An open access resource for functional brain connectivity from fully awake marmosets.

The common marmoset (Callithrix jacchus) is quickly gaining traction as a premier neuroscientific model. However, considerable progress is still needed in understanding the functional and structural organization of the marmoset brain to rival that documented in longstanding preclinical model species, like mice, rats, and Old World primates. To accelerate such progress, we present the Marmoset Functional Brain Connectivity Resource (marmosetbrainconnectome.org), currently consisting of over 70 h of resting-state fMRI (RS-fMRI) data acquired at 500 µm isotropic resolution from 31 fully awake marmosets in a common stereotactic space. Three-dimensional functional connectivity (FC) maps for every cortical and subcortical gray matter voxel are stored online. Users can instantaneously view, manipulate, and download any whole-brain functional connectivity (FC) topology (at the subject- or group-level) along with the raw datasets and preprocessing code. Importantly, researchers can use this resource to test hypotheses about FC directly - with no additional analyses required - yielding whole-brain correlations for any gray matter voxel on demand. We demonstrate the resource's utility for presurgical planning and comparison with tracer-based neuronal connectivity as proof of concept. Complementing existing structural connectivity resources for the marmoset brain, the Marmoset Functional Brain Connectivity Resource affords users the distinct advantage of exploring the connectivity of any voxel in the marmoset brain, not limited to injection sites nor constrained by regional atlases. With the entire raw database (RS-fMRI and structural images) and preprocessing code openly available for download and use, we expect this resource to be broadly valuable to test novel hypotheses about the functional organization of the marmoset brain.

Receiver phase alignment using fitted SVD derived sensitivities from routine prescans.

Magnetic resonance imaging radio frequency arrays are composed of multiple receive coils that have their signals combined to form an image. Combination requires an estimate of the radio frequency coil sensitivities to align signal phases and prevent destructive interference. At lower fields this can be accomplished using a uniform physical reference coil. However, at higher fields, uniform volume coils are lacking and, when available, suffer from regions of low receive sensitivity that result in poor sensitivity estimation and combination. Several approaches exist that do not require a physical reference coil but require manual intervention, specific prescans, or must be completed post-acquisition. This makes these methods impractical for large multi-volume datasets such as those collected for novel types of functional MRI or quantitative susceptibility mapping, where magnitude and phase are important. This pilot study proposes a fitted SVD method which utilizes existing combination methods to create a phase sensitive combination method targeted at large multi-volume datasets. This method uses any multi-image prescan to calculate the relative receive sensitivities using voxel-wise singular value decomposition. These relative sensitivities are fitted to the solid harmonics using an iterative least squares fitting algorithm. Fits of the relative sensitivities are used to align the phases of the receive coils and improve combination in subsequent acquisitions during the imaging session. This method is compared against existing approaches in the human brain at 7 Tesla by examining the combined data for the presence of singularities and changes in phase signal-to-noise ratio. Two additional applications of the method are also explored, using the fitted SVD method in an asymmetrical coil and in a case with subject motion. The fitted SVD method produces singularity-free images and recovers between 95-100% of the phase signal-to-noise ratio depending on the prescan data resolution. Using solid harmonic fitting to interpolate singular value decomposition derived receive sensitivities from existing prescans allows the fitted SVD method to be used on all acquisitions within a session without increasing exam duration. Our fitted SVD method is able to combine imaging datasets accurately without supervision during online reconstruction.

Effects of phase regression on high-resolution functional MRI of the primary visual cortex.

High-resolution functional MRI studies have become a powerful tool to non-invasively probe the sub-millimeter functional organization of the human cortex. Advances in MR hardware, imaging techniques and sophisticated post-processing methods have allowed high resolution fMRI to be used in both the clinical and academic neurosciences. However, consensus within the community regarding the use of gradient echo (GE) or spin echo (SE) based acquisition remains largely divided. On one hand, GE provides a high temporal signal-to-noise ratio (tSNR) technique sensitive to both the macro- and micro-vascular signal while SE based methods are more specific to microvasculature but suffer from lower tSNR and specific absorption rate limitations, especially at high field and with short repetition times. Fortunately, the phase of the GE-EPI signal is sensitive to vessel size and this provides a potential avenue to reduce the macrovascular weighting of the signal (phase regression, Menon 2002). In order to determine the efficacy of this technique at high-resolution, phase regression was applied to GE-EPI timeseries and compared to SE-EPI to determine if GE-EPI's specificity to the microvascular compartment improved. To do this, functional data was collected from seven subjects on a neuro-optimized 7 T system at 800 µm isotropic resolution with both GE-EPI and SE-EPI while observing an 8 Hz contrast reversing checkerboard. Phase data from the GE-EPI was used to create a microvasculature-weighted time series (GE-EPI-PR). Anatomical imaging (MP2RAGE) was also collected to allow for surface segmentation so that the functional results could be projected onto a surface. A multi-echo gradient echo sequence was collected and used to identify venous vasculature. The GE-EPI-PR surface activation maps showed a high qualitative similarity with SE-EPI and also produced laminar activity profiles similar to SE-EPI. When the GE-EPI and GE-EPI-PR distributions were compared to SE-EPI it was shown that GE-EPI-PR had similar distribution characteristics to SE-EPI (p < 0.05) across the top 60% of cortex. Furthermore, it was shown that GE-EPI-PR has a higher contrast-to-noise ratio (0.5 ± 0.2, mean ± std. dev. across layers) than SE-EPI (0.27 ± 0.07) demonstrating the technique has higher sensitivity than SE-EPI. Taken together this evidence suggests phase regression is a useful method in low SNR studies such as high-resolution fMRI.

Radiofrequency coil for routine ultra-high-field imaging with an unobstructed visual field.

Many neuroscience applications have adopted functional MRI as a tool to investigate the healthy and diseased brain during the completion of a task. While ultra-high-field MRI has allowed for improved contrast and signal-to-noise ratios during functional MRI studies, it remains a challenge to create local radiofrequency coils that can accommodate an unobstructed visual field and be suitable for routine use, while at the same time not compromise performance. Performance (both during transmission and reception) can be improved by using close-fitting coils; however, maintaining sensitivity over the whole brain often requires the introduction of coil elements proximal to the eyes, thereby partially occluding the subject's visual field. This study presents a 7 T head coil, with eight transmit dipoles and 32 receive loops, that is designed to remove visual obstructions from the subject's line of sight, allowing for an unencumbered view of visual stimuli, the reduction of anxiety induced from small enclosures, and the potential for eye-tracking measurements. The coil provides a practical solution for routine imaging, including a split design (anterior and posterior halves) that facilitates subject positioning, including those with impaired mobility, and the placement of devices required for patient comfort and motion reduction. The transmit and receive coils displayed no degradation of performance due to adaptions to the design topology (both mechanical and electrical) required to create an unobstructed visual field. All computer-aided design files, electromagnetic simulation models, transmit field maps and local specific absorption rate matrices are provided to promote reproduction.

Elimination of low-inversion-efficiency induced artifacts in whole-brain MP2RAGE using multiple RF-shim configurations at 7 T.

The magnetization-prepared two-rapid-gradient-echo (MP2RAGE) sequence is used for structural T1 -weighted imaging and T1 mapping of the human brain. In this sequence, adiabatic inversion RF pulses are commonly used, which require the B1+ magnitude to be above a certain threshold. Achieving this threshold in the whole brain may not be possible at ultra-high fields because of the short RF wavelength. This results in low-inversion regions especially in the inferior brain (eg cerebellum and temporal lobes), which is reflected as regions of bright signal in MP2RAGE images. This study aims at eliminating the low-inversion-efficiency induced artifacts in MP2RAGE images at 7 T. The proposed technique takes advantage of parallel RF transmission systems by splitting the brain into two overlapping slabs and calculating the complex weights of transmit channels (ie RF shims) on these slabs for excitation and inversion independently. RF shims were calculated using fast methods implemented in the standard workflow. The excitation RF pulse was designed to obtain slabs with flat plateaus and sharp edges. These slabs were joined into a single volume during the online image reconstruction. The two-slab strategy naturally results in a signal-to-noise ratio loss; however, it allowed the use of independent shims to make the B1+ field exceed the adiabatic threshold in the inferior brain, eliminating regions of low inversion efficiency. Accordingly, the normalized root-mean-square errors in the inversion were reduced to below 2%. The two-slab strategy was found to outperform subject-specific kT -point inversion RF pulses in terms of inversion error. The proposed strategy is a simple yet effective method to eliminate low-inversion-efficiency artifacts; consequently, MP2RAGE-based, artifact-free T1 -weighted structural images were obtained in the whole brain at 7 T.

Demonstration and suppression of respiration-related artifacts in Bloch-Siegert shift-based B1+ maps of the human brain.

Respiration-induced movement of the chest wall and internal organs causes temporal B0 variations extending throughout the brain. This study demonstrates that these variations can cause significant artifacts in B1+ maps obtained at 7 T with the Bloch-Siegert shift (BSS) B1+ mapping technique. To suppress these artifacts, a navigator correction scheme was proposed. Two sets of experiments were performed. In the first set of experiments, phase shifts induced by respiration-related B0 variations were assessed for five subjects at 7 T by using a gradient echo (GRE) sequence without phase-encoding. In the second set of experiments, B1+ maps were acquired using a GRE-based BSS pulse sequence with navigator echoes. For this set, the measurements were consecutively repeated 16 times for the same imaging slice. These measurements were averaged to obtain the reference B1+ map. Due to the periodicity of respiration-related phase shifts, their effect on the reference B1+ map was assumed to be negligible through averaging. The individual B1+ maps of the 16 repetitions were calculated with and without using the proposed navigator scheme. These maps were compared with the B1+ reference map. The peak-to-peak value of respiration-related phase shifts varied between subjects. Without navigator correction, the interquartile range of percentage error in B1+ varied between 4.0% and 8.3% among subjects. When the proposed navigator scheme was used, these numbers were reduced to 2.5% and 2.9%, indicating an improvement in the precision of GRE-based BSS B1+ mapping at high magnetic fields.

Open-source hardware designs for MRI of mice, rats, and marmosets: Integrated animal holders and radiofrequency coils.

BACKGROUND: Small-animal MRI is an important investigative tool for basic and preclinical research. High-resolution anatomical and functional studies of the brain require artifact-free images that are acquired with a highly sensitive radiofrequency (RF) coil. NEW METHOD: The animal holder plays an important role in mitigating image artifacts: motion artifacts are reduced by immobilizing the animal and geometric-distortion artifacts are reduced by accurately positioning the animal to improve static-field shimming. The RF coil, in turn, must provide high sensitivity over the whole brain and not physically interfere with the animal holder. To accomplish these tasks, the animal holder and RF coil should be designed in tandem. In this manuscript, animal holders and RF coils for mice, rats, and marmoset monkeys are described. Each animal holder includes components for anesthesia delivery and animal immobilization, as well as a compatible receive coil. RESULTS/COMPARISON WITH EXISTING METHOD(S): Animal holders were capable of accurate and reproducible positioning (for the marmoset, this was in the stereotactic plane), consequently reducing geometric distortion in echo-planar images. Ear bars were designed in conjunction with receive-coil formers, thereby maximizing the sensitive region of coils, while concurrently reducing motion to less than a pixel over EPI time series. Motion and SNR were quantified to facilitate direct comparison to existing animal holders and RF coils. All computer-aided-design (CAD) files of animal holders and RF coils are provided to promote dissemination. CONCLUSIONS: The confluence of design between the animal holder and RF coil provides a pragmatic solution for routine imaging of small animals.

Prediction of radiation necrosis in a rodent model using magnetic resonance imaging apparent transverse relaxation ([Formula: see text]).

BACKGROUND AND PURPOSE: Radiation necrosis remains an irreversible long-term side-effect following radiotherapy to the brain. The ability to predict areas that could ultimately develop into necrosis could lead to prevention and management of radiation necrosis. MATERIALS AND METHODS: Fischer 344 rats were irradiated using two platforms (micro-CT irradiator and x-Rad 225 IGRT) with radiation up to 30 Gy for the micro-CT and 40 Gy for the xRAD-224 to half the brain. Animals were subsequently imaged using a 9.4 T MRI scanner every 2-4 weeks for up to 28 weeks using a 7-echo gradient echo sequence. The apparent transverse relaxation constant ([Formula: see text]) was calculated and retrospectively analyzed. RESULTS: Animals irradiated with the low-dose rate micro-CT did not exhibit any symptoms or imaging changes associated with RN. Animals irradiated with the xRAD-225 exhibited imaging changes consistent with RN at week 24. Analysis of the [Formula: see text] coefficient within the lesion and hippocampus shows the potential for detection of RN up to 10 weeks prior to morphological changes. CONCLUSIONS: The ability to predict areas of RN and increases of [Formula: see text] within the hippocampus provides a method for long-term monitoring and prediction of RN.

Apparent transverse relaxation (R2∗) on MRI as a method to differentiate treatment effect (pseudoprogression) versus progressive disease in chemoradiation for malignant glioma.

INTRODUCTION: Pseudoprogression (psPD) is a transient post-treatment imaging change that is commonly seen when treating glioma with chemotherapy and radiation. The use of apparent transverse relaxation rate (R2∗), which is calculated from a contrast-free multi-echo gradient echo Magnetic Resonance Imaging (MRI) sequence, may allow for quantitative identification of patients with suspected psPD. METHODS: We acquired a multi-echo gradient echo sequence using a 3T-Siemens Prisma MRI. The signal decay through the echoes was fitted to provide the R2∗ coefficient. We segmented the T1 -gadolinium enhancing the image to provide a contrast enhancing lesion (CEL) and the FLAIR hyperintensity to provide a non-enhancing lesion (NEL). These regions of interest were applied to the multi-echo gradient echo to acquire a mean R2∗ within the CEL and NEL. We additionally acquired ADC data to attempt to corroborate our findings. RESULTS: We found that patients who later exhibited PD exhibited a higher R2∗ within the CEL as well as a higher ratio of CEL to NEL. Our data correctly distinguished pseudoprogression from treatment effect in 9/9 patients, while ADC corrected identified 7/9 patients using an absolute ADC of 1200 × 10-6  mm2 /s. CONCLUSIONS: Our method seems promising for the accurate identification of psPD, and the technique is amenable to evaluation in larger, multi-centre patient cohorts.

A geometrically adjustable receive array for imaging marmoset cohorts.

The common marmoset (Callithrix jacchus) is an increasingly popular animal model for translational neuroscience studies, during which anatomical and functional MRI can be useful investigative tools. To attain the requisite SNR for high-resolution acquisitions, the radiofrequency coil must be optimized for the marmoset; however, relatively few custom coils have been developed that maximize SNR and are compatible with accelerated acquisitions. For the study of large populations of animals, the heterogeneity in animal size reduces the effectiveness of a "one size fits all" approach to coil sizing and makes coils tailored to individual animals cost and time prohibitive. The approach taken in this study was to create an 8-channel phased-array receive coil that was adjustable to the width of the marmoset head, thereby negating the need for tailored coils while still maintaining high SNR. Two marmosets of different size were imaged on a 9.4-T small-animal scanner. Consistent SNR was achieved in the periphery of the brain between head sizes. When compared to a 15-channel, "one size fits all" receive coil, the adjustable coil achieved 57% higher SNR in the superior frontal and parietal cortices and 29% higher SNR in the centre of the brain. The mean geometry factor of the adjustable coil was less than 1.2 for a 2-fold reduction factor in the left-right and anterior-posterior directions. Geometry factors were compared to the 15-channel coil to guide future designs. The adjustable coil was shown to be a practical means for anatomical and echo-planar imaging of marmoset cohorts.

Origins of R2* orientation dependence in gray and white matter.

Estimates of the apparent transverse relaxation rate (R2*) can be used to quantify important properties of biological tissue. Surprisingly, the mechanism of R2* dependence on tissue orientation is not well understood. The primary goal of this paper was to characterize orientation dependence of R2* in gray and white matter and relate it to independent measurements of two other susceptibility based parameters: the local Larmor frequency shift (fL) and quantitative volume magnetic susceptibility (Δχ). Through this comparative analysis we calculated scaling relations quantifying R2' (reversible contribution to the transverse relaxation rate from local field inhomogeneities) in a voxel given measurements of the local Larmor frequency shift. R2' is a measure of both perturber geometry and density and is related to tissue microstructure. Additionally, two methods (the Generalized Lorentzian model and iterative dipole inversion) for calculating Δχ were compared in gray and white matter. The value of Δχ derived from fitting the Generalized Lorentzian model was then connected to the observed R2* orientation dependence using image-registered optical density measurements from histochemical staining. Our results demonstrate that the R2* and fL of white and cortical gray matter are well described by a sinusoidal dependence on the orientation of the tissue and a linear dependence on the volume fraction of myelin in the tissue. In deep brain gray matter structures, where there is no obvious symmetry axis, R2* and fL have no orientation dependence but retain a linear dependence on tissue iron concentration and hence Δχ.

Slice-by-slice B1+ shimming at 7 T.

Parallel transmission has been used to reduce the inevitable inhomogeneous radiofrequency fields produced in human high-field MRI greater than 3 T. Further improvements in the transmit homogeneity and efficiency are possible by leveraging the additional degree of freedom permitted by multislice acquisitions. Compared to simple scaling of the flip angle to compensate for B1+ falloff along the radiofrequency coil, calculation of B1+ shim solutions on a slice-by-slice basis can markedly improve homogeneity and/or reduce transmitted power and global SAR. Performance measures were acquired at 7 T with a 15-channel head-only transceive array featuring elements distributed over all three logical axes, facilitating B1+ shimming over arbitrary orientations. Compared to a circularly polarized volume mode of the same coil, shimming to maximize excitation efficiency on a slice-by-slice basis yielded improvements in mean B1+ by 12.8±2.4% and a reduction in standard deviation of B1+ of 16.3±6.8%, while reducing relative SAR by 6.2±3.1%. When shimming for greater uniformity, the mean and standard deviation of B1+ were further improved by 15.9±2.6% and 26.2±10.4%, respectively, at the expense of a 135±8% increase in global SAR. Robust multislice-shim solutions are demonstrated that can be quickly calculated, applied in real time, and reliably improve on volume coil modes.

A conformal transceive array for 7 T neuroimaging.

The first 16-channel transceive surface-coil array that conforms to the human head and operates at 298 MHz (7 T) is described. Individual coil elements were decoupled using circumferential shields around each element that extended orthogonally from the former. This decoupling method allowed elements to be constructed with arbitrary shape, size, and location to create a three-dimensional array. Radiofrequency shimming achieved a transmit-field uniformity of 20% over the whole brain and 14% over a single axial slice. During radiofrequency transmission, coil elements couple tightly to the head and reduce the amount of power necessary to achieve a mean 90° flip angle (660-µs and 480-µs pulse lengths were required for a 1-kW hard pulse when shimming over the whole brain and a single axial slice, respectively). During reception, the close proximity of coil elements to the head increases the signal-to-noise ratio in the periphery of the brain, most notably at the superior aspect of the head. The sensitivity profile of each element is localized beneath the respective shield. When combined with the achieved isolation between elements, this results in the capacity for low geometry factors during both transmit and receive: 1.04/1.06 (mean) and 1.25/1.54 (maximum) for 3-by-3 acceleration in the axial/sagittal plane. High cortical signal-to-noise ratio and parallel imaging performance make the conformal coil ideal for the study of high temporal and/or spatial cortical architecture and function.

A radiofrequency coil to facilitate B1⁺ shimming and parallel imaging acceleration in three dimensions at 7 T.

A 15-channel transmit-receive (transceive) radiofrequency (RF) coil was developed to image the human brain at 7 T. A hybrid decoupling scheme was implemented that used both capacitive decoupling and the partial geometric overlapping of adjacent coil elements. The decoupling scheme allowed coil elements to be arrayed along all three Cartesian axes; this facilitated shimming of the transmit field, B1⁺, and parallel imaging acceleration along the longitudinal direction in addition to the standard transverse directions. Each channel was independently controlled during imaging using a 16-channel console and a 16 × 1-kW RF amplifier-matrix. The mean isolation between all combinations of coil elements was 18 ± 7 dB. After B1⁺ shimming, the standard deviation of the transmit field uniformity was 11% in an axial plane and 32% over the entire brain superior to the mid-cerebellum. Transmit uniformity was sufficient to acquire fast spin echo images of this region of the brain with a single B1⁺ shim solution. Signal-to-noise ratio (SNR) maps showed higher SNR in the periphery vs center of the brain, and higher SNR in the occipital and temporal lobes vs the frontal lobe. Parallel imaging acceleration in a rostral-caudal oblique plane was demonstrated. The implication of the number of channels in a transmit-receive coil was discussed: it was determined that improvements in SNR and B1⁺ shimming can be expected when using more than 15 independently controlled transmit-receive channels.

Transmit/receive radiofrequency coil with individually shielded elements.

A novel method for decoupling coil elements of transmit/receive (transceive) arrays is reported. Each element of a coil array is shielded both concentrically and radially to reduce the magnetic flux linkage between neighboring coils; this substantially reduces the mutual inductance between coil elements and allows them to behave independently. A six-channel transceive coil was developed using this decoupling scheme and compared with two conventional decoupling schemes: the partial overlapping of adjacent elements and capacitive decoupling. The radiofrequency coils were designed to image the human head and were tested on a 7-T Varian scanner. The decoupling, transmit uniformity, transmit efficiency, signal-to-noise ratio, and geometry factors were compared between coils. The individually shielded coil achieved higher minimum isolation between elements (2.7-4.0 dB) and lower geometry factors (2-14%) than the overlapped and capacitively decoupled coils, while showing a reduction in transmit efficiency (2.8-5.9 dB) and signal-to-noise ratio (up to 34%). No difference was found in the power absorbed by the sample during a 90° radiofrequency pulse. The inset distance of coil elements within their shields was then reduced, resulting in significant improvement of the transmit efficiency (1.3 dB) and signal-to-noise ratio (28%). The greatest asset of this decoupling method lies in its versatility: transceive coils can be created with elements of arbitrary shape, size, location, and resonant frequency to produce three-dimensional conformal arrays.

Evaluation of preprocessing steps to compensate for magnetic field distortions due to body movements in BOLD fMRI.

Blood oxygenation level-dependent (BOLD) functional magnetic resonance imaging (fMRI) is currently the dominant technique for non-invasive investigation of brain functions. One of the challenges with BOLD fMRI, particularly at high fields, is compensation for the effects of spatiotemporally varying magnetic field inhomogeneities (DeltaB(0)) caused by normal subject respiration and, in some studies, movement of the subject during the scan to perform tasks related to the functional paradigm. The presence of DeltaB(0) during data acquisition distorts reconstructed images and introduces extraneous fluctuations in the fMRI time series that decrease the BOLD contrast-to-noise ratio. Optimization of the fMRI data-processing pipeline to compensate for geometric distortions is of paramount importance to ensure high quality of fMRI data. To investigate DeltaB(0) caused by subject movement, echo-planar imaging scans were collected with and without concurrent motion of a phantom arm. The phantom arm was constructed and moved by the experimenter to emulate forearm motions while subjects remained still and observed a visual stimulation paradigm. These data were then subjected to eight different combinations of preprocessing steps. The best preprocessing pipeline included navigator correction, a complex phase regressor and spatial smoothing. The synergy between navigator correction and phase regression reduced geometric distortions better than either step in isolation and preconditioned the data to make them more amenable to the benefits of spatial smoothing. The combination of these steps provided a 10% increase in t-statistics compared to only navigator correction and spatial smoothing and reduced the noise and false activations in regions where no legitimate effects would occur.

High-field MRSI of the prostate using a transmit/receive endorectal coil and gradient modulated adiabatic localization.

PURPOSE: To demonstrate in vivo magnetic resonance spectroscopic imaging (MRSI) of the human prostate at 4.0T using a transmit/receive endorectal coil and a pulse sequence designed specifically for this application. MATERIALS AND METHODS: A solid, reusable endorectal probe was designed for both radiofrequency transmission and reception. Finite difference time domain (FDTD) simulations were performed to characterize the coil's electric field distribution, and temperature measurements were performed in a beef tissue phantom to determine the coil's safe operating limit. The localization by selective adiabatic refocusing (LASER) pulse sequence was implemented using six gradient modulated offset independent adiabatic (GOIA) pulses for very sharp, B(1)-insensitive voxel localization. RESULTS: Based on the simulations and temperature measurements, the coil's safe operating limit was conservatively estimated to be 1.0W for 15 minutes. The transition width of the GOIA pulse selection profiles was only 6% of the bandwidth, compared with 22% for a specific absorption rate (SAR)-matched conventional adiabatic pulse. Using the coil and pulse sequence described here, MRSI data were successfully acquired from a patient with biopsy-proven prostate cancer, with a nominal voxel size of 0.34 cc in a scan time of 15 minutes. CONCLUSION: This work demonstrates the safe and effective use of a transmit/receive endorectal coil for in vivo MRSI of the prostate.

Hybrid two-dimensional navigator correction: a new technique to suppress respiratory-induced physiological noise in multi-shot echo-planar functional MRI.

A troublesome source of physiological noise in functional magnetic resonance imaging (fMRI) is due to the spatio-temporal modulation of the magnetic field in the brain caused by normal subject respiration. fMRI data acquired using echo-planar imaging are very sensitive to these respiratory-induced frequency offsets, which cause significant geometric distortions in images. Because these effects increase with main magnetic field, they can nullify the gains in statistical power expected by the use of higher magnetic fields. As a study of existing navigator correction techniques for echo-planar fMRI has shown that further improvements can be made in the suppression of respiratory-induced physiological noise, a new hybrid two-dimensional (2D) navigator is proposed. Using a priori knowledge of the slow spatial variations of these induced frequency offsets, 2D field maps are constructed for each shot using spatial frequencies between +/-0.5 cm(-1) in k-space. For multi-shot fMRI experiments, we estimate that the improvement of hybrid 2D navigator correction over the best performance of one-dimensional navigator echo correction translates into a 15% increase in the volume of activation, 6% and 10% increases in the maximum and average t-statistics, respectively, for regions with high t-statistics, and 71% and 56% increases in the maximum and average t-statistics, respectively, in regions with low t-statistics due to contamination by residual physiological noise.

MR compatibility of EEG scalp electrodes at 4 tesla.

PURPOSE: To design and apply a method to quantitatively evaluate the MR compatibility of electroencephalographic (EEG) scalp electrodes based on pulse sequence-independent metrics. MATERIALS AND METHODS: Three types of electrodes (constructed primarily of brass, silver, and conductive plastic, respectively) were tested. B0 field distortions, B1 shielding, and heat induction was measured in adjacent agarose and oil phantoms at 4 T. B0 field maps were corrected for distortions caused by the measurement apparatus and passive shim heating, and projections perpendicular to the surfaces of the electrodes were fit, generating cubic coefficients representing the electrode distortion severity. Signal loss in T2-weighted images was used to determine B1 shielding by the electrodes. Temperature measurements were recorded during the application of a high-power pulse sequence. RESULTS: Significantly different B0 distortions were observed in the three types of electrodes. The B1 shielding detected in all three electrodes is minimal for most human MRI, and no significant heating was detected in the electrodes or adjacent phantom. CONCLUSION: The three types of electrodes were successfully differentiated in terms of MR compatibility based on pulse sequence-independent B0 field distortions.

NMR simulation analysis of statistical effects on quantifying cerebrovascular parameters.

Determining tissue structure and composition from the behavior of the NMR transverse relaxation during free induction decay and spin echo formation has seen significant advances in recent years. In particular, the ability to quantify cerebrovascular network parameters such as blood volume and deoxyhemoglobin concentration from the NMR signal dephasing has seen intense focus. Analytical models have been described, based on statistical averaging of randomly oriented cylinders in both the static and slow diffusion regimes. However, the error in estimates obtained from these models when applied to systems in which the statistical assumptions of many, randomly oriented perturbers are violated has not been systematically investigated. Using a deterministic simulation that can include diffusion, we find that the error in estimated venous blood volume fraction and deoxyhemoglobin concentration obtained using a static dephasing regime statistical model is inversely related to the square root of number of blood vessels. The most important implication of this is that the minimum imaging resolution for accurate deoxyhemoglobin and blood volume estimation is not bound by hardware limitations, but rather by the underlying tissue structure.