Smartphone-Based Rapid Quantitative Detection Platform with Imprinted Polymer for Pb (II) Detection in Real Samples.

This paper reports the successful development and application of an efficient method for quantifying Pb2+ in aqueous samples using a smartphone-based colorimetric device with an imprinted polymer (IIP). The IIP was synthesized by modifying the previous study; using rhodizonate, 2-acrylamido-2-methylpropane sulfonic acid (AMPS), N,N'-methylenebisacrylamide (MBA), and potassium persulfate (KPS). The polymers were then characterized. An absorption study was performed to determine the optimal conditions for the smartphone-based colorimetric device processing. The device consists of a black box (10 × 10 × 10 cm), which was designed to ensure repeatability of the image acquisition. The methodology involved the use of a smartphone camera to capture images of IIP previously exposed at Pb2+ solutions with various concentrations, and color channel values were calculated (RGB, YMK HSVI). PLS multivariate regression was performed, and the optimum working range (0-10 mg L-1) was determined using seven principal components with a detection limit (LOD) of 0.215 mg L-1 and R2 = 0.998. The applicability of a colorimetric sensor in real samples showed a coefficient of variation (% RSD) of less than 9%, and inductively coupled plasma mass spectrometry (ICP-MS) was applied as the reference method. These results confirmed that the quantitation smartphone-based colorimetric sensor is a suitable analytical tool for reliable on-site Pb2+ monitoring.

Distribution of Aspergillus species and risk factors for aspergillosis in mainland China: a systematic review.

Background: Aspergillus, a widespread fungus in the natural environment, poses a significant threat to human health by entering the human body via the airways and causing a disease called aspergillosis. This study comprehensively analyzed data on aspergillosis in published articles from mainland China to investigate the prevalence of Aspergillus, and risk factors, mortality rate, and underlying condition associated with aspergillosis. Methods: Published articles were retrieved from Google Scholar, PubMed, and Science Direct online search engines. In the 101 analyzed studies, 3558 Aspergillus isolates were meticulously collected and classified. GraphPad Prism 8 was used to statistically examine the epidemiology and clinical characteristics of aspergillosis. Results: Aspergillus fumigatus was prominently reported (n = 2679, 75.14%), followed by A. flavus (n = 437, 12.25%), A. niger (n = 219, 6.14%), and A. terreus (n = 119, 3.33%). Of a total of 9810 patients, 7513 probable cases accounted for the highest number, followed by confirmed cases (n = 1956) and possible cases (n = 341). In patients, cough emerged as the most common complaint (n = 1819, 18.54%), followed by asthma (n = 1029, 10.48%) and fever (1024, 10.44%). Of total studies, invasive pulmonary aspergillosis (IPA) was reported in 47 (45.53%) studies, exhibiting an increased prevalence in Beijing (n = 12, 25.53%), Guangdong (n = 7, 14.89%), and Shanghai (n = 6, 12.76%). Chronic pulmonary aspergillosis (CPA) was reported in 14 (13.86%) studies. Among the total of 14 studies, the occurrence of CPA was 5 (35.71%) in Beijing and 3 (21.42%) in Shanghai. Allergic bronchopulmonary aspergillosis (ABPA), was reported at a lower frequency (n = 8, 7.92%), Guangdong recorded a relatively high number (n = 3, 37.5%), followed by Beijing (n = 2, 25.0%), and Shanghai (n = 1, 12.5%). Percentage of death reported: IPA had the highest rate (n = 447, 68.87%), followed by CPA (n = 181, 27.88%) and ABPA (n = 14, 2.15%). Among the aspergillosis patients, 6220 had underlying conditions, including chronic lung disease (n = 3765, 60.53%), previous tuberculosis (n = 416, 6.68%), and organ transplant or organ failure (n = 648, 10.41%). Aspergillosis was also found in patients using corticosteroid therapy (n = 622, 10.0%). Conclusion: This review sheds light on the prevalence patterns of Aspergillus species, risk factors of aspergillosis, and gaps in surveillance that could be helpful for the control and treatment of aspergillosis and guide the researchers in future studies. Registration: This systematic review was prospectively registered on PROSPERO: Registration ID CRD42023476870.

Design and Fabrication of a Biomimetic Smart Material for Electrochemical Detection of Carbendazim Pesticides in Real Samples with Enhanced Selectivity.

Agricultural products are vitally important for sustaining life on earth and their production has notably grown over the years worldwide in general and in Brazil particularly. Elevating agricultural practices consequently leads to a proportionate increase in the usage of pesticides that are crucially important for enhanced crop yield and protection. These compounds have been employed excessively in alarming concentrations, causing the contamination of soil, water, and air. Additionally, they pose serious threats to human health. The current study introduces an innovative tool for producing appropriate materials coupled with an electrochemical sensor designed to measure carbendazim levels. The sensor is developed using a molecularly imprinted polymer (MIP) mounted on a glassy carbon electrode. This electrode is equipped with multi-walled carbon nanotubes (MWCNTs) for improved performance. The combined system demonstrates promising potential for accurately quantifying carbendazim. The morphological characteristics of the synthesized materials were investigated using field emission scanning electron microscopy (FESEM) and the Fourier-transform infrared (FTIR) technique. The analytical curve was drawn using the electrochemical method in the range of 2 to 20 ppm while for HPLC 2-12 ppm; the results are presented as the maximum adsorption capacity of the MIP (82.4%) when compared with NIP (41%) using the HPLC method. The analysis conducted using differential pulse voltammetry (DPV) yielded a limit of detection (LOD) of 1.0 ppm and a repeatability of 5.08% (n = 10). The results obtained from the analysis of selectivity demonstrated that the proposed electrochemical sensor is remarkably efficient for the quantitative assessment of carbendazim, even in the presence of another interferent. The sensor was successfully tested for river water samples for carbendazim detection, and recovery rates ranging from 94 to 101% were obtained for HPLC and 94 to 104% for the electrochemical method. The results obtained show that the proposed electrochemical technique is viable for the application and quantitative determination of carbendazim in any medium.

Preparation of a Molecularly Imprinted Polymer on Polyethylene Terephthalate Platform Using Reversible Addition-Fragmentation Chain Transfer Polymerization for Tartrazine Analysis via Smartphone.

This work describes the preparation of a molecularly imprinted polymer (MIP) platform on polyethylene terephthalate (MIP-PET) via RAFT polymerization for analyzing tartrazine using a smartphone. The MIP-PET platform was characterized using Fourier transform infrared (FTIR) techniques, Raman Spectroscopy, X-ray photoelectron spectroscopy (XPS), and confocal microscopy. The optimal pH and adsorption time conditions were determined. The adsorption capacity of the MIP-PET plates with RAFT treatment (0.057 mg cm-2) was higher than that of the untreated plates (0.028 mg cm-2). The kinetic study revealed a pseudo-first-order model with intraparticle diffusion, while the isotherm study indicated a fit for the Freundlich model. Additionally, the MIP-PET demonstrated durability by maintaining its adsorption capacity over five cycles of reuse without significant loss. To quantify tartrazine, images were captured using a smartphone, and the RGB values were obtained using the ImageJ® free program. A partial least squares regression (PLS) was performed, obtaining a linear range of 0 to 7 mg L-1 of tartrazine. The accuracy of the method was 99.4% (4.97 ± 0.74 mg L-1) for 10 samples of 5 mg L-1. The concentration of tartrazine was determined in two local soft drinks (14.1 mg L-1 and 16.5 mg L-1), with results comparable to the UV-visible spectrophotometric method.

Interleukin inhibitors and the associated risk of candidiasis.

Interleukins (ILs) are vital in regulating the immune system, enabling to combat fungal diseases like candidiasis effectively. Their inhibition may cause enhanced susceptibility to infection. IL inhibitors have been employed to control autoimmune diseases and inhibitors of IL-17 and IL-23, for example, have been associated with an elevated risk of Candida infection. Thus, applying IL inhibitors might impact an individual's susceptibility to Candida infections. Variations in the severity of Candida infections have been observed between individuals with different IL inhibitors, necessitating careful consideration of their specific risk profiles. IL-1 inhibitors (anakinra, canakinumab, and rilonacept), IL-2 inhibitors (daclizumab, and basiliximab), and IL-4 inhibitors (dupilumab) have rarely been associated with Candida infection. In contrast, tocilizumab, an inhibitor of IL-6, has demonstrated an elevated risk in the context of coronavirus disease 2019 (COVID-19) treatment, as evidenced by a 6.9% prevalence of candidemia among patients using the drug. Furthermore, the incidence of Candida infections appeared to be higher in patients exposed to IL-17 inhibitors than in those exposed to IL-23 inhibitors. Therefore, healthcare practitioners must maintain awareness of the risk of candidiasis associated with using of IL inhibitors before prescribing them. Future prospective studies need to exhaustively investigate candidiasis and its associated risk factors in patients receiving IL inhibitors. Implementing enduring surveillance methods is crucial to ensure IL inhibitors safe and efficient utilization of in clinical settings.

Risk of candidiasis associated with interleukin-17 inhibitors: Implications and management.

The application of interleukin-17 (IL-17) inhibitors, including secukinumab, ixekizumab, brodalumab, and bimekizumab, are associated with elevated risk of candidiasis. These medications interfere with the IL-17 pathway, which is essential for maintaining mucosal barriers and coordinating the immune response against Candida species. The observational data and clinical trials demonstrate the increased incidence of candidiasis in individuals treated with IL-17 inhibitors. Brodalumab and bimekizumab pose a greater risk than secukinumab in eliciting candidiasis, whereas the data regarding ixekizumab are equivocal. Higher doses and prolonged treatment duration of IL-17 inhibitors increase the risk of candidiasis by compromising the immune response against Candida species. Prior to prescribing IL-17 inhibitors, healthcare professionals should comprehensively evaluate patients' medical histories and assess their risk factors. Patients should be educated on the signs and symptoms of candidiasis to facilitate early detection and intervention. Future research should focus on identifying the risk factors associated with candidiasis in patients receiving IL-17 inhibitors. Prospective studies and long-term surveillance are required to explore the impact of specific inhibitors on the incidence and severity of candidiasis and to evaluate the effectiveness of combination therapies, such as concurrent use of IL-17 inhibitors and prophylactic antifungal agents.

Adaptation of Family-Based Healthy Weight Program for Children who Survived Leukemia.

Objective: Understand the perspectives of children who survived acute lymphoblastic leukemia (ALL) and their parents to adapt a guideline-based, family-based, intensive health behavior and lifestyle intervention treatment for this population. Methods: Nine children 8-17 years of age [median = 12 years (IQR 10-16), median years off treatment = 5 (2-7)] who survived ALL and eleven parents participated in focus groups to assess perceptions of weight, weight-related behaviors, and perceived barriers to FBT. Responses were analyzed thematically, and resultant adaptations were guided by the Framework for Reporting Adaptations and Modifications-Enhanced (FRAME). Results: Topics and themes identified included mental and physical health concerns (e.g., treatment-related medical complications, body esteem), a perception of excess weight as protective, the continuing influence of eating habits established during cancer treatment (e.g., instrumental feeding practices, snacking), and potential barriers to activity (i.e., physical limitations, lack of sport experience). Resultant adaptations to FBT were contextual (e.g., virtual delivery) and related to the content, including an emphasis on weight management in the context of survivorship; education about late effects, overweight and obesity; increased emphasis on structured eating patterns and instrumental eating; provider recommended physical activity; and tailored emotion-focused and body esteem content. Conclusions: Focus groups for children who survived pediatric ALL provided insights that aided the adaptation of FBT for this population. A pilot trial of FBT for children who survived ALL and their parents is underway to evaluate acceptability, feasibility, and preliminary efficacy. Trial registration: ClinicalTrials.gov identifier: NCT05410574.

Development of an Optical Sensor Using a Molecularly Imprinted Polymer as a Selective Extracting Agent for the Direct Quantification of Tartrazine in Real Water Samples.

This study presents a new optical sensor for tartrazine (TAR) quantification developed using a molecularly imprinted polymer (MIP) as the recognition element, with optical fiber serving as the supporting substrate. The fiber surface was functionalized with 3-(trimethoxysilyl)propyl methacrylate (MPS), and the fiber was coated with MIP using the precipitation polymerization method. The analysis of MIP immobilization on the functionalized optical fiber (FF) was conducted through the use of scanning electron microscopy (SEM) and Fourier transform infrared spectroscopy (FTIR) techniques. Experimental parameters, such as contact time and fiber length, were adjusted in order to obtain the highest sensitive response signal for the functionalized optical fiber (FF-MIP). The fiber sensor, FF-MIP, exhibited a relatively higher response signal for tartrazine compared to other interfering dyes. The rapid and total desorption of the analyte from FF-MIP allowed the immediate reemployment of FF-MIP, which also presented an acceptable repeatability for the reflectance signal. The imprinting factors for the studied dyes were between 0.112 and 0.936 in front of TAR, 1.405, and selectivity factors were between 1.501 and 12.545, confirming the sensor selectivity. The FF-MIP sensor was successfully applied for tartrazine quantification in real water samples, where it yielded satisfactory results comparable to those of the HPLC reference method.

Electrochemical Analysis of Curcumin in Real Samples Using Intelligent Materials.

Curcumin is a compound of great importance in the food industry due to its biological and pharmacological properties, which include being an antioxidant, anti-inflammatory, antibacterial, antiviral, and anticarcinogenic. This paper proposes the synthesis of an electrochemical sensor based on molecularly imprinted polymers (MIPs) and MWCNT by drop casting deposited on a glassy carbon electrode (GCE) for the selective quantification of curcumin in food samples. The synthesized compounds are characterized by Fourier transform infrared (IR), Brunauer-Emmett-Teller (BET), and electrochemical techniques such as cyclic voltammetry (CV) and differential pulse voltammetry (DPV). The optimal conditions for further experiments were determined by selecting these parameters. We examined three food products, commercial capsules, turmeric rhizomes, and commercial turmeric powder, employing both electrochemical and HPLC methods for the analysis. The electrochemical method revealed a limit of detection (LOD) value of 0.1365 µmol L-1, compared with the HPLC analysis, which gave a value of 3.55 µmol L-1. Furthermore, the MIP material demonstrated superior selectivity for the analyte compared to potential interferents. The recovery percentage, determined using the HPLC method, fell within the range of 87.5% to 102.6.

Epidemiology and antifungal susceptibilities of clinically isolated Aspergillus species in South China.

Aspergillosis is a rising concern worldwide; however, its prevalence is not well documented in China. This retrospective study determined Aspergillus's epidemiology and antifungal susceptibilities at Meizhou People's Hospital, South China. From 2017 to 2022, the demographic, clinical, and laboratory data about aspergillosis were collected from the hospital's records and analysed using descriptive statistics, chi-square test, and ANOVA. Of 474 aspergillosis cases, A. fumigatus (75.32%) was the most common, followed by A. niger (9.92%), A. flavus (8.86%), and A. terreus (5.91%). A 5.94-fold increase in aspergillosis occurred during the study duration, with the highest cases reported from the intensive care unit (52.74%) - chronic pulmonary aspergillosis (79.1%) and isolated from sputum (62.93%). Only 38 (8.02%) patients used immunosuppressant drugs, while gastroenteritis (5.7%), haematologic malignancy (4.22%), and cardiovascular disease (4.22%) were the most prevalent underlying illnesses. In A. fumigatus, the wild-type (WT) isolates against amphotericin B (99.1%) were higher than triazoles (97-98%), whereas, in non-fumigatus Aspergillus species, the triazole (95-100%) WT proportion was greater than amphotericin B (91-95%). Additionally, there were significantly fewer WT A. fumigatus isolates for itraconazole and posaconazole in outpatients than inpatients. These findings may aid in better understanding and management of aspergillosis in the region.

Development and Characterization of a Molecularly Imprinted Polymer for the Selective Removal of Brilliant Green Textile Dye from River and Textile Industry Effluents.

In this paper, we present an alternative technique for the removal of Brilliant Green dye (BG) in aqueous solutions based on the application of molecularly imprinted polymer (MIP) as a selective adsorbent for BG. The MIP was prepared by bulk radical polymerization using BG as the template; methacrylic acid (MAA) as the functional monomer, selected via computer simulations; ethylene glycol dimethacrylate (EGDMA) as cross-linker; and 2,2'-azobis(2-methylpropionitrile) (AIBN) as the radical initiator. Scanning electron microscopy (SEM) analyses of the MIP and non-molecularly imprinted polymer (NIP)-used as the control material-showed that the two polymers exhibited similar morphology in terms of shape and size; however, N2 sorption studies showed that the MIP displayed a much higher BET surface (three times bigger) compared to the NIP, which is clearly indicative of the adequate formation of porosity in the former. The data obtained from FTIR analysis indicated the successful formation of imprinted polymer based on the experimental procedure applied. Kinetic adsorption studies revealed that the data fitted quite well with a pseudo-second order kinetic model. The BG adsorption isotherm was effectively described by the Langmuir isotherm model. The proposed MIP exhibited high selectivity toward BG in the presence of other interfering dyes due to the presence of specific recognition sites (IF = 2.53) on its high specific surface area (112 m2/g). The imprinted polymer also displayed a great potential when applied for the selective removal of BG in real river water samples, with recovery ranging from 99 to 101%.

Molecularly Imprinted Polymer-Coated CdTe Quantum Dots for Fluorometric Detection of Sulfonamide Antibiotics in Food Samples.

This work reports the development and application of a highly selective core@shell-based quantum dot-molecularly imprinted polymer (QD@MIP) sensor for the detection of sulfadiazine (SDZ)-an antibiotic which belongs to the sulfonamide family. The synthesis of the smart material or MIP (molecularly imprinted polymer) was carried out by a precipitation method directly on the quantum dot surface, which played the role of a fluorescent probe in the optical sensor. The synthesized polymer was characterized by scanning electron microscopy and Fourier transform infrared spectroscopy. Fluorescence experiments were performed in order to evaluate the effects of pH, interaction time of the QD@MIP with the analyte and SDZ concentration in different matrices. Under optimized conditions, a linear concentration range of 10.0-60.0 ppm and a limit of detection of 3.33 ppm were obtained. The repeatability and reproducibility of the proposed QD@MIP were evaluated in terms of the RSD, where RSD values of less than 5% were obtained in both tests. Selectivity studies were carried out in the presence of four possible interfering substances with quenching properties, and the signals obtained for these interferents confirmed the excellent selectivity of the proposed sensor; the imprinting factor value obtained for SDZ was 1.64. Finally, the proposed sensor was applied in real animal-based food samples using a spiked concentration of SDZ, where the recovery values obtained were above 90% (experiments were performed in triplicate).

Synthesis, Characterization, and Evaluation of a Novel Molecularly Imprinted Polymer (MIP) for Selective Quantification of Curcumin in Real Food Sample by UV-Vis Spectrophotometry.

Curcumin is the main colorant of the curcuma longa plant, a food with many benefits for human health. This work aims to synthesize a novel molecularly imprinted polymer (MIP) for the selective detection of curcumin in real samples obtained from the local market of Peru. MIPs were synthesized via bulk polymerization using curcumin, acrylamide, ethylene glycol dimethacrylate, ABCV, and acetonitrile. FTIR spectra showed equal spectra for MIP and NIP. N2 physisorption analysis presented a higher value BET surface for the MIP (28.5 m2 g-1) compared to the NIP (18.5 m2 g-1). The adsorption capacity of the MIP was evaluated using UV-vis spectrophotometry in the band around 430 nm. The adsorption kinetics found were of pseudo-second-order and a Qe value of 16.2 mg g-1. Furthermore, the adsorption process resembles the Freundlich adsorption model with a heterogeneity factor of less than 1 (0.61) and Kf greater for MIP (1.97). The selectivity test indicated that MIP is more selective for curcumin (Q = 13.20 mg g-1) than against interferents (Q = 2.19 mg g-1). The specific selectivity factor (S) obtained for the interferents was greater than 1 which indicates a good selectivity. Finally, the application of MIP in real samples using UV-vis spectrophotometry yielded a recovery value greater than 70%.

Cryptococcosis in Southern China: Insights from a Six-Year Retrospective Study in Eastern Guangdong.

Objective: Cryptococcosis is a fatal infection that can affect both immunocompetent and immunocompromised patients, and it is little understood in China's various regions. This research aimed to look at the epidemiology, risk factors, and antifungal susceptibility pattern of Cryptococcus neoformans in eastern Guangdong, China. Methods: A six-year (2016-2022) retrospective study was conducted at Meizhou People's Hospital, China. Demographical, clinical, and laboratory data of cryptococcal patients were collected from hospital records and statistically analyzed using the chi-square and ANOVA tests. Results: Overall, 170 cryptococcal infections were recorded, of which meningitis accounted for 78 (45.88%), cryptococcemia for 50 (29.41%), and pneumonia for 42 (24.7%). The number of cases increased 8-fold during the study duration. The median age of patients was 58 years (Inter quartile range: 47-66), and the high proportion of cases was from the male population (n = 121, 71.17%). The underlying diseases were identified only in 60 (35.29%) patients, of which 26 (15.29%) were severely immunocompromised, and 26 (15.29%) others were mildly immunocompromised. A statistically significant difference was reported for chronic renal failure, and anemia (p < 0.05) persisted in cases of three infection types. A high number of non-wild type (NWT) isolates were found against amphotericin B (n=13/145, 8.96%), followed by itraconazole (n=7/136, 5.15%) and voriconazole (n=4/158, 2.53%). Only six isolates (3.79%) were multidrug-resistant, four of which were from cryptococcemia patients. Compared to meningitis and pneumonia, cryptococcemia revealed a higher percentage of NWT isolates (p < 0.05). Conclusion: In high-risk populations, cryptococcal infections require ongoing monitoring and management.

GC-MS Analysis of Persicaria bistorta: Uncovering the Molecular Basis of Its Traditional Medicinal Use.

Persicaria bistorta is a perennial herb used traditionally in treating various ailments, including diarrhea, abdominal pain, and bleeding. In this study, we used gas chromatography-mass spectrometry (GC-MS) analysis to identify the chemical composition of Persicaria bistorta. The GC-MS analysis revealed the presence of several compounds, including flavonoids, tannins, saponins, and alkaloids. Among those, the most important from medicinal points of view are ethyl oleate (3%), cyclotetradecane (4.74%), dodecanoic acid (4.69%), hexadecanoic acid (5.61%), tetradecane (5.25%), cis-13-octadecenoic acid (10.91%), and bis(2-ethylhexyl) phthalate (32%). The GC-MS analysis of ethanolic fraction of Persicaria bistorta involved in antibacterial activity showed about 18 compounds. Among those, the most important from a medicinal and nutritional point of view are bis(2-ethylhexyl) phthalate (42.20%), 6-octadecenoic acid methyl ester, (Z)- (10.37%), ethyl oleate (6.84%), hexadecanoic acid methyl ester (6.67%), and methyl ester and oleic acid (5.27%). Reported biological antibacterial activity has shown that the main compound determined in both extracts was bis(2-ethylhexyl) phthalate, which has higher peak area percentage in ethanolic extract than in ethyl acetate fraction. Some oily compounds important for health because of their cis-conformation were also revealed in the given study like ethyl oleate and oleic acid. Overall, results suggest that Persicaria bistorta may have therapeutic potential and warrant further investigation. Further research is needed to confirm the efficacy and safety of Persicaria bistorta as a natural medicine and determine its active compounds' mechanisms of action.

Six-Year Retrospective Analysis of Epidemiology, Risk Factors, and Antifungal Susceptibilities of Candidiasis from a Tertiary Care Hospital in South China.

Candidiasis is a life-threatening disease that increases mortality in critically ill patients. However, such epidemiological data are still lacking in underdeveloped regions of China. A retrospective analysis (2016 to 2021) was conducted in Meizhou People's Hospital, China to study the burden of candidiasis, particularly candidemia, and antifungal susceptibilities of the species among hospitalized patients. Of the 7,864 candidiasis cases, 461 (5.86%) were candidemia cases. Candida albicans (64.25%) was the most identified species, followed by C. tropicalis (12.61%), C. glabrata (10.79%), and C. parapsilosis (9.79%). In non-C. albicans (NCA) candidemia cases, the number of C. glabrata cases was higher (102/461, 22.37%) than C. tropicalis (64/461, 14.04%). Gastrointestinal pathology, respiratory dysfunctions, septic shock, and malignancies were common underlying comorbidities, respectively. A central venous catheter was an independent risk factor for both C. albicans and NCA candidemia. The mortality rate was not statistically significant for either C. albicans or NCA. Amphotericin B and 5-flucytosine were highly effective (98 to 100%), while azoles were least effective (67.74 to 95.66%). Candidemia cases caused by C. tropicalis and C. glabrata had significantly lower azole susceptibility than non-candidemia-causing isolates. This study provides valuable information for prescribers to choose the right empirical therapy, for researchers to explore different resistance mechanisms, and for health care managers to control candidiasis better. IMPORTANCE This study provides important information on the burden of candidiasis, particularly candidemia, and the antifungal susceptibility of Candida species among hospitalized patients in an underdeveloped region of China. First, the finding that azoles were least effective against Candida species causing candidemia is particularly noteworthy, as it suggests the possibility of resistance to this class of antifungal agents. This information can guide the choice of empirical therapy and help in the selection of appropriate antifungal agents for the treatment of candidemia, thereby reducing the risk of resistance development. Second, the study provides important information for researchers to explore different resistance mechanisms in Candida species. Finally, the study has important implications for health care managers in controlling the spread of candidiasis. The high prevalence of candidemia cases in the study highlights the need for appropriate infection control measures to prevent the spread of the disease.

Using a Smartphone-Based Colorimetric Device with Molecularly Imprinted Polymer for the Quantification of Tartrazine in Soda Drinks.

The present study reports the development and application of a rapid, low-cost in-situ method for the quantification of tartrazine in carbonated beverages using a smartphone-based colorimetric device with molecularly imprinted polymer (MIP). The MIP was synthesized using the free radical precipitation method with acrylamide (AC) as the functional monomer, N,N'-methylenebisacrylamide (NMBA) as the cross linker, and potassium persulfate (KPS) as radical initiator. The smartphone (RadesPhone)-operated rapid analysis device proposed in this study has dimensions of 10 × 10 × 15 cm and is illuminated internally by light emitting diode (LED) lights with intensity of 170 lux. The analytical methodology involved the use of a smartphone camera to capture images of MIP at various tartrazine concentrations, and the subsequent application of the Image-J software to calculate the red, green, blue (RGB) color values and hue, saturation, value (HSV) values from these images. A multivariate calibration analysis of tartrazine in the range of 0 to 30 mg/L was performed, and the optimum working range was determined to be 0 to 20 mg/L using five principal components and a limit of detection (LOD) of 1.2 mg/L was obtained. Repeatability analysis of tartrazine solutions with concentrations of 4, 8, and 15 mg/L (n = 10) showed a coefficient of variation (% RSD) of less than 6%. The proposed technique was applied to the analysis of five Peruvian soda drinks and the results were compared with the UHPLC reference method. The proposed technique showed a relative error between 6% and 16% and % RSD lower than 6.3%. The results of this study demonstrate that the smartphone-based device is a suitable analytical tool that offers an on-site, cost-effective, and rapid alternative for the quantification of tartrazine in soda drinks. This color analysis device can be used in other molecularly imprinted polymer systems and offers a wide range of possibilities for the detection and quantification of compounds in various industrial and environmental matrices that generate a color change in the MIP matrix.

Biomimetic Electrochemical Sensors Based on Core-Shell Imprinted Polymers for Targeted Sunset Yellow Estimation in Environmental Samples.

Magnetic molecularly imprinted polymers (MMIPs) contain the predesigned specialized recognition capability that can be chosen to build credible functional materials, that are easy to handle and have a good degree of specificity. Hence, the given piece of work is intended to design a novel electrochemical sensor incorporating magnetite-based molecularly imprinted polymers. The building materials consisted of a cross-linker (EGDMA), reaction-initiator (AIBN), monomer (methylene succinic acid-MSA), and template molecule (Sunset Yellow-SY dye). MMIPs exhibited a diameter of 57 nm with an irregular shape due to the presence of cavities based on SEM analysis. XRD patterns exhibited crystallinity, as well as amorphous peaks that are attributed to polymeric and non-polymeric frameworks of MMIPs. The crystallite size of the MMIPs from XRD analysis was found to be 16.28 nm based on the Debye-Scherrer's equation. Meanwhile, the FTIR bands showed the synthesis of MMIPs using monomer and methylene succinic acid. The sorption data at the optimized operating conditions (pH 2, sorbent dosage 3 mg, time 18 min) showed the highest sorption capacity of 40 mg/g. The obtained data best fitted to the Langmuir sorption isotherm and followed the pseudo-second-order kinetics. The magneto-sensors were applied for ultrasensitive, rapid, and simple sensing of SY dye. The electrochemical experiments were run at the operating condition range of (scan rate 10-50 mV/s, tads 0-120 s, pH 5-9, potential range 1-1.5 V for CV and 1-1.3 V for SWAdASV). The linear range of detection was set to 1.51 × 10-6 M to 1.51 × 10-6 M posing LOD and LOQ values of 8.6242 × 10-5 M and 0.0002874 M, respectively. The regression analysis value for the calibration was found to be 0.950. Additionally, high adsorption efficiency, selectivity, reusability, and strong structural stability of the magneto-sensors showed potential use for SY detection in real samples. These characteristics make MMIPs a viable electrochemical substrate for the detection of chemical contaminants in the environment and in health-related products.

Extraction-assisted voltammetric determination of homocysteine using magnetic nanoparticles modified with molecularly imprinted polymer.

A magnetic graphite-epoxy composite (m-GEC) electrochemical sensor is presented based on magnetic imprinted polymer (mag-MIP) to determine homocysteine (Hcy). Mag-MIP was synthesized via precipitation polymerization, using functionalized magnetic nanoparticles (Fe3O4) together with the template molecule (Hcy), the functional monomer 2-hydroxyethyl methacrylate (HEMA), and the structural monomer trimethylolpropane trimethacrylate (TRIM). For mag-NIP (magnetic non-imprinted polymer), the procedure was the same in the absence of Hcy. Morphological and structural properties of the resultant mag-MIP and mag-NIP were examined using TEM, FT-IR, and Vibrating Sample Magnetometer. Under optimized conditions, the m-GEC/mag-MIP sensor showed a linear range of 0.1-2 µmol L-1, with a limit of detection (LOD) of 0.030 µmol L-1. In addition, the proposed sensor responded selectively to Hcy compared to several interferents present in biological samples. The recovery values determined by differential pulse voltammetry (DPV) were close to 100% for natural and synthetic samples, indicating good method accuracy. The developed electrochemical sensor proves to be a suitable device for determining Hcy, with advantages related to magnetic separation and electrochemical analysis.

Biomimetic Material for Quantification of Methotrexate Using Sensor Based on Molecularly Imprinted Polypyrrole Film and MWCNT/GCE.

This study investigates biomimetic sensors for the detection of methotrexate contaminants in environmental samples. Sensors inspired by biological systems are the focus of this biomimetic strategy. Methotrexate is an antimetabolite that is widely used for the treatment of cancer and autoimmune diseases. Due to the widespread use of methotrexate and its rampant disposal into the environment, the residues of this drug are regarded as an emerging contaminant of huge concern, considering that exposure to the contaminant has been found to lead to the inhibition of some essential metabolic processes, posing serious risks to humans and other living beings. In this context, this work aims to quantify methotrexate through the application of a highly efficient biomimetic electrochemical sensor constructed using polypyrrole-based molecularly imprinted polymer (MIP) electrodeposited by cyclic voltammetry on a glassy carbon electrode (GCE) modified with multi-walled carbon nanotubes (MWCNT). The electrodeposited polymeric films were characterized by infrared spectrometry (FTIR), scanning electron microscopy (SEM), and cyclic voltammetry (CV). The analyses conducted using differential pulse voltammetry (DPV) yielded a detection limit of 2.7 × 10-9 mol L-1 for methotrexate, a linear range of 0.01-125 µmol L-1, and a sensitivity of 0.152 µA L mol-1. The results obtained from the analysis of the selectivity of the proposed sensor through the incorporation of interferents in the standard solution pointed to an electrochemical signal decay of only 15.4%. The findings of this study show that the proposed sensor is highly promising and suitable for use in the quantification of methotrexate in environmental samples.