ABSTRACT
The FinRay soft gripper achieves passive enveloping grasping through its functional flexible structure, adapting to the contact configuration of the object to be grasped. However, variations in beam position and thickness lead to different behaviors, making it important to research the relationship between structure and force. Conventional research using FEM simulations has tested various virtual FinRay models but replicating phenomena such as buckling and slipping has been challenging. While hardware-based methods that involve installing sensors on the gripper and the object to analyze their states have been attempted, no studies have focused on the tangential contact force related to slipping. Therefore, we developed a 16-way object contact force measurement device incorporating two-axis force sensors into each of the 16 segmented objects and compared the normal and tangential components of the enveloping grasping force of the FinRay soft gripper under two types of contact friction conditions. In the first experiment, the proposed device was compared with a device containing a six-axis force sensor in one segmented object, confirming that the proposed device has no issues with measurement performance. In the second experiment, comparisons of the proposed device were made under various conditions: two contact friction states, three object contact positions, and two object motion states. The results demonstrated that the proposed device could decompose and analyze the grasping force into its normal and tangential components for each segmented object. Moreover, low friction conditions result in a wide contact area with lower tangential frictional force and a uniform normal pushing force, achieving effective enveloping grasping.
ABSTRACT
The Fin Ray-type soft gripper (FRSG) is a typical soft gripper structure and applies the deformation characteristics of the Fin Ray structure. This structure functions to stabilize the grasping of an object by passive deformation due to external forces. To analyze the performance of detailed force without compromising the actual FRSG characteristics, it is effective to incorporate multiple force sensors into the grasping object without installing them inside the Fin Ray structure. Since the grasping characteristics of the FRSG are greatly affected by the arrangement of the crossbeams, it is also important to understand the correspondence between the forces and the geometry. In addition, the grasping characteristics of an angular object have not been verified in actual equipment. Therefore, in this study, a contact force measurement device with 16 force sensors built into the grasping object and a structural deformation measurement device using camera images were used to analyze the correspondence between force and structural deformation on an actual FRSG. In the experiment, we analyzed the influence of the crossbeam arrangement on the grasping force and the grasping conditions of the square (0°) and rectangular (45°) shapes, and state that an ideal grasp in a square-shaped (45°) grasp is possible if each crossbeam in the FRSG is arranged at a different angle.
ABSTRACT
The purpose of this paper is to quickly and stably achieve grasping objects with a 3D robot arm controlled by electrooculography (EOG) signals. A EOG signal is a biological signal generated when the eyeballs move, leading to gaze estimation. In conventional research, gaze estimation has been used to control a 3D robot arm for welfare purposes. However, it is known that the EOG signal loses some of the eye movement information when it travels through the skin, resulting in errors in EOG gaze estimation. Thus, EOG gaze estimation is difficult to point out the object accurately, and the object may not be appropriately grasped. Therefore, developing a methodology to compensate, for the lost information and increase spatial accuracy is important. This paper aims to realize highly accurate object grasping with a robot arm by combining EMG gaze estimation and the object recognition of camera image processing. The system consists of a robot arm, top and side cameras, a display showing the camera images, and an EOG measurement analyzer. The user manipulates the robot arm through the camera images, which can be switched, and the EOG gaze estimation can specify the object. In the beginning, the user gazes at the screen's center position and then moves their eyes to gaze at the object to be grasped. After that, the proposed system recognizes the object in the camera image via image processing and grasps it using the object centroid. The object selection is based on the object centroid closest to the estimated gaze position within a certain distance (threshold), thus enabling highly accurate object grasping. The observed size of the object on the screen can differ depending on the camera installation and the screen display state. Therefore, it is crucial to set the distance threshold from the object centroid for object selection. The first experiment is conducted to clarify the distance error of the EOG gaze estimation in the proposed system configuration. As a result, it is confirmed that the range of the distance error is 1.8-3.0 cm. The second experiment is conducted to evaluate the performance of the object grasping by setting two thresholds from the first experimental results: the medium distance error value of 2 cm and the maximum distance error value of 3 cm. As a result, it is found that the grasping speed of the 3 cm threshold is 27% faster than that of the 2 cm threshold due to more stable object selection.