision-making (MADM) technique, to determine weights for sub-objective functions. The integral-time-absolute-errors (ITAE) of tie-line power fluctuation, frequency deviations and area control errors, are defined as the sub-objectives. Each of these is given a weight by the FAHP method, which then combines them into an single final objective function. This objective function is then used to design a PID controller. To improve the optimization of the objective function, the Jaya optimization algorithm (JOA) is used in conjunction with other optimization techniques such as sine cosine algorithm (SCA), Luus-Jaakola algorithm (LJA), Nelder-Mead simplex algorithm (NMSA), symbiotic organism search algorithm (SOSA) and elephant herding optimization algorithm (EHOA). Six distinct experimental cases are conducted to evaluate the controller's performance under various load conditions, with data plotted to show responses corresponding to fluctuations in frequency and tie-line exchange. Furthermore, statistical analysis is performed to gain a better understanding of the effectiveness of the JOA-based PID controller. For non-parametric evaluation, Friedman rank test is also used to validate the performance of the proposed JOA-based controller.
ABSTRACT
The present power generation government companies focus on Renewable Power Sources (RPS) because their features are zero carbon footprint, unlimited power source, fewer greenhouse pollutants, fewer output wastages, plus creatinga very healthy atmosphere. In this work, the sunlight source is utilized for the Photovoltaic (PV) standalone network. The merits of sunlight sources are very optimal human resources needed, unlimited natural sources, plus easy operation. However, the solar power resource is nonlinear fashion. As a result, the operating point of the sunlight network fluctuates concerning sunlight intensity. So, in this article, the Modified Grey Wolf Methodology with Adaptive Fuzzy Logic Controller (MGWM-AFLC) is introduced to maintain the operating point of the sunlight system at the global power point position of the PV array. This controller traces the MPP with very low fluctuations in the PV-produced voltage. The advantages of this proposed method arefewer sensing devices required, less difficulty in development, more useful for rapid changes inthe sunlight temperatures, simpler to realize operation, greater economic growth, plus highly useful for household applications. The sunlight set-up generation voltage is lowwhich is improved by introducing the new Wide Power Rating High Voltage DC-DC Boost Converter (WPRHVBC). The features of this WPRHV converter are low voltage strain on semiconductor devices, few passive elements are enough to develop the circuit, plus easy understanding.
ABSTRACT
In a DFIG grid interconnected system, the control of real and reactive power relies on various factors. This paper presents an approach to regulate the flow of real and reactive power using a Neural Tuning Machine (NTM) based on a recurrent neural network. The focus is on controlling the flow of reactive power from the rotor-side converter, which is proportional to the grid-side controller through a coupling voltage. The proposed NTM method leverages neural networks to fine-tune the parameters of the PI controller, optimizing performance for DFIG grid integration. By integrating dense plexus terminals, also known as dense connections, within the neural network, the control system achieves enhanced adaptability, robustness, and nonlinear dynamics, addressing the challenges of the grid. Grid control actions are based on the voltage profile at different bus locations, thereby regulating voltage. This article meticulously examines the analysis in terms of DFIG configuration and highlights the advantages of the neural tuning machine in controlling inner current loop parameters compared to conventional PI controllers. To demonstrate the robustness of the control algorithm, a MATLAB Simulink model is designed, and validation is conducted with three different benchmarking models. All calculations and results presented in the article strictly adhere to IEEE and IEC standards. This research contributes to advancing control methodologies for DFIG grid integration and lays the groundwork for further exploration of neural tuning methods in power system control.
ABSTRACT
Traditionally, isolated and non-isolated boost converters are used for solar photovoltaic systems (SPV). These converters have limitations such as low voltage gain, less voltage ripples, temperature dependence, high voltage stress across the switches, and being bulky in size. Besides, the solar PV system also has non-linear characteristics between I-V and P-V, and the energy yield potential is affected by partial shading phenomena. Therefore, maximum power point tracking (MPPT) is being added to the SPV system to get the maximum output power under steady and dynamic climate conditions. Although the conventional MPPT has drawbacks such as less accuracy in predicting the MPP under partial shading conditions, low tracking speed, and more ripples, Hence, the research proposes a stackable single switch boost converter (SSBC) with a Cuckoo search MPPT controller for the SPV system. The efficiency of the proposed circuit topology has been compared with conventional boost converters with various MPPTs. Subsequently, the accuracy of tracking true MPPT by CSO is compared with that of PSO and FPNA. The results show, that the CMPPT with CBC has produced more ripples, whereas the BMPPT with SSBC produces ripple-free power under steady conditions. It is also observed that SSBC with BMPPT produces more power than SSBC with TMPPT. The efficiency of SSBC with BMPPT is better than other combinations. Finally, a prototype model has been developed and verified.
ABSTRACT
A comprehensive examination of human action recognition (HAR) methodologies situated at the convergence of deep learning and computer vision is the subject of this article. We examine the progression from handcrafted feature-based approaches to end-to-end learning, with a particular focus on the significance of large-scale datasets. By classifying research paradigms, such as temporal modelling and spatial features, our proposed taxonomy illuminates the merits and drawbacks of each. We specifically present HARNet, an architecture for Multi-Model Deep Learning that integrates recurrent and convolutional neural networks while utilizing attention mechanisms to improve accuracy and robustness. The VideoMAE v2 method ( https://github.com/OpenGVLab/VideoMAEv2 ) has been utilized as a case study to illustrate practical implementations and obstacles. For researchers and practitioners interested in gaining a comprehensive understanding of the most recent advancements in HAR as they relate to computer vision and deep learning, this survey is an invaluable resource.
Subject(s)
Deep Learning , Humans , Neural Networks, Computer , Human ActivitiesABSTRACT
The impacts of climate change, combined with the depletion of fossil fuel reserves, are forcing human civilizations to reconsider the design of electricity generation systems to gradually and extensively incorporate renewable energies. This study aims to investigate the technical and economic aspects of replacing all heavy fuel oil (HFO) and light fuel oil (LFO) thermal power plants connected to the electricity grid in southern Cameroon. The proposed renewable energy system consists of a solar photovoltaic (PV) field, a pumped hydroelectric energy storage (PHES) system, and an ultra-capacitor energy storage system. The economic and technical performance of the new renewable energy system was assessed using metrics such as total annualized project cost (TAC), loss of load probability (LOLP), and loss of power supply probability (LPSP). The Multi-Objective Bonobo Optimizer (MOBO) was used to both size the components of the new renewable energy system and choose the best location for the solar PV array. The results achieved using MOBO were superior to those obtained from other known optimization techniques. Using metaheuristics for renewable energy system sizing necessitated the creation of mathematical models of renewable energy system components and techno-economic decision criteria under MATLAB software. Based on the results for the deficit rate (LPSP) of zero, the installation of the photovoltaic field in Bafoussam had the lowest TAC of around 52.78 × 106 when compared to the results for Yaoundé, Bamenda, Douala, and Limbe. Finally, the project profitability analysis determined that the project is financially viable when the energy produced by the renewable energy systems is sold at an average price of 0.12 /kWh.
ABSTRACT
Cybersecurity is critical in today's digitally linked and networked society. There is no way to overestimate the importance of cyber security as technology develops and becomes more pervasive in our daily lives. Cybersecurity is essential to people's protection. One type of cyberattack known as "credential stuffing" involves using previously acquired usernames and passwords by attackers to access user accounts on several websites without authorization. This is feasible as a lot of people use the same passwords and usernames on several different websites. Maintaining the security of online accounts requires defence against credential-stuffing attacks. The problems of credential stuffing attacks, failure detection, and prediction can be handled by the suggested EWOA-ANN model. Here, a novel optimization approach known as Enhanced Whale Optimization Algorithm (EWOA) is put on to train the neural network. The effectiveness of the suggested attack identification model has been demonstrated, and an empirical comparison will be carried out with respect to specific security analysis.
ABSTRACT
This work develops a hybrid active power filter (HAPF) in this article to operate in conjunction with the energy storage system (ESS), wind power generation system (WPGS), and solar energy system (SES). It employs three level shunt voltage source converters (VSC) connected to the DC-bus. Optimization of the gain values of the fractional-order proportional integral derivative controller (FOPIDC) and parameter values of the HAPF is achieved using the Jaya grey wolf hybrid algorithm (GWJA). The primary objectives of this study, aimed at enhancing power quality (PQ), include: (1) ensuring swift stabilization of DC link capacitor voltage (DCLCV); (2) reducing harmonics and improving power factor (PF); (3) maintaining satisfactory performance under different combinations of loads like EV charging load, non linear load and solar irradiation conditions. The proposed controller's performance is evaluated through three test scenarios featuring different load configurations and irradiation levels. Additionally, the HAPF is subjected to design using other optimization algorithms such as genetic algorithm (GA), particle swarm optimization (PSO), and ant colony optimization (ACO) to assess their respective contributions to PQ improvement.
ABSTRACT
This work presents an energy management scheme (EMS) based on a rule-based grasshopper optimization algorithm (RB-GOA) for a solar-powered battery-ultracapacitor hybrid system. The main objective is to efficiently meet pulsed load (PL) demands and extract maximum energy from the photovoltaic (PV) array. The proposed approach establishes a simple IF-THEN set of rules to define the search space, including PV, battery bank (BB), and ultracapacitor (UC) constraints. GOA then dynamically allocates power shares among PV, BB, and UC to meet PL demand based on these rules and search space. A comprehensive study is conducted to evaluate and compare the performance of the proposed technique with other well-known swarm intelligence techniques (SITs) such as the cuckoo search algorithm (CSA), gray wolf optimization (GWO), and salp swarm algorithm (SSA). Evaluation is carried out for various cases, including PV alone without any energy storage device, variable PV with a constant load, variable PV with PL cases, and PV with maximum power point tracking (MPPT). Comparative analysis shows that the proposed technique outperforms the other SITs in terms of reducing power surges caused by PV power or load transition, oscillation mitigation, and MPP tracking. Specifically, for the variable PV with constant load case, it reduces the power surge by 26%, 22%, and 8% compared to CSA, GWO, and SSA, respectively. It also mitigates oscillations twice as fast as CSA and GWO and more than three times as fast as SSA. Moreover, it reduces the power surge by 9 times compared to CSA and GWO and by 6 times compared to SSA in variable PV with the PL case. Furthermore, its MPP tracking speed is approximately 29% to 61% faster than its counterparts, regardless of weather conditions. The results demonstrate that the proposed EMS is superior to other SITs in keeping a stable output across PL demand, reducing power surges, and minimizing oscillations while maximizing the usage of PV energy.
ABSTRACT
Solar Photovoltaic (SPV) technology advancements are primarily aimed at decarbonizing and enhancing the resiliency of the energy grid. Incorporating SPV is one of the ways to achieve the goal of energy efficiency. Because of the nonlinearity, modeling of SPV is a very difficult process. Identification of variables in a lumped electric circuit model is required for accurate modeling of the SPV system. This paper presents a new state-of-the-art control technique based on human artefacts dubbed Drone Squadron Optimization for estimating 15 parameters of a three-diode equivalent model solar PV system. The suggested method simulates a nonlinear relationship between the P-V and I-V performance curves, lowering the difference between experimental and calculated data. To evaluate the adaptive performance in every climatic state, two different test cases with commercial PV cells, RTC France and photo watt-201, are used. The proposed method provides a more accurate parameter estimate. To validate the recommended approach's performance, the data are compared to the results of the most recent and powerful methodologies in the literature. For the RTC and PWP Photo Watt Cell, the DSO technique has the lowest Root Mean Square Error (RMSE) of 6.7776 × 10-4 and 0.002310324 × 10-4, respectively.
ABSTRACT
The main objective of this study is to develop a new method for solving the techno-economic optimization problem of an isolated microgrid powered by renewable energy sources like solar panels, wind turbines, batteries, and diesel generators while minimizing greenhouse gas emissions. An Improved Salp Swarm Algorithm (ISSA) with a position adaptation mechanism for the salp leader that involves a leader salp that moves about depending on both food availability and its previous position has been proposed to overcome the convergence problem. In the original SSA, as the approach converges, it can no longer find optimal solutions and becomes trapped in a local minimum. Three Microgrid System (MS) configurations are discussed: PV/WT/BESU/DG, PV/BESU/DG, and WT/BESU/DG. The proposed method seeks to find a middle ground between technical criteria and environmental concerns when deciding on PV, WT, BESU, and DG sizes. The findings indicate that the proposed ISSA approach gives superior results compared to other well-known algorithms like the original SSA, the Ant Lion Optimizer (ALO), the Dragonfly Approach (DA), and the Moth-Flame Optimization Algorithm (MFO), which, after significant investigation, has been proven to help determine the appropriate microgrid size. With PV sizes of 10, 9 WT, 24 BESU, and 3 DG, the PV/WT/BESU/DG configuration offers the highest level of cost-effectiveness with Cost of Energy (COE) of 0.2109 $/kWh, Net Present Cost (NPC) of 376,063.8 $, Loss of Power Supply Probability (LPSP) of 4%, Renewable Energy Fraction (REF) of 96%, and CO2 emission of 12.4457 tons/year. ISSA is brought up as a possible solution to both the problem of rising energy prices and the difficulties inherent in microgrid design.
ABSTRACT
This paper introduces DGS-SCSO, a novel optimizer derived from Sand Cat Swarm Optimization (SCSO), aiming to overcome inherent limitations in the original SCSO algorithm. The proposed optimizer integrates Dynamic Pinhole Imaging and Golden Sine Algorithm to mitigate issues like local optima entrapment, premature convergence, and delayed convergence. By leveraging the Dynamic Pinhole Imaging technique, DGS-SCSO enhances the optimizer's global exploration capability, while the Golden Sine Algorithm strategy improves exploitation, facilitating convergence towards optimal solutions. The algorithm's performance is systematically assessed across 20 standard benchmark functions, CEC2019 test functions, and two practical engineering problems. The outcome proves DGS-SCSO's superiority over the original SCSO algorithm, achieving an overall efficiency of 59.66% in 30 dimensions and 76.92% in 50 and 100 dimensions for optimization functions. It also demonstrated competitive results on engineering problems. Statistical analysis, including the Wilcoxon Rank Sum Test and Friedman Test, validate DGS-SCSO efficiency and significant improvement to the compared algorithms.