Chemistry of Shape-Controlled Iron Oxide Nanocrystal Formation.

Herein, we demonstrate that meticulous and in-depth analysis of the reaction mechanisms of nanoparticle formation is rewarded by full control of the size, shape, and crystal structure of superparamagnetic iron oxide nanocrystals during synthesis. Starting from two iron sources, iron(II) and iron(III) carbonate, a strict separation of oleate formation from the generation of reactive pyrolysis products and concomitant nucleation of iron oxide nanoparticles was achieved. This protocol enabled us to analyze each step of nanoparticle formation independently in depth. The progress of the entire reaction was monitored via matrix-assisted laser desorption ionization time-of-flight mass spectrometry and gas chromatography, thus providing insight into the formation of various iron oleate species prior to nucleation. Interestingly, due to the intrinsic strongly reductive pyrolysis conditions of the oleate intermediates and redox process in early stages of the synthesis, pristine iron oxide nuclei were composed exclusively from wüstite irrespective of the oxidation state of the iron source. Controlling the reaction conditions provided a very broad range of size- and shape-defined monodispersed iron oxide nanoparticles. Curiously, after nucleation, star-shaped nanocrystals were obtained that underwent metamorphism toward cubic-shaped particles. Electron energy loss spectroscopy tomography revealed ex post oxidation of the primary wustite nanocrystal, providing a full 3D image of Fe2+ and Fe3+ distribution within. Overall, we developed a highly flexible synthesis, yielding multi-gram amounts of well-defined iron oxide nanocrystals of different sizes and morphologies.

Metal-Semiconductor Nanoparticle Hybrids Formed by Self-Organization: A Platform to Address Exciton-Plasmon Coupling.

Hybrid nanosystems composed of excitonic and plasmonic constituents can have different properties than the sum of of the two constituents, due to the exciton-plasmon interaction. Here, we report on a flexible model system based on colloidal nanoparticles that can form hybrid combinations by self-organization. The system allows us to tune the interparticle distance and to combine nanoparticles of different sizes and thus enables a systematic investigation of the exciton-plasmon coupling by a combination of optical spectroscopy and quantum-optical theory. We experimentally observe a strong influence of the energy difference between exciton and plasmon, as well as an interplay of nanoparticle size and distance on the coupling. We develop a full quantum theory for the luminescence dynamics and discuss the experimental results in terms of the Purcell effect. As the theory describes excitation as well as coherent and incoherent emission, we also consider possible quantum optical effects. We find a good agreement of the observed and the calculated luminescence dynamics induced by the Purcell effect. This also suggests that the self-organized hybrid system can be used as platform to address quantum optical effects.

A universal approach to ultrasmall magneto-fluorescent nanohybrids.

Seeded emulsion polymerization is a powerful universal method to produce ultrasmall multifunctional magnetic nanohybrids. In a two-step procedure, iron oxide nanocrystals were initially encapsulated in a polystyrene (PS) shell and subsequently used as beads for a controlled assembly of elongated quantum dots/quantum rods (QDQRs). The synthesis of a continuous PS shell allows the whole construct to be fixed and the composition of the nanohybrid to be tuned. The fluorescence of the QDQRs and magnetism of iron oxide were perfectly preserved, as confirmed by single-particle investigation, fluorescence decay measurements, and relaxometry. Bio-functionalization of the hybrids was straightforward, involving copolymerization of appropriate affinity ligands as shown by immunoblot analysis. Additionally, the universality of this method was shown by the embedment of a broad scale of NPs.

Tailoring the ligand shell for the control of cellular uptake and optical properties of nanocrystals.

In this short review, the main challenges in the use of hydrophobic nanoparticles in biomedical application are addressed. It is shown how to overcome the different issues by the use of a polymeric encapsulation system, based on an amphiphilic polyisoprene-block-poly(ethylene glycol) diblock copolymer. On the basis of this simple molecule, the development of a versatile and powerful phase transfer strategy is summarized, focusing on the main advantages like the adjustable size, the retained properties, the excellent shielding and the diverse functionalization properties of the encapsulated nanoparticles. Finally, the extraordinary properties of these encapsulated nanoparticles in terms of toxicity and specificity in a broad in vitro test is demonstrated.

Polymer-assisted self-assembly of superparamagnetic iron oxide nanoparticles into well-defined clusters: controlling the collective magnetic properties.

The combination of superstructure-forming amphiphilic block copolymers and superparamagnetic iron oxide nanoparticles produces new nano/microcomposites with unique size-dependent properties. Herein, we demonstrate the controlled clustering of superparamagnetic iron oxide nanoparticles (SPIOs) ranging from discretely encapsulated SPIOs to giant clusters, containing hundreds or even more particles, using an amphiphilic polyisoprene-block-poly(ethylene glycol) diblock copolymer. Within these clusters, the SPIOs interact with each other and show new collective properties, neither obtainable with singly encapsulated nor with the bulk material. We observed cluster-size-dependent magnetic properties, influencing the blocking temperature, the magnetoviscosity of the liquid suspension, and the r2 relaxivity for magnetic iron oxide nanoparticles. The clustering methodology can be expanded also to other nanoparticle materials [CdSe/CdS/ZnS core/shell/shell quantum dots (QDs), CdSe/CdS quantum dots/quantum rods (QDQRs), gold nanoparticles, and mixtures thereof].

A general route towards well-defined magneto- or fluorescent-plasmonic nanohybrids.

Herein, we present a general route towards defined nanohybrids, comprised of a fluorescent quantum dot (QD) or superparamagnetic iron oxide (Fe2O3) nanocrystal core and a tuneable corona of plasmonic gold or silver nanoparticles (NPs), adhered by a cross-linked poly(isoprene)-b-poly(ethylene glycol) diblock copolymer (PI-b-PEG) matrix. To this end, the PEG-terminus of the amphiphilic polymer was acylated with lipoic acid (LA), which, as is known, forms quasi-covalent Au-thiol- or Ag-thiol-bonds. Surprisingly, by variation of the ratio of the different NPs, inverse core/satellite structures bearing QDs or Fe2O3 around a metallic NP core were obtained. Furthermore, gold NPs or even closed gold shells were grown by in situ reductive deposition of Au(3+) ions on Fe2O3 NP seeds. Finally, in order to demonstrate the scope of the method, ternary nanohybrids, composed of QDs, Fe2O3 and Au NPs, were accomplished. All magneto-plasmonic and fluorescent-plasmonic materials were thoroughly characterized by absorption and emission spectroscopy, TEM and TEM-EDX. Antibody conjugation to these novel nanohybrids proved their practical utility in a prototype immunoassay.

Controlling the physical and biological properties of highly fluorescent aqueous quantum dots using block copolymers of different size and shape.

The phase transfer of fluorescent CdSe based quantum dots (QDs) while retaining their properties and offering some advantages concerning the stability and functionalization characteristics is an important and intensively investigated field of research. Here we report how to tune and control the properties of CdSe/CdS/ZnS core-shell-shell QDs in water, using poly(isoprene-block-ethylene oxide) (PI-b-PEO) as a versatile system of amphiphilic diblock copolymers for the micellular encapsulation of nanoparticles (NPs). We show the synthesis of a novel PI-b-(PEO)2 miktoarm star polymer and how this different architecture besides the variation of the polymers' molecular weight gives us the opportunity to control the size of the built constructs in water between 24 and 53 nm. Because of this size control, an upper limit of the construct's diameter for the cellular uptake could be determined by a systemic study with human alveolar epithelial cells (A549) and murine macrophage leukemia cell (RAW-264.7). Furthermore, fluorescence quenching experiments with copper(II) and iron(III) ions show a strong influence of the used polymer on the shielding against these ions. This enables us to control the permeability of the polymer shell from very porous shells, which allow an almost complete cation exchange up to very dense shells. These even offer the possibility to perform copper(I) catalyzed click reactions while keeping the fluorescence of the QDs. All these results underline the huge variability and controllability of the PI-b-PEO diblock copolymer system for the encapsulation and functionalization of nanoparticles for biological applications. As a general trend, it can be stated that those coatings, which were most stable against quenchers, also showed the best resistivity with respect to unspecific cellular uptake.

Glycoconjugated amphiphilic polymers via click-chemistry for the encapsulation of quantum dots.

Herein, we present a strategy for the glycoconjugation of nanoparticles (NPs), with a special focus on fluorescent quantum dots (QDs), recently described by us as "preassembly" approach. Therein, prior to the encapsulation of diverse nanoparticles by an amphiphilic poly(isoprene)-b-poly(ethylene glycol) diblock copolymer (PI-b-PEG), the terminal PEG appendage was modified by covalently attaching a carbohydrate moiety using Huisgen-type click-chemistry. Successful functionalization was proven by NMR spectroscopy. The terminally glycoconjugated polymers were subsequently used for the encapsulation of QDs in a phase transfer process, which fully preserved fluorescence properties. Binding of these nanoconstructs to the lectin Concanavalin A (Con A) was studied via surface plasmon resonance (SPR). Depending on the carbohydrate moiety, namely, D-manno-heptulose, D-glucose, D-galactose, 2-deoxy-2-{[methylamino)carbonyl]amino}-D-glucopyranose ("des(nitroso)-streptozotocin"), or D-maltose, the glycoconjugated QDs showed enhanced affinity constants due to multivalent binding effects. None of the constructs showed toxicity from 0.001 to 1 µM (particle concentration) using standard WST and LDH assays on A549 cells.

Amphiphilic, cross-linkable diblock copolymers for multifunctionalized nanoparticles as biological probes.

Nanoparticles (NPs) play an increasingly important role in biological labeling and imaging applications. However, preserving their useful properties in an aqueous biological environment remains challenging, even more as NPs therein have to be long-time stable, biocompatible and nontoxic. For in vivo applications, size control is crucial in order to route excretion pathways, e.g. renal clearance vs. hepato-biliary accumulation. Equally necessary, cellular and tissue specific targeting demands suitable linker chemistry for surface functionalization with affinity molecules, like peptides, proteins, carbohydrates and nucleotides. Herein, we report a three stage encapsulation process for NPs comprised of (1) a partial ligand exchange by a multidentate polyolefinic amine ligand, PI-N3, (2) micellar encapsulation with a precisely tuned amphiphilic diblock PI-b-PEG copolymer, in which the PI chains intercalate to the PI-N3 prepolymer and (3) radical cross-linking of the adjacent alkenyl bonds. As a result, water-soluble NPs were obtained, which virtually maintained their primal physical properties and were exceptionally stable in biological media. PEG-terminal functionalization of the diblock PI-b-PEG copolymer with numerous functional groups was mostly straightforward by chain termination of the living anionic polymerization (LAP) with the respective reagents. More complex affinity ligands, e.g. carbohydrates or biotin, were introduced in a two-step process, prior to micellar encapsulation. Advantageously, this pre-assembly approach opens up rapid access to precisely tuned multifunctional NPs, just by using mixtures of diverse functional PI-b-PEG polymers in a combinatorial manner. All constructs showed no toxicity from 0.001 to 1 µM (particle concentration) in standard WST and LDH assays on A549 cells, as well as only marginal unspecific cellular uptake, even in serum-free medium.

In situ functionalization and PEO coating of iron oxide nanocrystals using seeded emulsion polymerization.

Herein we demonstrate that seeded emulsion polymerization is a powerful tool to produce multiply functionalized PEO coated iron oxide nanocrystals. Advantageously, by simple addition of functional surfactants, functional monomers, or functional polymerizable linkers-solely or in combinations thereof-during the seeded emulsion polymerization process, a broad range of in situ functionalized polymer-coated iron oxide nanocrystals were obtained. This was demonstrated by purposeful modulation of the zeta potential of encapsulated iron oxide nanocrystals and conjugation of a dyestuff. Successful functionalization was unequivocally proven by TXRF. Furthermore, the spatial position of the functional groups can be controlled by choosing the appropriate spacers. In conclusion, this methodology is highly amenable for combinatorial strategies and will spur rapid expedited synthesis and purposeful optimization of a broad scope of nanocrystals.

Tailor-made quantum dot and iron oxide based contrast agents for in vitro and in vivo tumor imaging.

The biofunctionalization of CdSe/CdS/ZnS quantum dots and Fe(3)O(4) nanocrystals using a novel ligand system based on polyisoprene-block-poly(ethylene oxide) ligands is described. The synthesis includes a partial ligand exchange of the hydrophobic nanocrystals with amino-functionalized polyisoprene ligands, followed by seeded micelle formation of the diblock-copolymers in water. The resulting water-soluble quantum dots showed fluorescence quantum efficiencies in the 40 to 50% range and extraordinary fluorescence stability in the biological environment after cross-linking of the polyisoprene moiety of the ligand shell. No toxicity was detected by water-soluble tetrazolium (WST8) and lactate dehydrogenase (LDH) assays, even at very high nanoparticle concentrations, and almost no nonspecific cell adhesion was detected. The ligand shell was further coupled to the antigen-related cell adhesion molecule (CEACAM) specific monoclonal antibody T84.1. The so-conjugated Fe(3)O(4) nanocrystals allowed in vitro and in vivo tumor targeting by magnetic resonance imaging.

Ultrasmall biocompatible nanocomposites: a new approach using seeded emulsion polymerization for the encapsulation of nanocrystals.

We report a novel approach of seeded emulsion polymerization in which nanocrystals are used as seeds. Ultrasmall biocompatible polymer-coated nanocrystal with sizes between 15 and 110 nm could be prepared in a process that avoids any treatment with high shear forces or ultrasonication. The number of nanocrystals per seed, the size of the seeds, and the shell thickness can be independently adjusted. Single encapsulated nanocrystals in ultrasmall nanobeads as well as clusters of nanocrystals can be obtained. Polysorbat-80 was used as surfactant. It consists of poly(ethylene glycol) (PEG) chains, giving the particles outstanding biofunctional characteristics such as a minimization of unspecific interactions.

Relaxivity optimization of a PEGylated iron-oxide-based negative magnetic resonance contrast agent for T2-weighted spin-echo imaging.

Concerning the outer sphere relaxation theory, the sensitivity of a T(2) MRI contrast agent, expressed by the transverse relaxivity r(2), depends on the diffusion length of water molecules relative to the particle size. For T(2)-weighted spin-echo imaging, theoretical concepts reveal three regimes regarding the r(2) relaxivity depending on the nanocrystal size: the motional averaging regime (MAR), the static dephasing regime (SDR), and the echo-limiting regime (ELR). The r(2) maximum corresponds to the SDR, which represents a small size regime. To verify the theoretical concepts and to adjust the SDR, tailor-made T(2) contrast agents were synthesized by controlled self-assembly of superparamagnetic iron oxide nanocrystals (SPIOs) into raspberry-like nanoclusters with diameters of 30-200 nm using a PEG-based ligand. The results highlight an opportunity to optimize the relaxivity of T(2) contrast agents by tuning the cluster size of SPIO nanocrystals.