Volatile anesthetic gas concentration sensing using flow sensor fusion for use in Austere settings.

Flow sensors are often sensitive to the presence of volatile anesthetics. However, this sensitivity provides a unique opportunity to combine flow sensors of differing technological principles as an alternative to measuring volatile anesthetic gas concentration, particularly for austere settings. To determine the feasibility of flow sensor fusion for volatile anesthetic concentrations monitoring, eight flow sensors were tested with isoflurane, sevoflurane, and desflurane, ranging in concentrations from 0-4.5%, 0-3.5%, and 0-18%, respectively. Pairs of flow sensors were fit to the volatile anesthetic gas concentration with a leave-one-out cross-validation method to reduce the likelihood of overfitting. Bland-Altman was used for the final evaluation of sensor pair performance. Several sensor pairs yielded limits of agreement comparable to the rated accuracy of a commercial infrared spectrometer. The ultrasonic and orifice-plate flowmeters yielded the most combinations of viable sensor pairs for all three volatile anesthetic gases. Conclusion: Measuring volatile anesthetic gases using flow sensor fusion is a feasible low-cost, low-maintenance alternative to infrared spectroscopy. In this study, testing was done under steady-state conditions in 100% oxygen. Further testing is necessary to ensure sensor fusion performance under conditions that are more reflective of the clinical use case.

Modified full-face snorkel masks as reusable personal protective equipment for hospital personnel.

Here we adapt and evaluate a full-face snorkel mask for use as personal protective equipment (PPE) for health care workers, who lack appropriate alternatives during the COVID-19 crisis in the spring of 2020. The design (referred to as Pneumask) consists of a custom snorkel-specific adapter that couples the snorkel-port of the mask to a rated filter (either a medical-grade ventilator inline filter or an industrial filter). This design has been tested for the sealing capability of the mask, filter performance, CO2 buildup and clinical usability. These tests found the Pneumask capable of forming a seal that exceeds the standards required for half-face respirators or N95 respirators. Filter testing indicates a range of options with varying performance depending on the quality of filter selected, but with typical filter performance exceeding or comparable to the N95 standard. CO2 buildup was found to be roughly equivalent to levels found in half-face elastomeric respirators in literature. Clinical usability tests indicate sufficient visibility and, while speaking is somewhat muffled, this can be addressed via amplification (Bluetooth voice relay to cell phone speakers through an app) in noisy environments. We present guidance on the assembly, usage (donning and doffing) and decontamination protocols. The benefit of the Pneumask as PPE is that it is reusable for longer periods than typical disposable N95 respirators, as the snorkel mask can withstand rigorous decontamination protocols (that are standard to regular elastomeric respirators). With the dire worldwide shortage of PPE for medical personnel, our conclusions on the performance and efficacy of Pneumask as an N95-alternative technology are cautiously optimistic.

Investigating Capnography Innovation for Better Patient Monitoring in the Resource Limited Surgical Setting.

BACKGROUND: Access to basic anesthetic monitoring in the developing world is lacking, which contributes to the 100 times greater anesthesia-related mortality in low- and middle-income countries. We hypothesize that an environmental sensor with a lower sampling rate could provide some clinical utility by providing CO2 levels, respiratory rate, and support in detection of clinical abnormalities. MATERIALS AND METHODS: A bench-top lung simulation was created to replicate CO2 waveforms, and an environmental sensor was compared with industry-available technology. Sensor response time and respiratory rates were compared between devices. Additionally, an in silico model was created to replicate capnography pathology as waveforms would appear using the environmental sensor. RESULTS AND CONCLUSION: Breath simulations using the bench-top lung simulation produced similar results to industry standards with a degree of variability. Respiratory rates did not differ between the environmental sensor and all other devices tested. Finally, pathological waveforms created in silico carried a certain level of detail regarding ventilatory pathology, which could provide some clinical insight to an anesthesiologist. We believe our prototype is the first step toward making low-cost and portable capnography available in the resource-limited setting, and future efforts should focus on bridging the gap to safer anesthesia and surgery globally.

Reversible assembly of tunable nanoporous materials from "hairy" silica nanoparticles.

Membranes with 1-100 nm nanopores are widely used in water purification and in biotechnology, but are prone to blockage and fouling. Reversibly assembled nanoporous membranes may be advantageous due to recyclability, cleaning, and retentate recovery, as well as the ability to tune the pore size. We report the preparation and characterization of size-selective nanoporous membranes with controlled thickness, area, and pore size via reversible assembly of polymer brush-grafted ("hairy") silica nanoparticles. We describe membranes reversibly assembled from silica particles grafted with (1) polymer brushes carrying acidic and basic groups, and (2) polymer brushes carrying neutral groups. The former are stable in most organic solvents and easily disassemble in water, whereas the latter are water-stable and disassemble in organic solvents.