CO2 activation by permethylpentalene amido zirconium complexes.

We report the synthesis and characterisation of new permethylpentalene zirconium bis(amido) and permethylpentalene zirconium cyclopentadienyl mono(amido) complexes, and their reactivity with carbon dioxide.

Transformation of Formazanate at Nickel(II) Centers to Give a Singly Reduced Nickel Complex with Azoiminate Radical Ligands and Its Reactivity toward Dioxygen.

The heteroleptic (formazanato)nickel bromide complex LNi(µ-Br)2NiL [LH = Mes-NH-N═C(p-tol)-N═N-Mes] has been prepared by deprotonation of LH with NaH followed by reaction with NiBr2(dme). Treatment of this complex with KC8 led to transformation of the formazanate into azoiminate ligands via N-N bond cleavage and the simultaneous release of aniline. At the same time, the potentially resulting intermediate complex L'2Ni [L' = HN═C(p-tol)-N═N-Mes] was reduced by one additional electron, which is delocalized across the π system and the metal center. The resulting reduced complex [L'2Ni]K(18-c-6) has a S = 1/2 ground state and a square-planar structure. It reacts with dioxygen via one-electron oxidation to give the complex L'2Ni, and the formation of superoxide was detected spectroscopically. If oxidizable substrates are present during this process, these are oxygenated/oxidized. Triphenylphosphine is converted to phosphine oxide, and hydrogen atoms are abstracted from TEMPO-H and phenols. In the case of cyclohexene, autoxidations are triggered, leading to the typical radical-chain-derived products of cyclohexene.

Electron transfer within ß-diketiminato nickel bromide and cobaltocene redox couples activating CO2.

Reduction of ß-diketiminato nickel(ii) complexes (LtBuNiII) to the corresponding nickel(i) compounds does not require alkali metal compounds but can also be performed with the milder cobaltocenes. LtBuNiBr and Cp2Co have rather similar redox potentials, so that the equilibrium with the corresponding electron transfer compound [LtBuNiIBr][Cp2CoIII] (ETC) clearly lies on the side of the starting materials. Still, the ETC portion can be used to activate CO2 yielding a mononuclear nickel(ii) carbonate complex and ETC can be isolated almost quantitatively from the solutions through crystallisation. The more negative reduction potential of Cp*2Co shifts the equilibrium formed with LtBuNiBr strongly towards the ETC and accordingly the reaction of such solutions with CO2 is much faster.

Realising the electrochemical stability of graphene: scalable synthesis of an ultra-durable platinum catalyst for the oxygen reduction reaction.

Creating effective and stable catalyst nanoparticle-coated electrodes that can withstand extensive cycling is a current roadblock in realising the potential of polymer electrolyte membrane fuel cells. Graphene has been proposed as an ideal electrode support material due to its corrosion resistance, high surface area and high conductivity. However, to date, graphene-based electrodes suffer from high defect concentrations and non-uniform nanoparticle coverage that negatively affects performance; moreover, production methods are difficult to scale. Herein we describe a scalable synthesis for Pt nanoparticle-coated graphene whereby PtCl2 is reduced directly by negatively charged single layer graphene sheets in solution. The resultant nanoparticles are of optimal dimensions and can be uniformly dispersed, yielding high catalytic activity, remarkable stability, and showing a much smaller decrease in electrochemical surface area compared with an optimised commercial catalyst over 30 000 cycles. The stability is rationalised by identical location TEM which shows minimal nanoparticle agglomeration and no nanoparticle detachment.

Understanding metal synergy in heterodinuclear catalysts for the copolymerization of CO2 and epoxides.

Carbon dioxide and epoxide copolymerization is an industrially relevant means to valorize waste and improve sustainability in polymer manufacturing. Given the value of the polymer products-polycarbonates or polyether carbonates-it could provide an economic stimulus to capture and storage technologies. The process efficiency depends upon the catalyst, and previously Zn(II)Mg(II) heterodinuclear catalysts showed good performances at low carbon dioxide pressures, attributed to synergic interactions between the metals. Now, a Mg(II)Co(II) catalyst is reported that exhibits significantly better activity (turnover frequency > 12,000 h-1) and high selectivity (>99% CO2 utilization and polycarbonate selectivity) for carbon dioxide and cyclohexene oxide copolymerization. Detailed kinetic investigations show a second-order rate law, independent of CO2 pressure from 1-40 bar, to produce polyols. Kinetic data also reveal that synergy arises from differentiated roles for the metals in the mechanism: epoxide coordination occurs at Mg(II), with reduced transition state entropy, while the Co(II) centre accelerates carbonate attack by lowering the transition state enthalpy. This rare insight into intermetallic synergy rationalizes the outstanding catalytic performance and provides a new feature to exploit in other homogeneous catalyses.

Ethene Activation and Catalytic Hydrogenation by a Low-Valent Uranium Pentalene Complex.

The reaction of the uranium(III) complex [U(η8-Pn††)(η5-Cp*)] (1) (Pn†† = C8H4(1,4-SiiPr3)2, Cp* = C5Me5) with ethene at atmospheric pressure produces the ethene-bridged diuranium complex [{(η8-Pn††)(η5-Cp*)U}2(µ-η2:η2-C2H4)] (2). A computational analysis of 2 revealed that coordination of ethene to uranium reduces the carbon-carbon bond order from 2 to a value consistent with a single bond, with a concomitant change in the formal uranium oxidation state from +3 in 1 to +4 in 2. Furthermore, the uranium-ethene bonding in 2 is of the δ type, with the dominant uranium contribution being from f-d hybrid orbitals. Complex 2 reacts with hydrogen to produce ethane and reform 1, leading to the discovery that complex 1 also catalyzes the hydrogenation of ethene under ambient conditions.

Ring-Opening Polymerisation of Low-Strain Nickelocenophanes: Synthesis and Magnetic Properties of Polynickelocenes with Carbon and Silicon Main Chain Spacers.

Polymetallocenes based on ferrocene, and to a lesser extent cobaltocene, have been well-studied, whereas analogous systems based on nickelocene are virtually unexplored. It has been previously shown that poly(nickelocenylpropylene) [Ni(η5 -C5 H4 )2 (CH2 )3 ]n is formed as a mixture of cyclic (6x ) and linear (7) components by the reversible ring-opening polymerisation (ROP) of tricarba[3]nickelocenophane [Ni(η5 -C5 H4 )2 (CH2 )3 ] (5). Herein the generality of this approach to main-chain polynickelocenes is demonstrated and the ROP of tetracarba[4]nickelocenophane [Ni(η5 -C5 H4 )2 (CH2 )4 ] (8), and disila[2]nickelocenophane [Ni(η5 -C5 H4 )2 (SiMe2 )2 ] (12) is described, to yield predominantly insoluble homopolymers poly(nickelocenylbutylene) [Ni(η5 -C5 H4 )2 (CH2 )4 ]n (13) and poly(tetramethyldisilylnickelocene) [Ni(η5 -C5 H4 )2 (SiMe2 )2 ]n (14), respectively. The ROP of 8 and 12 was also found to be reversible at elevated temperature. To access soluble high molar mass materials, copolymerisations of 5, 8, and 12 were performed. Superconducting quantum interference device (SQUID) magnetometry measurements of 13 and 14 indicated that these homopolymers behave as simple paramagnets at temperatures greater than 50 K, with significant antiferromagnetic coupling that is notably larger in carbon-bridged 6x /7 and 13 compared to the disilyl-bridged 14. However, the behaviour of these polynickelocenes deviates substantially from the Curie-Weiss law at low temperatures due to considerable zero-field splitting.

Geoff Cloke at 65: a pioneer in organometallic chemistry.

Professor Geoff Cloke FRS celebrates his 65th birthday in 2018. In a career spanning four decades, his research endeavours have accounted for some of the most innovative synthetic chemistry of the modern era, with his many publications describing truly exceptional compounds and experimental methods that portray a unique chemical imagination. In addition to his scientific accomplishments, Cloke can be particularly proud of his successful mentoring, a level of dedication that propelled many students and post-docs on to become research leaders in their own right. In compiling this collection of some of his research articles, a small cross-section of his friends, colleagues and collaborators, wish to pay tribute to his modesty, compassion and generous personality.

Single-molecule magnet properties of a monometallic dysprosium pentalene complex.

The pentalene-ligated dysprosium complex [(η8-Pn†)Dy(Cp*)] (1Dy) (Pn† = [1,4-(iPr3Si)2C8H4]2-) and its magnetically dilute analogue are single-molecule magnets, with energy barriers of 245 cm-1. Whilst the [Cp*]- ligand in 1Dy provides a strong axial crystal field, the overall axiality of this system is attenuated by the unusual folded structure of the [Pn†]2- ligand.

Hydrodeoxygenation of water-insoluble bio-oil to alkanes using a highly dispersed Pd-Mo catalyst.

Bio-oil, produced by the destructive distillation of cheap and renewable lignocellulosic biomass, contains high energy density oligomers in the water-insoluble fraction that can be utilized for diesel and valuable fine chemicals productions. Here, we show an efficient hydrodeoxygenation catalyst that combines highly dispersed palladium and ultrafine molybdenum phosphate nanoparticles on silica. Using phenol as a model substrate this catalyst is 100% effective and 97.5% selective for hydrodeoxygenation to cyclohexane under mild conditions in a batch reaction; this catalyst also demonstrates regeneration ability in long-term continuous flow tests. Detailed investigations into the nature of the catalyst show that it combines hydrogenation activity of Pd and high density of both Brønsted and Lewis acid sites; we believe these are key features for efficient catalytic hydrodeoxygenation behavior. Using a wood and bark-derived feedstock, this catalyst performs hydrodeoxygenation of lignin, cellulose, and hemicellulose-derived oligomers into liquid alkanes with high efficiency and yield.Bio-oil is a potential major source of renewable fuels and chemicals. Here, the authors report a palladium-molybdenum mixed catalyst for the selective hydrodeoxygenation of water-insoluble bio-oil to mixtures of alkanes with high carbon yield.