Size-controlled synthesis of La and chitosan doped cobalt selenide nanostructures for catalytic and antibacterial activity with molecular docking analysis.

Co-precipitation method was adopted to synthesize ternary heterostructure catalysts La/CS-CoSe NSs (lanthanum/chitosan­cobalt selenide nanostructures) without the use of a surfactant. During synthesis, a fixed amount (3 wt%) of CS was doped with 2 and 4 wt% La to control the growth, recombination rate and stability of CoSe NSs. The doped samples served to enhance the surface area, porosity and active sites for catalytic degradation of rhodamine B dye and antibacterial potential against Staphylococcus aureus (S. aureus). Additionally, the synthesized catalysts were examined for morphological, structural and optical characteristics to assess the influence of dopants to CoSe. XRD spectra verified the hexagonal and cubic structure of CoSe, whereas the porosity of the undoped sample (CoSe) increased from 45 to 60 % upon incorporation of dopants (La and Cs). Among the samples analyzed during this study, 4 % La/CS-CoSe exhibited significant bactericidal behavior as well as the highest catalytic reduction of rhodamine B dye in a neutral environment. Molecular docking analysis was employed to elucidate the underlying mechanism behind the bactericidal activity exhibited by CS-CoSe and La/CS-CoSe NSs against DHFRS. aureus and DNA gyraseS. aureus.

Efficient Dye Degradation and Antimicrobial Behavior with Molecular Docking Performance of Silver and Polyvinylpyrrolidone-Doped Zn-Fe Layered Double Hydroxide.

Zn-Fe layered double hydroxide (LDH) was synthesized through the low-temperature-based coprecipitation method. Various concentrations of Ag (1, 3, and 5 wt %) with a fixed amount (5 wt %) of polyvinylpyrrolidone (PVP) were doped into LDH nanocomposites. This research aims to improve the bactericidal properties and catalytic activities of doping-dependent nanocomposites. Adding Ag and PVP to LDH enhanced oxygen vacancies, which increased the amount of hydroxide adsorption sites and the number of active sites. The doped LDH was employed to degrade rhodamine-B dye in the presence of a reducing agent (NaBH4), and the obtained results showed maximum dye degradation in a basic medium compared to acidic and neutral. The bactericidal efficacy of doped Zn-Fe (5 wt %) showed a considerably greater inhibition zone of 3.65 mm against Gram-negative (G-ve) or Escherichia coli (E. coli). Furthermore, molecular docking was used to decipher the mystery behind the microbicidal action of Ag-doped PVP/Zn-Fe LDH and to propose an inhibition mechanism of ß-ketoacyl-acyl carrier protein synthase IIE. coli (FabH) and deoxyribonucleic acid gyrase E. coli behind in vitro results.

In-vitro synergistic microbicidal and catalytic evaluation of polyvinylpyrrolidone/chitosan doped tungsten trioxide nanoplates with evidential in-silico analysis.

In this research, hydrothermally synthesized tungsten trioxide (WO3) nanocomposites doped polyvinylpyrrolidone (PVP) and chitosan (CS) were studied. Various concentrations (3, 6, and 9 wt%) of PVP were doped into a fixed amount of binary system (CS-WO3) nanocomposites. PVP/CS polymers showed attractive attention because of their different structure, functionality, and architecture control as dopant to WO3. The PVP/CS encapsulates the WO3 (ternary composite), which controls crystallite size (band gap reduction), rapidly overcomes the recombination electron-hole pairs issues, and generates the active sites, resulting in improved catalytic and antimicrobial activity. The synthesized nanocomposites revealed significant catalytic efficiency and methylene blue (MB) dye depletion of 99.9 % in the presence of reducing agent (NaBH4) in neutral and acidic media. Antimicrobial effectiveness of produced nanostructures towards Escherichia coli (E. coli) pathogen at low and high concentrations were investigated by Vernier caliper in mm. Furthermore, to their microbicidal action, docking experiments of CS-doped WO3 and PVP/CS-doped WO3 nanostructures for DHFR and FabI of Escherichia coli suggested blockage of aforesaid enzymes as the plausible pathway.

Reverse Semi-Combustion Driven by Titanium Dioxide-Ionic Liquid Hybrid Photocatalyst.

Unprecedented metal-free photocatalytic CO2 conversion to CO (up to 228±48 µmol g-1 h-1) was displayed by TiO2@IL hybrid photocatalysts prepared by simple impregnation of commercially available P25-titanium dioxide with imidazolium-based ionic liquids (ILs). The high activity of TiO2@IL hybrid photocatalysts was mainly associated to (i) TiO2@IL red shift compared to the pure TiO2 absorption, and thus a modification of the TiO2 surface electronic structure; (ii) TiO2 with IL bearing imidazolate anions lowered the CO2 activation energy barrier. The reaction mechanism was postulated to occur via CO2 photoreduction to formate species by the imidazole/imidazole radical redox pair, yielding CO and water.

Peering into the Formation of Template-Free Hierarchical Flowerlike Nanostructures of SrTiO3.

The development of efficient advanced functional materials is highly dependent on properties such as morphology, crystallinity, and surface functionality. In this work, hierarchical flowerlike nanostructures of SrTiO3 have been synthesized by a simple template-free solvothermal method involving poly(vinylpyrrolidone) (PVP). Molecular dynamics simulations supported by structural characterization have shown that PVP preferentially adsorbs on {110} facets, thereby promoting the {100} facet growth. This interaction results in the formation of hierarchical flowerlike nanostructures with assembled nanosheets. The petal morphology is strongly dependent on the presence of PVP, and the piling up of nanosheets, leading to nanocubes, is observed when PVP is removed at high temperatures. This work contributes to a better understanding of how to control the morphological properties of SrTiO3, which is fundamental to the synthesis of perovskite-type materials with tailored properties.

Pristine Ta3 N5 Nanotubes: Trap-Driven High External Biasing Perspective in Semiconductor/Electrolyte Interfaces.

Ta3 N5 is a promising photoelectrode for solar hydrogen production; however, to date pristine Ta3 N5 electrodes without loading co-catalysts have presented limited photoelectrochemical (PEC) performance. In particular, large external biasing has been required to run water oxidation, the origin of which is investigated herein. Ta3 N5 nanotubes (NTs) prepared by nitridation were characterized by a wide range of techniques. The bandgap was confirmed by a novel PEC technique. Nondestructive synchrotron-excited XPS has shown the presence of reduced Ta species deeper in the Ta3 N5 surface. Lower photocurrent and transient spikes that were intense at lower applied biasing were observed under water oxidation; however, spikes were inhibited in the presence of a sacrificial agent and photocurrent was improved even at low biasing. It was observed for the first time that the lower PEC performance under water oxidation can be attributed to the presence of interband trapping states associated with pristine Ta3 N5 NTs/electrolyte junction. These states correspond to the structural defects in Ta3 N5 , devastate PEC performance, and present the necessity to apply higher biasing. The key to circumvent them is to use a sacrificial agent in the electrolyte or to load a suitable co-catalyst to avoid hole accumulation under water oxidation, thereby improving the phootocurrent. The findings on the interband states could also provide guidance for the investigation of PEC properties of new types of semiconducting devices.

Synergizing nanocomposites of CdSe/TiO2 nanotubes for improved photoelectrochemical activity via thermal treatment.

In this work, we show the effect of the thermal treatment temperature on the photoelectrochemical (PEC) activity of CdSe/TiO2 nanocomposites. TiO2 nanotubes (NTs) were synthesized by anodization and the nanocomposites were obtained by depositing CdSe clusters via magnetron sputtering. A two-step thermal treatment was performed: heating the TiO2 NTs at different temperatures prior to CdSe deposition and further heating the CdSe/TiO2 nanocomposites. The nanocomposites were characterized by Rutherford backscattering spectroscopy (RBS), scanning electron microscopy (SEM), scanning transmission electron microscopy (STEM), high-resolution transmission electron microscopy (HRTEM), energy dispersive X-ray spectroscopy (EDX), X-ray diffraction (XRD), UV-Vis spectrophotometry, and electrochemical impedance spectroscopy (EIS). To compare the PEC performance of the CdSe/TiO2 nanocomposites and pristine TiO2 NTs, linear sweep voltammetry (LSV) curves were obtained under visible light and under 1 sun illumination. It was observed that CdSe incorporation into the TiO2 template enhances the visible light absorbance thereby improving the PEC performance of the nanocomposites. We have found that the optical, structural and PEC properties of the CdSe/TiO2 nanocomposites are dependent on the thermal treatment temperature of the TiO2 nanotubular substrate, prior to CdSe deposition. Moreover, a three-fold improvement in photocurrent was observed upon further thermal treatment of the obtained nanocomposite.

Structural, optical and photoelectrochemical characterizations of monoclinic Ta3N5 thin films.

Monoclinic Ta3N5 thin films were synthesized by thermal nitridation of amorphous Ta2O5 films directly sputtered by radio frequency magnetron sputtering. The samples were studied by high resolution transmission electron microscopy, X-ray photoelectron spectroscopy, UV-Vis-NIR spectrophotometry, rietveld refinements, spectroscopic ellipsometry and electrochemical techniques. The surface composition of Ta3N5 thin film was found to be different than the underlying film, affecting the optical properties of the material. Rietveld refinement has confirmed that the nitridation process results in Schottky and oxygen substitutional defects within the crystalline structure of monoclinic Ta3N5 thin film. The optical constants of the film were obtained by spectroscopic ellipsometry within a spectral range of 4.60-0.54 eV, i.e. 270-2300 nm. The suitable parameterization was found to consist of three Tauc-Lorentz and one Lorentz oscillators. The conduction band, valence band and the flat band positions were determined by photoelectrochemical techniques, presenting a strong dependence on pH of the eletrolyte. Improved photocurrent was obtained in alkaline conditions and attributed to the shorter depletion region width measured by Mott-Schottky and the lower recombination life time measured by open circuit potential decay analyses.

TiO2 nanotubes sensitized with CdSe via RF magnetron sputtering for photoelectrochemical applications under visible light irradiation.

Highly ordered TiO2 NT arrays were easily decorated with CdSe via RF magnetron sputtering. After deposition thermal annealing at different temperatures was performed to obtain an improved TiO2/CdSe interface. The heterostructures were characterized by RBS, SEM, XRD, HRTEM, UV-Vis, EIS, IPCE and current versus voltage curves. The sensitized semiconducting electrodes display an enhanced photocurrent density of ca. 2 mA cm(-2) at 0.6 V (vs. Ag/AgCl) under visible light (λ > 400 nm). The sensitized photoelectrodes displayed 3 and 535-fold enhanced photocurrent when compared to bare TiO2 NTs under 1 sun and under visible light illumination, respectively. IES results confirmed the improved charge transfer across the TiO2/CdSe/electrolyte interface after annealing at 400 °C. Incident photon-to-electron conversion efficiency measurements confirmed the efficient sensitization by allowing photoresponse in the visible range.