A familial missense variant in the Alzheimer's disease gene SORL1 impairs its maturation and endosomal sorting.

The SORL1 gene has recently emerged as a strong Alzheimer's Disease (AD) risk gene. Over 500 different variants have been identified in the gene and the contribution of individual variants to AD development and progression is still largely unknown. Here, we describe a family consisting of 2 parents and 5 offspring. Both parents were affected with dementia and one had confirmed AD pathology with an age of onset > 75 years. All offspring were affected with AD with ages at onset ranging from 53 years to 74 years. DNA was available from the parent with confirmed AD and 5 offspring. We identified a coding variant, p.(Arg953Cys), in SORL1 in 5 of 6 individuals affected by AD. Notably, variant carriers had severe AD pathology, and the SORL1 variant segregated with TDP-43 pathology (LATE-NC). We further characterized this variant and show that this Arginine substitution occurs at a critical position in the YWTD-domain of the SORL1 translation product, SORL1. Functional studies further show that the p.R953C variant leads to retention of the SORL1 protein in the endoplasmic reticulum which leads to decreased maturation and shedding of the receptor and prevents its normal endosomal trafficking. Together, our analysis suggests that p.R953C is a pathogenic variant of SORL1 and sheds light on mechanisms of how missense SORL1 variants may lead to AD.

A familial missense variant in the Alzheimer's Disease gene SORL1 impairs its maturation and endosomal sorting.

The SORL1 gene has recently emerged as a strong Alzheimer's Disease (AD) risk gene. Over 500 different variants have been identified in the gene and the contribution of individual variants to AD development and progression is still largely unknown. Here, we describe a family consisting of 2 parents and 5 offspring. Both parents were affected with dementia and one had confirmed AD pathology with an age of onset >75 years. All offspring were affected with AD with ages at onset ranging from 53yrs-74yrs. DNA was available from the parent with confirmed AD and 5 offspring. We identified a coding variant, p.(Arg953Cys), in SORL1 in 5 of 6 individuals affected by AD. Notably, variant carriers had severe AD pathology, and the SORL1 variant segregated with TDP-43 pathology (LATE-NC). We further characterized this variant and show that this Arginine substitution occurs at a critical position in the YWTD-domain of the SORL1 translation product, SORL1. Functional studies further show that the p.R953C variant leads to retention of the SORL1 protein in the endoplasmic reticulum which leads to decreased maturation and shedding of the receptor and prevents its normal endosomal trafficking. Together, our analysis suggests that p.R953C is a pathogenic variant of SORL1 and sheds light on mechanisms of how missense SORL1 variants may lead to AD.

Dimerization of the Alzheimer's disease pathogenic receptor SORLA regulates its association with retromer.

SORL1, the gene encoding the large multidomain SORLA protein, has emerged as only the fourth gene that when mutated can by itself cause Alzheimer's disease (AD), and as a gene reliably linked to both the early- and late-onset forms of the disease. SORLA is known to interact with the endosomal trafficking regulatory complex called retromer in regulating the recycling of endosomal cargo, including the amyloid precursor protein (APP) and the glutamate receptor GluA1. Nevertheless, SORLA's precise structural-functional relationship in endosomal recycling tubules remains unknown. Here, we address these outstanding questions by relying on crystallographic and artificial-intelligence evidence to generate a structural model for how SORLA folds and fits into retromer-positive endosomal tubules, where it is found to dimerize via both SORLA's fibronectin-type-III (3Fn)- and VPS10p-domains. Moreover, we identify a SORLA fragment comprising the 3Fn-, transmembrane, and cytoplasmic domains that has the capacity to form a dimer, and to enhance retromer-dependent recycling of APP by decreasing its amyloidogenic processing. Collectively, these observations generate a model for how SORLA dimer (and possibly polymer) formation can function in stabilizing and enhancing retromer function at endosome tubules. These findings can inform investigation of the many AD-associated SORL1 variants for evidence of pathogenicity and can guide discovery of novel drugs for the disease.

Structure and mechanism of cancer-associated N-acetylglucosaminyltransferase-V.

N-acetylglucosaminyltransferase-V (GnT-V) alters the structure of specific N-glycans by modifying α1-6-linked mannose with a ß1-6-linked N-acetylglucosamine branch. ß1-6 branch formation on cell surface receptors accelerates cancer metastasis, making GnT-V a promising target for drug development. However, the molecular basis of GnT-V's catalytic mechanism and substrate specificity are not fully understood. Here, we report crystal structures of human GnT-V luminal domain with a substrate analog. GnT-V luminal domain is composed of a GT-B fold and two accessary domains. Interestingly, two aromatic rings sandwich the α1-6 branch of the acceptor N-glycan and restrain the global conformation, partly explaining the fine branch specificity of GnT-V. In addition, interaction of the substrate N-glycoprotein with GnT-V likely contributes to protein-selective and site-specific glycan modification. In summary, the acceptor-GnT-V complex structure suggests a catalytic mechanism, explains the previously observed inhibition of GnT-V by branching enzyme GnT-III, and provides a basis for the rational design of drugs targeting N-glycan branching.

An anti-peptide monoclonal antibody recognizing the tobacco etch virus protease-cleavage sequence and its application to a tandem tagging system.

Peptide-based affinity tags are commonly used in recombinant production/purification of proteins, and are often preceded or followed by a protease recognition sequence to allow tag removal. We describe a rat monoclonal antibody 2H5 recognizing an undecapeptide tag called "eTev", which contains a recognition sequence for Tobacco Etch Virus (TEV) protease. In the crystal structure of 2H5-eTev complex, the long eTev peptide assumes compact α-helical conformation in the binding groove, exposing both ends to the solution. This architecture allowed us to connect eTev with another peptide tag called PA tag via linker sequence, ensuring the simultaneous access of two anti-tag antibodies. When this tandem double tag was attached at one end of various proteins, it enabled highly sensitive and protein-independent detection by sandwich ELISA. Utilizing this system during a rapid cell line screening, we succeeded in isolating stable cell clones expressing high level of mouse Wise protein.

Fv-clasp: An Artificially Designed Small Antibody Fragment with Improved Production Compatibility, Stability, and Crystallizability.

Antibody fragments are frequently used as a "crystallization chaperone" to aid structural analysis of complex macromolecules that are otherwise crystallization resistant, but conventional fragment formats have not been designed for this particular application. By fusing an anti-parallel coiled-coil structure derived from the SARAH domain of human Mst1 kinase to the variable region of an antibody, we succeeded in creating a novel chimeric antibody fragment of ∼37 kDa, termed "Fv-clasp," which exhibits excellent crystallization compatibility while maintaining the binding ability of the original IgG molecule. The "clasp" and the engineered disulfide bond at the bottom of the Fv suppressed the internal mobility of the fragment and shielded hydrophobic residues, likely contributing to the high heat stability and the crystallizability of the Fv-clasp. Finally, Fv-clasp antibodies showed superior "chaperoning" activity over conventional Fab fragments, and facilitated the structure determination of an ectodomain fragment of integrin α6ß1.

Mechanistic basis for the recognition of laminin-511 by α6ß1 integrin.

Laminins regulate diverse cellular functions through interaction with integrins. Two regions of laminins-three laminin globular domains of the α chain (LG1-3) and the carboxyl-terminal tail of the γ chain (γ-tail)-are required for integrin binding, but it remains unclear how the γ-tail contributes to the binding. We determined the crystal structure of the integrin binding fragment of laminin-511, showing that the γ-tail extends to the bottom face of LG1-3. Electron microscopic imaging combined with biochemical analyses showed that integrin binds to the bottom face of LG1-3 with the γ1-tail apposed to the metal ion-dependent adhesion site (MIDAS) of integrin ß1. These findings are consistent with a model in which the γ-tail coordinates the metal ion in the MIDAS through its Glu residue.

Allosteric Inhibition of a Semaphorin 4D Receptor Plexin B1 by a High-Affinity Macrocyclic Peptide.

Semaphorin axonal guidance factors are multifunctional proteins that play important roles in immune response, cancer cell proliferation, and organogenesis, making semaphorins and their signaling receptor plexins important drug targets for various diseases. However, the large and flat binding surface of the semaphorin-plexin interaction interface is difficult to target by traditional small-molecule drugs. Here, we report the discovery of a high-affinity plexin B1 (PlxnB1)-binding macrocyclic peptide, PB1m6 (KD = 3.5 nM). PB1m6 specifically inhibited the binding of physiological ligand semaphorin 4D (Sema4D) in vitro and completely suppressed Sema4D-induced cell collapse. Structural studies revealed that PB1m6 binds at a groove between the fifth and sixth blades of the sema domain in PlxnB1 distant from the Sema4D-binding site, indicating the non-competitive and allosteric nature of the inhibitory activity. The discovery of this novel allosteric site can potentially be used to target plexin family proteins for the development of drugs that modulate semaphorin and plexin signaling.

Structural basis for multi-specific peptide recognition by the anti-IDH1/2 monoclonal antibody, MsMab-1.

A point mutation in isocitrate dehydrogenase 1 (IDH1) and IDH2 is directly linked to the pathogenesis of certain types of tumors. To detect this mutation, several antibodies that can distinguish between mutant and wild-type enzymes have been established. One of which, MsMab-1, has a unique multi-specific character against several types of mutated IDH1/2. This promiscuous character is in remarkable contrast to the highly specific antigen recognition typically observed with a monoclonal antibody. We solved the crystal structure of MsMab-1 Fab fragment in complex with either IDH1 or IDH2-derived peptides. Based on the structure, it became clear that the peptide-binding pocket of the antibody is highly complementary to the core determinant shared between the IDH1 and IDH2, while leaving just enough space for the side chain of the pathogenic but not the wild-type amino acids located in the mutation position. Clarification of the molecular basis for the peculiar binding characteristics of MsMab-1 in atomic detail will help facilitating its diagnostic application, and may be used to develop better diagnostic reagents through structure-guided protein engineering.

Tailored placement of a turn-forming PA tag into the structured domain of a protein to probe its conformational state.

Placement of a tag sequence is usually limited to either terminal end of the target protein, reducing the potential of epitope tags for various labeling applications. The PA tag is a dodecapeptide (GVAMPGAEDDVV) that is recognized by a high-affinity antibody NZ-1. We determined the crystal structure of the PA-tag-NZ-1 complex and found that NZ-1 recognizes a central segment of the PA tag peptide in a tight ß-turn configuration, suggesting that it is compatible with the insertion into a loop. This possibility was tested and confirmed using multiple integrin subunits and semaphorin. More specifically, the PA tag can be inserted at multiple locations within the integrin αIIb subunit (encoded by ITGA2B) of the fibrinogen receptor αIIbß3 integrin (of which the ß3 subunit is encoded by ITGB3) without affecting the structural and functional integrity, while maintaining its high affinity for NZ-1. The large choice of the sites for 'epitope grafting' enabled the placement of the PA tag at a location whose accessibility is modulated during the biological action of the receptor. Thus, we succeeded in converting a general anti-tag antibody into a special anti-integrin antibody that can be classified as a ligand-induced binding site antibody.

Structural basis for amyloidogenic peptide recognition by sorLA.

SorLA is a neuronal sorting receptor considered to be a major risk factor for Alzheimer's disease. We have recently reported that it directs lysosomal targeting of nascent neurotoxic amyloid-ß (Aß) peptides by directly binding Aß. Here, we determined the crystal structure of the human sorLA domain responsible for Aß capture, Vps10p, in an unbound state and in complex with two ligands. Vps10p assumes a ten-bladed ß-propeller fold with a large tunnel at the center. An internal ligand derived from the sorLA propeptide bound inside the tunnel to extend the ß-sheet of one of the propeller blades. The structure of the sorLA Vps10p-Aß complex revealed that the same site is used. Peptides are recognized by sorLA Vps10p in redundant modes without strict dependence on a particular amino acid sequence, thus suggesting a broad specificity toward peptides with a propensity for ß-sheet formation.

Lysosomal sorting of amyloid-ß by the SORLA receptor is impaired by a familial Alzheimer's disease mutation.

SORLA/SORL1 is a unique neuronal sorting receptor for the amyloid precursor protein that has been causally implicated in both sporadic and autosomal dominant familial forms of Alzheimer's disease (AD). Brain concentrations of SORLA are inversely correlated with amyloid-ß (Aß) in mouse models and AD patients, suggesting that increasing expression of this receptor could be a therapeutic option for decreasing the amount of amyloidogenic products in affected individuals. We characterize a new mouse model in which SORLA is overexpressed, and show a decrease in Aß concentrations in mouse brain. We trace the underlying molecular mechanism to the ability of this receptor to direct lysosomal targeting of nascent Aß peptides. Aß binds to the amino-terminal VPS10P domain of SORLA, and this binding is impaired by a familial AD mutation in SORL1. Thus, loss of SORLA's Aß sorting function is a potential cause of AD in patients, and SORLA may be a new therapeutic target for AD drug development.

Crystal structures of carbohydrate recognition domain of blood dendritic cell antigen-2 (BDCA2) reveal a common domain-swapped dimer.

We report on crystal structures of a carbohydrate recognition domain (CRD) of human C-type lectin receptor blood dendritic cell antigen-2 (BDCA2). Three different crystal forms were obtained at 1.8-2.3 Å resolution. In all three, the CRD has a basic C-type lectin fold, but a long loop extends away from the core domain to form a domain-swapped dimer. The structures of the dimers from the three different crystal forms superimpose well, indicating that domain swapping and dimer formation are energetically stable. The structure of the dimer is compared with other domain-swapped proteins, and a possible regulation mechanism of BDCA2 is discussed.

Functional importance of covalent homodimer of reelin protein linked via its central region.

Reelin is a 3461-residue secreted glycoprotein that plays a critical role in brain development through its action on target neurons. Although it is known that functional reelin protein exists as multimer formed by interchain disulfide bond(s) as well as through non-covalent interactions, the chemical nature of the multimer assembly has been elusive. In the present study, we identified, among 122 cysteines present in full-length reelin, the single critical cysteine residue (Cys(2101)) responsible for the covalent multimerization. C2101A mutant reelin failed to assemble into disulfide-bonded multimers, whereas it still exhibited non-covalently associated high molecular weight oligomeric states in solution. Detailed analysis of tryptic fragments produced from the purified reelin proteins revealed that the minimum unit of the multimer is a homodimeric reelin linked via Cys(2101) present in the central region and that this cysteine does not connect to the N-terminal region of reelin, which had been postulated as the primary oligomerization domain. A surface plasmon resonance binding assay confirmed that C2101A mutant reelin retained binding capability toward two neuronal receptors apolipoprotein E receptor 2 and very low density lipoprotein receptor. However, it failed to show signaling activity in the assay using the cultured neurons. These results indicate that an intact higher order architecture of reelin multimer maintained by both Cys(2101)-mediated homodimerization and other non-covalent association present elsewhere in the reelin primary structure are essential for exerting its full biological activity.

Deduced RNA binding mechanism of ThiI based on structural and binding analyses of a minimal RNA ligand.

ThiI catalyzes the thio-introduction reaction to tRNA, and a truncated tRNA consisting of 39 nucleotides, TPHE39A, is the minimal RNA substrate for modification by ThiI from Escherichia coli. To examine the molecular basis of the tRNA recognition by ThiI, we have solved the crystal structure of TPHE39A, which showed that base pairs in the T-stem were almost completely disrupted, although those in the acceptor-stem were preserved. Gel shift assays and isothermal titration calorimetry experiments showed that ThiI can efficiently bind with not only tRNA(Phe) but also TPHE39A. Binding assays using truncated ThiI, i.e., N- and C-terminal domains of ThiI, showed that the N-domain can bind with both tRNA(Phe) and TPHE39A, whereas the C-domain cannot. These results indicated that the N-domain of ThiI recognizes the acceptor-stem region. Thermodynamic analysis indicated that the C-domain also affects RNA binding by its enthalpically favorable, but entropically unfavorable, contribution. In addition, circular dichroism spectra showed that the C-domain induced a conformation change in tRNA(Phe). Based on these results, a possible RNA binding mechanism of ThiI in which the N-terminal domain recognizes the acceptor-stem region and the C-terminal region causes a conformational change of RNA is proposed.

Structural and functional analysis of a glycoside hydrolase family 97 enzyme from Bacteroides thetaiotaomicron.

SusB, an 84-kDa alpha-glucoside hydrolase involved in the starch utilization system (sus) of Bacteroides thetaiotaomicron, belongs to glycoside hydrolase (GH) family 97. We have determined the enzymatic characteristics and the crystal structures in free and acarbose-bound form at 1.6A resolution. SusB hydrolyzes the alpha-glucosidic linkage, with inversion of anomeric configuration liberating the beta-anomer of glucose as the reaction product. The substrate specificity of SusB, hydrolyzing not only alpha-1,4-glucosidic linkages but also alpha-1,6-, alpha-1,3-, and alpha-1,2-glucosidic linkages, is clearly different from other well known glucoamylases belonging to GH15. The structure of SusB was solved by the single-wavelength anomalous diffraction method with sulfur atoms as anomalous scatterers using an in-house x-ray source. SusB includes three domains as follows: the N-terminal, catalytic, and C-terminal domains. The structure of the SusB-acarbose complex shows a constellation of carboxyl groups at the catalytic center; Glu532 is positioned to provide protonic assistance to leaving group departure, with Glu439 and Glu508 both positioned to provide base-catalyzed assistance for inverting nucleophilic attack by water. A structural comparison with other glycoside hydrolases revealed significant similarity between the catalytic domain of SusB and those of alpha-retaining glycoside hydrolases belonging to GH27, -36, and -31 despite the differences in catalytic mechanism. SusB and the other retaining enzymes appear to have diverged from a common ancestor and individually acquired the functional carboxyl groups during the process of evolution. Furthermore, sequence comparison of the active site based on the structure of SusB indicated that GH97 included both retaining and inverting enzymes.

Crystal structure of Cel44A, a glycoside hydrolase family 44 endoglucanase from Clostridium thermocellum.

The crystal structure of Cel44A, which is one of the enzymatic components of the cellulosome of Clostridium thermocellum, was solved at a resolution of 0.96 A. This enzyme belongs to glycoside hydrolase family (GH family) 44. The structure reveals that Cel44A consists of a TIM-like barrel domain and a beta-sandwich domain. The wild-type and the E186Q mutant structures complexed with substrates suggest that two glutamic acid residues, Glu(186) and Glu(359), are the active residues of the enzyme. Biochemical experiments were performed to confirm this idea. The structural features indicate that GH family 44 belongs to clan GH-A and that the reaction catalyzed by Cel44A is retaining type hydrolysis. The stereochemical course of hydrolysis was confirmed by a (1)H NMR experiment using the reduced cellooligosaccharide as a substrate.

Structural basis of CoA recognition by the Pyrococcus single-domain CoA-binding proteins.

The single-domain coenzyme A (CoA)-binding protein is conserved in bacteria, archaea, and a few eukaryal taxa. It consists of a Rossmann-fold domain, belonging to the FAD/NAD(P)-binding ;superfamily. The crystal structure of the Thermus thermophilus single-domain CoA-binding protein, TTHA1899, has been determined and it has been demonstrated, by isothermal titration calorimetry, that the protein interacts with CoA [Wada T. et al. Acta Crystallogr D Biol Crystallogr 59 (2003) 1213]. In the present study, we determined the crystal structures of an orthologous protein from the archaeon Pyrococcus horikoshii (PH1109), alone and complexed with CoA, at 1.65 A and 1.70 A resolutions, respectively, and that of P. furiosus protein (PF0725) in the CoA-bound form at 1.70 A. The CoA-bound structures are very similar to each other, revealing that the Pyrococcus proteins bind CoA in a 1:1 stoichiometry. Five loop-containing regions form the CoA-binding groove, to which the CoA molecule is docked. A comparison of the structures and the sequences of the Pyrococcus proteins with those of the T. theromphilus orthologue TTHA1899 indicated that archaeal and bacterial single-domain CoA-binding proteins share the same CoA-binding mode. Nevertheless, many of the peripheral residues involved in the hydrogen-bonding/electrostatic interactions with CoA are not strictly conserved in the family. The CoA interaction of the single-domain CoA-binding proteins is significantly different and much more extensive than that of the multi-subunit/multi-domain CoA-binding protein succinyl-CoA synthetase.

Comparison of phasing methods for sulfur-SAD using in-house chromium radiation: case studies for standard proteins and a 69 kDa protein.

Phasing of the crystal structures of four standard proteins (lysozyme, trypsin, glucose isomerase and thaumatin) and a novel 69 kDa protein from Thermus thermophilus, TT0570, was performed using the single-wavelength anomalous diffraction of S atoms intrinsically present within the native protein molecules. To utilize the sulfur anomalous diffraction, the data sets were collected using the loopless data-collection method with chromium Kalpha X-rays of wavelength 2.29 A. Three phasing methods, MLPHARE, SHARP and OASIS-2004, were tested in combination with the DM or SOLOMON density-modification method. The results showed that the solvent contents are still an important factor for phasing with the S-SAD method, even when longer wavelength Cr Kalpha radiation is used. Of the three procedures, the improved direct phasing of OASIS-2004 with its implemented fragment feedback to the direct-method probability calculation gave the best results in determining the initial phases. For all five proteins, almost the entire models could be built automatically.