Tailoring Lithium Horizontal Deposition for Long-Lasting High-Loading NCA (≥5 mA h cm-2)||Lithium-Metal Full Cells in Carbonate Electrolytes.

We report a design for a synergistic lithium (Li) metal hosting layer for high-loading Li(Ni,Co,Al)O2 (NCA) (≥5 mA h cm-2)||Li-metal full cells in carbonate electrolytes. Based on density functional theory calculations, the hosting layer was designed as a three-dimensional silver/carbon composite nanofiber (Ag/CNF) network with high Li affinity and a platinum (Pt)-coated polypropylene separator with low Li affinity. This design enabled the tailoring of horizontal Li deposition on the Ag/CNF hosting layer. The Li deposition behavior modulated by the hosting layer was thoroughly examined based on the initial Li deposition and cycling behaviors of the Li||Li symmetric cell configuration. Cryogenic focused-ion beam cross-sectional images of the cycled Li anodes clearly demonstrated that dense lithium deposition was enabled by the synergistic hosting layer high-loading NCA (≥5 mA h cm-2)||Li-metal full cells. When the hosting layer was used, the average cycling performance improved by 78.27% under various cycling conditions. Our work demonstrates that the synergistic hosting layer design is a fruitful pathway to accelerate the commercialization of high-energy-density Li-metal batteries in carbonate electrolytes.

Wafer-Scale Freestanding Monocrystalline Chalcogenide Membranes by Strain-Assisted Epitaxy and Spalling.

Monocrystalline chalcogenide thin films in freestanding forms are very much needed in advanced electronics such as flexible phase change memories (PCMs). However, they are difficult to manufacture in a scalable manner due to their growth and delamination challenges. Herein, we report a viable strategy for a wafer-scale epitaxial growth of monocrystalline germanium telluride (GeTe) membranes and their deterministic integrations onto flexible substrates. GeTe films are epitaxially grown on Ge wafers via a tellurization reaction accompanying a formation of confined dislocations along GeTe/Ge interfaces. The as-grown films are subsequently delaminated off the wafers, preserving their wafer-scale structural integrity, enabled by a strain-engineered spalling method that leverages the stress-concentrated dislocations. The versatility of this wafer epitaxy and delamination approach is further expanded to manufacture other chalcogenide membranes, such as germanium selenide (GeSe). These materials exhibit phase change-driven electrical switching characteristics even in freestanding forms, opening up unprecedented opportunities for flexible PCM technologies.

Synergistic augmentation and fundamental mechanistic exploration of ß-Ga2O3-rGO photocatalyst for efficient CO2 reduction.

We explore the novel photodecomposition capabilities of ß-Ga2O3 when augmented with reduced graphene oxide (rGO). Employing real-time spectroscopy, this study unveils the sophisticated mechanisms of photodecomposition, identifying an optimal 1 wt% ß-Ga2O3-rGO ratio that substantially elevates the degradation efficiency of Methylene Blue (MB). Our findings illuminate a direct relationship between the photocatalyst's composition and its performance, with the quantity of rGO synthesis notably influencing the catalyst's morphology and consequently, its photodegradation potency. The 1 wt% ß-Ga2O3-rGO composition stands out in its class, showing a notable 4.7-fold increase in CO production over pristine ß-Ga2O3 and achieving CO selectivity above 98%. This remarkable performance is a testament to the significant improvements rendered by our novel rGO integration technique. Such promising results highlight the potential of our custom-designed ß-Ga2O3-rGO photocatalyst for critical environmental applications, representing a substantial leap forward in photocatalytic technology.

Changes in mandibular width and frontal-lower facial profile after orthognathic surgery using sagittal split ramus osteotomy with removal of internal bone interference in patients with class III skeletal malocclusion.

BACKGROUND: The purpose of this study is to analyze changes in mandibular width and frontal view ramus inclination using cone beam CT in patients with skeletal class III malocclusion who underwent BSSRO, with the removal of bone interference between segments. METHODS: For all 20 subjects, cone-beam CT imaging was performed prior to surgery (T1), immediately post-surgery (T2), and 6 months after surgery (T3). Reorientation was performed using R2GATE software (MegaGen, Seoul, Korea). The gonion and antegonial notch were used as reference points in the sagittal view, and the most lateral point of the condyle head was used as the reference point in the frontal view. All measurements were recorded in the frontal view. RESULTS: Inter-gonial width decreased by 2.64 mm at T3-T2 (P < .001) and by 2.58 mm at T3-T1 (P < .05). Inter-antegonial width decreased by 1.75 mm at T3-T2 (P < .05) and by 3.5 mm at T3-T1 (P < .001). In the frontal view, the right ramus inclination based on the gonion increased by 2.07° at T3-T1 (P < .05). The left ramus inclination based on gonion increased by 2.45° at T2-T1 (P < .05) and by 3.94° at T3-T1 (P < .001). The right ramus inclination based on antegonial notch increased by 2.35° at T2-T1 (P < .05) and by 3.04° at T3-T1 (P < .01). The left ramus inclination based on antegonial notch increased by 2.73° at T2-T1 (P < .001) and by 3.18° at T3-T1 (P < .001). CONCLUSIONS: During bilateral sagittal split osteotomy, removing bone interference between the proximal and distal segments results in a reduction of postoperative mandibular width and an increase in frontal view ramus inclination.

Comparison of actual prognosis between unilateral and bilateral central neck dissection in modified radical neck dissection patients with no clinical central lymph node metastasis: a retrospective cohort study.

Purpose: This study aimed to evaluate the long-term prognosis of contralateral central neck dissection (CND) in papillary thyroid cancer (PTC) patients with ipsilateral lateral neck metastasis. We compared the actual recurrence rate according to the extent of CND-ipsilateral and contralateral sides. Methods: A total of 708 PTC patients who underwent total thyroidectomy and concomitant ipsilateral or bilateral CND with ipsilateral lateral neck dissection between January 1997 and December 2022 at Samsung Medical Center were retrospectively analyzed. Results: The median follow-up time was 118 months. Locoregional recurrence was observed in 26 patients (7.9%) and 30 patients (7.9%) in the ipsilateral and bilateral CND groups, respectively. There were 6 contralateral recurrence cases (1.8%) in the ipsilateral CND group and 6 cases (1.6%) in the bilateral CND group. There was only 1 contralateral central neck recurrence in the ipsilateral CND group. The incidence of hypocalcemia (P = 0.007) was higher in the bilateral CND group compared to the ipsilateral CND group. Conclusion: Surgeons may consider performing only unilateral CND-the side where tumor is for therapeutic purposes to reduce surgical complications.

Factors associated with patient satisfaction after arthroscopic rotator cuff repair: do they differ by age?

BACKGROUND: Several studies have investigated factors affecting patient satisfaction after arthroscopic rotator cuff repair (ARCR); however, it is unknown if these factors vary according to age. Therefore, this study aimed to evaluate the factors associated with satisfaction of ARCR in individuals 70 years and older versus younger patients. METHODS: Among 319 consecutive patients who underwent ARCR, 173 were included. Patients were divided into an old age group (≥70 years) and a young age group (<70 years), and the two age groups were further divided into satisfied and unsatisfied subgroups. Patient satisfaction was evaluated at the final follow-up visit using a binary question (yes or no). Clinical outcomes were assessed preoperatively and at the final follow-up. RESULTS: Satisfaction rates in the older and younger age groups were 75.41% and 79.47%, respectively. Mean changes in Constant and American Shoulder and Elbow Surgeons scores were significantly different between the satisfied and unsatisfied subgroups (P=0.031 and P=0.012, respectively) in the young patients. In the old patients, there was a significant difference in the mean change in depression subscale of the Hospital Anxiety and Depression Scale (P=0.031) and anxiety subscale of the Hospital Anxiety and Depression Scale (P=0.044) scores between the satisfied and unsatisfied subgroups. CONCLUSIONS: Factors affecting patient satisfaction after ARCR differed according to age. Psychological improvement was more important to elderly patients, whereas restoration of function was more important to younger patients. Pain relief was important for both age groups. Level of evidence: III.

Orthognathic surgery with removal of lipoma in the asymmetric mandibular prognathism of a patient with a mandibular bone defect due to intramuscular lipoma on the medial aspect of the ramus: a case report.

Lipomas, the most common soft-tissue mesenchymal neoplasms in adults, are characterized by the proliferation of mature white adipocytes without cytologic atypia. Lipomas are rarely observed in the head and neck region. We present a case of resection and orthognathic surgical removal of an intramuscular lipoma of the mandible with involvement of the mandibular ramus and condylar head and neck. An 18-year-old female patient was referred to our hospital for orthognathic surgery for the management of facial asymmetry and mandibular prognathism. The patient did not present with facial swelling, pain, or temporomandibular dysfunction; however, on radiographic examination, including cone-beam computed tomography and magnetic resonance imaging, an infiltrative fatty lesion was observed in the masticator space inside the right mandible, and the adjacent mandible exhibited bone thinning and deformity. Resection of the lipoma was performed along with orthognathic surgery, including a Le Fort I osteotomy for the maxilla and bilateral sagittal split ramus osteotomy (BSSRO). In this case, because the ramus was split using BSSRO, accessing the lipoma intraorally was easy. Consequently, aesthetic scarring was avoided, and no complications, such as unfavorable splitting or pathologic fracture, occurred. Although recurrence has not been observed about 1 year, long-term follow-up should be performed.

High Mobility Transistors and Flexible Optical Synapses Enabled by Wafer-Scale Chemical Transformation of Pt-Based 2D Layers.

Electronic devices employing two-dimensional (2D) van der Waals (vdW) transition-metal dichalcogenide (TMD) layers as semiconducting channels often exhibit limited performance (e.g., low carrier mobility), in part, due to their high contact resistances caused by interfacing non-vdW three-dimensional (3D) metal electrodes. Herein, we report that this intrinsic contact issue can be efficiently mitigated by forming the 2D/2D in-plane junctions of 2D semiconductor channels seamlessly interfaced with 2D metal electrodes. For this, we demonstrated the selectively patterned conversion of semiconducting 2D PtSe2 (channels) to metallic 2D PtTe2 (electrodes) layers by employing a wafer-scale low-temperature chemical vapor deposition (CVD) process. We investigated a variety of field-effect transistors (FETs) employing wafer-scale CVD-2D PtSe2/2D PtTe2 heterolayers and identified that silicon dioxide (SiO2) top-gated FETs exhibited an extremely high hole mobility of ∼120 cm2 V-1 s-1 at room temperature, significantly surpassing performances with previous wafer-scale 2D PtSe2-based FETs. The low-temperature nature of the CVD method further allowed for the direct fabrication of wafer-scale arrays of 2D PtSe2/2D PtTe2 heterolayers on polyamide (PI) substrates, which intrinsically displayed optical pulse-induced artificial synaptic behaviors. This study is believed to vastly broaden the applicability of 2D TMD layers for next-generation, high-performance electronic devices with unconventional functionalities.

Centimeter-Scale Tellurium Oxide Films for Artificial Optoelectronic Synapses with Broadband Responsiveness and Mechanical Flexibility.

Prevailing over the bottleneck of von Neumann computing has been significant attention due to the inevitableness of proceeding through enormous data volumes in current digital technologies. Inspired by the human brain's operational principle, the artificial synapse of neuromorphic computing has been explored as an emerging solution. Especially, the optoelectronic synapse is of growing interest as vision is an essential source of information in which dealing with optical stimuli is vital. Herein, flexible optoelectronic synaptic devices composed of centimeter-scale tellurium dioxide (TeO2) films detecting and exhibiting synaptic characteristics to broadband wavelengths are presented. The TeO2-based flexible devices demonstrate a comprehensive set of emulating basic optoelectronic synaptic characteristics; i.e., excitatory postsynaptic current (EPSC), paired-pulse facilitation (PPF), conversion of short-term to long-term memory, and learning/forgetting. Furthermore, they feature linear and symmetric conductance synaptic weight updates at various wavelengths, which are applicable to broadband neuromorphic computations. Based on this large set of synaptic attributes, a variety of applications such as logistic functions or deep learning and image recognition as well as learning simulations are demonstrated. This work proposes a significant milestone of wafer-scale metal oxide semiconductor-based artificial synapses solely utilizing their optoelectronic features and mechanical flexibility, which is attractive toward scaled-up neuromorphic architectures.

Pure varus posteromedial rotatory instability of the elbow: Radiographic findings, treatment, and outcomes.

INTRODUCTION: Although varus posteromedial rotatory instability (VPMRI) is a subtle elbow injury that involves anteromedial coronoid facet (AMCF) fracture and ligamentous injuries, treatment options and outcomes of VPMRI remains controversial. The aim of this study was to investigate radiographic findings, treatments, and outcomes of a large series of VPMRI. METHODS: We retrospectively reviewed 91 pure VPMRI cases with AMCF fracture (O'Driscoll classification anteromedial type) which were treated at 6 hospitals. Clinical and radiographic outcomes were investigated with a mean follow-up period of 46.8 months using the Mayo elbow performance score (MEPS), and the Quick Disabilities of the Arm, Shoulder and Hand (Quick-DASH) score, and serial plain radiographs. RESULTS: In AMCF fracture, there were 4 cases of subtype 1, 67 cases of subtype 2, and 20 cases of subtype 3. On MRI, complete tears of lateral collateral ligament and medial collateral ligament were observed in 83.1 % (59/71 cases) and 33.8 % (24/71 cases). Operative treatment was performed in 68 cases (74.7 %) including both side fixation in 40 cases (58.8 %), medial side fixation only in 17 cases (25.0 %), and lateral side fixation only in 11 cases (16.2 %). Nonoperative treatment was performed in 23 cases (25.3 %). The mean final MEPS and Quick-DASH scores were 93.7 and 7.9. The overall complication and reoperation rates were 22.0 % and 15.4 %. No significant differences regarding final clinical scores and range of motions were observed between the operative group and the nonoperative group, but significant differences were observed regarding number (p = 0.019) and displacement (p = 0.002) of coronoid fragment, and complication rate (p < 0.001) between the two groups. CONCLUSION: Depending on the pattern of coronoid fragment and the degree of ligamentous injuries, operative treatment of unstable VPMRI using various fixation techniques including coronoid fixation and ligament repair yielded satisfactory final clinical outcomes. However, surgeons should be aware of the high complication and reoperation rates after operative treatment. Stable VPMRI with AMCF fracture involving minimal displacement or small number of fragments can be treated nonoperatively.

Tachol1 QTL on mouse chromosome 1 is responsible for hypercholesterolemia and diet-induced obesity.

Hypercholesterolemia raises the risk for cardiovascular complications and overall health. Hypercholesterolemia is common, affecting 10% of the general population of the US, and heritable. Most individuals with hypercholesterolemia have a polygenic predisposition to the condition. Previously we identified a quantitative trait locus, Tachol1, linked to hypercholesterolemia on mouse chromosome 1 (Chr1) in a cross between C57BL/6J (B6) and TALLYHO/JngJ (TH) mice, a polygenic model for human obesity, type 2 diabetes and hyperlipidemia. Subsequently, using congenic mice that carry a TH-derived genomic segment of Chr1 on a B6 background, we demonstrated that the distal segment of Chr1, where Tachol1 maps, is necessary to cause hypercholesterolemia, as well as diet-induced obesity. In this study, we generated overlapping subcongenic lines to the distal segment of congenic region and characterized subcongenic mice carrying the smallest TH region of Tachol1, ~ 16.2 Mb in size (B6.TH-Chr1-16.2 Mb). Both male and female B6.TH-Chr1-16.2 Mb mice showed a significantly increased plasma total cholesterol levels compared to B6 on both chow and high fat (HF) diet. B6.TH-Chr1-16.2 Mb mice also had greater fat mass than B6 on HF diet, without increasing food intake. The gene and protein expression levels of absent in melanoma 2 (Aim2) gene were significantly upregulated in B6.TH-Chr1-16.2 Mb mice compared to B6. In summary, we confirmed the effect of Tachol1 on hypercholesterolemia and diet-induced obesity using subcongenic analysis.

Efficacy and Safety of Metformin and Atorvastatin Combination Therapy vs. Monotherapy with Either Drug in Type 2 Diabetes Mellitus and Dyslipidemia Patients (ATOMIC): Double-Blinded Randomized Controlled Trial.

BACKGRUOUND: It is well known that a large number of patients with diabetes also have dyslipidemia, which significantly increases the risk of cardiovascular disease (CVD). This study aimed to evaluate the efficacy and safety of combination drugs consisting of metformin and atorvastatin, widely used as therapeutic agents for diabetes and dyslipidemia. METHODS: This randomized, double-blind, placebo-controlled, parallel-group and phase III multicenter study included adults with glycosylated hemoglobin (HbA1c) levels >7.0% and <10.0%, low-density lipoprotein cholesterol (LDL-C) >100 and <250 mg/dL. One hundred eighty-five eligible subjects were randomized to the combination group (metformin+atorvastatin), metformin group (metformin+atorvastatin placebo), and atorvastatin group (atorvastatin+metformin placebo). The primary efficacy endpoints were the percent changes in HbA1c and LDL-C levels from baseline at the end of the treatment. RESULTS: After 16 weeks of treatment compared to baseline, HbA1c showed a significant difference of 0.94% compared to the atorvastatin group in the combination group (0.35% vs. -0.58%, respectively; P<0.0001), whereas the proportion of patients with increased HbA1c was also 62% and 15%, respectively, showing a significant difference (P<0.001). The combination group also showed a significant decrease in LDL-C levels compared to the metformin group (-55.20% vs. -7.69%, P<0.001) without previously unknown adverse drug events. CONCLUSION: The addition of atorvastatin to metformin improved HbA1c and LDL-C levels to a significant extent compared to metformin or atorvastatin alone in diabetes and dyslipidemia patients. This study also suggested metformin's preventive effect on the glucose-elevating potential of atorvastatin in patients with type 2 diabetes mellitus and dyslipidemia, insufficiently controlled with exercise and diet. Metformin and atorvastatin combination might be an effective treatment in reducing the CVD risk in patients with both diabetes and dyslipidemia because of its lowering effect on LDL-C and glucose.

A highly conductive, robust, self-healable, and thermally responsive liquid metal-based hydrogel for reversible electrical switches.

This study introduces a thermally responsive smart hydrogel with enhanced electrical properties achieved through volume switching. This advancement was realized by incorporating multiscale liquid metal particles (LMPs) into the PNIPAM hydrogel during polymerization, using their inherent elasticity and conductivity when deswelled. Unlike traditional conductive additives, LMPs endow the PNIPAM hydrogel with a remarkably consistent volume switching ratio, significantly enhancing electrical switching. This is attributed to the minimal nucleation effect of LMPs during polymerization and their liquid-like behavior, like vacancies in the polymeric hydrogel under compression. The PNIPAM/LMP hydrogel exhibits the highest electrical switching, with an unprecedented switch of 6.1 orders of magnitude. Even after repeated swelling/deswelling cycles that merge some LMPs and increase the conductivity when swelled, the hydrogel consistently maintains an electrical switch exceeding 4.5 orders of magnitude, which is still the highest record to date. Comprehensive measurements reveal that the hydrogel possesses robust mechanical properties, a tissue-like compression modulus, biocompatibility, and self-healing capabilities. These features make the PNIPAM/LMP hydrogel an ideal candidate for long-term implantable bioelectronics, offering a solution to the mechanical mismatch with dynamic human tissues.

Longer peripheral-track lesions are associated with instability after arthroscopic Bankart repair.

BACKGROUND: The glenoid track concept has enabled the categorization of Hill-Sachs lesions (HSLs) into on-track lesions and off-track lesions. Furthermore, among the on-track lesions, further categorization has been established based on the distance from the medial edge of the Hill-Sachs lesion to the medial edge of the glenoid track, into peripheral-track lesions and central-track lesions. Recent studies on peripheral-track lesions and central-track lesions within the glenoid track have shown inconsistencies in failure rates, which deserves further investigation. METHODS: A retrospective cohort comparison of patients who underwent arthroscopic Bankart repair between 2015 and 2020 was performed. 102 patients with peripheral-track HSLs were included. The patients were divided into 2 groups based on the results of the postoperative apprehension test: the apprehension positive group (n = 30), and the apprehension negative group (n = 72). Using preoperative computed tomography (CT) and an image reconstruction program, 3-dimensional (3D) images were segmented to calculate the length, width, depth, and distance of the HSLs. A multivariate logistic regression was used to determine the risk factors of recurrence, for which odds ratio (OR) and 95% confidence interval (CI) were provided. RESULTS: A multivariate logistic regression analysis revealed that the length of the peripheral-track HSLs was a significant independent predictor of failure in this study. (OR 1.380; 95% CI 1.170-1.627; P < .001). The receiver operating characteristics curve (ROC) demonstrated a predictive power (area under the curve = 0.841) and a threshold value of 14.2 mm. CONCLUSION: Length was the only risk factor for the recurrent instability of peripheral-track HSLs after ABR. In the context of surgical decision-making, utilizing the glenoid track concept, medical practitioners may need to evaluate instability by considering the length as a continuous factor, while differentiating between peripheral-track and central-track classifications.

Serial Changes of Fatty Degeneration and Clinical Outcomes after Repair of Medium-Sized Rotator Cuff Tears.

Background: This study was designed to longitudinally analyze quantitative intramuscular and perimuscular fat and evaluate clinical outcomes according to healing degree after rotator cuff repair. Methods: From June 2013 through October 2018, patients who had undergone repair due to medium-sized rotator cuff tears and serial chest computed tomography (CT) preoperatively and at early (6-12 months) and late (at least 3 years) postoperative follow-ups were included. Supraspinatus (SST) intramuscular fat fraction ratio (IFFR) and perimuscular fat fraction ratio (PFFR) were calculated using chest CT. The rotator cuff integrity was categorized as healed, smaller retear (SRT), and larger retear (LRT) by comparing the preoperative tear size and retear size in shoulder CT arthrography at postoperative follow-ups. Clinical outcomes were evaluated using the American Shoulder and Elbow Surgeons (ASES) score, the University of California at Los Angeles (UCLA) shoulder rating scale, and the Constant score preoperatively and at early and late postoperative follow-ups. Results: In the LRT group, compared with the preoperative values, there were increases in the SST IFFR and PFFR at the early (p = 0.002 and p = 0.006, respectively) and late (p < 0.001 and p < 0.001, respectively) postoperative time points. Late postoperative clinical scores (UCLA and Constant scores) were not improved compared to preoperative scores (p = 0.156 and p = 0.094, respectively). In the SRT group, there was no difference in the mean SST IFFR and PFFR between preoperative and early postoperative time points (p = 0.766 and p = 0.180, respectively), but the late postoperative values were higher than preoperative values (p = 0.009 and p = 0.049, respectively). Late postoperative clinical scores (ASES, UCLA, and Constant scores) in the SRT group improved compared to preoperative time (p < 0.001, p < 0.001, and p = 0.016, respectively). In the healed group, compared with the preoperative values, there was no difference in the mean SST IFFR and PFFR at postoperative time points; however, the late postoperative clinical scores (ASES, UCLA, and Constant scores) were improved (all p < 0.001). Conclusions: In the SRT group, IFFR and PFFR progressed in the late postoperative period and clinical scores improved over time. However, in the LRT group, IFFR and PFFR progressed in the early and late postoperative periods and clinical scores did not improve at the late postoperative follow-up.

Patterns of Anterior Inferior Tibiofibular Ligament Avulsion Fracture Accompanied by Ankle Fracture.

The anterior inferior tibiofibular ligament (AITFL) avulsion fracture accompanying an ankle fracture can compromise ankle stability, necessitating accurate evaluation and a clear understanding of its pathophysiology.. The aim of this study was to investigate the association between AITFL avulsion fracture and Lauge-Hansen, Wagstaffe classification. A retro-prospective study was conducted at a university-affiliated tertiary care medical center. We selected 128 patients who underwent surgery at our institution between January 2013 and July 2017 and analyzed the association between AITFL avulsion fracture and the foot position. According to the modified Wagstaffe classification system, there were 39 cases of type II, followed by 9 cases of type III and 8 cases of type IV. Of the7 pronation-abduction fractures, 3 were AITFL avulsion fracture (43%), while of the 21 pronation-external rotation fractures, 9 were AITFL avulsion fracture (43%). Of the 95 supination-external rotation fractures, there were 56 cases (59%) of AITFL avulsion fractures. Of the pronation fractures, 0% were fibular avulsion fractures and 43% were tibial avulsion fractures. Of the supination fractures, 44% were fibular avulsion fractures and 16% were tibial avulsion fracture. The difference in the ratio of fibular to tibial avulsion fractures between pronation and supination fractures was significant (p < .001). These results suggest that tibial avulsion fractures of type IV in the modified Wagstaffe classification and pronation fractures occur due to collision with the anterolateral corners of the distal bone when the talus externally rotates. Moreover, in cases of pronation fractures, a new type of AITFL avulsion fracture has been observed.

Reversible Transition of Semiconducting PtSe2 and Metallic PtTe2 for Scalable All-2D Edge-Contacted FETs.

Two-dimensional (2D) transition metal dichalcogenide (TMD) layers are highly promising as field-effect transistor (FET) channels in the atomic-scale limit. However, accomplishing this superiority in scaled-up FETs remains challenging due to their van der Waals (vdW) bonding nature with respect to conventional metal electrodes. Herein, we report a scalable approach to fabricate centimeter-scale all-2D FET arrays of platinum diselenide (PtSe2) with in-plane platinum ditelluride (PtTe2) edge contacts, mitigating the aforementioned challenges. We realized a reversible transition between semiconducting PtSe2 and metallic PtTe2 via a low-temperature anion exchange reaction compatible with the back-end-of-line (BEOL) processes. All-2D PtSe2 FETs seamlessly edge-contacted with transited metallic PtTe2 exhibited significant performance improvements compared to those with surface-contacted gold electrodes, e.g., an increase of carrier mobility and on/off ratio by over an order of magnitude, achieving a maximum hole mobility of ∼50.30 cm2 V-1 s-1 at room temperature. This study opens up new opportunities toward atomically thin 2D-TMD-based circuitries with extraordinary functionalities.

2023 Korean Endocrine Society Consensus Guidelines for the Diagnosis and Management of Primary Aldosteronism.

Primary aldosteronism (PA) is a common, yet underdiagnosed cause of secondary hypertension. It is characterized by an overproduction of aldosterone, leading to hypertension and/or hypokalemia. Despite affecting between 5.9% and 34% of patients with hypertension, PA is frequently missed due to a lack of clinical awareness and systematic screening, which can result in significant cardiovascular complications. To address this, medical societies have developed clinical practice guidelines to improve the management of hypertension and PA. The Korean Endocrine Society, drawing on a wealth of research, has formulated new guidelines for PA. A task force has been established to prepare PA guidelines, which encompass epidemiology, pathophysiology, clinical presentation, diagnosis, treatment, and follow-up care. The Korean clinical guidelines for PA aim to deliver an evidence-based protocol for PA diagnosis, treatment, and patient monitoring. These guidelines are anticipated to ease the burden of this potentially curable condition.

Low-Temperature Centimeter-Scale Growth of Layered 2D SnS for Piezoelectric Kirigami Devices.

Tin monosulfide (SnS) is a promising piezoelectric material with an intrinsically layered structure, making it attractive for self-powered wearable and stretchable devices. However, for practical application purposes, it is essential to improve the output and manufacturing compatibility of SnS-based piezoelectric devices by exploring their large-area synthesis principle. In this study, we report the chemical vapor deposition (CVD) growth of centimeter-scale two-dimensional (2D) SnS layers at temperatures as low as 200 °C, allowing compatibility with processing a range of polymeric substrates. The intrinsic piezoelectricity of 2D SnS layers directly grown on polyamides (PIs) was confirmed by piezoelectric force microscopy (PFM) phase maps and force-current corroborative measurements. Furthermore, the structural robustness of the centimeter-scale 2D SnS layers/PIs allowed for engraving complicated kirigami patterns on them. The kirigami-patterned 2D SnS layer devices exhibited intriguing strain-tolerant piezoelectricity, which was employed in detecting human body motions and generating photocurrents irrespective of strain rate variations. These results establish the great promise of 2D SnS layers for practically relevant large-scale device technologies with coupled electrical and mechanical properties.