Electrochemical screening of self-assembling beta-sheet peptides using supported phospholipid monolayers.

In the context of the medical applications of beta-sheet self-assembling peptides, it is important to be able to predict their activity at the biological membrane level. A study of the interaction of four systematically varied 11-residue (P11-1, P11-2, P11-6 and P11-7) and one 13-residue (P13-1) designed beta-sheet self-assembling peptides with DOPC monolayers on a mercury electrode is reported in this paper. Experiments were carried out in 0.1 mol dm(-3) KCl electrolyte with added phosphate buffer (0.001 mol dm(-3)) at pH approximately 7.6. The capacity-potential curves of the coated electrode in the presence and absence of the different peptides were measured using out-of-phase ac voltammetry. The frequency dependence of the complex impedance of the coated electrode surfaces in the presence and absence of the peptides was estimated between 65,000 and 0.1 Hz at -0.4V versus Ag/AgCl 3.5 mol(-3) dm(-3) KCl. The monolayer permeabilising properties of the peptides were studied by following the reduction of Tl(I) to Tl(Hg) at the coated electrode. Of the five peptides studied, P11-2, P11-7 and P13-1 interact most strongly with the DOPC layer. P11-1 which has a polar primary structure shows no obvious interaction with the phospholipid but surprisingly, it permeabilises the phospholipid layer to Tl(+).

Structural and kinetic studies of a series of mutants of galactose oxidase identified by directed evolution.

Galactose oxidase (GO; E.C. 1.1.3.9) is a copper- containing enzyme that oxidizes a range of primary alcohols to aldehydes. This broad substrate specificity is reflected in a high K(M) for substrates. Directed evolution has previously been used to select variants of GO that exhibit enhanced expression and kinetic properties. In assays using unpurified enzyme samples, the variant C383S displayed a 5-fold lower K(M) than wild-type GO. In the present study, we have constructed, expressed, purified and characterized a number of single, double and triple mutants at residues Cys383, Tyr436 and Val494, identified in one of the directed evolution studies, to examine their relative contributions to improved catalytic activity of GO. We report kinetic studies on the various mutant enzymes. In addition, we have determined the three-dimensional structure of the C383S variant. As with many mutations identified in directed evolution experiments, the availability of structural information does not provide a definitive answer to the reason for the improved K(M) in the C383S variant protein.

Cofactor processing in galactose oxidase.

Galactose oxidase (GO; EC 1.1.3.9) is a monomeric 68 kDa enzyme that contains a single copper and an amino acid-derived cofactor. The mechanism of this radical enzyme has been widely studied by structural, spectroscopic, kinetic and mutational approaches and there is a reasonable understanding of the catalytic mechanism and activation by oxidation to generate the radical cofactor that resides on Tyr-272, one of the copper ligands. Biogenesis of this cofactor involves the post-translational, autocatalytic formation of a thioether cross-link between the active-site residues Cys-228 and Tyr-272. This process is closely linked to a peptide bond cleavage event that releases the N-terminal 17-amino-acid pro-peptide. We have shown using pro-enzyme purified in copper-free conditions that mature oxidized GO can be formed by an autocatalytic process upon addition of copper and oxygen. Structural comparison of pro-GO (GO with the prosequence present) with mature GO reveals overall structural similarity, but with some regions showing significant local differences in main chain position and some active-site-residue side chains differing significantly from their mature enzyme positions. These structural effects of the pro-peptide suggest that it may act as an intramolecular chaperone to provide an open active-site structure conducive to copper binding and chemistry associated with cofactor formation. Various models can be proposed to account for the formation of the thioether bond and oxidation to the radical state; however, the mechanism of prosequence cleavage remains unclear.

Crystal structure of the precursor of galactose oxidase: an unusual self-processing enzyme.

Galactose oxidase (EC ) is a monomeric enzyme that contains a single copper ion and catalyses the stereospecific oxidation of primary alcohols to their corresponding aldehydes. The protein contains an unusual covalent thioether bond between a tyrosine, which acts as a radical center during the two-electron reaction, and a cysteine. The enzyme is produced in a precursor form lacking the thioether bond and also possessing an additional 17-aa pro-sequence at the N terminus. Previous work has shown that the aerobic addition of Cu(2+) to the precursor is sufficient to generate fully processed mature enzyme. The structure of the precursor protein has been determined to 1.4 A, revealing the location of the pro-sequence and identifying structural differences between the precursor and the mature protein. Structural alignment of the precursor and mature forms of galactose oxidase shows that five regions of main chain and some key residues of the active site differ significantly between the two forms. The precursor structure provides a starting point for modeling the chemistry of thioether bond formation and pro-sequence cleavage.

Conserved tyrosine-369 in the active site of Escherichia coli copper amine oxidase is not essential.

Copper amine oxidases are homodimeric enzymes that catalyze two reactions: first, a self-processing reaction to generate the 2,4,5-trihydroxyphenylalanine (TPQ) cofactor from an active site tyrosine by a single turnover mechanism; second, the oxidative deamination of primary amine substrates with the production of aldehyde, hydrogen peroxide, and ammonia catalyzed by the mature enzyme. The importance of active site residues in both of these processes has been investigated by structural studies and site-directed mutagenesis in enzymes from various organisms. One conserved residue is a tyrosine, Tyr369 in the Escherichia coli enzyme, whose hydroxyl is hydrogen bonded to the O4 of TPQ. To explore the importance of this site, we have studied a mutant enzyme in which Tyr369 has been mutated to a phenylalanine. We have determined the X-ray crystal structure of this variant enzyme to 2.1 A resolution, which reveals that TPQ adopts a predominant nonproductive conformation in the resting enzyme. Reaction of the enzyme with the irreversible inhibitor 2-hydrazinopyridine (2-HP) reveals differences in the reactivity of Y369F compared with wild type with more efficient formation of an adduct (lambda(max) = 525 nm) perhaps reflecting increased mobility of the TPQ adduct within the active site of Y369F. Titration with 2-HP also reveals that both wild type and Y369F contain one TPQ per monomer, indicating that Tyr369 is not essential for TPQ formation, although we have not measured the rate of TPQ biogenesis. The UV-vis spectrum of the Y369F protein shows a broader peak and red-shifted lambda(max) at 496 nm compared with wild type (480 nm), consistent with an altered electronic structure of TPQ. Steady-state kinetic measurements reveal that Y369F has decreased catalytic activity particularly below pH 6.5 while the K(M) for substrate beta-phenethylamine increases significantly, apparently due to an elevated pK(a) (5.75-6.5) for the catalytic base, Asp383, that should be deprotonated for efficient binding of protonated substrate. At pH 7.0, the K(M) for wild type and Y369F are similar at 1.2 and 1.5 microM, respectively, while k(cat) is decreased from 15 s(-1) in wild type to 0.38 s(-1), resulting in a 50-fold decrease in k(cat)/K(M) for Y369F. Transient kinetics experiments indicate that while the initial stages of enzyme reduction are slower in the variant, these do not represent the rate-limiting step. Previous structural and solution studies have implicated Tyr369 as a component of a proton shuttle from TPQ to dioxygen. The moderate changes in kinetic parameters observed for the Y369F variant indicate that if this is the case, then the absence of the Tyr369 hydroxyl can be compensated for efficiently within the active site.

Visualization of dioxygen bound to copper during enzyme catalysis.

X-ray crystal structures of three species related to the oxidative half of the reaction of the copper-containing quinoprotein amine oxidase from Escherichia coli have been determined. Crystals were freeze-trapped either anaerobically or aerobically after exposure to substrate, and structures were determined to resolutions between 2.1 and 2.4 angstroms. The oxidation state of the quinone cofactor was investigated by single-crystal spectrophotometry. The structures reveal the site of bound dioxygen and the proton transfer pathways involved in oxygen reduction. The quinone cofactor is regenerated from the iminoquinone intermediate by hydrolysis involving Asp383, the catalytic base in the reductive half-reaction. Product aldehyde inhibits the hydrolysis, making release of product the rate-determining step of the reaction in the crystal.

The active site base controls cofactor reactivity in Escherichia coli amine oxidase: x-ray crystallographic studies with mutational variants.

Amine oxidases utilize a proton abstraction mechanism following binding of the amine substrate to the C5 position of the cofactor, the quinone form of trihydroxyphenylalanine (TPQ). Previous work [Wilmot, C. M., et al. (1997) Biochemistry 36, 1608-1620] has shown that Asp383 in Escherichia coliamine oxidase (ECAO) is the catalytic base which performs the key step of proton abstraction. This paper explores in more depth this and other roles of Asp383. The crystal structures of three mutational variants are presented together with their catalytic properties, visible spectra, and binding properties for a substrate-like inhibitor, 2-hydrazinopyridine (2-HP), in comparison to those of the wild type enzyme. In wild type ECAO, the TPQ is located in a wedge-shaped pocket which allows more freedom of movement at the substrate binding position (C5) than for TPQ ring carbons C1-C4. A role of Asp383, whose carboxylate is located close to O5, is to stabilize the TPQ in its major conformation in the pocket. Replacement of Asp383 with the isostructural, but chemically distinct, Asn383 does not affect the location or dynamics of the TPQ cofactor significantly, but eliminates catalytic activity and drastically reduces the affinity for 2-HP. Removal of the side chain carboxyl moiety, as in Ala383, additionally allows the TPQ the greater conformational flexibility to coordinate to the copper, which demonstrates that Asp383 helps maintain the active site structure by preventing TPQ from migrating to the copper. Glu383 has a greatly decreased catalytic activity, as well as a decreased affinity for 2-HP relative to that of wild type ECAO. The electron density reveals that the longer side chain of Glu prevents the pivotal motion of the TPQ by hindering its movement within the wedge-shaped active site pocket. The results show that Asp383 performs multiple roles in the catalytic mechanism of ECAO, not only in acting as the active site base at different stages of the catalytic cycle but also in regulating the mobility of the TPQ that is essential to catalysis.

Conformation and ion-channeling activity of a 27-residue peptide modeled on the single-transmembrane segment of the IsK (minK) protein.

IsK (minK) protein, in concert with another channel protein KVLQT1, mediates a distinct, slowly activating, voltage-gated potassium current across certain mammalian cell membranes. Site-directed mutational studies have led to the proposal that the single transmembrane segment of IsK participates in the pore of the potassium channel [Takumi, T. (1993) News Physiol. Sci. 8, 175-178]. We present functional and structural studies of a short peptide (K27) with primary structure NH2-1KLEALYILMVLGFFGFFTLGIMLSYI27R-COOH, corresponding to the transmembrane segment of IsK (residues 42-68). When K27 was incorporated, at low concentrations, into phosphatidylethanolamine, black-lipid membranes, single-channel activity was observed, with no strong ion selectivity. IR measurements reveal the peptide has a predominantly helical conformation in the membrane. The atomic resolution structure of the helix has been established by high-resolution 1H NMR spectroscopy studies. These studies were carried out in a solvent comprising 86% v/v 1,1,1,3,3,3-hexafluoro-isopropanol-14% v/v water, in which the IR spectrum of the peptide was found to be very similar to that observed in the bilayer. The NMR studies have established that residues 1-3 are disordered, while residues 4-27 have an alpha-helical conformation, the helix being looser near the termini and more stable in the central region of the molecule. The length (2. 6 nm) of the hydrophobic segment of the helix, residues 7-23, matches the span of the hydrocarbon chains (2.3 +/- 0.25 nm) of fully hydrated bilayers of phosphatidylcholine lipid mixture from egg yolk. The side chains on the helix surface are predominantly hydrophobic, consistent with a transmembrane location of the helix. The ion-channeling activity is believed to stem from long-lived aggregates of these helices. The aggregation is mediated by the pi-pi stacking of phenylalanine aromatic rings of adjacent helices and favorable interactions of the opposing aliphatic-like side chains, such as leucine and methionine, with the lipid chains of the bilayer. This mechanism is in keeping with site-directed mutational studies which suggest that the transmembrane segment of IsK is an integral part of the pore of the potassium channel and has a similar disposition to that in the peptide model system.

A single-residue deletion alters the lipid selectivity of a K+ channel-associated peptide in the beta-conformation: spin label electron spin resonance studies.

Lipid-peptide interactions with the 27-residue peptide of sequence KLEALYILMVLGFFGFFTLGIMLSYIR reconstituted as beta-sheet assemblies in dimyristoylphosphatidylcholine bilayers have been studied by electron spin resonance (ESR) spectroscopy with spin-labeled lipids. The peptide corresponds to residues 42-68 of the IsK voltage-gated K+ channel protein and contains the single putative transmembrane span of this protein. Lipid-peptide interactions give rise to a second component in the ESR spectra of lipids spin-labeled on the 14C atom of the chain that corresponds to restriction of the lipid mobility by direct interaction with the peptide assemblies. From the dependence on the lipid/peptide ratio, the stoichiometry of lipid interaction is found to be about two phospholipids/peptide monomer. The sequence of selectivity for lipid association with the peptide assemblies is in the order phosphatidic acid > stearic acid = phosphatidylserine > phosphatidylglycerol = phosphatidylcholine. Comparison with previous data for a corresponding 26-residue mutant peptide with a single deletion of the apolar residue Leu2 (Horvath et al., 1995. Biochemistry 34:3893-3898), indicates a very similar mode of membrane incorporation for native and mutant peptides, but a strongly modified pattern and degree of specificity for the interaction with negatively charged lipids. The latter is interpreted in terms of the relative orientations of the charged amino acid side chains in the beta-sheet assemblies of the native and deletion-mutant peptides.

Equilibrium and non-equilibrium conformations of peptides in lipid bilayers.

A synthetic, hydrophobic, 27-amino-acid-residue peptide 'K27', modelled on the trans-membrane domain of the slow voltage-gated potassium channel, IsK, has been incorporated into a lipid bilayer and its conformational properties studied using FT-IR spectroscopy. The conformation following reconstitution is found to be dependent on the nature of the solvent employed. When the reconstitution is conducted by solvent evaporation from a methanol solution, aggregates comprised of beta-strands are stabilised and their concentration is essentially invariant with time. By contrast, when trifluoroethanol is used, the initial conformation of the peptide is alpha-helical. This then relaxes to an equilibrium state between alpha-helices and beta-strands. The alpha-helix-to beta-strand conversion rate is relatively slow, and this allows the kinetics to be studied by FT-IR spectroscopy. The reverse process is much slower but again can be demonstrated by FT-IR. Thus, it appears that a true equilibrium structure can only be achieved by starting with peptide in the alpha-helical conformation. We believe this result should be of general validity for hydrophobic peptide reconstitution. The implications for conformational changes in membrane proteins are discussed.

Responsive gels formed by the spontaneous self-assembly of peptides into polymeric beta-sheet tapes.

Molecular self-assembly is becoming an increasingly popular route to new supramolecular structures and molecular materials. The inspiration for such structures is commonly derived from self-assembling systems in biology. Here we show that a biological motif, the peptide beta-sheet, can be exploited in designed oligopeptides that self-assemble into polymeric tapes and with potentially useful mechanical properties. We describe the construction of oligopeptides, rationally designed or based on segments of native proteins, that aggregate in suitable solvents into long, semi-flexible beta-sheet tapes. These become entangled even at low volume fractions to form gels whose viscoelastic properties can be controlled by chemical (pH) or physical (shear) influences. We suggest that it should be possible to engineer a wide range of properties in these gels by appropriate choice of the peptide primary structure.

Catalytic mechanism of the quinoenzyme amine oxidase from Escherichia coli: exploring the reductive half-reaction.

The crystal structure of the complex between the copper amine oxidase from Escherichia coli (ECAO) and a covalently bound inhibitor, 2-hydrazinopyridine, has been determined to a resolution of 2.0 A. The inhibitor covalently binds at the 5 position of the quinone ring of the cofactor, 2,4,5-trihydroxyphenylalaninequinone (TPQ). The inhibitor complex is analogous to the substrate Schiff base formed during the reaction with natural monoamine substrate. A proton is abstracted from a methylene group adjacent to the amine group by a catalytic base during the reaction. The inhibitor, however, has a nitrogen at this position, preventing proton abstraction and trapping the enzyme in a covalent complex. The electron density shows this nitrogen is hydrogen bonded to the side chain of Asp383, a totally conserved residue, identifying it as the probable catalytic base. The positioning of Asp383 is such that the pro-S proton of a substrate would be abstracted, consistent with the stereospecificity of the enzyme determined by 1H NMR spectroscopy. Site-directed mutagenesis and in vivo suppression have been used to substitute Asp383 for 12 other residues. The resulting proteins either lack or, in the case of glutamic acid, have very low enzyme activity consistent with an essential catalytic role for Asp383. The O4 position on the quinone ring is involved in a short hydrogen bond with the hydroxyl of conserved residue Tyr369. The distance between the oxygens is less than 2.5 A, consistent with a shared proton, and suggesting ionization at the O4 position of the quinone ring. The Tyr369 residue appears to play an important role in stabilizing the position of the quinone/inhibitor complex. The O2 position on the quinone ring is hydrogen bonded to the apical water ligand of the copper. The basal water ligand, which lies 2.0 A from the copper in the native structure, is at a distance of 3.0 A in the complex. In the native structure, the active site is completely buried, with no obvious route for entry of substrate. In the complex, the tip of the pyridine ring of the bound inhibitor is on the surface of the protein at the edge of the interface between domains 3 and 4, suggesting this as the entry point for the amine substrate.

Peptides modeled on the transmembrane region of the slow voltage-gated IsK potassium channel: structural characterization of peptide assemblies in the beta-strand conformation.

A 27-residue peptide, having a sequence corresponding to the transmembrane domain of the IsK protein with slow voltage-gated potassium channel activity, has been incorporated into synthetic saturated-chain phospholipid membranes. The peptide-lipid complexes have been characterized by attenuated-total-reflection Fourier-transform-infrared spectroscopy (ATR-FTIR), spin-label electron spin resonance (ESR) spectroscopy, 31P and 2H nuclear magnetic resonance (NMR) spectroscopy, differential scanning calorimetry, and low-angle X-ray diffraction. From FTIR spectroscopy, it is found that, when reconstituted into membranes by dialysis from 2-chloroethanol, the peptide has a predominantly beta-strand secondary structure in which the peptide backbone is oriented at an angle of approximately 56 degrees relative to the membrane normal in dry films of phosphatidylcholines. Hydration of the dry film in the gel phase does not appear to affect the orientation of the peptide backbone, and a relatively small change in orientation occurs when the bilayer undergoes the transition to the fluid phase. The ESR and NMR spectra from spin-labeled and 2H-labeled phospholipids, respectively, indicate that the incorporated peptide restricts the rotational motion of the lipids, without appreciably affecting the chain order, in a way similar to that found for integral membrane proteins. The characteristic two-component ESR spectra from spin-labeled lipids further indicate a selectivity in the interaction of anionic phospholipids with the peptide. The motional restriction of the chains of the spin-labeled phosphatidylcholine and the reduction in the enthalpy of the lipid chain-melting transition indicate that, on average, approximately two to three phospholipid molecules interact directly with each peptide monomer, which is consistent with a limited degree of aggregation of the beta-sheet structures. Both 31P NMR spectroscopy and X-ray diffraction indicate that the lipid-peptide complexes have a lamellar structure up to the highest peptide concentration studied (Rp = 0.2). The surface area occupied by lipid molecules (ca. 30 A2 per chain) in the peptide complexes, deduced from the lamellar repeat spacings at defined water content, is very similar to that in pure fluid lipid bilayers, consistent with the 2H NMR results. The additional membrane surface area contributed by the peptide is approximately 112 A2 per monomer. This large value for the peptide area in the fluid bilayer is consistent with the ATR studies of dry peptide/lipid films which suggest that the long axis of the beta-strand is strongly tilted with respect to the bilayer normal (56 degrees in the dry film).

Crystal structure of a quinoenzyme: copper amine oxidase of Escherichia coli at 2 A resolution.

BACKGROUND: Copper amine oxidases are a ubiquitous and novel group of quinoenzymes that catalyze the oxidative deamination of primary amines to the corresponding aldehydes, with concomitant reduction of molecular oxygen to hydrogen peroxide. The enzymes are dimers of identical 70-90 kDa subunits, each of which contains a single copper ion and a covalently bound cofactor formed by the post-translational modification of a tyrosine side chain to 2,4,5-trihydroxyphenylalanine quinone (TPQ). RESULTS: The crystal structure of amine oxidase from Escherichia coli has been determined in both an active and an inactive form. The only structural differences are in the active site, where differences in copper coordination geometry and in the position and interactions of the redox cofactor, TPQ, are observed. Each subunit of the mushroom-shaped dimer comprises four domains: a 440 amino acid C-terminal beta sandwich domain, which contains the active site and provides the dimer interface, and three smaller peripheral alpha/beta domains (D1-D3), each of about 100 amino acids. D2 and D3 show remarkable structural and sequence similarity to each other and are conserved throughout the quinoenzyme family. In contrast, D1 is absent from some amine oxidases. The active sites are well buried from solvent and lie some 35 A apart, connected by a pair of beta hairpin arms. CONCLUSIONS: The crystal structure of E. coli copper amine oxidase reveals a number of unexpected features and provides a basis for investigating the intriguing similarities and differences in catalytic mechanism of members of this enzyme family. In addition to the three conserved histidines that bind the copper, our studies identify a number of other conserved residues close to the active site, including a candidate for the catalytic base and a fourth conserved histidine which is involved in an interesting intersubunit interaction.

Structure and mechanism of galactose oxidase. The free radical site.

Crystallographic and spectroscopic studies on galactose oxidase have shown that the active site involves a free radical on tyrosine 272, one of the ligands coordinated to the Cu2+ cofactor. A novel thioether bond between tyrosine 272 and cysteine 228, and a stacking tryptophan 290, over this bond, are features of the crystal structure. The present study describes the development of a high level heterologous expression system for galactose oxidase and the construction of mutational variants at these key active site residues. The expressed wild-type enzyme and mutational variants (W290H and C228G) have been characterized by x-ray crystallography, visible spectroscopy, and catalytic activity measurements. A further variant protein, Y272F, could not be purified. The data establish that the thioether bond and stacking tryptophan are essential for activity and further support a role for tryptophan 290 as a component of the free radical site.

Crystal structure of a free radical enzyme, galactose oxidase.

The crystal structure of the copper-containing enzyme, galactose oxidase, has been solved by multiple isomorphous replacement and refined to a resolution of 1.7 A. The X-ray structure reveals a unique polypeptide fold. The protein can be divided into three domains, all of which consist almost entirely of beta-strands. The structure of the second domain is particularly striking, 28 beta-strands arranged in a pseudo 7-fold symmetry. The copper site is on the surface of the protein and extremely rich in aromatic side-chains. The copper ion has two histidines, two tyrosines, and one external ligand in distorted square pyramidal coordination. The presence of pyrroloquinoline quinone as a covalently bound cofactor in GOase has been excluded. Instead, an unexpected covalent linkage between Tyr272 and Cys228 has been observed, whose functional role may relate to the presence of a tyrosine free radical at Tyr272. The tyrosine free radical could be stabilized by delocalization to Cys228 and stacking interactions with Trp290. A structural model for substrate binding is proposed that offers an explanation for the substrate specificity of the enzyme and many of the spectroscopic and enzymological data. Although the model lacks direct confirmation at present, it should provide a stimulus for further spectroscopic and crystallographic studies.