Nanoscale mapping of residual stresses in Al 2024 alloys using correlative and multimodal scanning transmission electron microscopy.

A methodology for the mapping of residual stresses in metal alloys has been developed by analyzing an isotropic and homogeneous Al2024 alloy with scanning transmission electron microscopy (STEM), combined with diffraction (4DSTEM) and electron energy loss spectroscopy (STEM-EELS) techniques of TEM. The investigations on the alloy's microstructure and elemental distributions were also carried out with conventional dark-field STEM (DFSTEM) and X-ray energy dispersive (EDS) techniques, respectively. Using the STEM-EELS technique, the Young's modulus (YM) is mapped in the (001) plane of the Al alloy in the same regions where the residual strain maps are generated in [1‾ 00] and [010] directions by using 4DSTEM technique. The YM vs. residual strain plot for the Al 2024 alloy revealed that the value of YM decreased by about ∼ 7 % after the tensile residual strain reached 0.02 %. Whereas such a decrease in YM happens after the compressively residual strain reaches -0.015 %. The residual stress maps were also obtained in accordance with the Hooke's law i.e., by multiplying YM map with the corresponding residual strain maps.

An In-Vitro Comparison of Steady State Leakage Rates through Introducer Sheaths Used for Fenestrated Endovascular Aortic Aneurysm Repair.

BACKGROUND: Fenestrated Endovascular Aneurysm Repair (fEVAR) involves deploying a covered stent into the aorta followed by multiple visceral stents through fenestrations in the main body of graft. The most commonly used large sheaths for cannulation of visceral vessels are the Gore DrySeal Flex, Cook Performer Check-Flo, and Medtronic Sentrant. None of these sheaths were designed for the insertion of multiple sheaths, and so a slow but steady leakage of blood occurs during the procedure. The aim of this paper is to assess in an in vitro setting which large bore sheath has the best valve for use when multiple smaller sheaths are inserted through it. METHODS: Three large bore introducer sheaths (LBISs) were used for this study, The Gore DrySeal Flex LBIS, Medtronic Sentrant LBIS and Cook Performer Check-Flo LBIS. A test rig was constructed, made of an 18-liter fluid reservoir mounted vertically and receiving a constant supply of water from a domestic water supply which flowed into the reservoir and out of an overflow. The reservoir was connected to the LBIS by a vertical plastic pipe with an internal diameter of 40 mm and an isolation valve. The LBIS was connected to the isolation valve by inserting the LBIS up a flexible silicone tube connected to the isolation valve. The LBIS was subject to a constant column/pressure of water and fluid leakage from the LBIS was collected in a plastic pot/tray placed underneath the LBIS. The leakage rates through each LBIS were determined for the following smaller diameter sheath combinations inserted through the valve, one 6 French Sheath, two 6 French Sheaths, two 6 French Sheaths and one 7 French Sheath. This was done to closely mimic a fEVAR procedure in vitro. The procedure was to insert different sheath combinations through the nonreturn valves in the LBIS and measure the volume of fluid that leaked through the valves. The leaked fluid was weighed, and the weight was converted to volume using the density of water (1 g/ml). RESULTS: The average (mean) leakage rates for each LBIS and each sheath combination showed that leakage rates when only one sheath was inserted were very low. For all 3 LBIS's tested, the leakage rates increased dramatically when multiple sheaths were inserted. The Medtronic LBIS leaked the most, followed by Cook, followed by Gore. For the Cook LBIS, the leakage rates exhibited with 2 × 6 French sheaths were approx. 106 times greater than those for the Gore LBIS and 5 times greater for the 2 × 6 French +1 × 7 French sheath combination. A similar comparison for the Medtronic LBIS versus the Gore LBIS yields factors of 132 and 8. CONCLUSIONS: Leakage rates increase significantly when multiple sheaths are inserted and the Gore LBIS demonstrates significantly lower leakage than both the Cook and Medtronic during procedures that require simultaneous, multiple insertions of smaller sheaths. Although the Gore Dryseal has by far the lowest leakage rate when 3 small diameter sheaths are inserted (just under 1 ml/s), depending on the duration of the procedure this could still result in significant blood loss.

Effect of stocking density on performance, survival and nutrient composition of super worm Zophobas Morio (Coleoptera:Tenebrionidae).

As the global demand for animal protein continues to increase, the need for sustainable and resource-efficient alternatives for animal feed becomes increasingly paramount. Insects have gained significant attention as promising candidates to support the sustainable development of the feed industry, and their utilization in animal feed has seen substantial growth in recent years. Therefore, this study was conducted to optimize the superworm (Zophobas morio) larvae rearing stocking density on the biomass production, survival, and nutrient composition. Two-weeks-old Z. morio larvae were maintained at 25 ± 2 oC and 70% relative humidity, and at densities of 0.5, 0.75, 1 and 1.25 cm2 space per larva, respectively. The insects reared with a density of 1.25 cm2 per larvae had higher feed intake (FI) and weight gain (WG) (P < 0.05). However, better feed conversion efficiency (FCE) was recorded with a density of 0.75 cm2 per larvae (P < 0.05). The survival significantly increased with increasing the density per larvae (P < 0.05). High survival of Z. morio larvae was recorded at density of 1 and 1.25 cm2 per larvae. The dry matter and fat contents of Z. morio larvae were higher at density of 0.5 cm2 per larvae (P < 0.05). However, the protein content was higher at density of 1 and 1.25 cm2 per larvae (P < 0.05). Moreover, the ash content was higher at 0.5, 0.75, and 1.25 cm2 per larvae (P < 0.05). This study highlights that Z. morio larvae rearing stocking density has a profound influence on growth performance, survival and its nutrient composition.

Inorganic nitrate benefits contrast-induced nephropathy after coronary angiography for acute coronary syndromes: the NITRATE-CIN trial.

BACKGROUND AND AIMS: Contrast-induced nephropathy (CIN), also known as contrast-associated acute kidney injury (CA-AKI) underlies a significant proportion of the morbidity and mortality following coronary angiographic procedures in high-risk patients and remains a significant unmet need. In pre-clinical studies inorganic nitrate, which is chemically reduced in vivo to nitric oxide, is renoprotective but this observation is yet to be translated clinically. In this study, the efficacy of inorganic nitrate in the prevention of CIN in high-risk patients presenting with acute coronary syndromes (ACS) is reported. METHODS: NITRATE-CIN is a double-blind, randomized, single-centre, placebo-controlled trial assessing efficacy of inorganic nitrate in CIN prevention in at-risk patients presenting with ACS. Patients were randomized 1:1 to once daily potassium nitrate (12 mmol) or placebo (potassium chloride) capsules for 5 days. The primary endpoint was CIN (KDIGO criteria). Secondary outcomes included kidney function [estimated glomerular filtration rate (eGFR)] at 3 months, rates of procedural myocardial infarction, and major adverse cardiac events (MACE) at 12 months. This study is registered with ClinicalTrials.gov: NCT03627130. RESULTS: Over 3 years, 640 patients were randomized with a median follow-up of 1.0 years, 319 received inorganic nitrate with 321 received placebo. The mean age of trial participants was 71.0 years, with 73.3% male and 75.2% Caucasian; 45.9% had diabetes, 56.0% had chronic kidney disease (eGFR <60 mL/min) and the mean Mehran score of the population was 10. Inorganic nitrate treatment significantly reduced CIN rates (9.1%) vs. placebo (30.5%, P < .001). This difference persisted after adjustment for baseline creatinine and diabetes status (odds ratio 0.21, 95% confidence interval 0.13-0.34). Secondary outcomes were improved with inorganic nitrate, with lower rates of procedural myocardial infarction (2.7% vs. 12.5%, P = .003), improved 3-month renal function (between-group change in eGFR 5.17, 95% CI 2.94-7.39) and reduced 1-year MACE (9.1% vs. 18.1%, P = .001) vs. placebo. CONCLUSIONS: In patients at risk of renal injury undergoing coronary angiography for ACS, a short (5 day) course of once-daily inorganic nitrate reduced CIN, improved kidney outcomes at 3 months, and MACE events at 1 year compared to placebo.

Formulation and Preparation of Losartan-Potassium-Loaded Controlled-Release Matrices Using Ethocel Grade 10 to Establish a Correlation between In Vitro and In Vivo Results.

In the current study, matrices of losartan potassium were formulated with two different polymers (Ethocel 10 premium and Ethocel 10FP premium), along with a filler and a lubricant, at different drug-to-polymer w/w ratios (10:3, 10:4, and 10:5). The matrices were tested by the direct compression method, and their hardness, diameter, thickness, friability, weight variation, content uniformity, and in vitro dissolution tests were assessed to determine 24-h drug release rates. The matrices with Ethocel 10 FP at a 10:4 ratio exhibited pseudo-zero-order kinetics (n-value of 0.986), while the dissolution data of the test matrices and reference tablets did not match. The new test-optimized matrices were also tested in rabbits, and their pharmacokinetic parameters were investigated: half-life (11.78 ± 0.018 h), Tmax (2.105 ± 1.131 h), Cmax (205.98 ± 0.321 µg/mL), AUCo (5931.10 ± 1.232 µg·h/mL), AUCo-inf (7348.46 ± 0.234 µg·h/mL), MRTo-48h (17.34 ± 0.184 h), and Cl (0.002 ± 0.134 mL/min). A correlation value of 0.985 between the in vitro and in vivo results observed for the test-optimized matrices was observed, indicating a level-A correlation between the percentage of the drug released in vitro and the percentage of the drug absorbed in vivo. The matrices might improve patient compliance with once-a-day dosing and therapeutic outcomes.

Efficacy and safety of fixed dose combination of Sitagliptin, metformin, and pioglitazone in type 2 Diabetes (IMPACT study): a randomized controlled trial.

BACKGROUND: Due to the progressive decline in ß-cell function, it is often necessary to utilize multiple agents with complementary mechanisms of action to address various facets and achieve glycemic control. Thus, this study aimed to evaluate the efficacy and safety of a fixed-dose combination (FDC) of metformin/sitagliptin/pioglitazone (MSP) therapy vs. metformin/sitagliptin (MS) in type 2 diabetes mellitus (T2DM). METHODS: In this phase 3, multicenter, double-blind study, patients with T2DM who exhibited inadequate glycemic control with HbA1c of 8.0-11.0% while taking ≥1500 mg/day metformin for at least 6 weeks were randomized to receive either FDC of MSP (1000/100/15 mg) or MS (1000/100 mg) per day for 24 weeks. The primary outcome measure was the change in HbA1c, and secondary outcomes included changes in fasting plasma glucose (FPG), postprandial plasma glucose (PPG), and body weight from baseline to 24 weeks along with safety and tolerability. RESULTS: Among the 236 patients randomized, 207 (87.71%) successfully completed the study. All baseline characteristics were comparable between the FDC of MSP and MS groups. There was a subsequent significant reduction of HbA1c in FDC of MSP (- 1.64) vs. MS (- 1.32); between groups was [- 0.32% (95% CI, - 0.59, - 0.05)], P = 0.0208. Similar reductions were found in FPG [- 13.2 mg/dL (95% CI, - 22.86, - 3.71)], P = 0.0068, and PPG [- 20.83 mg/dL (95% CI, - 34.11, - 7.55)], P = 0.0023. There were no significant changes in body weight. A total of 27 adverse effects (AEs) and one severe AE were reported, none of which were related to the study drug. CONCLUSION: The FDC of MSP demonstrated significant efficacy in managing glycemic indices and could serve as a valuable tool for physicians in the management of Indian patients with T2DM. TRIAL REGISTRATION: Clinical Trials Registry of India, CTRI/2021/10/037461.

Role of granulocyte colony stimulating factor (G-CSF) in dengue patients with severe thrombocytopenia.

OBJECTIVE: To determine the effects of granulocyte colony-stimulating factor in improving platelet count in patients with dengue fever. METHODS: The retrospective, cross-sectional study was conducted at Northwest General Hospital and Research Centre, Peshawar, Pakistan, between January 2021 and October 2022, and comprised dengue fever inpatients regardless of age and gender who received granulocyte colony-stimulating factor subcutaneously. The impact of colony-stimulating factor on platelet and white blood cell counts as well as any unfavourable consequences was assessed. Convenient sampling was used and a structured format was used for data collection. Data was analysed using SPSS 21. RESULTS: Of the 100 patients, 67(67%) were males and 33(33%) were females. The largest age group was that of >55 years 31(31%), fever was present in all the 100(100%) cases, bleeding in 18(18%) and platelet count <30,000 in 83(83%) cases. Dengue fever was confirmed by rapid dengue nonstructural protein 1 antigen in 76(76%) cases, dengue immunoglobulin G antibody test 28(28%), and immunoglobulin M antibody test in 31(31%) cases. Overall, 72(72%) patients received only one dose of granulocyte colony-stimulating factor. Post-administration, a substantial rise in the median platelet and white blood cell counts was seen compared to the baseline (p<0.05) on day 2. CONCLUSIONS: Granulocyte colony-stimulating factor helped increase platelet and white blood cell counts quickly in dengue fever patients.

Exploring Patient Safety Culture: A Study of Community Pharmacies in Karachi, Pakistan.

Background Community pharmacies are integral to the healthcare system, actively contributing to patient safety through accurate dispensing, education, collaboration, monitoring, and the implementation of safety protocols. Their accessibility and role as medication experts make them key partners in promoting positive health outcomes for individuals and communities. Objective The current study will evaluate the patient safety culture (PSC) among community pharmacies in Karachi, Pakistan. Additionally, this study will measure the association between patient safety culture in community pharmacies and the demographic characteristics of the pharmacy staff. Methods A cross-sectional survey of pharmacy staff was conducted using a survey instrument developed by the US Agency for Healthcare Research and Quality (AHRQ). Demographic variables and assessments of safety culture in pharmacies were studied. The data were analyzed using descriptive statistics. Results Among the 102 participants, positive responses ranged from 30% to 87.5%. The highest positive response was for the dimension "mistakes in communication" (86.3%), followed by "communication across shifts" (82.2%) and "communication openness" (81.7%). The dimensions "overall perceptions of patient safety" and "response to mistakes" had the lowest positive responses (56.0% and 60.9%, respectively). Furthermore, many staff did not regularly record the errors, even if they impacted the practices. Conclusion There was an overall unfavorable perception of patient safety culture among the surveyed pharmacies of Karachi, Pakistan. However, the communication dimensions showed the highest positive response. There is a strong need to improve the overall perception of patient safety among the staff and develop an optimistic response to mistakes.

Leveraging Artificial Intelligence and Digital Health to Address Health-Related Social Needs and Optimize Risk-Based Value in Orthopaedic Surgery.

As the health care landscape evolves toward value-based care and emphasizes health-related social needs, the importance of developing health policies and digital health solutions that foster health equity and risk-based reimbursement strategies has grown. Orthopaedic surgery, catering to a diverse patient population but challenged by a lack of workforce diversity, encounters distinct opportunities and obstacles in adopting digital health technologies for delivering equitable, high-value care. The integration of health-related social needs into the emerging value-based care model and risk-based reimbursement policies is important. Furthermore, the potential of incorporating robust artificial intelligence governance and big data analytics to enhance patient outcomes and support orthopaedic surgeons in treating their patient populations should be studied. There are crucial considerations for creating comprehensive digital health platforms tailored for orthopaedic surgery, and the significance of specialty-specific advocacy and collaboration among clinicians, policymakers, and MedTech companies cannot be understated.

Feasibility of double-blinded, placebo-controlled interventional study for assessing catheter ablation efficacy in persistent atrial fibrillation: Insights from the ORBITA AF feasibility study.

BACKGROUND: To date, there are no randomized, double-blinded clinical trials comparing catheter ablation to DC cardioversion (DCCV) with medical therapy in patients with persistent atrial fibrillation (PersAF). Conducting a large-scale trial to address this question presents considerable challenges, including recruitment, blinding, and implementation. We conducted a pilot study to evaluate the feasibility of conducting a definitive placebo-controlled trial. METHODS: This prospective trial was carried out at Barts Heart Centre, United Kingdom, employing a randomized, double-blinded, placebo-controlled design. Twenty patients with PersAF (duration <2 years) were recruited, representing 10% of the proposed larger trial as determined by a power calculation. The patients were randomized in a 1:1 ratio to receive either PVI ± DCCV (PVI group) or DCCV + Placebo (DCCV group). The primary endpoint of this feasibility study was to evaluate patient blinding. Patients remained unaware of their treatment allocation until end of study. RESULTS: During the study, 35% of patients experienced recurrence of PersAF prior to completion of 12 months follow-up. Blinding was successfully maintained amongst both patients and medical staff. The DCCV group had a trend to higher recurrence and repeat procedure rate compared to the PVI group (recurrence of PersAF 60% vs 30%; p = .07 and repeat procedure 70% vs 40%; p = .4). The quality of life experienced by individuals in the PVI group showed improvement, as evidenced by enhanced scores on the AF specific questionnaire (AF PROMS) (3 [±4] vs 21 [±8]) and SF-12 mental-component raw score (51.4 [±7] vs 43.24 [±15]) in patients who maintained sinus rhythm at 12 months. CONCLUSION: This feasibility study establishes the potential for conducting a blinded, placebo-controlled trial to evaluate the efficacy of PVI versus DCCV in patients with PersAF.

Case report: Navigating the challenges: successful mechanical thrombectomy in a case of persistent primitive hypoglossal artery.

Persistent primitive hypoglossal artery (PPHA) is a highly uncommon abnormal connection between the internal carotid artery (ICA) and vertebral artery (VA), with reported incidences ranging from 0.027 to 0.26%. Attempting endovascular intervention in such cases presents a considerable challenge as it carries a higher risk of embolization and other procedure-related complications that may affect a wide area of the brain. We present a case study involving the utilization of mechanical thrombectomy (MT) to treat an ischemic stroke in the M1 segment of the middle cerebral artery (MCA) despite the presence of PPHA. Performing mechanical thrombectomy in an anomalous vascular connection is feasible; however, it necessitates heightened vigilance, thorough knowledge of the anatomy, and utmost caution.

Preparation and In Vitro Evaluation of Levofloxacin-Loaded Floating Tables Using Various Rate-Controlling Agents.

Floating tablets are a new approach to extending the time a drug is in the stomach to improve therapy outcomes. Floating tablets were formulated with the drug, the polymers hydroxypropyl methylcellulose (HPMC), carboxymethyl cellulose (CMC), and starch, fillers, and lubricants. The tablets were prepared using the direction compression method. The tablets' physical quality control tests were found to be within acceptable limits. The tablets extended drug release up to 12 h and were uniform in their drug contents. The swelling index of the tablets ranged from 60 ± 0.11 to 66 ± 0.14%, and the tablets were less dense than water. The floating lag time (10 ± 0.23 to 16 ± 0.09 s) and total floating time (>12 h) showed good floating behaviors. The kinetic modeling showed that the drug was released from the tablets by pseudo-diffusion, swelling, erosion, or anomalous non-Fickian diffusion. F6 (starch and CMC) showed higher n values (0.994 ± 0.04), exhibiting pseudo-zero-order drug release kinetics compared to those of other tablets. The dissolution data of the test and reference tables were not similar (P > 0.05). In terms of antimicrobial activity, the zones of inhibition of the test F6 tablet powders (5.3 ± 0.08 mm) and the reference tablet powders (5.9 ± 0.13 mm) were found to be significantly similar (P > 0.05). The study concluded that these floating tablets can improve the gastric residence time and therapeutic outcomes.

Infantile Scalp Hemangiomas: Surgical Management and Lessons Learned.

Infantile hemangiomas (IH) are common benign vascular tumors in pediatric patients, often found on the scalp. While most IH naturally regress without intervention, surgical excision becomes necessary when severe anatomic or physiological complications arise. This review examines previously published case studies on pediatric scalp IH excisions, focusing on surgical outcomes and complications. A comprehensive search of the US National Library of Medicine National Institutes of Health (PubMed) database identified 19 relevant case studies. Most patients were female, with a wide age range at the time of excision. Various anatomic locations and sizes of the hemangiomas were observed. The reviewed literature demonstrates that surgical excision of scalp IH can be performed with minimal complications, even for sizable tumors. Successful outcomes and low complication rates highlight the effectiveness of surgical intervention in cases of life-threatening IH sequelae. Further research is warranted to explore optimal timing, techniques, and adjunct therapies for surgical management of scalp IH.

Assessing the global risk of typhoid outbreaks caused by extensively drug resistant Salmonella Typhi.

Since its emergence in 2016, extensively drug resistant (XDR) Salmonella enterica serovar Typhi (S. Typhi) has become the dominant cause of typhoid fever in Pakistan. The establishment of sustained XDR S. Typhi transmission in other countries represents a major public health threat. We show that the annual volume of air travel from Pakistan strongly discriminates between countries that have and have not imported XDR S. Typhi in the past, and identify a significant association between air travel volume and the rate of between-country movement of the H58 haplotype of S. Typhi from fitted phylogeographic models. Applying these insights, we analyze flight itinerary data cross-referenced with model-based estimates of typhoid fever incidence to identify the countries at highest risk of importation and sustained onward transmission of XDR S. Typhi. Future outbreaks of XDR typhoid are most likely to occur in countries that can support efficient local S. Typhi transmission and have strong travel links to regions with ongoing XDR typhoid outbreaks (currently Pakistan). Public health activities to track and mitigate the spread of XDR S. Typhi should be prioritized in these countries.

Projecting the future incidence and burden of dengue in Southeast Asia.

The recent global expansion of dengue has been facilitated by changes in urbanisation, mobility, and climate. In this work, we project future changes in dengue incidence and case burden to 2099 under the latest climate change scenarios. We fit a statistical model to province-level monthly dengue case counts from eight countries across Southeast Asia, one of the worst affected regions. We project that dengue incidence will peak this century before declining to lower levels with large variations between and within countries. Our findings reveal that northern Thailand and Cambodia will show the biggest decreases and equatorial areas will show the biggest increases. The impact of climate change will be counterbalanced by income growth, with population growth having the biggest influence on increasing burden. These findings can be used for formulating mitigation and adaptation interventions to reduce the immediate growing impact of dengue virus in the region.

Thermomechanical Modeling of Material Flow and Weld Quality in the Friction Stir Welding of High-Density Polyethylene.

A thermomechanical model of the friction stir welding (FSW) of high-density polyethylene (HDPE) was developed by incorporating a Coupled Eulerian-Lagrangian (CEL) approach. A Johnson Cook (JC) material model of HDPE was developed through experimentally generated strain-rate- and temperature-dependent stress strain data. Two sets of FSW process parameters with minimum and maximum weld defects were numerically modeled. The numerically calculated temperature distribution, material flow and flash and potential defects were validated and discussed with the experimental results. Tracer particles allowed to visualize the material movement during and after the tool had traversed from the specified region of the workpiece. Both numerical models presented similar maximum temperatures on the upper surface of the workpiece, while the model with high traverse speed and slow rotational speed had narrower shoulder- and heat-affected zones than the slow traverse, high rotational speed model. This contributed to the lack of material flow, hence the development of voids and worm holes in the high traverse speed model. Flash and weld defects were observed in models for both sets of process parameters. However, slow traverse, high rotational speeds exhibited smaller and lesser weld defects than high traverse, slow rotational speeds. The numerical results based on the CEL approach and JC material model were found to be in good agreement with the experimental results.

Reconstruction of Scalp Wounds in Patients With Excoriation Disorder.

Excoriation or skin picking disorder is described as compulsive picking of the skin that cannot be explained by an underlying dermatological condition. There are unfortunately no clear guidelines in the literature for reconstruction of wounds in this patient population. The authors describe the cases of 2 patients with the skin picking disorder who underwent free flap reconstruction for scalp wounds, which were complicated by wound recurrence due to manipulation of the surgical site. The literature is reviewed in detail, and steps to potentially prevent recurrence in this patient population are discussed.

Energy, exergy, exergo-economic, enviro-economic, exergo-environmental, exergo-enviro-economic, sustainability and sensitivity (6E,2S) analysis on single slope solar still-An experimental study.

Tackling water scarcity is a significant challenge due to the rapid increase in the global population, which is raising concern for the supply of fresh water. high demand of fresh water leading to a failure in meeting the demand for fresh water. This study aims to investigate the feasibility of an efficient single-slope solar still with an aluminum-finned plate absorber and internal and external reflectors to address water scarcity. Energy, exergy, economic and environmental analyses (6E) were undertaken to deeply analyze its impact on the environment. The maximum energy and exergy efficiency achieved was 60.19% and 21.57%, respectively, at a 2cm depth. The use of both external and internal reflectors assisted in the highest productivity of 7.02 liters. The cost of 0.033$/liter was obtained for a lifetime of 10 years for the optimal system. The payback time in terms of energy and exergy for the optimal system is 0.88 and 2.23 years, respectively. Furthermore, sustainability and sensitivity (2S) analysis were also performed to assess the system's current and future feasibility. The total price for carbon dioxide mitigation during the solar still lifetime was $346.7, which represents the cost saving achieved with the installation of the optimal system.