Textile-Based Adsorption Sensor via Mixed Solvent Dyeing with Aggregation-Induced Emission Dyes.

This study demonstrates a novel methodology for developing a textile-based adsorption sensor via mixed solvent dyeing with aggregation-induced emission (AIE) dyes on recycled fabrics. AIE dyes were incorporated into the fabrics using a mixed solvent dyeing method with a co-solvent mixture of H2O and organic solvents. This method imparted unique fluorescence properties to fabrics, altering fluorescence intensity or wavelength based on whether the AIE dye molecules were in an isolated or aggregated state on the fabrics. The precise control of the H2O fraction to organic solvent during dyeing was crucial for influencing fluorescence intensity and sensing characteristics. These dyed fabrics exhibited reactive thermochromic and vaporchromic properties, with changes in fluorescence intensity corresponding to variations in temperature and exposure to volatile organic solvents (VOCs). Their superior characteristics, including a repetitive fluorescence switching property and resistance to photo-bleaching, enhance their practicality across various applications. Consequently, the smart fabrics dyed with AIE dye not only find applications in clothing and fashion design but demonstrate versatility in various fields, extending to sensing temperature, humidity, and hazardous chemicals.

Antimicrobial, Preservative, and Hazard Assessments from Eight Chemical Classes.

Preservatives, such as isothiazolinones and formaldehyde-releasing compounds, provide safety and stability in consumer products by preventing microbial contamination. Yet these ingredients present human and environmental hazards, including allergic contact dermatitis and aquatic toxicity. The development of safer alternatives has been stymied by trade-offs between safety and efficacy. To enable the identification of safer preservatives, substances from eight functional classes were assessed for antimicrobial efficacy and human and environmental hazards. First, 130 substances were evaluated for microbial inhibitory activity against two relevant model microorganisms, Aspergillus brasiliensis (filamentous fungi) and Pseudomonas aeruginosa (Gram-negative bacteria). High-performing compounds within each class were assessed for hazards across a broad suite of human and environmental health end points. Four promising compounds were selected for further testing based on microbial inhibition, hazard profiles, and commercial availability. These ingredients were tested for biocidal activity in model home care formulations using methods adapted from industrial preservative challenge guidelines (USP-51). Two substances were identified, caprylhydroxamic acid and caprylyl glycol, that provided adequate preservation and improved toxicity profiles compared to isothiazolinone and formaldehyde-releasing preservatives. This study highlights trade-offs between antimicrobial activity and hazards across a broad spectrum of chemical classes relevant to safer preservative development.

Auranofin-Loaded Chitosan Nanoparticles Demonstrate Potency against Triple-Negative Breast Cancer.

Triple-negative breast cancer (TNBC) remains a clinical challenge due to molecular, metabolic, and genetic heterogeneity as well as the lack of validated drug targets. Thus, therapies or delivery paradigms are needed. Gold-derived compounds including the FDA-approved drug, auranofin have shown promise as effective anticancer agents against several tumors. To improve the solubility and bioavailability of auranofin, we hypothesized that the nanodelivery of auranofin using biodegradable chitosan modified polyethylene glycol (PEG) nanoparticles (NPs) will enhance anticancer activity against TNBC by comparing the best nanoformulation with the free drug. The selection of the nanoformulation was based on synthesis of various chitosan PEG copolymers via formaldehyde-mediated engraftment of PEG onto chitosan to form [chitosan-g-PEG] copolymer. Furthermore, altered physiochemical properties of the copolymer was based on the formaldehyde ratio towards nanoparticles (CP 1-4 NPs). Following the recruitment of PEG onto the chitosan polymer surface, we explored how this process influenced the stiffness of the nanoparticle using atomic force microscopy (AFM), a factor crucial for in vitro and in vivo studies. Our objective was to ensure the full functionality and inherent properties of chitosan as the parent polymer was maintained without allowing PEG to overshadow chitosan's unique cationic properties while improving solubility in neutral pH. Hence, CP 2 NP was chosen. To demonstrate the efficacy of CP 2 NP as a good delivery carrier for auranofin, we administered a dose of 3 mg/kg of auranofin, in contrast to free auranofin, which was given at 5 mg/kg. In vivo studies revealed the potency of encapsulated auranofin against TNBC cells with a severe necrotic effect following treatment superior to that of free auranofin. In conclusion, chitosan-g-PEG nanoparticles have the potential to be an excellent delivery system for auranofin, increasing its effectiveness and potentially reducing its clinical limitations.

Colloidal InSb Quantum Dots for 1500 nm SWIR Photodetector with Antioxidation of Surface.

III-V quantum dots (QDs) have emerged as significant alternatives to Cd- and Pb-based QDs, garnering notable attention over the past two decades. However, the understanding of III-V QDs, particularly in the short wave-infrared (SWIR) region, remains limited. InAs QDs are widely recognized as the most prominent SWIR QDs, but their absorption beyond 1400 nm presents various challenges. Consequently, InSb QDs with relatively narrower bandgaps have been investigated; however, research on their device applications is lacking. In this study, InSb QDs are synthesized with absorption ranging from 1000 to 1700 nm by introducing Cl- ions to enhance QD surface stability during synthesis. Additionally, it coated InAs and ZnSe shells onto the InSb QDs to validate photoluminescence in the SWIR region and improve photostability. Subsequently, these QDs are employed in the fabrication of photodetector devices, resulting in photodetection above 1500 nm using Pb-free QDs. The photodetection device exhibited an external quantum efficiency (EQE) of 11.4% at 1370 nm and 6.3% at 1520 nm for InSb core QDs, and 4.6% at 1520 nm for InSb/InAs core/shell QDs, marking the successful implementation of such a device. In detail, the 1520 nm for InSb core device showed a dark current density(JD ) value of: 1.46 × 10-9 A/cm2 , responsivity(R): 0.078 A/W, and specific detectivity based on the shot noise(Dsh *): 3.6 × 1012 Jones at 0 V.

Colorimetric and fluorometric bimodal amine chemosensor based on deprotonation-induced intramolecular charge transfer: Application to food spoilage detection.

Amine derivatives are signature organic compounds generated from rotten protein food. Thus, sensitive detection of the presence of amines in protein foods can be a critical technique for monitoring their quality. In this study, we develop an organic chemosensor probe, 4-(2-(3-(dicyanomethylene)- 5,5-dimethylcyclohex-1-en-1-yl)vinyl)-N,N-diethylbenzenaminium chloride (DEAH), to effectively detect amines through discernible bimodal (colorimetric and fluorometric) changes. By exploiting the amine-triggered intramolecular charge transfer behavior, DEAH exhibits rapid color changes (<1 s) with an excellent detection limit (36.9 nM) and also fluorescence turn-on in response to amine gas. Moreover, it possesses detection capabilities in versatile conditions, including solutions, solids, and coated films, suggesting its practical applicability. In particular, DEAH shows dramatic color change from yellow to violet with exceptional color difference (△Eab) over 98, repeatable usability, and excellent selectivity to amines. Based on these compelling advantages, we successfully demonstrate real-time monitoring of amine gas generated from spoiled protein foods using DEAH-coated films.

Simultaneous detection of mycotoxigenic Aspergillus species of sections Circumdati and Flavi using multiplex digital PCR.

Populations of ochratoxin-producing Aspergillus section Circumdati species and aflatoxin-producing Aspergillus section Flavi species frequently coexist in soil and are the main sources of mycotoxin contamination of tree nuts. Identification of mycotoxigenic Aspergillus species in these sections is difficult using traditional isolation and culture methods. We developed a multiplex digital PCR (dPCR) assay to detect and quantify Aspergillus ochraceus, Aspergillus westerdijkiae, and Aspergillus steynii (section Circumdati), as well as Aspergillus flavus and Aspergillus parasiticus (section Flavi), in environmental samples based on species-specific calmodulin gene sequences. Relative quantification of each species by dPCR of mixed-species templates correlated with corresponding DNA input ratios. Target species could be detected in soil inoculated with conidia from each species. Non-target species of sections Circumdati, Flavi, and Nigri were generally not detectable using this dPCR method. Detected non-target species (Aspergillus fresenii, Aspergillus melleus, Aspergillus sclerotiorum, and Aspergillus subramanianii) were discernible from A. ochraceus in dual-template dPCR reactions based on differential fluorescence intensity.

High Detectivity Near Infrared Organic Photodetectors Using an Asymmetric Non-Fullerene Acceptor for Optimal Nanomorphology and Suppressed Dark Current.

Recently, the development of non-fullerene acceptors (NFAs) for near-infrared (NIR) organic photodetectors (OPDs) has attracted great interest due to their excellent NIR light absorption properties. Herein, we developed NFAs by substituting an electron-donating moiety (branched alkoxy thiophene (BAT)) asymmetrically (YOR1) and symmetrically (YOR2) for the Y6 framework. YOR1 exhibited nanoscale phase separation in a film blended with PTB7-Th. Moreover, substituting the BAT unit effectively extended the absorption wavelengths of YOR1 over 1000 nm by efficient intramolecular charge transfer and extension of the conjugation length. Consequently, YOR1-OPD exhibited significantly reduced dark current and improved responsivity by simultaneously satisfying optimal nanomorphology and significant suppression of charge recombination, resulting in 1.98 × 1013 and 3.38 × 1012 Jones specific detectivity at 950 and 1000 nm, respectively. Moreover, we successfully demonstrated the application of YOR1-OPD in highly sensitive photoplethysmography sensors using NIR light. This study suggests a strategic approach for boosting the overall performance of NIR OPDs targeting a 1000 nm light signal using an all-in-one (optimal morphology, suppressed dark current, and extended NIR absorption wavelength) NFA.

High-efficiency fungal pathogen intervention for seed protection: new utility of long-chain alkyl gallates as heat-sensitizing agents.

Control of food-contaminating fungi, especially pathogens that produce mycotoxins, is problematic since effective method for intervening fungal infection on food crops is often limited. Generally Regarded As Safe (GRAS) chemicals, such as natural compounds or their structural derivatives, can be developed as antimicrobial agents for sustainable food/crop production. This study identified that long-chain alkyl gallates, i.e., octyl-, nonyl-, and decyl gallates (OG (octyl 3,4,5-trihydroxybenzoic acid), NG, DG), can function as heat-sensitizing agents that effectively prevent fungal contamination. Out of twenty-eight candidate compounds and six conventional antifungal agents examined, the heat-sensitizing capacity was unique to the long-chain alkyl gallates, where OG exhibited the highest activity, followed by DG and NG. Since OG is a GRAS compound classified by the United States Food and Drug Administration (FDA), further in vitro antifungal studies were performed using OG. When OG and mild heat (57.5°C) were co-administered for 90 seconds, the treatment achieved > 99.999% fungal death (> 5 log reduction). Application of either treatment alone was significantly less effective at reducing fungal survival. Of note, co-application of OG (3 mM) and mild heat (50°C) for 20 minutes completely prevented the survival of aflatoxigenic Aspergillus flavus contaminating crop seeds (Brassica rapa Pekinensis), while seed germination rate was unaffected. Heat-sensitization was also determined in selected bacterial strains (Escherichia coli, Agrobacterium tumefaciens). Altogether, OG is an effective heat-sensitizing agent for control of microbial pathogens. OG-mediated heat sensitization will improve the efficacy of antimicrobial practices, achieving safe, rapid, and cost-effective pathogen control in agriculture/food industry settings.

Natural Products as Drug Candidates for Redox-Related Human Disease.

This Special Issue presented recent progress on natural products that serve as drug candidates for redox-related human diseases [...].

Enhancing Circularly Polarized Phosphorescence via Integrated Top-Down and Bottom-Up Approach.

In the dynamic domain of chiroptical technologies, it is imperative to engineer emitters endowed with circularly polarized luminescence (CPL) properties. This research demonstrates an advancement by employing a combined top-down and bottom-up strategy for the simultaneous amplification of photoluminescence quantum yield (Φ) and the luminescence dissymmetry factor (glum ). Square-planar Pt(II) complexes form helical assemblies, driven by torsional strain induced by bis(nonyl) chains. Integration of chiral anions leads these assemblies to prefer distinct helical sense. This arrangement activates the metal-metal-to-ligand charge transfer (MMLCT) transition that is CPL-active, with Φ and |glum | observing an upswing contingent on the charge number and aryl substituents in chiral anions. Utilizing the soft-lithographic micromolding in capillaries technique, we could fabricate exquisitely-ordered, one-dimensional co-assemblies to achieve the metrics to Φ of 0.32 and |glum | of 0.13. Finally, our spectroscopic research elucidates the underlying mechanism for the dual amplification, making a significant stride in the advancement of CPL-active emitters.

Soft Tissue Mass Extramedullary Plasmacytoma Following Radiation Therapy for Solitary Bone Plasmacytoma.

Soft tissue involvement in extramedullary plasmacytoma (EMP) is an exceptionally rare occurrence within the spectrum of plasma cell neoplasms. This case report presents the unique scenario of a patient who developed a soft tissue mass EMP subsequent to receiving radiation therapy for a solitary bone plasmacytoma at a distinct anatomical site. The primary objective of this report is to elucidate the clinical characteristics, diagnostic complexities, and management considerations associated with this uncommon presentation. Through a comprehensive review of existing literature, we aim to provide valuable insights and expertise to healthcare providers involved in the assessment and treatment of similar cases.

Exceedingly Rare Bilateral Synchronous Germ Cell Testicular Tumors With Different Histopathological Features.

Bilateral synchronous testicular tumors are a relatively uncommon occurrence, especially when they involve germ cell tumors of different histology. In this context, we present a compelling case report of a male patient who was diagnosed with bilateral synchronous germ cell testicular tumors, with one being a seminoma and the other a non-seminomatous germ cell tumor (NSGCT). The coexistence of two distinct histological types, seminoma and NSGCT, necessitates a comprehensive diagnostic approach to accurately identify and characterize each tumor. This underscores the importance of clinical history, physical examination, imaging techniques, and histopathological analysis to establish an appropriate diagnosis. Careful consideration must be given to factors such as tumor stage, histological subtype, and individual patient characteristics to determine the most suitable treatment strategy. Treatment options may encompass a combination of surgery, chemotherapy, and radiation therapy, tailored to each tumor's specific characteristics and the patient's overall health. By highlighting this unique case, we aim to underscore the significance of meticulous evaluation and accurate diagnosis when confronted with bilateral synchronous testicular tumors of different histology.

Serum-Stable Gold(III) Bisphosphine Complex Induces Mild Mitochondrial Uncoupling and In Vivo Antitumor Potency in Triple Negative Breast Cancer.

The preparation of cyclometalated complexes offers a path to stable materials, catalysts, and therapeutic agents. Here, we explore the anticancer potential of novel biphenyl organogold(III) cationic complexes supported by diverse bisphosphine ligands, Au-1-Au-5, toward aggressive glioblastoma and triple negative breast cancer cells (TNBCs). The [C^C] gold(III) complex, Au-3, exhibits significant tumor growth inhibition in a metastatic TNBC mouse model. Remarkably, Au-3 displays promising blood serum stability over a relevant therapeutic window of 24 h and alteration in the presence of excess L-GSH. The mechanism-of-action studies show that Au-3 induces mitochondrial uncoupling, membrane depolarization, and G1 cell cycle arrest and prompts apoptosis. To the best of our knowledge, Au-3 is the first biphenyl gold-phosphine complex to uncouple mitochondria and inhibit TNBC growth in vivo.

Dithieno[3,2-f:2',3'-h]quinoxaline-Based Photovoltaic-Thermoelectric Dual-Functional Energy-Harvesting Wide-Bandgap Polymer and its Backbone Isomer.

Both organic solar cells (OSCs) and organic thermoelectrics (OTEs) are promising energy-harvesting technologies for future renewable and sustainable energy sources. Among various material systems, organic conjugated polymers are an emerging material class for the active layers of both OSCs and OTEs. However, organic conjugated polymers showing both OSC and OTE properties are rarely reported because of the different requirements toward the OSCs and OTEs. In this study, the first simultaneous investigation of the OSC and OTE properties of a wide-bandgap polymer PBQx-TF and its backbone isomer iso-PBQx-TF are reported. All wide-bandgap polymers form face-on orientations in a thin-film state, but PBQx-TF has more of a crystalline character than iso-PBQx-TF, originating from the backbone isomeric structures of α,α '/ß,ß '-connection between two thiophene rings. Additionally, iso-PBQx-TF shows inactive OSC and poor OTE properties, probably because of the absorption mismatch and unfavorable molecular orientations. At the same time, PBQx-TF exhibits both decent OSC and OTE performances, indicating that it satisfies the requirements for both OSCs and OTEs. This study presents the OSC and OTE dual-functional energy-harvesting wide-bandgap polymer and the future research directions for hybrid energy-harvesting materials.

Remarkable Electrical Conductivity Increase and Pure Metallic Properties from Semiconducting Colloidal Nanocrystals by Cation Exchange for Solution-Processable Optoelectronic Applications.

The authors report a strategic approach to achieve metallic properties from semiconducting CuFeS colloidal nanocrystal (NC) solids through cation exchange method. An unprecedentedly high electrical conductivity is realized by the efficient generation of charge carriers onto a semiconducting CuS NC template via minimal Fe exchange. An electrical conductivity exceeding 10 500 S cm-1 (13 400 S cm-1 at 2 K) and a sheet resistance of 17 Ω/sq at room temperature, which are among the highest values for solution-processable semiconducting NCs, are achieved successfully from bornite-phase CuFeS NC films possessing 10% Fe atom. The temperature dependence of the corresponding films exhibits pure metallic characteristics. Highly conducting NCs are demonstrated for a thermoelectric layer exhibiting a high power factor over 1.2 mW m-1 K-2 at room temperature, electrical wires for switching on light emitting diods (LEDs), and source-drain electrodes for p- and n-type organic field-effect transistors. Ambient stability, eco-friendly composition, and solution-processability further validate their sustainable and practical applicability. The present study provides a simple but very effective method for significantly increasing charge carrier concentrations in semiconducting colloidal NCs to achieve metallic properties, which is applicable to various optoelectronic devices.

Synthesis and in vitro antiprotozoal evaluation of novel metronidazole-Schiff base hybrids.

Herein we report the synthesis of 21 novel small molecules inspired by metronidazole and Schiff base compounds. The compounds were evaluated against Trichomonas vaginalis and cross-screened against other pathogenic protozoans of clinical relevance. Most of these compounds were potent against T. vaginalis, exhibiting IC50 values < 5 µM. Compound 20, the most active compound against T. vaginalis, exhibited an IC50 value of 3.4 µM. A few compounds also exhibited activity against Plasmodium falciparum and Trypanosomal brucei brucei, with compound 6 exhibiting an IC50 value of 0.7 µM against P. falciparum and compound 22 exhibiting an IC50 value of 1.4 µM against T.b. brucei. Compound 22 is a broad-spectrum antiprotozoal agent, showing activities against all three pathogenic protozoans under investigation.

Valorizing Tree-Nutshell Particles as Delivery Vehicles for a Natural Herbicide.

The United States is a principal producer of tree nuts (almonds, pistachios, and walnuts), resulting in the generation of excess of tree-nutshell by-products each year, with few market outlets. A nutshell is an essential, lignocellulosic layer that protects a kernel (seed) from the environment during cultivation. The objective of this study was to develop nutshell by-products as herbicide delivery systems, which would not only enable sustainable weed control in fields but also increases nutshell value and reduce the cost of waste disposal. We recently identified a natural salicylaldehyde (SA) that emits volatiles with both herbicidal and antifungal properties. In this study, walnut shell particles saturated with 0.8 to 1.6 M SA were developed as delivery vehicles for SA to soil, which allowed for the controlled release of an SA fumigant for weed control. The pre- and post-emergent herbicidal efficacy of SA was investigated using model monocot (Lolium arundinaceum (Schreb.) Darbysh; turfgrass) and dicot (Brassica rapa var. pekinensis; Chinese cabbage) plants. We compared (1) the effects of different types of solvents for dissolving SA (dimethyl sulfoxide (DMSO) and ethanol (60%, v/v)), and (2) the effect of covering soil with plastic layers (i.e., soil pasteurization) or not covering soil during SA fumigation using nutshells. Results: In the pre-emergent herbicidal testing with the soil covered, the dicot plants exhibited levels of higher susceptibility to SA in DMSO emitted from nutshells when compared to the monocot plants. The seed germination frequencies in the dicots were 15% and 1% with 0.8 and 1.6 M SA, respectively, while those in the monocots were 32% and 18%, respectively, under the same test conditions. In the post-emergent herbicidal testing with the soil covered, the growth of both the monocot and dicot plants was completely prevented after 5 to 7 days of SA fumigation, resulting in the deaths of entire plants. It was noteworthy that in the post-emergent herbicidal testing, SA dissolved in ethanol (60%, v/v) completely disrupted the growth of the monocot and dicot plants as early as 3 days after SA emission from the nutshells, even without the soil being covered. Tree-nutshell particles could serve as effective SA delivery vehicles with controlled release capabilities for SA. The SA exhibited pre- and post-emergent herbicidal activities against the monocot and dicot plants at most growth stages. SA (0.8 and 1.6 M) dissolved in ethanol (60%, v/v) might exert a synergism for higher herbicidal activity after emission from nutshells. Since tree nuts capture/store a substantial amount of carbon over their life-cycles, the new and sustainable utility of using nutshells not only reduces carbon emissions but also valorizes tree-nut by-products, thus benefitting the tree-nut industry.

Food Toxicology and Food Safety: Report of the 3rd International Electronic Conference on Foods: Food, Microbiome, and Health-A Celebration of the 10th Anniversary of Foods' Impact on Our Wellbeing.

The purpose of the conference session summarized in this article was to bring together international experts on food toxicology and food safety and share the current scientific knowledge on these topics. The presentations covered a wide range of interdisciplinary issues, including (i) the impact of diet on body weight and health outcomes including results from animal models of carcinogenesis, (ii) methods for microbial oil extraction, (iii) food processing and its impact on food safety and health, (iv) novel compounds to avoid mycotoxin contamination of agricultural products, and (v) the safety of cannabidiol in food supplements based on Cannabis sativa extracts. Some of the conclusions of the presentations included that correct food choices may impact on the risk of non-communicable diseases such as cancer, that food processing may have an influence on health, by either reducing or increasing risks, and that research regarding novel compounds is important, which may have preventive but also detrimental effects on health.

Chiral gold(III) complexes: speciation, in vitro, and in vivo anticancer profile.

Emerging synthetic development of chiral gold(III) complexes has prompted new opportunities in catalysis and material science with limited utility in biomedicine. Here, we demonstrate potential chemotherapeutic capability of [C^N]Au(III)Cl(R-DuPhos) (1-7) complexes, containing 1,2-bis[(2R,5R)-2,5-dialkylphospholano]benzene, which shows good stabilty, potent anticancer activity, and tolerability in mice.