ABSTRACT
Silica-supported amine absorbents, including materials produced by tethering aminosilanes or infusion of poly(ethyleneimine), represent a promising class of materials for CO2 capture applications, including direct air and point source capture. Various silica surface treatments and functionalization strategies are explored to enhance stability and CO2 uptake in amine-based solid sorbent systems. Here, the synthesis and characterization of novel vinyltrimethoxysilane-treated Santa Barbara Amorphous-15 (SBA-15) supports and the corresponding enhancement in CO2 uptake compared to various SBA-15-based control supports are presented. The relationship between CO2 diffusion and amine efficiency in these systems is explored using a previously reported kinetic model. The synthesized materials are characterized with CO2 and H2O isotherms, diffuse reflectance infrared Fourier transform spectroscopy, 1H T1-T2 relaxation correlation NMR, and rapid thermal cycling experiments. The novel support materials are shown to enable high amine efficiencies, approaching a fourfold improvement over standard SBA-15-supported amines, while simultaneously exhibiting excellent stability when cycled rapidly under humid conditions. As the poly(ethyleneimine) loadings are held constant across the various samples, enhancements in CO2 uptake are attributed to differences in the way the poly(ethyleneimine) interacts with the support surface.
ABSTRACT
Nanoparticles can suppress asymmetric precursor support collapse during pyrolysis to create carbon molecular sieve (CMS) membranes. This advance allows elimination of standard sol-gel support stabilization steps. Here we report a simple but surprisingly important thermal soaking step at 400 °C in the pyrolysis process to obtain high performance CMS membranes. The composite CMS membranes show CO2 /CH4 (50 : 50) mixed gas feed with an attractive CO2 /CH4 selectivity of 134.2 and CO2 permeance of 71â GPU at 35 °C. Furthermore, a H2 /CH4 selectivity of 663 with H2 permeance of 240â GPU was achieved for promising green energy resource-H2 separation processes.
ABSTRACT
The need for energy-efficient recovery of organic solutes from aqueous streams is becoming more urgent as chemical manufacturing transitions toward nonconventional and bio-based feedstocks and processes. In addition to this, many aqueous waste streams contain recalcitrant organic contaminants, such as pharmaceuticals, industrial solvents, and personal care products, that must be removed prior to reuse. We observe that rigid carbon membrane materials can remove and concentrate organic contaminants via an unusual liquid-phase membrane permeation modality. Surprisingly, detailed thermodynamic calculations on the chemical potential of the organic contaminant reveal that the organic species has a higher chemical potential on the permeate side of the membrane than on the feed side of the membrane. This unusual observation challenges conventional membrane transport theory that posits that all permeating species move from high chemical potential states to lower chemical potential states. Based on experimental measurements, we hypothesize that the organic is concentrated in the membrane relative to water via favorable binding interactions between the organic and the carbon membrane. The concentrated organic is then swept through the membrane via the bulk flow of water in a modality known as "sorp-vection." We highlight via simplified nonequilibrium thermodynamic models that this "uphill" chemical potential permeation of the organic does not result in second-law violations and can be deduced via measurements of the organic and water sorption and diffusion rates into the carbon membrane. Moreover, this work identifies the need to consider such nonidealities when incorporating unique, rigid materials for the separations of aqueous waste streams.
ABSTRACT
Carbon molecular sieve (CMS) membranes are attractive candidates to meet requirements for challenging gas separations. The added ability to maintain such intrinsic properties in an asymmetric morphology with a structure that we term a "Pseudo Wheel+Hub & Spoke" asymmetric form offers new opportunities. For CMS membrane, specifically, the structure provides both selective layer support and low flow resistance even for high feed pressures and fluxes in CO2 removal from natural gas. This capability is unavailable to even rigid glassy polymers due to the much higher modulus of CMS materials. Combining precursor asymmetric hollow fiber formation and optimized pyrolysis creates a defect free CMS proof-of-concept membrane for this application. Facile formation of the sheath-core spun precursor with a 6FDA-DAM sheath and Matrimid® core also avoids the need to seal defects before or after the carbonization of the precursors. The composite CMS membrane shows CO2 /CH4 (50 : 50) mixed gas feed with an attractive CO2 /CH4 selectivity of 64.3 and CO2 permeance of 232â GPU at 35 °C. A key additional benefit of the approach is reduction in use of the more costly high performance 6FDA-DAM in a composite sheath-core CMS membrane with the "Pseudo Wheel+Hub & Spoke" structure.
ABSTRACT
Carbon molecular sieve (CMS) membranes with precise molecular discrimination ability and facile scalability are attractive next-generation membranes for large-scale, energy-efficient gas separations. Here, structurally engineered CMS membranes derived from a tailor-made cross-linkable copolyimide with kinked structure are reported. We demonstrate that combining two features, kinked backbones and cross-linkable backbones, to engineer polyimide precursors while controlling pyrolysis conditions allows the creation of CMS membranes with improved gas separation performance. Our results indicate that the CMS membranes provide a versatile platform for a broad spectrum of challenging gas separations. The gas transport properties of the resulting CMS membranes are interpreted in terms of a model reflecting both molecular sieving Langmuir domains and a disordered continuous phase, thereby providing insight into structure evolution from the cross-linkable polyimide precursor to a final CMS membrane. With this understanding of CMS membrane structure and separation performance, these systems are promising for environmentally friendly gas separations.
Subject(s)
Carbon , Engineering , Biological Transport , PyrolysisABSTRACT
Carbon molecular sieve (CMS) membranes offer the best available combination of scalable economical processability with excellent separation performance. Physical aging of CMS membranes causes pore structure changes over time that affect CMS membrane performance. To provide fundamental insights into the structure evolution in CMS membranes during physical aging, a combined dual-mode sorption and transport model is used in this study to characterize the diffusion coefficients of gas molecules in fresh and 7-day vacuum aged CMS membranes. The results show physical aging of CMS membrane is primarily "diffusion related" and such aging behavior simultaneously causes ultramicropore changes in the continuous phase and Langmuir phase of CMS membrane. The new insights offered in this study suggest strategies to control the physical aging of CMS membranes and even use it as a valuable tool to tune the separation performance of CMS membranes for demanding gas separations.
ABSTRACT
We describe a straightforward and scalable fabrication of diamine-appended metal-organic framework (MOF)/polymer composite hollow fiber sorbent modules for CO2 capture from dilute streams, such as flue gas from natural gas combined cycle (NGCC) power plants. A specific Mg-MOF, Mg2(dobpdc) (dobpdc4- = 4,4'-dioxidobiphenyl-3,3'-dicarboxylate), incorporated into poly(ether sulfone) (PES) is directly spun through a conventional "dry-jet, wet-quench" method. After phase separation, a cyclic diamine 2-(aminomethyl)piperidine (2-ampd) is infused into the MOF within the polymer matrix during postspinning solvent exchange. The MOF hollow fibers from direct spinning contain as high as 70% MOF in the total fibers with 98% of the pure MOF uptake. The resulting fibers exhibit a step isotherm and a "shock-wave-shock" breakthrough profile consistent with pure 2-ampd-Mg2(dobpdc). This work demonstrates a practical method for fabricating 2-ampd-Mg2(dobpdc) fiber sorbents that display the MOF's high CO2 adsorption capacity while lowering the pressure drop during operation.
ABSTRACT
Carbon molecular sieve (CMS) membranes have impressive separation properties; however, both chemical and morphology structures need to be understood better. Here we characterize CMS with the simplest polyimide (PI) PMDA/pPDA (PMDA=pyromellitic dianhydride, pPDA=p-phenylenediamine), using FTIR, solid-state 15 N-NMR and 13 C-NMR, XPS, XRD, and Raman spectra to study chemical structure. We also compare gas separation properties for this CMS to a CMS derived from a more conventional PI precursor. The detailed characterization shows the presence of aromatic pyridinic, pyrrolic rings as well as graphitic, pyridonic components and a few other groups in both CMS types derived from the very different precursors. The CMS morphologies, while related to precursor and pyrolysis temperature details, show similarities consistent with a physical picture comprising distributed molecular sieving plate-like structures. These results assist in understanding diverse CMS membrane separation performance.
ABSTRACT
Demand for energy-efficient gas separations exists across many industrial processes, and membranes can aid in meeting this demand. Carbon molecular sieve (CMS) membranes show exceptional separation performance and scalable processing attributes attractive for important, similar-sized gas pairs. Herein, we outline a mathematical and physical framework to understand these attributes. This framework shares features with dual-mode transport theory for glassy polymers; however, physical connections to CMS model parameters differ from glassy polymer cases. We present evidence in CMS membranes for a large volume fraction of microporous domains characterized by Langmuir sorption in local equilibrium with a minority continuous phase described by Henry's law sorption. Using this framework, expressions are provided to relate measurable parameters for sorption and transport in CMS materials. We also outline a mechanism for formation of these environments and suggest future model refinements.
ABSTRACT
Partial substitution of the asymmetric 3,3',4,4'-biphenyl dianhydride monomer (aBPDA) into the backbone of a 6FDA-BPDA-DAM (6FDA=4,4'-hexafluoroisopropylidene, DAM=diaminomesitylene) diphthalic anhydride-based copolyimide based on symmetrical BPDA (sBPDA) was used to study membrane structure-processing-property relationships for gas separation. Properties of the polymer membrane as well as derived carbon molecular sieves (CMS) membranes were compared with copolyimides without the asymmetric monomer structure. CMS membranes derived from the copolyimides are very attractive for CO2 /CH4 separation. aBPDA provides the copolyimide with additional packing-inhibited structures compared with the symmetric ones and yields a corresponding CMS membrane with very high CO2 permeability and good CO2 /CH4 selectivity. This work, therefore, outlines a new strategy for tuning CMS membrane structure to meet separation performance needs.
ABSTRACT
Glassy polyimide membranes are attractive for industrial applications in sour natural gas purification. Unfortunately, the lack of fundamental understanding of relationships between polyimide chemical structures and their gas transport properties in the presence of H2 S constrains the design and engineering of advanced membranes for such challenging applications. Herein, 6FDA-based polyimide membranes with engineered structures were synthesized to tune their CO2 /CH4 and H2 S/CH4 separation performances and plasticization properties. Under ternary mixed sour gas feeds, controlling polymer chain packing and plasticization tendency of such polyimide membranes via tuning the chemical structures were found to offer better combined H2 S and CO2 removal efficiency compared to conventional polymers. Fundamental insights into structure-property relationships of 6FDA-based polyimide membranes observed in this study offer guidance for next generation membranes for sour natural gas separation.
ABSTRACT
Dip coating and pyrolysis processes are used to create multi-layer asymmetric carbon molecular sieve (CMS) hollow fiber membranes with excellent gas separation properties. Coating of an economical engineered support with a high-performance polyimide to create precursor fibers with a dense skin layer reduces material cost by 25-fold compared to monolithic precursors or ceramic supports. CMS permeation results with CO2 /CH4 (50:50) mixed gas feed show attractive CO2 /CH4 selectivity of 58.8 and CO2 permeance of 310 GPU at 35 °C.
ABSTRACT
This study reports 6FDA:BPDA-DAM polyimide-derived hollow fiber carbon molecular-sieve (CMS) membranes for hydrogen and ethylene separation. Since H2 /C2 H4 selectivity is the lowest among H2 /(C1 -C3 ) hydrocarbons, an optimized CMS fiber for this gas pair is useful for removing hydrogen from all-cracked gas mixtures. A process we term hyperaging provides highly selective CMS fiber membranes by tuning CMS ultramicropores to favor H2 over larger molecules to give a H2 /C2 H4 selectivity of over 250. Hyperaging conditions and a hyperaging mechanism are discussed in terms of an expedited physical aging process, which is largely controlled by the hyperaging temperature. For the specific CMS material considered here, a hyperaging temperature beyond 90 °C but less than 250 °C works best. Hyperaging also stabilizes CMS materials against physical aging and stabilizes the performance of H2 separation over extended periods. This work opens a door in the development of CMS materials for the separation of small molecules from large molecules.
ABSTRACT
Membrane-based separation of combined acid gases carbon dioxide and hydrogen sulfide from natural gas streams has attracted increasing academic and commercial interest. These feeds are referred to as "sour," and herein, we report an ultra H2S-selective and exceptionally permeable glassy amidoxime-functionalized polymer of intrinsic microporosity for membrane-based separation. A ternary feed mixture (with 20% H2S:20% CO2:60% CH4) was used to demonstrate that a glassy amidoxime-functionalized membrane provides unprecedented separation performance under challenging feed pressures up to 77 bar. These membranes show extraordinary H2S/CH4 selectivity up to 75 with ultrahigh H2S permeability >4000 Barrers, two to three orders of magnitude higher than commercially available glassy polymeric membranes. We demonstrate that the postsynthesis functionalization of hyper-rigid polymers with appropriate functional polar groups provides a unique design strategy for achieving ultraselective and highly permeable membrane materials for practical natural gas sweetening and additional challenging gas pair separations.
ABSTRACT
In the version of this Article originally published, the units of the y axis of Fig. 3b were incorrectly given as '106 cm2 s-1'; they should have been '10-8 cm2 s-1'. This has been corrected in the online versions of the Article.
ABSTRACT
Membrane-based gas separations are energy efficient processes; however, major challenges remain to develop high-performance membranes enabling the replacement of conventional separation processes. Herein, a new fluorinated MOF-based mixed-matrix membrane is reported, which is formed by incorporating the MOF crystals into selected polymers via a facile mixed-matrix approach. By finely controlling the molecular transport in the channels through the MOF apertures tuned by metal pillars and at the MOF-polymer interfaces, the resulting fluorinated MOF-based membranes exhibit excellent molecular sieving properties. These materials significantly outperform state-of-the-art membranes for simultaneous removal of H2 S and CO2 from natural gas-a challenging and economically important application. The robust fluorinated MOFs (NbOFFIVE-1-Ni, AlFFIVE-1-Ni), pave a way to efficient membrane separation processes that require precise discrimination of closely sized molecules.
ABSTRACT
Membrane-based separations can improve energy efficiency and reduce the environmental impacts associated with traditional approaches. Nevertheless, many challenges must be overcome to design membranes that can replace conventional gas separation processes. Here, we report on the incorporation of engineered submicrometre-sized metal-organic framework (MOF) crystals into polymers to form hybrid materials that successfully translate the excellent molecular sieving properties of face-centred cubic (fcu)-MOFs into the resultant membranes. We demonstrate, simultaneously, exceptionally enhanced separation performance in hybrid membranes for two challenging and economically important applications: the removal of CO2 and H2S from natural gas and the separation of butane isomers. Notably, the membrane molecular sieving properties demonstrate that the deliberately regulated and contracted MOF pore-aperture size can discriminate between molecular pairs. The improved performance results from precise control of the linkers delimiting the triangular window, which is the sole entrance to the fcu-MOF pore. This rational-design hybrid approach provides a general toolbox for enhancing the transport properties of advanced membranes bearing molecular sieve fillers with sub-nanometre-sized pore-apertures.
ABSTRACT
Membrane-based separations can reduce the energy consumption and the CO2 footprint of large-scale fluid separations, which are traditionally practiced by energy-intensive thermally driven processes. Here, a new type of membrane structure based on nanoporous carbon is reported, which, according to this study, is best referred to as carbon/carbon mixed-matrix (CCMM) membranes. The CCMM membranes are formed by high-temperature (up to 900 °C) pyrolysis of polyimide precursor hollow-fiber membranes. Unprecedentedly high permselectivities are seen in CCMM membranes for CO2 /CH4 , N2 /CH4 , He/CH4 , and H2 /CH4 separations. Analysis of permeation data suggests that the ultrahigh selectivities result from substantially increased sorption selectivities, which is hypothetically owing to the formation of ultraselective micropores that selectively exclude the bulkier CH4 molecules. With tunable sorption selectivities, the CCMM membranes outperform flexible polymer membranes and traditional rigid molecular-sieve membranes. The capability to increase sorption selectivities is a powerful tool to leverage diffusion selectivities, and has opened the door to many challenging and economically important fluid separations that require ultrafine differentiation of closely sized molecules.