XFEL Microcrystallography of Self-Assembling Silver n-Alkanethiolates.

New synthetic hybrid materials and their increasing complexity have placed growing demands on crystal growth for single-crystal X-ray diffraction analysis. Unfortunately, not all chemical systems are conducive to the isolation of single crystals for traditional characterization. Here, small-molecule serial femtosecond crystallography (smSFX) at atomic resolution (0.833 Å) is employed to characterize microcrystalline silver n-alkanethiolates with various alkyl chain lengths at X-ray free electron laser facilities, resolving long-standing controversies regarding the atomic connectivity and odd-even effects of layer stacking. smSFX provides high-quality crystal structures directly from the powder of the true unknowns, a capability that is particularly useful for systems having notoriously small or defective crystals. We present crystal structures of silver n-butanethiolate (C4), silver n-hexanethiolate (C6), and silver n-nonanethiolate (C9). We show that an odd-even effect originates from the orientation of the terminal methyl group and its role in packing efficiency. We also propose a secondary odd-even effect involving multiple mosaic blocks in the crystals containing even-numbered chains, identified by selected-area electron diffraction measurements. We conclude with a discussion of the merits of the synthetic preparation for the preparation of microdiffraction specimens and compare the long-range order in these crystals to that of self-assembled monolayers.

Photon-shot-noise-limited transient absorption soft X-ray spectroscopy at the European XFEL.

Femtosecond transient soft X-ray absorption spectroscopy (XAS) is a very promising technique that can be employed at X-ray free-electron lasers (FELs) to investigate out-of-equilibrium dynamics for material and energy research. Here, a dedicated setup for soft X-rays available at the Spectroscopy and Coherent Scattering (SCS) instrument at the European X-ray Free-Electron Laser (European XFEL) is presented. It consists of a beam-splitting off-axis zone plate (BOZ) used in transmission to create three copies of the incoming beam, which are used to measure the transmitted intensity through the excited and unexcited sample, as well as to monitor the incoming intensity. Since these three intensity signals are detected shot by shot and simultaneously, this setup allows normalized shot-by-shot analysis of the transmission. For photon detection, an imaging detector capable of recording up to 800 images at 4.5 MHz frame rate during the FEL burst is employed, and allows a photon-shot-noise-limited sensitivity to be approached. The setup and its capabilities are reviewed as well as the online and offline analysis tools provided to users.

Evaluation of serial crystallographic structure determination within megahertz pulse trains.

The new European X-ray Free-Electron Laser (European XFEL) is the first X-ray free-electron laser capable of delivering intense X-ray pulses with a megahertz interpulse spacing in a wavelength range suitable for atomic resolution structure determination. An outstanding but crucial question is whether the use of a pulse repetition rate nearly four orders of magnitude higher than previously possible results in unwanted structural changes due to either radiation damage or systematic effects on data quality. Here, separate structures from the first and subsequent pulses in the European XFEL pulse train were determined, showing that there is essentially no difference between structures determined from different pulses under currently available operating conditions at the European XFEL.

The Karabo distributed control system.

The Karabo distributed control system has been developed to address the challenging requirements of the European X-ray Free Electron Laser facility, including complex and custom-made hardware, high data rates and volumes, and close integration of data analysis for distributed processing and rapid feedback. Karabo is a pluggable, distributed application management system forming a supervisory control and data acquisition environment as part of a distributed control system. Karabo provides integrated control of hardware, monitoring, data acquisition and data analysis on distributed hardware, allowing rapid control feedback based on complex algorithms. Services exist for access control, data logging, configuration management and situational awareness through alarm indicators. The flexible framework enables quick response to the changing requirements in control and analysis, and provides an efficient environment for development, and a single interface to make all changes immediately available to operators and experimentalists.

Stable and manipulable Bloch point.

The prediction of magnetic skyrmions being used to change the way we store and process data has led to materials with Dzyaloshinskii-Moriya interaction coming into the focus of intensive research. So far, studies have looked mostly at magnetic systems composed of materials with single chirality. In a search for potential future spintronic devices, combination of materials with different chirality into a single system may represent an important new avenue for research. Using finite element micromagnetic simulations, we study an FeGe disk with two layers of different chirality. We show that for particular thicknesses of layers, a stable Bloch point emerges at the interface between two layers. In addition, we demonstrate that the system undergoes hysteretic behaviour and that two different types of Bloch point exist. These 'head-to-head' and 'tail-to-tail' Bloch point configurations can, with the application of an external magnetic field, be switched between. Finally, by investigating the time evolution of the magnetisation field, we reveal the creation mechanism of the Bloch point. Our results introduce a stable and manipulable Bloch point to the collection of particle-like state candidates for the development of future spintronic devices.

MHz data collection of a microcrystalline mixture of different jack bean proteins.

We provide a detailed description of a serial femtosecond crystallography (SFX) dataset collected at the European X-ray free-electron laser facility (EuXFEL). The EuXFEL is the first high repetition rate XFEL delivering MHz X-ray pulse trains at 10 Hz. The short spacing (<1 µs) between pulses requires fast flowing microjets for sample injection and high frame rate detectors. A data set was recorded of a microcrystalline mixture of at least three different jack bean proteins (urease, concanavalin A, concanavalin B). A one megapixel Adaptive Gain Integrating Pixel Detector (AGIPD) was used which has not only a high frame rate but also a large dynamic range. This dataset is publicly available through the Coherent X-ray Imaging Data Bank (CXIDB) as a resource for algorithm development and for data analysis training for prospective XFEL users.

Megahertz data collection from protein microcrystals at an X-ray free-electron laser.

X-ray free-electron lasers (XFELs) enable novel experiments because of their high peak brilliance and femtosecond pulse duration. However, non-superconducting XFELs offer repetition rates of only 10-120 Hz, placing significant demands on beam time and sample consumption. We describe serial femtosecond crystallography experiments performed at the European XFEL, the first MHz repetition rate XFEL, delivering 1.128 MHz X-ray pulse trains at 10 Hz. Given the short spacing between pulses, damage caused by shock waves launched by one XFEL pulse on sample probed by subsequent pulses is a concern. To investigate this issue, we collected data from lysozyme microcrystals, exposed to a ~15 µm XFEL beam. Under these conditions, data quality is independent of whether the first or subsequent pulses of the train were used for data collection. We also analyzed a mixture of microcrystals of jack bean proteins, from which the structure of native, magnesium-containing concanavalin A was determined.

Thermal stability and topological protection of skyrmions in nanotracks.

Magnetic skyrmions are hailed as a potential technology for data storage and other data processing devices. However, their stability against thermal fluctuations is an open question that must be answered before skyrmion-based devices can be designed. In this work, we study paths in the energy landscape via which the transition between the skyrmion and the uniform state can occur in interfacial Dzyaloshinskii-Moriya finite-sized systems. We find three mechanisms the system can take in the process of skyrmion nucleation or destruction and identify that the transition facilitated by the boundary has a significantly lower energy barrier than the other energy paths. This clearly demonstrates the lack of the skyrmion topological protection in finite-sized magnetic systems. Overall, the energy barriers of the system under investigation are too small for storage applications at room temperature, but research into device materials, geometry and design may be able to address this.

Unconscious selection drove seed enlargement in vegetable crops.

Domesticated grain crops evolved from wild plants under human cultivation, losing natural dispersal mechanisms to become dependent upon humans, and showing changes in a suite of other traits, including increasing seed size. There is tendency for seed enlargement during domestication to be viewed as the result of deliberate selection for large seeds by early farmers. However, like some other domestication traits, large seeds may have evolved through natural selection from the activities of people as they gathered plants from the wild, or brought them into cultivation in anthropogenic settings. Alternatively, larger seeds could have arisen via pleiotropic effects or genetic linkage, without foresight from early farmers, and driven by selection that acted on other organs or favored larger plants. We have separated these unconscious selection effects on seed enlargement from those of deliberate selection, by comparing the wild and domesticated forms of vegetable crops. Vegetables are propagated by planting seeds, cuttings, or tubers, but harvested for their edible leaves, stems, or roots, so that seed size is not a direct determinant of yield. We find that landrace varieties of seven vegetable crops have seeds that are 20% to 2.5-times larger than those of their closest wild relatives. These domestication effect sizes fall completely within the equivalent range of 14% to 15.2-times for grain crops, although domestication had a significantly larger overall effect in grain than vegetable crops. Seed enlargement in vegetable crops that are propagated vegetatively must arise from natural selection for larger seeds on the occasions when plants recruit from seed and are integrated into the crop gene pool, or via a genetic link to selection for larger plants or organs. If similar mechanisms operate across all species, then unconscious selection during domestication could have exerted stronger effects on the seed size of our staple crops than previously realized.

Did greater burial depth increase the seed size of domesticated legumes?

The independent domestication of crop plants in several regions of the world formed the basis of human civilizations, and attracts considerable interest from archaeologists and biologists. Selection under cultivation led to a suite of domestication traits which distinguish crops from their wild progenitors, including larger seeds in most seed crops. This selection may be classified as 'conscious' or 'unconscious' selection according to whether humans were aware of the changes that they were driving. The hypothesis that human cultivation buried seeds deeper than natural dispersal, exerting unconscious selection favouring larger seeds with greater reserves, was tested. Using a comparative approach, accessions of eight grain legumes, originating from independent domestication centres across several continents, were sampled. Seeds were planted at different depths in a controlled environment, and seedling emergence scored for 5 weeks after sowing. Domestication in all species was associated with increased seed mass. In three species, greater mass was not correlated with increased ability to emerge from depth. In five species, emergence depth did correlate with mass, suggesting that selection during domestication may have acted on emergence depth. However, domestication only had a significant effect in two of these species (lentil and mung bean), and the increase in depth was no more than predicted by a cube-root allometric relationship with seed mass. The results do not support the hypothesis that burial under cultivation was a general selection mechanism for increased seed mass during the domestication of grain legumes, but it may have acted in particular species or regions.

Taxonome: a software package for linking biological species data.

Online databases of biological information offer tremendous potential for evolutionary and ecological discoveries, especially if data are combined in novel ways. However, the different names and varied spellings used for many species present major barriers to linking data. Taxonome is a software tool designed to solve this problem by quickly and reproducibly matching biological names to a given reference set. It is available both as a graphical user interface (GUI) for simple interactive use, and as a library for more advanced functionality with programs written in Python. Taxonome also includes functions to standardize distribution information to a well-defined set of regions, such as the TDWG World Geographical Scheme for Recording Plant Distributions. In combination, these tools will help biologists to rapidly synthesize disparate datasets, and to investigate large-scale patterns in species traits.