ABSTRACT
INTRODUCTION: The long-term impact of deployment-related trauma on mental and physical health-related quality of life (HRQoL) among military personnel is not well understood. We describe the mental and physical HRQoL among military personnel following deployment-related polytrauma after their discharge from the hospital and examine factors associated with HRQoL and longitudinal trends. MATERIALS AND METHODS: The U.S. military personnel with battlefield-related trauma enrolled in the Trauma Infectious Diseases Outcomes Study were surveyed using SF-8 Health Surveys at 1 month post-discharge (baseline) and at follow-up intervals over 2 years. Inclusion in the longitudinal analysis required baseline SF-8 plus responses during early (3 and/or 6 months) and later follow-up periods (12, 18, and/or 24 months). Associations of demographics, injury characteristics, and hospitalization with baseline SF-8 scores and longitudinal changes in SF-8 scores during follow-up were examined. Survey responses were used to calculate the Mental Component Summary score (MCS) and the Physical Component Summary score (PCS). The MCS focuses on vitality, mental health, social functioning, and daily activity limitations, whereas PCS is related to general health, bodily pain, physical functioning, and physical activity limitations. Longitudinal trends in SF-8 scores were assessed using chi-square tests by comparing the median score at each timepoint to the median 1-month (baseline) score, as well as comparing follow-up scores to the immediately prior timepoint (e.g., 6 months vs. 3 months). Associations with the 1-month baseline SF-8 scores were assessed using generalized linear regression modeling and associations with longitudinal changes in SF-8 were examined using generalized linear regression modeling with repeated measures. RESULTS: Among 781 enrollees, lower baseline SF-8 total scores and PCS were associated with spinal and lower extremity injuries (P < .001) in the multivariate analyses, whereas lower baseline MCS was associated with head/face/neck injuries (P < .001). Higher baseline SF-8 total was associated with having an amputation (P = .009), and lower baseline SF-8 total was also associated with sustaining a traumatic brain injury (TBI; P = .042). Among 524 enrollees with longitudinal follow-up, SF-8 scores increased, driven by increased PCS and offset by small MCS decreases. Upward SF-8 total score and PCS trends were associated with time post-hospital discharge and limb amputation (any) in the multivariate analyses (P < .05), whereas downward trends were independently associated with spinal injury and developing any post-discharge infection (P ≤ .001). Patients with lower extremity injuries had lower-magnitude improvements in PCS over time compared to those without lower extremity injuries (P < .001). Upward MCS trend was associated with higher injury severity (P = .003) in the multivariate analyses, whereas downward trends were independently associated with having a TBI (P < .001), time post-hospital discharge (P < .001), and occurrence of post-discharge infections (P = .002). CONCLUSIONS: Overall, HRQoL increased during the 2-year follow-up period, driven by PCS improvement. Increasing HRQoL was associated with time since hospital discharge and limb amputation, whereas a downward trend in HRQoL was associated with spinal injury and post-discharge infection. The longitudinal decline in MCS, driven by TBI occurrence, time since hospital discharge, and developing post-discharge infections, emphasizes the importance of longitudinal mental health care in this population.
ABSTRACT
BACKGROUND: The purpose of this study is to investigate the biomechanical effect of medial displacement calcaneal osteotomy (MDCO), subtalar joint fusion (SF), and medial ligament reconstruction (MLR: deltoid-spring ligament) in a severe flatfoot model. We hypothesized that (1) combination of MDCO and SF improves the tibiotalar and foot alignment in severe progressive collapsing foot deformity (PCFD) cadaver model. (2) However, if a residual valgus heel alignment remains after MCDO and SF, it can lead to increased medial ligament strain, foot malalignment, and tibiotalar valgus tilt, which will be mitigated by the addition of MLR. METHODS: Ten fresh-frozen cadaveric foot specimens were used to create a severe flatfoot model. The foot alignment changes, including the talo-first metatarsal angle in the axial and sagittal planes, subtalar angle, and tibiotalar angle in the coronal plane, were measured. The angles were measured at the initial condition, after creating the severe flatfoot model, and after each successive reconstructive procedure in the following order: (1) MDCO, (2) SF, and (3) MLR. RESULTS: Tibiotalar valgus tilt was decreased with the MDCO procedure: 4.4 vs 1.0 degrees (P = .04). Adding in situ SF to the MDCO led to increased tibiotalar tilt to 2.5 degrees was different from the initial condition (P = .01). Although the tibiotalar valgus tilt was significantly decreased after adding the MLR to the MDCO/SF procedure compared with the severe flatfoot model (0.8 vs 4.4 degrees, P = .03), no significant difference in the tibiotalar valgus tilt was observed between MDCO/SF and MDCO/SF with MLR. CONCLUSION: Our results demonstrated that MDCO significantly improved forefoot abduction and medial arch alignment, with no significant additional improvement observed with addition of SF. Following SF, a residual valgus heel alignment can contribute to subsequent tibiotalar valgus tilt. The addition of MLR did not show significantly decreased tibiotalar valgus tilt following SF. CLINICAL RELEVANCE: Residual valgus heel alignment after subtalar joint fusion in the surgical treatment of PCFD can lead to increased medial ligament strain. Although MLR might be considered for providing medial stability, it may not necessarily prevent the development of tibiotalar valgus tilt.
Subject(s)
Flatfoot , Foot Deformities , Subtalar Joint , Humans , Flatfoot/surgery , Subtalar Joint/surgery , Foot , Ligaments, Articular/surgeryABSTRACT
While osteoporosis is reliably diagnosed using dual energy X-ray absorptiometry (DXA), screening rates are alarmingly low, contributing to preventable fractures. Raman spectroscopy (RS) can detect biochemical changes that occur in bones transcutaneously and can arguably be more accessible than DXA as a fracture risk assessment. A reasonable approach to translate RS is to interrogate phalangeal bones of human hands, where the soft tissues covering the bone are less likely to hamper transcutaneous measurements. To that end, we set out to first determine whether Raman spectra obtained from phalangeal bones correlate with distal radius fracture strength, which can predict subsequent osteoporotic fractures at the spine and hip. We performed RS upon diaphyseal and epiphyseal regions of exposed proximal phalanges from 12 cadaver forearms classified as healthy (n = 3), osteopenic (n = 4), or osteoporotic (n = 5) based on wrist T-scores measured by DXA. We observed a significant decrease in phosphate to matrix ratio and a significant increase in carbonate substitution in the osteoporotic phalanges relative to healthy and osteopenic phalanges. Multivariate regression models produced wrist T-score estimates with significant correlation to the DXA-measured values (r = 0.79). Furthermore, by accounting for phalangeal RS parameters, body mass index, and age, a multivariate regression significantly predicted distal radius strength measured in a simulated-fall biomechanical test (r = 0.81). These findings demonstrate the feasibility of interrogating the phalanges using RS for bone quality assessment of distant clinical sites of fragility fractures, such as the wrist. Future work will address transcutaneous measurement challenges as another requirement for scale-up and translation.
Subject(s)
Finger Phalanges , Osteoporotic Fractures , Humans , Radius , Absorptiometry, Photon/methods , Forearm , Cadaver , Bone DensityABSTRACT
INTRODUCTION: Revision total hip arthroplasty in the setting of acetabular bone loss remains a challenging clinical entity. Deficiencies of the acetabular rim, walls, and/or columns may limit the bony surface area and initial acetabular construct stability necessary for osseointegration of cementless components. Press-fit acetabular components with supplemental acetabular screw fixation represent a common technique aimed to minimize implant micromotion and allow for definitive osseointegration. Although acetabular screw fixation is commonly practiced in revision hip arthroplasty, few studies to date have examined the screw properties associated with maximal acetabular construct stability. The purpose of the present report is to examine acetabular screw fixation in a pelvis model mimicking Paprosky IIB acetabular bone loss. METHODS: Measuring bone-implant interface micromotion as a surrogate for initial implant stability, experimental models assessed the effect of screw number, screw length, and screw position on construct stability subject to a cyclic loading protocol designed to replicate joint reaction forces of two common daily activities. RESULTS: Trends towards increasing stability were demonstrated with increasing screw number, increasing screw length, and concentrating screws in the supra-acetabular dome. All experimental constructs yielded micromotion levels sufficient for bone ingrowth, except when screws in the dome were moved to the pubis and ischium. CONCLUSIONS: When using a porous coated revision acetabular implant to treat Paprosky IIB defects, screws should be used, and furthermore, increasing number, length, and position within the acetabular dome may help further stabilize the construct.
ABSTRACT
Fractures in the femoral neck are a common occurrence in individuals with osteoporosis. Many mouse models have been developed to assess disease states and therapies, with biomechanical testing as a primary outcome measure. However, traditional biomechanical testing focuses on torsion or bending tests applied to the midshaft of the long bones. This is not typically the site of high-risk fractures in osteoporotic individuals. Therefore, a biomechanical testing protocol was developed that tests the femoral necks of murine femurs in cantilever bending loading to replicate better the types of fractures experienced by osteoporosis patients. Since the biomechanical outcomes are highly dependent on the flexural loading direction relative to the femoral neck, 3D printed guides were created to maintain a femoral shaft at an angle of 20° relative to the loading direction. The new protocol streamlined the testing by reducing variability in alignment (21.6° ± 1.5°, COV = 7.1%, n = 20) and improved reproducibility in the measured biomechanical outcomes (average COV = 26.7%). The new approach using the 3D printed guides for reliable specimen alignment improves rigor and reproducibility by reducing the measurement errors due to specimen misalignment, which should minimize sample sizes in mouse studies of osteoporosis.
Subject(s)
Femur Neck , Osteoporosis , Animals , Biomechanical Phenomena , Femur , Humans , Mice , Reproducibility of ResultsABSTRACT
BACKGROUND: Bony Bankart lesions can be encountered during treatment of shoulder instability. Current arthroscopic bony Bankart repair techniques involve intra-articular suture placement, but the effect of these repair techniques on the integrity of the humeral head articular surface warrants further investigation. PURPOSE: To quantify the degree of humeral head articular cartilage damage secondary to current arthroscopic bony Bankart repair techniques in a cadaveric model. STUDY DESIGN: Controlled laboratory study. METHODS: Testing was performed in 13 matched pairs of cadaveric glenoids with simulated bony Bankart fractures, with a defect width of 25% of the glenoid diameter. Half of the fractures were repaired with a double-row technique, while the contralateral glenoids were repaired with a single-row technique. Samples were subjected to 20,000 cycles of internal-external rotation across a 90° arc at 2 Hz after a compressive load of 750 N, or 90% body weight (whichever was less) was applied to simulate wear. Cartilage defects on the humeral head were quantified through a custom MATLAB script. Mean cartilage cutout differences were analyzed by the Wilcoxon rank-sum test. RESULTS: Both single- and double-row repairs showed macroscopic damage. The histomorphometric analysis demonstrated that the double-row technique resulted in a significantly (P = .036) more chondral damage (mean, 57,489.1 µm2; SD, 61,262.2 µm2) than the single-row repair (mean, 28,763.5 µm2; SD, 24,4990.2 µm2). CONCLUSION: Both single-row and double-row arthroscopic bony Bankart fixation techniques resulted in damage to the humeral head articular cartilage in the concavity-compression model utilized in this study. The double-row fixation technique resulted in a significantly increased cutout to the humeral head cartilage after simulated wear in this cadaveric model. CLINICAL RELEVANCE: This study provides data demonstrating that placement of intra-articular suture during arthroscopic bony Bankart repair techniques may harm the humeral head cartilage. While the double-row repair of bony Bankart lesions is more stable, it results in increased cartilage damage. These findings suggest that alternative, cartilage-sparing arthroscopic techniques for bony Bankart repair should be investigated.
Subject(s)
Bankart Lesions , Joint Instability , Shoulder Dislocation , Shoulder Joint , Arthroscopy , Biomechanical Phenomena , Humans , Humeral Head/surgery , Joint Instability/surgery , Shoulder Dislocation/surgery , Shoulder Joint/surgeryABSTRACT
BACKGROUND: Previous studies comparing stability between single- and double-row arthroscopic bony Bankart repair techniques focused only on the measurements of tensile forces on the bony fragment without re-creating a more physiologic testing environment. PURPOSE: To compare dynamic stability and displacement between single- and double-row arthroscopic repair techniques for acute bony Bankart lesions in a concavity-compression cadaveric model simulating physiologic conditions. STUDY DESIGN: Controlled laboratory study. METHODS: Testing was performed on 13 matched pairs of cadaveric glenoids with simulated bony Bankart fractures with a defect width of 25% of the inferior glenoid diameter. Half of the fractures were repaired with a double-row technique, and the contralateral glenoids were repaired with a single-row technique. To determine dynamic biomechanical stability and ultimate step-off of the repairs, a 150-N load and 2000 cycles of internal-external rotation at 1 Hz were applied to specimens to simulate early rehabilitation. Toggle was quantified throughout cycling with a coordinate measuring machine. Three-dimensional spatial measurements were calculated. After cyclic loading, the fracture displacement was measured. RESULTS: The bony Bankart fragment-glenoid initial step-off was found to be significantly greater (P < .001) for the single-row technique (mean, 896 µm; SD, 282 µm) compared with the double-row technique (mean, 436 µm; SD, 313 µm). The motion toggle was found to be significantly greater (P = .017) for the single-row technique (mean, 994 µm; SD, 711 µm) compared with the double-row technique (mean, 408 µm; SD, 384 µm). The ultimate interface displacement was found to be significantly greater (P = .029) for the single-row technique (mean, 1265 µm; SD, 606 µm) compared with the double-row technique (mean, 795 µm; SD, 398 µm). CONCLUSION: Using a concavity-compression glenohumeral cadaveric model, we found that the double-row arthroscopic fixation technique for bony Bankart repair resulted in superior stability and decreased displacement during simulated rehabilitation when compared with the single-row repair technique. CLINICAL RELEVANCE: The findings from this study may help guide surgical decision-making by demonstrating superior biomechanical properties (improved initial step-off, motion toggle, and interface displacement) of the double-row bony Bankart repair technique when compared with single-row fixation. The double-row repair construct demonstrated increased stability of the bony Bankart fragment, which may improve bony Bankart healing.
Subject(s)
Bankart Lesions , Arthroscopy , Biomechanical Phenomena , Cadaver , Humans , Scapula/surgery , Suture TechniquesABSTRACT
Despite the requirement for Scleraxis-lineage (ScxLin) cells during tendon development, the function of ScxLin cells during adult tendon repair, post-natal growth, and adult homeostasis have not been defined. Therefore, we inducibly depleted ScxLin cells (ScxLinDTR) prior to tendon injury and repair surgery and hypothesized that ScxLinDTR mice would exhibit functionally deficient healing compared to wild-type littermates. Surprisingly, depletion of ScxLin cells resulted in increased biomechanical properties without impairments in gliding function at 28 days post-repair, indicative of regeneration. RNA sequencing of day 28 post-repair tendons highlighted differences in matrix-related genes, cell motility, cytoskeletal organization, and metabolism. We also utilized ScxLinDTR mice to define the effects on post-natal tendon growth and adult tendon homeostasis and discovered that adult ScxLin cell depletion resulted in altered tendon collagen fibril diameter, density, and dispersion. Collectively, these findings enhance our fundamental understanding of tendon cell localization, function, and fate during healing, growth, and homeostasis.
Subject(s)
Basic Helix-Loop-Helix Transcription Factors/genetics , Homeostasis , Tendon Injuries/metabolism , Tendons/metabolism , Wound Healing , Animals , Basic Helix-Loop-Helix Transcription Factors/deficiency , Female , Male , MiceABSTRACT
Bone fragility and fracture risk are assessed by measuring the areal bone mineral density (aBMD) using dual-energy X-ray absorptiometry (DXA). While aBMD correlates with bone strength, it is a poor predictor of fragility fracture risk. Alternatively, fracture toughness assesses the bone's resistance to crack propagation and fracture, making it a suitable bone quality metric. Here, we explored how femoral midshaft measurements from DXA, micro-computed tomography (µCT), and Raman spectroscopy could predict fracture toughness. We hypothesized that ovariectomy (OVX) decreases aBMD and fracture toughness compared to controls and we can optimize a multivariate assessment of bone quality by combining results from X-ray and Raman spectroscopy. Female mice underwent an OVX (n = 5) or sham (n = 5) surgery at 3 months of age. Femurs were excised 3 months after ovariectomy and assessed with Raman spectroscopy, µCT, and DXA. Subsequently, a notch was created on the anterior side of the mid-diaphysis of the femurs. Three-point bending induced a controlled fracture that initiated at the notch. The OVX mice had a significantly lower aBMD, cortical thickness, and fracture toughness when compared to controls (p < 0.05). A leave one out cross-validated (LOOCV) partial least squares regression (PLSR) model based only on the combination of aBMD and cortical thickness showed no significant predictive correlations with fracture toughness, whereas a PLSR model based on principal components derived from the full Raman spectra yielded significant prediction (r2 = 0.71, p < 0.05). Further, the PLSR model was improved by incorporating aBMD, cortical thickness, and principal components from Raman spectra (r2 = 0.92, p < 0.001). This exploratory study demonstrates combining X-ray with Raman spectroscopy leads to a more accurate assessment of bone fracture toughness and could be a useful diagnostic tool for the assessment of fragility fracture risk.
Subject(s)
Femoral Fractures , Spectrum Analysis, Raman , Absorptiometry, Photon , Animals , Bone Density , Female , Femoral Fractures/diagnostic imaging , Humans , Mice , X-Ray MicrotomographyABSTRACT
The use of tamoxifen-inducible models of Cre recombinase in the tendon field is rapidly expanding, resulting in an enhanced understanding of tendon homeostasis and healing. However, the effects of tamoxifen on the tendon are not well-defined, which is particularly problematic given that tamoxifen can have both profibrotic and antifibrotic effects in a tissue-specific manner. Therefore, in the present study, we examined the effects of tamoxifen on tendon homeostasis and healing in male and female C57Bl/6J mice. Tamoxifen-treated mice were compared to corn oil (vehicle)-treated mice. In the "washout" treatment regimen, mice were treated with tamoxifen or corn oil for 3 days beginning 1 week prior to undergoing complete transection and surgical repair of the flexor digitorum longus tendon. In the second regimen, mice were treated with tamoxifen or corn oil beginning on the day of surgery, daily through day 2 postsurgery, and every 48 hours thereafter (D0-2q48) until harvest. All repaired tendons and uninjured contralateral control tendons were harvested at day 14 postsurgery. Tamoxifen treatment had no effect on tendon healing in male mice, regardless of the treatment regimen, while Max load was significantly decreased in female repairs in the Tamoxifen washout group, relative to corn oil. In contrast, D0-2q48 corn oil treatment in female mice led to substantial disruptions in tendon homeostasis, relative to washout corn oil treatment. Collectively, these data clearly define the functional effects of tamoxifen and corn oil treatment in the tendon and inform future use of tamoxifen-inducible genetic models.
Subject(s)
Selective Estrogen Receptor Modulators/adverse effects , Tamoxifen/adverse effects , Tendon Injuries , Tendons/drug effects , Wound Healing/drug effects , Animals , Disease Models, Animal , Drug Evaluation, Preclinical , Female , Homeostasis/drug effects , Male , Mice, Inbred C57BL , Mice, TransgenicABSTRACT
The shortcomings of autografts and allografts in bone defect healing have prompted researchers to develop suitable alternatives. Numerous biomaterials have been developed as bone graft substitutes each with their own advantages and disadvantages. However, in order to test if these biomaterials provide an adequate replacement of the clinical standard, a clinically representative animal model is needed to test their efficacy. In this chapter, we describe a mouse model that establishes a critical sized defect in the mid-diaphysis of the femur to evaluate the performance of bone graft substitutes. This is achieved by performing a femoral ostectomy and stabilization utilizing a femoral plate and titanium screws. The resulting defect enables the bone regenerative potential of bone graft substitutes to be investigated. Lastly, we provide instruction on assessing the torsional strength of the healed femurs to quantitatively evaluate the degree of healing as a primary outcome measure.
Subject(s)
Biocompatible Materials/pharmacology , Bone Regeneration/drug effects , Bone Transplantation/methods , Diaphyses/drug effects , Femur/surgery , Animals , Autografts/transplantation , Bone Screws , Bone Substitutes/pharmacology , Diaphyses/growth & development , Disease Models, Animal , Femur/growth & development , Femur/physiopathology , Fracture Healing/drug effects , Humans , MiceABSTRACT
Although inflammation is necessary during the early phases of tissue repair, persistent inflammation contributes to fibrosis. Acute tendon injuries often heal through a fibrotic mechanism, which impedes regeneration and functional recovery. Because inflammation mediated by nuclear factor κB (NF-κB) signaling is implicated in this process, we examined the spatial, temporal, and cell type-specific activation profile of canonical NF-κB signaling during tendon healing. NF-κB signaling was maintained through all phases of tendon healing in mice, including the remodeling phase, and tenocytes and myofibroblasts from the Scleraxis (Scx) lineage were the predominant populations that retained NF-κB activation into the late stages of repair. We confirmed persistent NF-κB activation in myofibroblasts in human tendon scar tissue. Deleting the canonical NF-κB kinase, IKKß, in Scx-lineage cells in mice increased apoptosis and the deposition of the matrix protein periostin during the late stages of tendon repair, suggesting that persistent NF-κB signaling may facilitate myofibroblast survival and fibrotic progression. Consistent with this, myofibroblasts in human tendon scar samples displayed enhanced prosurvival signaling compared to control tissue. Together, these data suggest that NF-κB may contribute to fibrotic tendon healing through both inflammation-dependent and inflammation-independent functions, such as NF-κB-mediated cell survival.
Subject(s)
Myofibroblasts/metabolism , NF-kappa B/metabolism , Signal Transduction , Tendon Injuries/metabolism , Animals , Basic Helix-Loop-Helix Transcription Factors/genetics , Basic Helix-Loop-Helix Transcription Factors/metabolism , Mice , Mice, Knockout , Myofibroblasts/pathology , NF-kappa B/genetics , Tendon Injuries/genetics , Tendon Injuries/pathologyABSTRACT
BACKGROUND: Forearm fractures are one of the top three most common fractures in children. Treatment often includes immobilizing the arm in a cast extending above the elbow to help maintain fracture reduction and alignment. Complications from circumferential casting can occur including swelling in the forearm that can lead to neurovascular complications. About 16% of children require splitting of the cast to relieve the increased pressure. Our study investigates the impact the location of the split has on cast bending stiffness in an above elbow cast model. METHODS: A Sawbones© pediatric forearm model was used for application of a hybrid plaster-fiberglass cast to simulate treatment of a pediatric forearm fracture. The plaster was allowed to set for 20 minutes followed by application of a single fiberglass layer. The casts set for at least 24 hours and were then left intact or split along one of their 4 axes. Once categorized, the casts were subjected to biomechanical testing using an Instron ElectroPlus 10000 with a 3-point bending set up. The casts were tested until failure, and the load versus displacement curves were analyzed. Each category of casts was tested five times from both a volar and dorsal direction. RESULTS: When loaded dorsal to volar, intact casts were significantly stiffer than those split along the dorsal, radial, or volar surfaces (p=0.0062, 0.0267, 0.0024 respectively). There was no significant difference when comparing one axis of longitudinal split to another. Intact casts showed a significantly higher load to failure than those split along the radial border (p=0.0168). When loaded volar to dorsal, intact casts were significantly stiffer than those split along any axis. Intact casts showed a significantly higher maximum load to failure than those split along the radial or ulnar border (p=0.0247, 0.0112 respectively). CONCLUSION: Consideration should be given to splitting above elbow casts along the volar or dorsal surface, as those split along the radial or ulnar border tend to have lower maximum load to failure. CLINICAL RELEVANCE: To analyze the effect of splitting an above elbow cast on bending stiffness.
Subject(s)
Elbow Joint , Forearm Injuries , Radius Fractures , Casts, Surgical , Child , Elbow , Humans , Radius Fractures/surgeryABSTRACT
BACKGROUND: Adult acquired flatfoot deformity (AAFD) is a complex and progressive deformity involving the ligamentous structures of the medial peritalar joints. Recent anatomic studies demonstrated that the spring and deltoid ligaments form a greater medial ligament complex, the tibiocalcaneonavicular ligament (TCNL), which provides medial stability to the talonavicular, subtalar, and tibiotalar joints. The aim of this study was to assess the biomechanical effect of a spring ligament tear on the peritalar stability. The secondary aim was to assess the effect of TCNL reconstruction in restoration of peritalar stability in comparison with other medial stabilization procedures, anatomic spring or deltoid ligament reconstructions, in a cadaveric flatfoot model. METHODS: Ten fresh-frozen cadaveric foot specimens were used. Reflective markers were mounted on the tibia, talus, navicular, calcaneus, and first metatarsal. Peritalar joint kinematics were captured by a multiple-camera motion capture system. Mild, moderate, and severe flatfoot models were created by sequential sectioning of medial capsuloligament complex followed by cyclic axial loading. Spring only, deltoid only, and combined deltoid-spring ligament (TCNL) reconstructions were performed. The relative kinematic changes were compared using 2-way analysis of variance (ANOVA). RESULTS: Compared with the initial condition, we noted significantly increased valgus alignment of the subtalar joint of 5.1 ± 2.3 degrees (P = .031) and 5.8 ± 2.7 degrees (P < .01) with increased size of the spring ligament tear to create moderate to severe flatfoot, respectively. We noted an increased tibiotalar valgus angle of 5.1 ± 2.0 degrees (P = .03) in the severe model. Although all medial ligament reconstruction methods were able to correct forefoot abduction, the TCNL reconstruction was able to correct both the subtalar and tibiotalar valgus deformity (P = .04 and P = .02, respectively). CONCLUSION: The TCNL complex provided stability to the talonavicular, subtalar, and tibiotalar joints. The combined deltoid-spring ligament (TCNL) reconstructions restored peritalar kinematics better than isolated spring or deltoid ligament reconstruction in the severe AAFD model. CLINICAL RELEVANCE: The combined deltoid-spring ligament (TCNL) reconstruction maybe considered in advanced AAFD with medial peritalar instability: stage IIB with a large spring ligament tear or stage IV.
Subject(s)
Foot Deformities, Acquired/surgery , Joint Instability/surgery , Ligaments, Articular/injuries , Ligaments, Articular/surgery , Plastic Surgery Procedures/methods , Adult , Biomechanical Phenomena , Cadaver , Female , Humans , Middle AgedABSTRACT
Massive craniofacial bone loss poses a clinical challenge to maxillofacial surgeons. Structural bone allografts are readily available at tissue banks but are rarely used due to a high failure rate. Previous studies showed that intermittent administration of recombinant parathyroid hormone (rPTH) enhanced integration of allografts in a murine model of calvarial bone defect. To evaluate its translational potential, the hypothesis that rPTH would enhance healing of a mandibular allograft in a clinically relevant large animal model of mandibulectomy was tested. Porcine bone allografts were implanted into a 5-cm-long continuous mandible bone defect in six adult Yucatan minipigs, which were randomized to daily intramuscular injections of rPTH (1.75 µg/kg) and placebo (n = 3). Blood tests were performed on Day 56 preoperation, Day 0 and on Day 56 postoperation. Eight weeks after the surgery, bone healing was analyzed using high-resolution X-ray imaging (Faxitron and micro computed tomography [CT]) and three-point bending biomechanical testing. The results showed a significant 2.6-fold rPTH-induced increase in bone formation (p = 0.02). Biomechanically, the yield failure properties of the healed mandibles were significantly higher in the rPTH group (yield load: p < 0.05; energy to yield: p < 0.01), and the post-yield displacement and energy were higher in the placebo group (p < 0.05), suggesting increased mineralized integration of the allograft in the rPTH group. In contrast to similar rPTH therapy studies in dogs, no signs of hypercalcemia, hyperphosphatemia, or inflammation were detected. Taken together, we provide initial evidence that rPTH treatment enhances mandibular allograft healing in a clinically relevant large animal model.
Subject(s)
Bone Transplantation , Mandible/transplantation , Mandibular Injuries/therapy , Mandibular Osteotomy , Osteogenesis/drug effects , Teriparatide/pharmacology , Allografts , Animals , Female , Swine , Swine, MiniatureABSTRACT
Flexor tendon injuries heal with excessive scar tissue that limits range of motion and increases incidence of re-rupture. The molecular mechanisms that govern tendon healing are not well defined. Both the canonical nuclear factor kappa B (NF-κB) and mitogen activated protein kinase (MAPK) pathways have been implicated in tendon healing. The gene NFKB1 (proteins p105/p50) is involved in both NF-κB and MAPK signaling cascades. In the present study, we tested the hypothesis that global NFKB1 deletion would increase activation of both NF-κB and MAPK through loss of signaling repressors, resulting in increased matrix deposition and altered biomechanical properties. As hypothesized, NFKB1 deletion increased activation of both NF-κB and MAPK signaling. While gliding function was not affected, NFKB1 deletion resulted in tendons that were significantly stiffer and trending towards increased strength by four weeks post-repair. NFKB1 deletion resulted in increased collagen deposition, increase macrophage recruitment, and increased presence of myofibroblasts. Furthermore, NFKB1 deletion increased expression of matrix-related genes (Col1a1, Col3a1), macrophage-associated genes (Adgre1, Ccl2), myofibroblast markers (Acta2), and general inflammation (Tnf). Taken together, these data suggest that increased activation of NF-κB and MAPK via NFKB1 deletion enhance macrophage and myofibroblast content at the repair, driving increased collagen deposition and biomechanical properties.
Subject(s)
Macrophages/metabolism , Myofibroblasts/metabolism , NF-kappa B p50 Subunit/metabolism , Tendon Injuries/metabolism , Wound Healing , Actins/metabolism , Animals , Calcium-Binding Proteins/metabolism , Chemokine CCL2/metabolism , Collagen/metabolism , Gene Deletion , Mice , NF-kappa B p50 Subunit/genetics , Receptors, G-Protein-Coupled/metabolism , Signal Transduction , Tendons/cytology , Tendons/metabolism , Tumor Necrosis Factor-alpha/metabolismABSTRACT
Identification of pro-regenerative approaches to improve tendon healing is critically important as the fibrotic healing response impairs physical function. In the present study we tested the hypothesis that S100a4 haploinsufficiency or inhibition of S100a4 signaling improves tendon function following acute injury and surgical repair in a murine model. We demonstrate that S100a4 drives fibrotic tendon healing primarily through a cell non-autonomous process, with S100a4 haploinsufficiency promoting regenerative tendon healing. Moreover, inhibition of S100a4 signaling via antagonism of its putative receptor, RAGE, also decreases scar formation. Mechanistically, S100a4 haploinsufficiency decreases myofibroblast and macrophage content at the site of injury, with both cell populations being key drivers of fibrotic progression. Moreover, S100a4-lineage cells become α-SMA+ myofibroblasts, via loss of S100a4 expression. Using a combination of genetic mouse models, small molecule inhibitors and in vitro studies we have defined S100a4 as a novel, promising therapeutic candidate to improve tendon function after acute injury.
Subject(s)
Cicatrix/pathology , Regeneration , S100 Calcium-Binding Protein A4/metabolism , Tendon Injuries/pathology , Animals , Disease Models, Animal , Haploinsufficiency , Macrophages/physiology , Mice , Myofibroblasts/physiology , S100 Calcium-Binding Protein A4/geneticsABSTRACT
Osteomyelitis is a chronic bone infection that is often treated with adjuvant antibiotic-impregnated poly(methyl methacrylate) (PMMA) cement spacers in multi-staged revisions. However, failure rates remain substantial due to recurrence of infection, which is attributed to the poor performance of the PMMA cement as a drug release device. Hence, the objective of this study was to design and evaluate a bioresorbable calcium phosphate scaffold (CaPS) for sustained antimicrobial drug release and investigate its efficacy in a murine model of femoral implant-associated osteomyelitis. Incorporating rifampin and sitafloxacin, which are effective against bacterial phenotypes responsible for bacterial persistence, into 3D-printed CaPS coated with poly(lactic co-glycolic) acid, achieved controlled release for up to two weeks. Implantation into the murine infection model resulted in decreased bacterial colonization rates at 3- and 10-weeks post-revision for the 3D printed CaPS in comparison to gentamicin-laden PMMA. Furthermore, a significant increase in bone formation was observed for 3D printed CaPS incorporated with rifampin at 3 and 10 weeks. The results of this study demonstrate that osteoconductive 3D printed CaPS incorporated with antimicrobials demonstrate more efficacious bacterial colonization outcomes and bone growth in a single-stage revision in comparison to gentamicin-laden PMMA requiring a two-stage revision.
ABSTRACT
Type I and Type II Diabetes dramatically impair skeletal health. Altered Insulin Receptor (IR) signaling is a common feature of both diseases, and insulin has potent bone anabolic functions. Several previous studies have demonstrated that loss of IR in bone cells results in disrupted bone homeostasis during early post-natal growth. Here we have deleted IR in S100a4-lineage cells (IRcKOS100a4) and assessed the effects on bone homeostasis in both young (15â¯weeks) and older adult (48â¯weeks) mice. S100a4-Cre has previously been shown to target the perichondrium during bone development, and here we show that S100a4 is expressed by adult trabecular and cortical bone cells, and that S100a4-Cre effectively targets adult bone, resulting in efficient deletion of IRß. Deletion of IRß in S100a4-lineage cells does not affect initial bone acquisition or homeostasis with no changes in cortical, trabecular or mechanical properties at 15-weeks of age, relative to wild type (WT) littermates. However, by 48-weeks of age, IRcKOS100a4 mice display substantial declines in trabecular bone volume, bone volume fraction and torsional rigidity, relative to age-matched WT controls. This work establishes the utility of using S100a4-cre to target bone and demonstrates that IRß in S100a4-lineage cells is required for maintenance of bone homeostasis in adult mice.
ABSTRACT
The functional role of Pax7-expressing satellite cells (SCs) in postnatal skeletal muscle development beyond weaning remains obscure. Therefore, the relevance of SCs during prepubertal growth, a period after weaning but prior to the onset of puberty, has not been examined. Here, we have characterized mouse skeletal muscle growth during prepuberty and found significant increases in myofiber cross-sectional area that correlated with SC-derived myonuclear number. Remarkably, genome-wide RNA-sequencing analysis established that post-weaning juvenile and early adolescent skeletal muscle have markedly different gene expression signatures. These distinctions are consistent with extensive skeletal muscle maturation during this essential, albeit brief, developmental phase. Indelible labeling of SCs with Pax7CreERT2/+ ; Rosa26nTnG/+ mice demonstrated SC-derived myonuclear contribution during prepuberty, with a substantial reduction at puberty onset. Prepubertal depletion of SCs in Pax7CreERT2/+ ; Rosa26DTA/+ mice reduced myofiber size and myonuclear number, and caused force generation deficits to a similar extent in both fast and slow-contracting muscles. Collectively, these data demonstrate SC-derived myonuclear accretion as a cellular mechanism that contributes to prepubertal hypertrophic skeletal muscle growth.