Postoperative Rehabilitation with a CAD/CAM-fabricated Occlusal Splint Following Plate Reconstruction after Hemimandibulectomy and Condylectomy: A Case Report.

Mandibular deviation (MD) is a common reconstruction sequela after segmental mandibulectomy. Although proper postoperative rehabilitation is critical for MD management and minimization, the information available is limited. This report describes postoperative rehabilitation with an occlusal splint fabricated using computer-aided design (CAD) and computer-aided manufacturing (CAM) (CAD/CAM-OS) and the results of a threedimensional occlusal analysis using an intraoral scanner after hemimandibulectomy and plate reconstruction. Despite the short follow-up, adherence to postoperative rehabilitation with CAD/CAM-OS for MD correction, even during radiotherapy, was demonstrated by the digital workflow and analysis results.

In vitro evaluation of shape-memory hydrogels for removable dental prostheses and optimization of phase-transition temperature for intraoral use.

STATEMENT OF PROBLEM: Removable dental prostheses require periodic relining with the loss of intaglio surface fit because of mucosal shape changes over time. Therefore, a new material with high adaptability to tissue changes over time would be beneficial. PURPOSE: This study focused on a shape-memory gel (SMG) that softens when heated, retains its shape when cooled, and returns to its original shape when reheated. The purpose was to optimize SMG for intraoral use by controlling the ratio of 2 acrylate monomers and to evaluate the changes in the shape memory and physical properties of SMG with temperature and to evaluate biocompatibility. MATERIAL AND METHODS: SMG specimens were synthesized using the following mixing ratios of 2 monomers, docosyl acrylate (DA) and stearyl acrylate (SA): 0:100, 25:75, 50:50, 75:25, and 100:0. SMG specimens were photopolymerized using a fluorescent light-polymerizing unit. To evaluate shape memory as a function of temperature, permanent deformation was measured based on the standardized compression set test for thermoplastic rubber. For evaluation of the physical properties and cytotoxicity, a 3-dimensionally printed denture base material was used as the control material. All assessments were compared between the groups by using 1-way analysis of variance followed by the Tukey-Kramer multiple comparison test (α=.05). RESULTS: SMGs with a higher amount of DA maintained their compressed shape at room and intraoral temperatures. However, the SMG matrices softened and recovered their original shapes above 60 °C. SMGs showed Shore A hardness equivalent to that of the denture-base polymer material at intraoral temperatures because of the high phase-transition temperature. The low water solubility of SMGs supported the biocompatibility test results. CONCLUSIONS: SMG, in which the phase-transition temperature was controlled by mixing acrylate monomers with different melting points, exhibited shape memory in the intraoral environment. The results indicate the feasibility of applying SMG for the fabrication of removable dental prostheses because of its high adaptability to tissue changes over time and biocompatibility.

Effects of maxillofacial prosthetic treatment on oral health-related quality of life and masticatory ability of patients with head and neck tumors.

PURPOSE: Using multivariate analysis, this study investigated the effectiveness of maxillofacial prosthetic treatment in relation to oral health-related quality of life (OHR-QoL), masticatory ability (food intake status score and gum-jelly test score) and related factors in patients who had undergone surgery for head and neck tumors. METHODS: The study cohort comprised 112 patients who underwent surgical resection and prosthetic treatment among 224 patients with head and neck tumors seen at the Maxillofacial Prosthetics Clinic of Tohoku University Hospital in a 2-year period. Correlations between OHR-QoL, food intake status score, and gum-jelly test score (criterion variables), and age, sex, maxillary defect, tongue/soft tissue defect, reconstructive surgery, and chemoradiotherapy (explanatory variables) were investigated, and the data were examined statistically. RESULTS: Maxillary defect, tongue and soft palate tissue defect, and chemoradiotherapy were identified as factors that hindered the effectiveness of maxillofacial prosthetic treatment for improvement of the OHR-QoL, food intake status score, and gum-jelly test score. On the other hand, reconstructive surgery was a factor that facilitated the improvement of OHR-QoL and masticatory ability with maxillofacial prosthetic treatment. CONCLUSION: The factors identified to be related to the success or failure of maxillofacial prosthetic treatment suggest the importance of combining prosthetic intervention with surgical reconstruction.

Prosthodontic treatment can improve the ingestible food profile in Japanese adult outpatients.

PURPOSE: To investigate the effect of prosthodontic treatment on the ingestible food profile in adult Japanese outpatients, and to identify the related risk factors that can deteriorate the profile. METHODS: The participants were 277 outpatients who visited university-based specialty clinics in Japan for prosthodontic treatment. The demographic data, number of present teeth assessed via intraoral examination, and oral health-related quality of life assessed by the total Oral Health Impact Profile (OHIP-J54) scores of all participants were recorded before treatment. Ingestible food profile score (IFS) was recorded using a validated food intake questionnaire. Eligible participants who answered the questionnaire before and after treatment were categorized into five groups based on the prosthodontic treatments they received (i.e., crowns, bridges, removable partial dentures, removable complete dentures, and removable complete and partial dentures). RESULTS: Multivariate analysis of covariance revealed a statistically significant main effect of prosthodontic intervention (time course: before and after treatment) on mean IFS (P=0.035, F=4.526), even after adjusting for covariates (age, number of present teeth, and treatment modality). Multiple linear regression analysis revealed that the low number of present teeth (r=0.427, P<0.001) and a high OHIP-J54 total score (r=-0.519, P<0.001) of the patients at the baseline were significantly associated with their baseline IFSs, even after adjusting for confounding variables. CONCLUSIONS: The findings of this multicenter follow-up study indicate the importance of prosthodontic rehabilitation in improving patients' ingestible food profiles.

Medical-Dental Collaboration and Interprofessional Training for Maxillofacial Diseases at Tohoku University Hospital.

The Tohoku University Hospital has been a clinical and research facility for all the related departments of Tohoku University. Medical-dental and interprofessional collaboration has resulted in special treatment teams, made up of members of departments such as the center for head and neck cancer, the center for dysphagia, and the cleft lip and palate center. Those treatment teams held conferences, case study meetings, reading sessions, and in-hospital seminars. The purpose of this study was to evaluate the outcomes of various medical-dental and the interprofessional collaboration at Tohoku University Hospital and training program to equip hospital dentists in higher medical institutions. The attainment targets are the acquisition of basic medical skills and knowledge under the guidance of supervising doctors. As a result, the hospital dentists could acquire their own specialized knowledge and skills certificated by each academic society. The smooth team treatment has been achieved, and the number of cases discussed by cancer boards and center for dysphagia has increased year by year due to the efficiency of their clinical pathways. On the dental care side as well, the wearing rates of maxillofacial prosthetic devices such as maxillofacial prostheses and palatal augmentation prostheses (PAP) have improved, which have contributed to improving patient's stomatognathic function. Tohoku University Hospital has been practicing collaboration between medical and dental professionals and it has produced mutual benefits. Our interprofessional training system based on the medical-dental collaboration could develop professionals who have acquired cross-disciplinary knowledge and skills from experienced doctors.

Bone remodeling following mandibular reconstruction using fibula free flap.

To investigate bone remodelling responses to mandibulectomy, a joint external and internal remodelling algorithm is developed here by incorporating patient-specific longitudinal data. The primary aim of this study is to simulate bone remodelling activity in the conjunction region with a fibula free flap (FFF) reconstruction by correlating with a 28-month clinical follow-up. The secondary goal of this study is to compare the long-term outcomes of different designs of fixation plate with specific screw positioning. The results indicated that the overall bone density decreased over time, except for the Docking Site (namely DS1, a region of interest in mandibular symphysis with the conjunction of the bone union), in which the decrease of bone density ceased later and was followed by bone apposition. A negligible influence on bone remodeling outcome was found for different screw positioning. This study is believed to be the first of its kind for computationally simulating the bone turn-over process after FFF maxillofacial reconstruction by correlating with patient-specific follow-up.

Changes in tongue pressure and dysphagia at oral cancer patients by palatal augmentation prosthesis.

BACKGROUND: The palatal augmentation prosthesis (PAP) is an intraoral prosthesis used in the treatment of dysphagia. AIM: The objective of the study is to examine the effect of PAP using tongue pressure and the Videofluoroscopic Dysphagia Scale (VDS) to understand the precise mechanism for improvement in swallowing function with PAP for oral cancer at retrospective survey. METHODS AND RESULTS: Fifteen patients were provided PAPs. Tongue pressure and VDS were evaluated with and without PAP. After intervention with PAP, tongue pressure significantly increased as compared to when without PAP (p < .05). The total mean VDS score with PAP was found to have significantly improved (p < .05). The mean VDS score of the oral phase also significantly improved with the PAP compared to without the PAP group (p < .05). Significant differences (p < .01) were found in each category, such as tongue to palate contact and pyriform sinus residue. CONCLUSION: PAP can improve tongue pressure, tongue to palate contact, and pyriform sinus residue.

Questionnaire survey on pharyngolaryngeal sensation evaluation regarding dysphagia in Japan.

OBJECTIVE: The objective is to conduct a questionnaire survey regarding pharyngolaryngeal sensation evaluation in dysphagia to understand the current situation in Japan. METHOD: The questionnaire was sent to the councilor of the Society of Swallowing and Dysphagia of Japan and the Japanese Society of Dysphagia Rehabilitation-Certified Clinician. The prospective questionnaire survey included the questions listed below: Q1: What do you think of the importance of pharyngolaryngeal sensory evaluation? Q2: Select one of the essential swallowing sensations. Q3: Select one of the following regarding the frequency of sensory examination of the larynx. Q4: Select the proportion of cases the sensory test results affect. Q5: As a pharyngolaryngeal sensory evaluation method in swallowing function evaluation, please fill in the table below for the frequency, difficulty, and effectiveness of the following tests, such as gag reflex, touching the larynx by endoscopy, touching the larynx by the probe with endoscopy, cough reflex test, swallowing provocation test. RESULTS: The essential swallowing sensations of mechanical stimulation, chemical stimulation, thermal stimulation were 84.9%, 5.4%, and 9.7%, respectively. The frequency of touching the larynx by endoscopy in the otolaryngology group and cough reflex test in dentistry was significantly higher than the other groups (p < 0.05). The correlation between the frequency and difficulty or effectiveness of the sensory tests indicated that the frequency and difficulty are significantly correlated between each item. CONCLUSION: Our results aid in increasing understanding and selection of pharyngolaryngeal sensation evaluation for dysphagia patients.

Questionnaire survey on nurses and speech therapists regarding dysphagia rehabilitation in Japan.

OBJECTIVE: Current interventions of dysphagia are not generalizable, and treatments are commonly used in combination. We conducted a questionnaire survey on nurses and speech therapists regarding dysphagia rehabilitation to understand the current situation in Japan. METHODS: The questionnaire was sent to 616 certified nurses in dysphasia nursing and 254 certified speech-language-hearing therapists for dysphagia. Based on "Summaries of training methods in 2014" by JSDR, 24 local indirect exercises, 11 general indirect exercises, and 13 direct exercises were selected. The Likert scale "How do you feel about each method" was used as follows: A; Frequency, B; Ease, C; Adherence, D; Effectiveness (1-5))?". RESULTS: Two hundred fifty (40%) nurses and 145 (57%) speech-language-hearing therapists (ST) responded to the questionnaire. The direct exercise was associated with a significantly high score in every question. In indirect exercises, "Cervical range of motion exercise," "Orofacial myofunctional exercise," "Lip closure exercise." "Ice massage of pharynx" and "Huffing" were used relatively frequently. "Balloon dilatation therapy" and "Tube exercise" was associated with a relatively high discrepancy for two questions. Frequency" and the sum of "Ease," "Adherence," and "Effectiveness." was significantly correlated for local indirect exercises (r2 = 0.928, P < 0.01), general indirect exercises (r2 = 0.987, P < 0.01), and direct exercises (r2 = 0.996, P < 0.01) (Fig. 5). CONCLUSION: This study examined the current situation of dysphagia rehabilitation in Japan. Our results aid to increase understanding and selection of rehabilitative treatments for dysphagia patients in Japan.

Dental implant care and trouble among dependent patients based on the questionnaire survey among Japanese dental practitioners.

BACKGROUND: Self-care and professional care of implants may prove difficult for elderly people who require nursing care. However, the actual state of care and problems remains unknown. In this study, we investigated the actual state of implant problems in elderly people living in their own home or in a nursing home who received visiting dental treatment. METHODS: We mailed questionnaire survey forms to 2339 representatives or specialists who were members of the Japanese Society of Oral Implantology, the Japanese Society of Gerodontology or the Japan Prosthodontic Society. We narrowed down the respondents to those who provided visiting dental treatment, and analyzed the actual state of implants observed during visiting dental treatment (type, care, problems, countermeasures, etc.). RESULTS: Of the 924 dentists who responded to the questionnaire survey, 291 (22%) provided visiting dental treatment. While the majority of implant types encountered in the previous 12 months were root-form implants, there were still a certain number of blade and subperiosteal implants. Daily implant care involved mostly cleaning with a toothbrush + auxiliary tools. The most frequent implant problems encountered in the past were difficulty in cleaning and peri-implantitis. Medication and antiphlogistic treatment were most frequently adopted as countermeasures to implant problems, followed by observation. When we classified the results into those for the dentists who provided implant treatment and those for the dentists who did not, we found that many of the dentists who did not provide implant treatment opted for observation or medication, while those who provided implant treatment also implemented removal of superstructure, retightening of screws, repair and so forth. CONCLUSIONS: We found that many of the implant troubles encountered by dentists who provided visiting dental care were difficulty in cleaning or peri-implantitis, and that the actions taken against these troubles varied depending on the experience of the dentist performing the implant treatment. Our study also revealed that dentists who provide visiting dental care need to acquire knowledge and skills of implant treatment, to have actions prepared in case they encounter such cases, or to closely coordinate with dentists who specialize in implants.

Influence of bone condition on implant placement accuracy with computer-guided surgery.

BACKGROUND: The impact of the jaw bone condition, such as bone quantity and quality in the implant placement site, affecting the accuracy of implant placement with computer-guided surgery (CGS) remains unclear. Therefore, this study aimed to evaluate the influence of bone condition, i.e., bone density, bone width, and cortical bone thickness at the crestal bone on the accuracy of implant placement with CGS. METHODS: A total of 47 tissue-level implants from 25 patients placed in the posterior mandibular area were studied. Implant placement position was planned on the simulation software, Simplant® Pro 16, by superimposing preoperative computed tomography images with stereolithography data of diagnostic wax-up on the dental cast. Implant placement surgery was performed using the surgical guide plate to reflect the planned implant position. The post-surgical dental cast was scanned to determine the position of the placed implant. Linear and vertical deviations between planned and placed implants were calculated. Deviations at both platform and apical of the implant were measured in the bucco-lingual and mesio-distal directions. Intra- and inter-observer variabilities were calculated to ensure measurement reliability. Multiple linear regression analysis was employed to investigate the effect of the bone condition, such as density, width, and cortical bone thickness at the implant site area, on the accuracy of implant placement (α = 0.05). RESULT: Intra- and inter-observer variabilities of these measurements showed excellent agreement (intra class correlation coefficient ± 0.90). Bone condition significantly influenced the accuracy of implant placement using CGS (p < 0.05). Both bone density and width were found to be significant predictors. CONCLUSIONS: Low bone density and/or narrow bucco-lingual width near the alveolar bone crest in the implant placement site might be a risk factor influencing the accuracy of implant placement with CGS.

A workflow for fabricating a hollow obturator by using 3D digital technologies.

Conventional methods used for fabricating hollow obturator prostheses have numerous problems. The workflow presented in this article integrates 3D digital technologies into a functional protocol, enabling the fabrication of single-piece hollow prostheses with no joints by using an optical 3D scanner and a laminating molding device.

Effects of buccal thickness augmentation on bone remodeling after maxillary anterior implantation.

The biomechanics associated with buccal bone thickness (BBT) augmentation remains poorly understood, as there is no consistent agreement in the adequate BBT to avoid over-loading resorption or over-augmenting surgical difficulty. This study utilizes longitudinal clinical image data to establish a self-validating time-dependent finite element (FE)-based remodeling procedure to explore the effects of different buccal bone thicknesses on long-term bone remodeling outcomes in silico. Based upon the clinical computed tomography (CT) scans, a patient-specific heterogeneous FE model was constructed to enable virtual BBT augmentation at four different levels (0.5, 1.0, 1.5, and 2.0 mm), followed by investigation into the bone remodeling behavior of the different case scenarios. The findings indicated that although peri-implant bone resorption decreased with increasing initial BBT from 0.5 to 2 mm, different levels of the reduction in bone loss were associated with the amount of bone augmentation. In the case of 0.5 mm BBT, overloading resorption was triggered during the first 18 months, but such bone resorption was delayed when the BBT increased to 1.5 mm. It was found that when the BBT reached a threshold thickness of 1.5 mm, the bone volume can be better preserved. This finding agrees with the consensus in dental clinic, in which 1.5 mm BBT is considered clinically justifiable for surgical requirement of bone graft. In conclusion, this study introduced a self-validating bone remodeling algorithm in silico, and it divulged that the initial BBT affects the bone remodeling outcome significantly, and a sufficient initial BBT is considered essential to assure long-term stability and success of implant treatment.

Hermeticity of a hollow obturator model using CAD and rapid prototyping technologies.

STATEMENT OF PROBLEM: Although closed hollow obturator prostheses provide the benefit of minimized weight, they also pose challenges. They are complex to fabricate, and contaminated water can easily enter the hollow section through the joined part, making them unsanitary and leading to malodor and increased weight. PURPOSE: The purpose of this in vitro study was to investigate the hermeticity and durability of a hollow obturator model fabricated by using computer-aided design (CAD) and rapid prototyping (RP) techniques and to evaluate the possibility of its clinical use. MATERIAL AND METHODS: Leak testing was used to evaluate the hermeticity and durability of hollow spherical obturator specimens with an outer diameter of 30 mm and 2 different wall thicknesses (1.5 and 2.0 mm). Six specimens were fabricated for each of the wall thicknesses by using CAD and RP techniques. The accumulation of fluids in the hollow obturator specimens was evaluated every day by using megascopic observation with photoirradiation from the base of the specimens. The amount of water absorption and the rate of increase in the weight of the 2 specimens were calculated and compared. Statistical analysis was performed by using the Mann-Whitney U test (α=.05). RESULTS: The application of CAD and RP techniques made it possible to fabricate a hollow obturator model specimen with completely unified parts. The 1.5-mm specimen showed an absorption rate (2.61%) that significantly exceeded that of the 2.0-mm specimen (2.53%) on day 130 (P=.006). By the end of the observation period, the 1.5-mm specimen exhibited large amounts of water absorption and destruction. The 1.5-mm-thick wall had reduced hermeticity than the 2.0-mm-thick wall. CONCLUSIONS: A fully unified hollow obturator model with 2.0-mm-thick walls was fabricated by using CAD and RP techniques. The absence of any joints prevented fluid accumulation, making this method suitable for the fabrication of hollow prostheses.

Changes in oral health-related quality of life after oral rehabilitation with dental implants in patients following mandibular tumor resection.

Oral rehabilitation with prosthodontic treatment considerably influences the well-being and quality of life of patients after ablative oral tumor surgery. This study evaluated the effects of implant-supported prostheses (ISPs) on oral health-related quality of life (OHRQoL) and chewing ability in 10 patients who requested ISPs after mandibular oral tumor resection. OHRQoL was assessed using the Japanese version of the Oral Health Impact Profile (OHIP-49) before and one year after ISP placement. Chewing ability, including self-assessed masticatory ability and occlusal force, was examined at one year after ISP placement. The initial mean total OHIP-49 score of 65.3 ± 9.79 decreased to 46.0 ± 8.14 at one year after ISP placement. Mean OHIP-49 score decreased in all domains, whereas self-assessed masticatory ability increased within one year of ISP placement. There were no significant differences between prosthesis types with respect to the mean OHIP-49 score or self-assessed masticatory ability. In conclusion, ISP placement improves OHRQoL and the self-assessed masticatory ability. Moreover, the prosthesis type might not significantly affect OHRQoL.

Income or education, which has a stronger association with dental implant use in elderly people in Japan?

OBJECTIVES: Although inequalities in dental implant use based on educational level have been reported, no study has used income as a proxy for the socioeconomic status. We examined: (i) income inequalities in implant use; and (ii) whether income or education has a stronger association with implant use in elder Japanese. METHODS: In 2016, a self-reported questionnaire was mailed to participants aged 65 years or older living across Japan as part of the ongoing Japan Gerontological Evaluation Study. We used data from 84,718 respondents having 19 or fewer teeth. After multiple imputation, multi-level logistic regression estimated the association of dental implant use with equivalised income level and years of formal education. Confounders were age, sex, and density of dental clinics in the residential area. RESULTS: 3.1% of respondents had dental implants. Percentages of dental implant use among the lowest (≤ 9 years) and highest (≥ 13 years) educational groups were 1.8 and 5.1, respectively, and among the lowest (0 < 12.2 '1,000 USD/year') and highest (≥ 59.4 '1,000 USD/year') income groups were 1.7 and 10.4, respectively. A fully adjusted model revealed that both income and education were independently associated with dental implant use. Odds ratios for implant use in the highest education and income groups were 2.13 [95% CI = 1.94-2.35] and 4.85 [95% CI = 3.78-6.22] compared with the lowest education and income groups, respectively. From a model with standardised variables, income showed slightly stronger association than education. CONCLUSION: This study reveals a public health problem that even those with the highest education but low income might have limited accessibility to dental implant services.

A preliminary report on dental implant condition among dependent elderly based on the survey among Japanese dental practitioners.

BACKGROUND: The objective of this study was to ascertain the situation relevant to implants, the status of oral self-care, the status of aftercare provided by the dentist who placed the implant, and the usage status of the implant card, in homebound or institutionalized older adults who are receiving home-visit dental care due to the inability to visit a dental clinic on their own. METHODS: A survey questionnaire was sent by post mail to 2339 people who are representative members or dental specialists belonging to any of the following three academic societies: Japanese Society of Oral Implantology, Japanese Society of Gerodontology, and Japan Prosthodontic Society. The survey questions asked were about provision/no provision of implant treatment, provision/no provision of home-visit dental care, the situation of patients after implant treatment, the situation of implants in the context of home-visit dental care, and the usage status and recognition of the implant card. RESULTS: No less than 30% of the dentists had patients who were admitted to the hospital or became homebound after receiving implant treatment at their clinic. Twenty-two percent of the dentists had been consulted about the implants. Dentists who continued to provide post-operative implant care through home-visit dental care accounted for approximately 80%. On the other hand, however, 40% of the dentists did not know the post-implantation status of their implant patients. Of the patients receiving home-visit dental care, approximately 3% had implants (identified mainly by visual inspection). It was found that more than 50% of the dentists offering implant treatment did not use the implant card, and even in cases where it was used, most of the cards were not in the standardized format. CONCLUSIONS: Within the limitation of low response rate to the questionnaire in this preliminary study, we concluded that many of practitioners including specialists indicated the need of universal record of implant for dependent elderly cares.

Biomechanical analysis of bone remodeling following mandibular reconstruction using fibula free flap.

Whilst the newly established biomechanical conditions following mandibular reconstruction using fibula free flap can be a critical determinant for achieving favorable bone union, little has been known about their association in a time-dependent fashion. This study evaluated the bone healing/remodeling activity in reconstructed mandible and its influence on jaw biomechanics using CT data, and further quantified their correlation with mechanobiological responses through an in-silico approach. A 66-year-old male patient received mandibular reconstruction was studied. Post-operative CT scans were taken at 0, 4, 16 and 28 months. Longitudinal change of bone morphologies and mineral densities were measured at three bone union interfaces (two between the fibula and mandibular bones and one between the osteotomized fibulas) to investigate bone healing/remodeling events. Three-dimensional finite element models were created to quantify mechanobiological responses in the bone at these different time points. Bone mineral density increased rapidly along the bone interfaces over the first four months. Cortical bridging formed at the osteotomized interface earlier than the other two interfaces with larger shape discrepancy between fibula and mandibular bones. Bone morphology significantly affected mechanobiological responses in the osteotomized region (R2 > 0.77). The anatomic position and shape discrepancy at bone union affected the bone healing/remodeling process.

Evaluation of water absorption properties and fabrication of hollow obturator model using 3D digital dentistry.

Fluid accumulation in the hollow spaces of obturator is a continuing problem when fabricating hollow obturator prostheses using the conventional method. To address this problem, the three-dimensional (3D) digital technology was used to evaluate water absorption in the inner hollow obturator spaces. Solid and hollow obturator specimens were fabricated using a 3D printer with photocurable resin. Then, the hermeticity was examined by leak testing. These specimens were immersed in distilled water at 37°C. Each specimen was weighed every 24 h for 120 days, and weight changes between each group were compared. Water accumulation in the hollow obturator was not visually observed. Although water absorption was significantly higher in solid specimens, the weight increase rate was also significantly higher in hollow specimens. Applying a laminating 3D photo fabrication made the fabrication of a completely unified hollow obturator model possible.

Cortical Bone Repositioning Technique for Horizontal Alveolar Bone Augmentation: A Case Series.

The objective of this study was to present a novel procedure for cortical bone repositioning (CBR) that maintains a secure space under the periosteum by replacement of the lateral cortex via fixation, employing titanium screws. Seven systemically healthy patients presenting with horizontal alveolar bone defects in radiographs and CT images were enrolled for CBR technique for horizontal alveolar bone augmentation. A lateral cortical bone block was cut in the defects and freed from the original bony surface. A screw was inserted into the block, and the block was placed laterally to allow fixation. The block was checked for adequate stability, and the flap was closed after creation of periosteal releasing incisions to ensure tension-free closure. There were no complications, and 16 implants were placed uneventfully. Preoperative bone width in the defect area was 3.28 mm; the postoperative 4-month bone width in the same area was 6.46 mm. The mean implant stability quotient (ISQ) at placement was 68. At the secondary operation for changing to a healing abutment, the mean ISQ was 72. All patients were functionally and esthetically rehabilitated with implant-supported dentures. CBR technique is a simple procedure without the use of any biomaterials or devices. The main advantage of this technique in comparison to autogenous grafts is the lack of donor site issues. This technique has the possibility of inducing the patient's regenerative ability for bone healing.