Biphenyl scaffold for the design of NMDA-receptor negative modulators: molecular modeling, synthesis, and biological activity.

NMDA (N-methyl-d-aspartate) receptor antagonists are promising tools for the treatment of a wide variety of central nervous system impairments including major depressive disorder. We present here the activity optimization process of a biphenyl-based NMDA negative allosteric modulator (NAM) guided by free energy calculations, which led to a 100 times activity improvement (IC50 = 50 nM) compared to a hit compound identified in virtual screening. Preliminary calculation results suggest a low affinity for the human ether-a-go-go-related gene ion channel (hERG), a high affinity for which was earlier one of the main obstacles for the development of first-generation NMDA-receptor negative allosteric modulators. The docking study and the molecular dynamics calculations suggest a completely different binding mode (ifenprodil-like) compared to another biaryl-based NMDA NAM EVT-101.

Genetic diversity of SAD and FAD genes responsible for the fatty acid composition in flax cultivars and lines.

BACKGROUND: Flax (Linum usitatissimum L.) is grown for fiber and seed in many countries. Flax cultivars differ in the oil composition and, depending on the ratio of fatty acids, are used in pharmaceutical, food, or paint industries. It is known that genes of SAD (stearoyl-ACP desaturase) and FAD (fatty acid desaturase) families play a key role in the synthesis of fatty acids, and some alleles of these genes are associated with a certain composition of flax oil. However, data on genetic polymorphism of these genes are still insufficient. RESULTS: On the basis of the collection of the Institute for Flax (Torzhok, Russia), we formed a representative set of 84 cultivars and lines reflecting the diversity of fatty acid composition of flax oil. An approach for the determination of full-length sequences of SAD1, SAD2, FAD2A, FAD2B, FAD3A, and FAD3B genes using the Illumina platform was developed and deep sequencing of the 6 genes in 84 flax samples was performed on MiSeq. The obtained high coverage (about 400x on average) enabled accurate assessment of polymorphisms in SAD1, SAD2, FAD2A, FAD2B, FAD3A, and FAD3B genes and evaluation of cultivar/line heterogeneity. The highest level of genetic diversity was observed for FAD3A and FAD3B genes - 91 and 62 polymorphisms respectively. Correlation analysis revealed associations between particular variants in SAD and FAD genes and predominantly those fatty acids whose conversion they catalyze: SAD - stearic and oleic acids, FAD2 - oleic and linoleic acids, FAD3 - linoleic and linolenic acids. All except one low-linolenic flax cultivars/lines contained both the substitution of tryptophan to stop codon in the FAD3A gene and histidine to tyrosine substitution in the FAD3B gene, while samples with only one of these polymorphisms had medium content of linolenic acid and cultivars/lines without them were high-linolenic. CONCLUSIONS: Genetic polymorphism of SAD and FAD genes was evaluated in the collection of flax cultivars and lines with diverse oil composition, and associations between particular polymorphisms and the ratio of fatty acids were revealed. The achieved results are the basis for the development of marker-assisted selection and DNA-based certification of flax cultivars.

Influence of solvent on the yield and chemical composition of liquid products of hydrothermal liquefaction of Arthrospira platensis as revealed by Fourier transform ion cyclotron resonance mass spectrometry.

Yields of liquid products (bio-oil and residual organics in aqueous solution) of hydrothermal liquefaction (at 300℃ and 60 min) of own cultivated Arthrospira platensis using different solvents have been determined. Nonpolar hexane, moderately polar dichloromethane, and relatively more polar acetonitrile have been used. High-resolution mass spectrometry based on linear quadrupole ion trap and Fourier transform mass spectrometer (LTQ FT) has been used for liquid sample characterization. Concentration of bio-oil in a unit of solvent volume after solvent extraction took the following arrangement: acetonitrile > dichloromethane > hexane. Concentration of residual organics in a unit of aqueous solution after solvent extraction took the following arrangement: hexane >dichloromethane > acetonitrile. Yield of total organics was arranged as follows: hexane > dichloromethane > acetonitrile. Content of carbon in bio-oil was increased and the content of oxygen was decreased with the increasing of solvent polarity. From mass spectrometric analysis it was established that in the positive electrospray ionization (ESI) mode the compounds containing two nitrogen atoms dominate and the considerable portion of the compounds containing single nitrogen atom are also presented for both bio-oil and residual organics samples. In the negative ESI mode the compounds containing four oxygen atoms dominated except bio-oil obtained using hexane where the compounds containing two oxygen atoms dominated. Bio-oil fraction had highly saturated compounds with low double bond equivalent values while the compounds of the residual organics fraction had large double bond equivalent values.

i-Clamp phenoxazine for the fine tuning of DNA i-motif stability.

Non-canonical DNA structures are widely used for regulation of gene expression, in DNA nanotechnology and for the development of new DNA-based sensors. I-motifs (iMs) are two intercalated parallel duplexes that are held together by hemiprotonated C-C base pairs. Previously, iMs were used as an accurate sensor for intracellular pH measurements. However, iM stability is moderate, which in turn limits its in vivo applications. Here, we report the rational design of a new substituted phenoxazine 2'-deoxynucleotide (i-clamp) for iM stabilization. This residue contains a C8-aminopropyl tether that interacts with the phosphate group within the neighboring chain without compromising base pairing. We studied the influence of i-clamp on pH-dependent stability for intra- and intermolecular iM structures and found the optimal positions for modification. Two i-clamps on opposite strands provide thermal stabilization up to 10-11°C at a pH of 5.8. Thus, we developed a new modification that shows significant iM-stabilizing effect both at strongly and mildly acidic pH and increases iM transition pH values. i-Clamp can be used for tuning iM-based pH probes or assembling extra stable iM structures for various applications.

Synthesis of oligonucleotides containing novel G-clamp analogue with C8-tethered group in phenoxazine ring: Implication to qPCR detection of the low-copy Kemerovo virus dsRNA.

Nowadays modified oligonucleotides are widely used in diagnostics and as novel therapeutics. Introduction of modified or unnatural residues into oligonucleotides allows fine tuning of their binding properties to complementary nucleic acids and leads to improved stability both in vitro and in vivo. Previously it was demonstrated that insertion of phenoxazine nucleotides with various groups in C9-position into oligonucleotides leads to a significant increase of duplex stability with complementary DNA and RNA. Here the synthesis of a novel G-clamp nucleoside analogue (G8AE-clamp) bearing 2-aminoethyl tether at C8-atom is presented. Introduction of such modified residues into oligonucleotides lead to enhanced specificity of duplex formation towards complementary DNA and RNA targets with increased thermal and 3'-exonuclease stability. According to CD-spectroscopy studies G8AE-clamp does not substantially disrupt helix geometry. Primers containing G8AE-clamp demonstrated superior sensitivity in qPCR detection of dsRNA of Kemerovo virus in comparison to native oligonucleotides.

Atmospheric pressure thermal ionization ion source for peptide analysis.

A novel atmospheric pressure thermal ionization (APTI) ion source was developed for the analysis of liquid samples. The feasibility of the ion source was demonstrated on peptides using two configurations-assisted by hot wire or hot surface. Microalloyed molybdenum, used as a thermal ion- emitter, notably facilitated the formation of multiply-charged ions, but fragmentation products were still observed. Peptide fragmentation accompanying thermal ionization can be used for peptide identification. The described method is promising for studies of biological samples with minimal pre-treatment.

Investigation of urine proteome of preterm newborns with respiratory pathologies.

A serious problem during intensive care and nursing of premature infants is the invasiveness of many examination methods. Urine is an excellent source of potential biomarkers due to the safety of the collection procedure. The purpose of this study was to determine the features specific for the urine proteome of preterm newborns and their changes under respiratory pathologies of infectious and non-infectious origin. The urine proteome of 37 preterm neonates with respiratory diseases and 10 full-term newborns as a control group were investigated using the LC-MS/MS method. The total number of identified proteins and unique peptides was 813 and 3672 respectively. In order to further specify the defined infant-specific dataset these proteins were compared with urine proteome of healthy adults (11 men and 11 pregnant women) resulting in 94 proteins found only in infants. Pairwise analysis performed for label-free proteomic data revealed 36 proteins which reliably distinguished newborns with respiratory disorders of infectious genesis from those with non-infectious pathologies, including: proteins involved in cell adhesion (CDH-2,-5,-11, NCAM1, TRY1, DSG2), metabolism (LAMP1, AGRN, TPP1, GPX3, APOD, CUBN, IDH1), regulation of enzymatic activity (SERPINA4, VASN, GAPDH), inflammatory and stress response (CD55, CD 93, NGAL, HP, TNFR, LCN2, AGT, S100P, SERPINA1/C1/B1/F1).

Fourier transform ion cyclotron resonance (FT ICR) mass spectrometry: Theory and simulations.

Fourier transform ion cyclotron resonance (FT ICR) mass spectrometer offers highest resolving power and mass accuracy among all types of mass spectrometers. Its unique analytical characteristics made FT ICR important tool for proteomics, metabolomics, petroleomics, and investigation of complex mixtures. Signal acquisition in FT ICR MS takes long time (up to minutes). During this time ion-ion interaction considerably affects ion motion and result in decreasing of the resolving power. Understanding of those effects required complicated theory and supercomputer simulations but culminated in the invention of the ion trap with dynamic harmonization which demonstrated the highest resolving power ever achieved. In this review we summarize latest achievements in theory and simulation of FT ICR mass spectrometers.

Synthesis of model humic substances: a mechanistic study using controllable H/D exchange and Fourier transform ion cyclotron resonance mass spectrometry.

The products of the oxidative coupling of phenols are frequently used as synthetic analogues to natural humic substances (HS) for biomedical research. However, their molecular compositions and exact structures remain largely unknown. The objective of this study was to develop a novel approach for the molecular-level analysis of phenolic polymerisates that is capable of inventorying molecular constituents and resolving their distinct structural formulas. For this purpose, we have synthesized the model HS using the oxidative coupling of a specifically designed phenylpropanoic monomer, 3-(4-hydroxy-3-methoxyphenyl)-3-oxopropionic acid, to hydroquinone. We have characterized the synthesized model HS using high resolution Fourier transform ion cyclotron resonance mass spectrometry (FTICR MS), (1)H NMR spectroscopy, and controllable hydrogen/deuterium (H/D) exchange. We succeeded in the molecular inventory of the model HS. The assigned molecular formulas occupied the substantial space of CHO compositions in the Van Krevelen diagram with a maximum density found in the regions of tannins and lignins, resembling those of natural HS. To identify the exact structural formulas of the individual constituents in the model HS, we have applied selective H/D exchange of non-labile backbone protons by a choice of basic or acidic catalytic conditions followed by FTICR MS. The determined formulas allowed us to verify the proposed pathways of hydroxylation and carboxylation in the course of the phenolic coupling and to identify the acetylation of aromatic rings as an important side reaction. We conclude that the proposed analytical approach may be used to identify the molecular carriers of biological activity within the phenolic polymerisates and eventually within natural HS.

Molecular mapping of sorbent selectivities with respect to isolation of Arctic dissolved organic matter as measured by Fourier transform mass spectrometry.

The objectives of this study were to identify molecular features characteristic to arctic DOM from the Kolyma River basin and to elucidate structural imprints induced by a choice of the sorption technique. To achieve this goal, DOM was isolated from the Kolyma River basin with a use of three nonionic sorbents: Amberlite XAD-8 resin, PPL- and C18 - SPE cartridges, and one anion exchanging resin-diethylaminoethyl (DEAE) -cellulose. The structural studies were conducted with a use of electrospray ionization Fourier Transform Ion Cyclotron Resonance (ESI FT-ICR) mass spectrometry and liquid state (1)H NMR spectroscopy. The DOM isolates obtained with a use of PPL and C18 cartridges were characterized with higher content of aliphatic compounds as compared to XAD-8 and DEAE-isolates. In total, for all arctic DOM isolates we observed predominance of hydrogen saturated compounds with high H/C values of identified formulas from FT-ICR MS data. (1)H NMR spectroscopy studies have confirmed this trend and revealed high contribution of alkyl-chain protons into the spectral density of the arctic DOM reaching 43% for PPL isolates.

Twelve million resolving power on 4.7 T Fourier transform ion cyclotron resonance instrument with dynamically harmonized cell--observation of fine structure in peptide mass spectra.

Resolving power of about 12,000 000 at m/z 675 has been achieved on low field homogeneity 4.7 T magnet using a dynamically harmonized Fourier transform ion cyclotron resonance (FT ICR) cell. Mass spectra of the fine structure of the isotopic distribution of a peptide were obtained and strong discrimination of small intensity peaks was observed in case of resonance excitation of the ions of the whole isotopic cluster to the same cyclotron radius. The absence of some peaks from the mass spectra of the fine structure was explained basing on results of computer simulations showing strong ion cloud interactions, which cause the coalescence of peaks with m/z close to that of the highest magnitude peak. The way to prevent peak discrimination is to excite ion clouds of different m/z to different cyclotron radii, which was demonstrated and investigated both experimentally and by computer simulations.

Dynamically harmonized FT-ICR cell with specially shaped electrodes for compensation of inhomogeneity of the magnetic field. Computer simulations of the electric field and ion motion dynamics.

The recently introduced ion trap for FT-ICR mass spectrometers with dynamic harmonization showed the highest resolving power ever achieved both for ions with moderate masses 500-1000 Da (peptides) as well as ions with very high masses of up to 200 kDa (proteins). Such results were obtained for superconducting magnets of very high homogeneity of the magnetic field. For magnets with lower homogeneity, the time of transient duration would be smaller. In superconducting magnets used in FT-ICR mass spectrometry the inhomogeneity of the magnetic field in its axial direction prevails over the inhomogeneity in other directions and should be considered as the main factor influencing the synchronic motion of the ion cloud. The inhomogeneity leads to a dependence of the cyclotron frequency from the amplitude of axial oscillation in the potential well of the ion trap. As a consequence, ions in an ion cloud become dephased, which leads to signal attenuation and decrease in the resolving power. Ion cyclotron frequency is also affected by the radial component of the electric field. Hence, by appropriately adjusting the electric field one can compensate the inhomogeneity of the magnetic field and align the cyclotron frequency in the whole range of amplitudes of z-oscillations. A method of magnetic field inhomogeneity compensation in a dynamically harmonized FT-ICR cell is presented, based on adding of extra electrodes into the cell shaped in such a way that the averaged electric field created by these electrodes produces a counter force to the forces caused by the inhomogeneous magnetic field.