Conservative management of proximal hamstring avulsion: A clinical study.

Introduction: The management of proximal hamstring tear (PHT) is debated and consensus regarding recommended measures and individual treatment regimens is lacking. The present investigation evaluated the efficacy of a conservative management of partial and complete PHT. Methods: The present observational study was conducted following the STROBE statement. In June 2018 the medical databases of the BG Klinikum Bergmannstrost Halle, Germany were accessed. All the patients with PHT were retrieved. The outcomes of interest were to evaluate the clinical examination, PROMs, imaging, and isokinetic muscle strength at the baseline and last follow-up. Results: 31 patients were enrolled in the present study. Nine patients (29 % (9 of 31) described local pain at the ischial tuberosity in sitting situations and also in manual palpation. A persistent gap in the tendon string beneath the tuberosity in manual palpation was reported in 25.8 % (8 of 31). The mean VAS at the last follow-up was 2.3 ± 2.3. The mean LEFS score was 50.9 ± 18.8.Control MRI at follow-up showed scarring restitution in the proximal tendon in all patients in the partial tear group. In the complete tear group, a persisting defect state of the proximal tendon course was found in 45 % (9 of 20). The injured side achieved 81.5 ± 22.2 % of the force of the uninjured side, measured in the flexion movement at 60°/s. At an angular velocity of 240°/s, 83.2 ± 26.3 % of the force of the uninjured side was achieved. Conclusion: According to the main findings of the present study, conservative therapy of PTH tears is associated with good clinical outcomes. High-quality investigations are required to establish the proper therapeutic algorithm and advantages of conservative management compared to a surgical approach. Level of evidence: Level III.

A Platform for Testing the Biocompatibility of Implants: Silicone Induces a Proinflammatory Response in a 3D Skin Equivalent.

Biocompatibility testing of materials is carried out in 2D cell cultures or animal models despite serious limitations. 3D skin equivalents are advanced in vitro models for human skin. Silicone has been shown to be noncytotoxic but capable of eliciting an immune response. Our aim was to (1) establish a 3D skin equivalent to (2) assess the proinflammatory properties of silicone. We developed a coculture of keratinocytes and fibroblasts resulting in a 3D skin equivalent with an implant using samples from a breast implant. Samples with and without the silicone implant were studied histologically and immunohistochemically in comparison to native human skin samples. Cytotoxicity was assessed via LDH-assay, and cytokine response was assessed via ELISA. Histologically, our 3D skin equivalents had a four-layered epidermal and a dermal component. The presence of tight junctions was demonstrated in immunofluorescence. The only difference in 3D skin equivalents with implants was an epidermal thinning. Implanting the silicone samples did not cause more cell death, however, an inflammatory cytokine response was triggered. We were able to establish an organotypical 3D skin equivalent with an implant, which can be utilised for studies on biocompatibility of materials. This first integration of silicone into a 3D skin equivalent confirmed previous findings on silicone being non-cell-toxic but capable of exerting a proinflammatory effect.

Paediatric spine injuries in the thoracic and lumbar spine-results of the German multicentre CHILDSPINE study.

BACKGROUND: Paediatric thoracolumbar spine injuries are rare, and meaningful epidemiological data are lacking. OBJECTIVES: The aim of this study was to provide epidemiological data for paediatric patients with thoracolumbar spinal trauma in Germany with a view to enhancing future decision-making in relation to the diagnostics and treatment of these patients. MATERIALS AND METHODS: A retrospective multicentre study includes patients up to 16 years of age who were suffering from thoracolumbar spine injuries who had been treated in six German spine centres between 01/2010 and 12/2016. The clinical database was analysed for patient-specific data, trauma mechanisms, level of injury, and any accompanying injuries. Diagnostic imaging and subsequent treatment were investigated. Patients were divided into three age groups for further evaluation: age group I (0-6 years), age group II (7-9 years) and age group III (10-16 years). RESULTS: A total of 153 children with 345 thoracolumbar spine injuries met the inclusion criteria. The mean age at the time of hospitalization due to the injury was 12.9 (± 3.1) years. Boys were likelier to be affected (1:1.3). In all age groups, falls and traffic accidents were the most common causes of thoracolumbar spine injuries. A total of 95 patients (62.1%) were treated conservatively, while 58 (37.9%) of the children underwent surgical treatment. Minimally invasive procedures were the most chosen procedures. Older children and adolescents were likelier to suffer from higher-grade injuries according to the AOSpine classification. The thoracolumbar junction (T11 to L2) was the most affected level along the thoracolumbar spine (n = 90). Neurological deficits were rarely seen in all age groups. Besides extremity injuries (n = 52, 30.2%), head injuries represented the most common accompanying injuries (n = 53, 30.8%). Regarding spinal injuries, most of the patients showed no evidence of complications during their hospital stay (96.7%). CONCLUSIONS: The thoracolumbar junction was more frequently affected in older children and adolescents. The majority of thoracolumbar spinal column injuries were treated conservatively. Nevertheless, 37.9% of hospitalized children had to be treated surgically, and there was an acceptable complication rate for the surgeries that were performed.

Tether pre-tension within vertebral body tethering reduces motion of the spine and influences coupled motion: a finite element analysis.

Anterior Vertebral Body Tethering (VBT) is a novel fusionless treatment option for selected adolescent idiopathic scoliosis patients which is gaining widespread interest. The primary objective of this study is to investigate the effects of tether pre-tension within VBT on the biomechanics of the spine including sagittal and transverse parameters as well as primary motion, coupled motion, and stresses acting on the L2 superior endplate. For that purpose, we used a calibrated and validated Finite Element model of the L1-L2 spine. The VBT instrumentation was inserted on the left side of the L1-L2 segment with different cord pre-tensions and submitted to an external pure moment of 6 Nm in different directions. The range of motion (ROM) for the instrumented spine was measured from the initial post-VBT position. The magnitudes of the ROM of the native spine and VBT-instrumented with pre-tensions of 100 N, 200 N, and 300 N were, respectively, 3.29°, 2.35°, 1.90° and 1.61° in extension, 3.30°, 3.46°, 2.79°, and 2.17° in flexion, 2.11°, 1.67°, 1.33° and 1.06° in right axial rotation, and 2.10°, 1.88°, 1.48° and 1.16° in left axial rotation. During flexion-extension, an insignificant coupled lateral bending motion was observed in the native spine. However, VBT instrumentation with pre-tensions of 100 N, 200 N, and 300 N generated coupled right lateral bending of 0.85°, 0.81°, and 0.71° during extension and coupled left lateral bending of 0.32°, 0.24°, and 0.19° during flexion, respectively. During lateral bending, a coupled extension motion of 0.33-0.40° is observed in the native spine, but VBT instrumentation with pre-tensions of 100 N, 200 N, and 300 N generates coupled flexion of 0.67°, 0.58°, and 0.42° during left (side of the implant) lateral bending and coupled extension of 1.28°, 1.07°, and 0.87° during right lateral bending, respectively. Therefore, vertebral body tethering generates coupled motion. Tether pre-tension within vertebral body tethering reduces the motion of the spine.

An in vivo study to investigate an original intramedullary bone graft harvesting technology.

BACKGROUND: Harvesting bone graft (BG) from the intramedullary canal to treat bone defects is largely conducted using the Reamer-Irrigator-Aspirator (RIA) system. The RIA system uses irrigation fluid during harvesting, which may result in washout of osteoinductive factors. Here, we propose a new harvesting technology dedicated to improving BG collection without the potential washout effect of osteoinductive factors associated with irrigation fluid. This novel technology involves the conceptual approach of first aspirating the bone marrow (BM) with a novel aspirator prototype, followed by reaming with standard reamers and collecting the bone chips with the aspirator (reaming-aspiration method, R-A method). The aim of this study was to assess the harvesting efficacy and osteoinductive profile of the BG harvested with RIA 2 system (RIA 2 group) compared to the novel harvesting concept (aspirator + R-A method, ARA group). METHODS: Pre-planning computed tomography (CT) imaging was conducted on 16 sheep to determine the femoral isthmus canal diameter. In this non-recovery study, sheep were divided into two groups: RIA 2 group (n = 8) and ARA group (n = 8). We measured BG weight collected from left femur and determined femoral cortical bone volume reduction in postoperative CT imaging. Growth factor and inflammatory cytokine amounts of the BGs were quantified using enzyme-linked immunosorbent assay (ELISA) methods. RESULTS: The use of the stand-alone novel aspirator in BM collection, and in harvesting BG when the aspirator is used in conjunction with sequential reaming (R-A method) was proven feasible. ELISA results showed that the collected BG contained relevant amounts of growth factors and inflammatory cytokines in both the RIA 2 and the ARA group. CONCLUSIONS: Here, we present the first results of an innovative concept for harvesting intramedullary BG. It is a prototype of a novel aspirator technology that enables the stepwise harvesting of first BM and subsequent bone chips from the intramedullary canal of long bones. Both the BG collected with the RIA 2 system and the aspirator prototype had the capacity to preserve the BG's osteoinductive microenvironment. Future in vivo studies are required to confirm the bone regenerative capacity of BG harvested with the innovative harvesting technology.

The Concept of Scaffold-Guided Bone Regeneration for the Treatment of Long Bone Defects: Current Clinical Application and Future Perspective.

The treatment of bone defects remains a challenging clinical problem with high reintervention rates, morbidity, and resulting significant healthcare costs. Surgical techniques are constantly evolving, but outcomes can be influenced by several parameters, including the patient's age, comorbidities, systemic disorders, the anatomical location of the defect, and the surgeon's preference and experience. The most used therapeutic modalities for the regeneration of long bone defects include distraction osteogenesis (bone transport), free vascularized fibular grafts, the Masquelet technique, allograft, and (arthroplasty with) mega-prostheses. Over the past 25 years, three-dimensional (3D) printing, a breakthrough layer-by-layer manufacturing technology that produces final parts directly from 3D model data, has taken off and transformed the treatment of bone defects by enabling personalized therapies with highly porous 3D-printed implants tailored to the patient. Therefore, to reduce the morbidities and complications associated with current treatment regimens, efforts have been made in translational research toward 3D-printed scaffolds to facilitate bone regeneration. Three-dimensional printed scaffolds should not only provide osteoconductive surfaces for cell attachment and subsequent bone formation but also provide physical support and containment of bone graft material during the regeneration process, enhancing bone ingrowth, while simultaneously, orthopaedic implants supply mechanical strength with rigid, stable external and/or internal fixation. In this perspective review, we focus on elaborating on the history of bone defect treatment methods and assessing current treatment approaches as well as recent developments, including existing evidence on the advantages and disadvantages of 3D-printed scaffolds for bone defect regeneration. Furthermore, it is evident that the regulatory framework and organization and financing of evidence-based clinical trials remains very complex, and new challenges for non-biodegradable and biodegradable 3D-printed scaffolds for bone regeneration are emerging that have not yet been sufficiently addressed, such as guideline development for specific surgical indications, clinically feasible design concepts for needed multicentre international preclinical and clinical trials, the current medico-legal status, and reimbursement. These challenges underscore the need for intensive exchange and open and honest debate among leaders in the field. This goal can be addressed in a well-planned and focused stakeholder workshop on the topic of patient-specific 3D-printed scaffolds for long bone defect regeneration, as proposed in this perspective review.

Pediatric cervical spine injuries-results of the German multicenter CHILDSPINE study.

OBJECTIVES: The aim of this study was to provide epidemiological data of pediatric patients suffering from cervical spinal trauma in Germany, in order to integrate these data in future decision-making processes concerning diagnosis and therapy. MATERIALS AND METHODS: Retrospective multicenter study includes all patients up to 16 years suffering from cervical spine injuries who were treated in six German spine centers between 01/2010 and 12/2016. The clinical databases were screened for specific trauma mechanism, level of injury as well as accompanying injuries. Diagnostic imaging and the chosen therapy were analyzed. Patients were divided into three age groups for further evaluation: age group I (0-6 years), age group II (7-9 years), age group III (10-16 years). RESULTS: A total of 214 children with 265 cervical spine injuries were included during the mentioned period. The mean age at the time of injury was 11.9 (± 3.9) years. In age group I, 24 (11.2%) patients were included, age group II consisted of 22 patients (10.3%), and 168 patients belonged to age group III (78.5%). Girls and boys were equally affected. In all age groups, falls and traffic accidents were the most common causes of cervical spine injuries. A total of 180 patients (84.1%) were treated conservatively, while 34 (15.9%) children underwent surgery. Distorsion/whiplash injury was the most common entity (n = 165; 68.2%). Children aged 0-9 years had significantly (p < 0.001) more frequent injuries of the upper cervical spine (C0-C2) compared to older age groups. Patients of age group III were more likely to suffer from injuries in subaxial localizations. Neurological deficits were rarely seen in all age groups. Head injuries did represent the most common accompanying injuries (39.8%, n = 92). CONCLUSIONS: The upper cervical spine was more frequently affected in young children. Older children more often suffered from subaxial pathologies. The majority of cervical spinal column injuries were treated conservatively. Nevertheless, 15% of the hospitalized children had to be treated surgically.

Can radiologic parameters used to detect cervical spinal instability be used in patients with ankylosing spondylitis?

INTRODUCTION: Cervical spinal instability can be difficult to detect in the shock room setting even with the utilization of computed tomography (CT) scans. This may be especially true in patients with cervical degenerative disease, such as ankylosing spondylitis (AS). The purpose of this study was to investigate the influence AS has on various radiologic parameters used to detect traumatic and degenerative instability of the cervical spine, to assess if CT imaging in the shock room is diagnostically appropriate in this patient population. METHODS: A matched, case-control retrospective analysis of patients with AS and controls without AS admitted at two level-1 trauma centers was performed. All patients were admitted via shock room and received a polytrauma CT. Twenty-four CT parameters of atlanto-occipital dislocation/instability, traumatic and degenerative spondylolisthesis, basilar invagination, and prevertebral soft tissue swelling were assessed. Since the study was assessing normal values, study patients were included if they had no injury to the cervical spine. Study patients were matched by age and sex. RESULTS: A total of 78 patients were included (AS group, n = 39; control group, n = 39). The evaluated cervical radiologic parameters were largely within normal limits and showed no significant clinical or morphologic differences between the two groups. CONCLUSION: In this analysis, CT measurements pertaining to various cervical pathologies were not different between patients with and without AS. Parameters to assess for atlanto-occipital dislocation/instability, spondylolisthesis, or basilar invagination in the trauma setting may reliably be used in patients with AS.

Prediction of Temperature and Loading History Dependent Lumbar Spine Biomechanics Under Cyclic Loading Using Recurrent Neural Networks.

Extended-duration cyclic loading of the spine is known to be correlated to lower back pain (LBP). Therefore, it is important to understand how the loading history affects the entire structural behavior of the spine, including the viscoelastic effects. Six human spinal segments (L4L5) were loaded with pure moments up to 7.5 Nm cyclically for half an hour, kept unloaded for 15 min, and loaded with three cycles. This procedure was performed in flexion-extension (FE), axial rotation (AR), and lateral bending (LB) and repeated six times per direction for a total of 18 h of testing per segment. A Long Short-Term Memory (LSTM) Recurrent Neural Network (RNN) was trained to predict the change in the biomechanical response under cyclic loading. A strong positive correlation between the total testing time and the ratio of the third cycle to the last cycle of the loading sequence was found (BT: [Formula: see text] =  0.3469, p = 0.0003, RT: [Formula: see text] =0.1988, p  =   0.0377). The moment-range of motion (RoM) curves could be very well predicted with an RNN ([Formula: see text]=0.988), including the correlation between testing time and testing temperature as inputs. This study shows successfully the feasibility of using RNNs to predict changing moment-RoM curves under cyclic moment loading.

SULFORAPHANE ADMINISTRATION AFTER HEMORRHAGIC SHOCK/RESUSCITATION IN MICE REDUCES THE SECRETION OF INFLAMMATORY CYTOKINES AND INCREASES THE IMMUNOCOMPETENCE OF SPLENIC MACROPHAGES.

ABSTRACT: Objective : The purpose of this study was to investigate the immunomodulatory effects of sulforaphane (SFN), a nuclear factor erythroid 2-related factor (Nrf2) pathway activator, on splenic macrophages' immunocompetence after hemorrhagic shock/resuscitation (HS/R). Methods : Male C57/BL6 wild-type mice (n = 6 per group) were subjected to either pressure-controlled HS (MAP, 35-45 mm Hg) or a sham procedure surgery (without HS). After 90 minutes of HS, fluid resuscitation with withdrawn blood and 0.9% NaCl was performed. Sulforaphane (50 mg/kg of body weight) was applied intraperitoneally immediately after the resuscitation phase as well as 24 and 48 h thereafter, depending on group allocation. The mice were killed at 6, 24, and 72 h after resuscitation. After killing, spleens were harvested to perform Nrf2 immunofluorescence histology. Splenic macrophages were isolated and cultured to measure cytokine secretion in the cell culture supernatant. Furthermore, macrophages isolated after 24-hour resuscitation were treated with 100 ng/mL of bacterial LPS to measure immunocompetence. Matrix-assisted laser desorption/ionization mass spectrometry imaging was performed to verify the distribution of SFN in the spleen after intraperitoneal injection. Results : We showed that administered SFN reached the spleen within the first hour after administration. Furthermore, we identified that SFN increased splenic Nrf2 activation and decreased cytokine expression in splenic macrophages after HS/R. In addition, we showed that SFN exhibited splenic anti-inflammatory properties of macrophages in vitro (IL-6/IL-10-ratio of the HS/R group: 51.79 ± 9.99 [at 6 h] and 15.70 ± 3.35 [at 24 h] vs. HS/R + SFN group: 20.54 ± 5.35 [at 6 h] and 8.60 ± 2.37 [at 24 h], P < 0.05). Furthermore, SFN improved in vitro splenic macrophage immunocompetence after HS/R, as evidenced by the increased secretion of inflammatory cytokines in response to LPS stimulation in vitro . Conclusions : Our study shows that SFN can reduce inflammatory cytokines secreted by splenic macrophages after HS/R and increase their immunocompetence toward a more anti-inflammatory profile.

Open Posterior Reduction and Stabilization of AO Spine C3 Sacral Fractures.

AO Spine C3 sacral fractures are defined by separation of the spine including S1 from the pelvic ring and are usually result of a high-energy injury. Besides their high biomechanical instability and high rate of associated neurological impairment, these fractures are often extremely difficult to reduce due to severe bony impaction and dislocation. Additional difficulties in management of these fractures arise from only a thin-layer of soft-tissue coverage overlying the injured area.

Complications associated using the reamer-irrigator -aspirator (RIA) system: a systematic review and meta-analysis.

INTRODUCTION: Complications associated with the application of the Reamer-irrigator-Aspirator (RIA) system are described in the literature. However, to date a systematic review and meta-analysis to assess prevalence of complications associated with the use of the RIA system have not been conducted. MATERIALS AND METHODS: The review is registered with PROSPERO (CRD42021269982). MEDLINE, the Web of Science Core Collection, and Embase were searched from the inception to 10 August 2021. The primary objective was to assess complications and blood loss associated with the use of the RIA system. RESULTS: Forty-seven studies involving 1834 procedures performed with the RIA system were finally included. A total of 105 complications were reported, with a pooled estimated overall prevalence of 1.7% with a 95% confidence interval (CI) of 0.40 to 3.60, with cortex perforation being the largest reported complication with a total of 34 incidences. A significant subgroup difference was observed (p = 0.02). In subgroup 1 (bone graft harvesting), complication prevalence was 1.4% (95% CI 0.2-3.4); in subgroup 2 (clearance intramedullary canal) it was 0.7% (95% CI 0.00-6.30) and in subgroup 3 (reaming with RIA system prior to nail fixation) 11.9% (95% CI 1.80-26.40). No statistically significant difference for tibia and femur as RIA system application site was observed (CI 0.69-4.19). In studies reporting blood loss, a mean volume of 803.29 ml, a mean drop of hemoglobin of 3.74 g/dl and a necessity of blood transfusion in 9.72% of the patients were observed. CONCLUSIONS: The systematic review and meta-analysis demonstrate a low overall prevalence rate of complications associated with the RIA system. However, especially the risk of cortical perforation and the frequently reported relevant intraoperative blood loss are complications that should be anticipated in perioperative management and ultimately considered when using the RIA system.

Transosseous suture versus suture anchor fixation for inferior pole fractures of the patella in osteoporotic bone: a biomechanical study.

BACKGROUND: The surgical treatment of inferior patellar pole fractures can be a challenge, especially in geriatric patients, who are particularly frequently affected by osteoporosis. The objective of this biomechanical study was to compare the performance of suture anchor and transosseous suture fixation in fractures of the inferior patellar pole in context of bone mineral density. METHODS: Twelve fresh-frozen human cadaveric knees received a transverse osteotomy, simulating an AO/OTA 34C1.3 inferior pole fracture of the patella. These fractures were fixated with either suture anchors (SA; Corkscrew® FT 4.5 mm) or transosseous suture (TS; #2 FiberWire®). Cyclic loading tests were performed by pulling the quadriceps tendon against gravity from 90° flexion to almost full extension (5°) for 1000 cycles. Motion and fracture gap displacement were tracked until failure occurred. Subsequently, loading to failure tests followed. Differences between groups were compared using unpaired t-tests, and correlations were calculated with Pearson's correlation coefficient. RESULTS: The suture anchor group showed significantly fewer cycles to failure than the transosseous suture group (SA: 539.0 ± 465.6 cycles, TS: 1000 ± 0 cycles, P = 0.04). Bone mineral density correlated positively with cycles to failure in the suture anchor group (Pearson's r = 0.60, P = 0.02). No differences in fracture gap displacement could be proven after 100 cycles (SA: 4.1 ± 2.6 mm, TS: 6.5 ± 2.6 mm, P = 0.19); 500 cycles (SA: 6.4 ± 6.1 mm, TS: 9.6 ± 3.8 mm, P = 0.39); and 1000 cycles (SA: 4.0 ± 0.4 mm, TS: 11.0 ± 4.5 mm, P = 0.08). Furthermore, the mean destructive load to failure in the suture anchor group was also significantly lower than in the transosseous suture group (SA: 422.4 ± 212.2 N, TS: 825.7 ± 189.3 N, P = 0.04). CONCLUSIONS: Suture anchors may be a viable alternative to transosseous suture in younger patients for clinical advantages, but in osteoporotic bone, the more stable osteosynthesis with transosseous suture continues to prove superior. Therefore, trauma surgeons might consider the use of transosseous suture in elderly patients, especially in those presenting with low bone mineral density values.

L4/5 accessibility for extreme lateral interbody fusion (XLIF): a radiological study.

INTRODUCTION: Potential advantages of the Extreme Lateral Interbody Fusion (XLIF) approach are smaller incisions, preserving anterior and posterior longitudinal ligaments, lower blood loss, shorter operative time, avoiding vascular and visceral complications, and shorter length of stay. We hypothesize that not every patient can be safely treated at the L4/5 level using the XLIF approach. The objective of this study was to radiographically (CT-scan) evaluate the accessibility of the L4/5 level using a lateral approach, considering defined safe working zones and taking into account the anatomy of the superior iliac crest. METHODS: Hundred CT examinations of 34 female and 66 male patients were retrospectively evaluated. Disc height, lower vertebral endplate (sagittal and transversal), and psoas muscle diameter were quantified. Accessibility to intervertebral space L4/5 was investigated by simulating instrumentation in the transverse and sagittal planes using defined safe zones. RESULTS: The endplate L5 in the frontal plane considering defined safe zones in the sagittal and transverse plane (Zone IV) could be reached in 85 patients from the right and in 83 from the left side. Through psoas split, the safe zone could be reached through psoas zone II in 82 patients from the right and 91 patients from the left side. Access through psoas zone III could be performed in 28 patients from the right and 32 patients from the left side. Safe access and sufficient instrumentation of L4/5 through an extreme lateral approach could be performed in 76 patients of patients from the right and 70 patients from the left side. CONCLUSION: XLIF is not possible and safe in every patient at the L4/5 level. The angle of access for instrumentation, access of the intervertebral disc space, and accessibility of the safe zone should be taken into account. Preoperative imaging planning is important to identify patients who are not suitable for this procedure.

An experimental-numerical method for the calibration of finite element models of the lumbar spine.

We present a systematic and automated stepwise method to calibrate computational models of the spine. For that purpose, a sequential resection study on one lumbar specimen (L2-L5) was performed to obtain the individual contribution of the IVD, the facet joints and the ligaments to the kinematics of the spine. The experimental data was prepared for the calibration procedure in such manner that the FE model could reproduce the average motion of the 10 native spines from former cadaveric studies as well as replicate the proportional change in ROM after removal of a spinal structure obtained in this resection study. A Genetic Algorithm was developed to calibrate the properties of the intervertebral discs and facet joints. The calibration of each ligament was performed by a simple and novel technique that requires only one simulation to obtain its mechanical property. After calibration, the model was capable of reproducing the experimental results in all loading directions and resections.

Biodegradable interbody cages for lumbar spine fusion: Current concepts and future directions.

Lumbar fusion often remains the last treatment option for various acute and chronic spinal conditions, including infectious and degenerative diseases. Placement of a cage in the intervertebral space has become a routine clinical treatment for spinal fusion surgery to provide sufficient biomechanical stability, which is required to achieve bony ingrowth of the implant. Routinely used cages for clinical application are made of titanium (Ti) or polyetheretherketone (PEEK). Ti has been used since the 1980s; however, its shortcomings, such as impaired radiographical opacity and higher elastic modulus compared to bone, have led to the development of PEEK cages, which are associated with reduced stress shielding as well as no radiographical artefacts. Since PEEK is bioinert, its osteointegration capacity is limited, which in turn enhances fibrotic tissue formation and peri-implant infections. To address shortcomings of both of these biomaterials, interdisciplinary teams have developed biodegradable cages. Rooted in promising preclinical large animal studies, a hollow cylindrical cage (Hydrosorb™) made of 70:30 poly-l-lactide-co-d, l-lactide acid (PLDLLA) was clinically studied. However, reduced bony integration and unfavourable long-term clinical outcomes prohibited its routine clinical application. More recently, scaffold-guided bone regeneration (SGBR) with application of highly porous biodegradable constructs is emerging. Advancements in additive manufacturing technology now allow the cage designs that match requirements, such as stiffness of surrounding tissues, while providing long-term biomechanical stability. A favourable clinical outcome has been observed in the treatment of various bone defects, particularly for 3D-printed composite scaffolds made of medical-grade polycaprolactone (mPCL) in combination with a ceramic filler material. Therefore, advanced cage design made of mPCL and ceramic may also carry initial high spinal forces up to the time of bony fusion and subsequently resorb without clinical side effects. Furthermore, surface modification of implants is an effective approach to simultaneously reduce microbial infection and improve tissue integration. We present a design concept for a scaffold surface which result in osteoconductive and antimicrobial properties that have the potential to achieve higher rates of fusion and less clinical complications. In this review, we explore the preclinical and clinical studies which used bioresorbable cages. Furthermore, we critically discuss the need for a cutting-edge research program that includes comprehensive preclinical in vitro and in vivo studies to enable successful translation from bench to bedside. We develop such a conceptual framework by examining the state-of-the-art literature and posing the questions that will guide this field in the coming years.

Patient-specific risk factors for adverse outcomes following geriatric proximal femur fractures.

BACKGROUND: Proximal femur fractures (PFFs) occur frequently among geriatric patients due to diverse risk factors, such as a lower bone mineral density and the increased risk of falls. METHODS: In this review, we focus on recent literature of patient-specific risk factors and their impact on common complications and outcome parameters in patients with PFF. RESULTS: Patient- and treatment related factors have a significant impact on outcome and are associated with an increased risk of mortality, impairments in functional rehabilitation and complicative courses. CONCLUSION: Geriatric patients at high risk for complications are nursing home inhabitants suffering from severe osteoporosis, dementia and sarcopenia. The early and ongoing assessment for these individual risk factors is crucial. Strategies including interdisciplinary approaches, addressing comorbidities and facilitating an optimal risk factor evaluation result in a beneficial outcome. The ongoing ambulant assessment and therapy of complicating factors (e.g., malnutrition, sarcopenia, frailty or osteoporosis) have to be improved.

Sulforaphane Exerts Beneficial Immunomodulatory Effects on Liver Tissue via a Nrf2 Pathway-Related Mechanism in a Murine Model of Hemorrhagic Shock and Resuscitation.

Our research explores the immunomodulatory effects of sulforaphane (SFN), a well-known nuclear factor erythroid 2-related factor 2 (Nrf2) pathway agonist, on the sterile inflammation of and ischemia-reperfusion injuries to the liver after hemorrhagic shock (HS) followed by resuscitation (R). Male C57/BL6 wild-type and transgenic ARE-luc mice were exposed to mean arterial pressure-controlled HS. Fluid resuscitation was performed after 90 min of HS, and SFN was administrated intraperitoneally after that. The animals were sacrificed at 6 h, 24 h, and 72 h after resuscitation, and their livers were extracted to perform H&E staining and myeloperoxidase (MPO) activity analysis. The Kupffer cells were isolated for cytokines profile measurements and Nrf2 immunofluorescence staining. Further, the ARE-luc mice were used to assess hepatic Nrf2 activity in vivo. We identified that SFN-activated Kupffer cells' Nrf2 pathway and modulated its cytokines expression, including TNF-α, MCP-1, KC/CXCL1, IL-6, and IL-10. Furthermore, SFN mitigated liver ischemia-reperfusion injury, as evidenced by the downregulation of the Suzuki score and the enhanced hepatic Nrf2 activity. The in vivo SFN treatment decreased neutrophils infiltration, as shown by the decreased MPO levels. Our study shows that SFN can decrease HS/R-induced hepatic ischemia-reperfusion injury and modulate the activity of Kupffer cells via an Nrf2-dependent pathway.

mTICCS and its inter-rater reliability to predict the need for massive transfusion in severely injured patients.

PURPOSE: The modified Trauma-Induced Coagulopathy Clinical Score (mTICCS) presents a new scoring system for the early detection of the need for a massive transfusion (MT). This easily applicable score was validated in a large trauma cohort and proven comparable to more established complex scoring systems. However, the inter-rater reliability of the mTICCS has not yet been investigated. METHODS: Therefore, a dataset of 15 randomly selected and severely injured patients (ISS ≥ 16) derived from the database of a level I trauma centre (2010-2015) was used. Moreover, 15 severely injured subjects that received MT were chosen from the same databank. A web-based survey was sent to medical professionals working in the field of trauma care asking them to evaluate each patient using the mTICCS. RESULTS: In total, 16 raters (9 residents and 7 specialists) completed the survey. Ratings from 15 medical professionals could be evaluated and led to an ICC of 0.7587 (95% Bootstrap confidence interval (BCI) 0.7149-0.8283). A comparison of working experience specific ICC (n = 7 specialists, ICC: 0.7558, BCI: 0.7076-0.8270; n = 8 residents, ICC: 0.7634, BCI: 0.7183-0.8335) showed no significant difference between the two groups (p = 0.67). CONCLUSION: In summary, reliability values need to be considered when making clinical decisions based on scoring systems. Due to its easy applicability and its almost perfect inter-rater reliability, even with non-specialists, the mTICCS might therefore be a useful tool to predict the early need for MT in multiple trauma.