Optic replacement in a novel modular intraocular lens system.

PURPOSE: The purpose of the study is to evaluate the stability and ease of replacement of a new modular intraocular lens (IOL) system consisting of a hydrophobic acrylic base unit and a hydrophobic acrylic optic in the rabbit model. METHODS: Five New Zealand white rabbits were utilized. Bilateral phacoemulsification was performed; one eye received the test IOL (ClarVista Harmoni Modular IOL System) and the other, a commercially available hydrophobic acrylic control IOL (Alcon AcrySof SA60AT). Slit-lamp examinations were performed weekly during postoperative weeks 1 to 6. IOL replacement procedures were performed at weeks 2 and 6 using standard instruments. The rabbits were sacrificed at the end of the study (week 6), with all globes analyzed grossly using the Miyake-Apple technique and sectioned and processed for histopathologic examination. RESULTS: The base component and the optic of the Harmoni IOL system remained stable and centred throughout the clinical follow up. Disengagement of the optic component from the base and replacement of the optic were safely and easily accomplished at 2 and 6 weeks postoperatively. Explantation of the control lens required posterior synechiolysis and capsular bag manipulation due to the position of the loops at the periphery of the bag, thus causing zonular stress. CONCLUSIONS: Replacement of the Harmoni optic was found to be safe and efficient compared with the control IOL, as manipulation of the capsular bag to remove haptic components is not necessary with the modular design. The base component of the modular system remained stable and centred throughout the study.

Comparison of Vacuum and Aspiration on Phacoemulsification Efficiency and Chatter Using a Monitored Forced Infusion System.

PURPOSE: To evaluate the effect of vacuum and aspiration rates on phacoemulsification efficiency and chatter using a monitored forced infusion system. DESIGN: In vitro animal study. SETTING: John A. Moran Eye Center, University of Utah, Salt Lake City, Utah. PROCEDURES: Formalin-soaked porcine lenses were divided into 2 mm cubes (tip diameter, 0.9 mm). Vacuum levels were tested at 200, 300, 400, and 500 mm Hg; aspiration rates at 20, 35, and 50 mL/min. Torsional power was set at 60% and intraocular pressure at 50 mm Hg. RESULTS: Increasing vacuum increased efficiency regardless of aspiration rates (R(2) = 0.92; P = .0004). Increasing aspiration further increased efficiency when vacuum was at 400 and 500 mm Hg (P = .004 for 20 vs 35 mL/min, P = .0008 for 35 vs 50 mL/min). At 200 and 300 mm Hg, efficiency only improved when increasing aspiration to 35 mL/min (P < .0001 with 20 vs 35 + 50 mL/min). Chatter improved with increasing vacuum, up to 400 mm Hg (P = .003 for 200 vs 300 mm Hg and P = .045 for 300 vs 500 mm Hg). A similar trend of improved chatter was seen with increasing levels of aspiration. CONCLUSIONS: Vacuum improved efficiency up to 500 mm Hg independent of flow. Flow has an additive effect on efficiency through 50 mL/min, when vacuum is at 400 mm Hg or higher, and only up to 35 mL/min at vacuums less than 400 mm Hg. Chatter correlated with both vacuum and flow such that increasing either parameter decreases chatter, up to 400 mm Hg with vacuum.

Prevention of postoperative capsular bag opacification using intraocular lenses and endocapsular devices maintaining an open or expanded capsular bag.

UNLABELLED: Postoperative capsule opacification is a multifactorial physiological consequence of cataract surgery that remains the most common complication of this procedure. A literature review that included several intraocular lenses (IOLs) and endocapsular devices studied in our laboratory found that devices maintaining the capsular bag in an open or expanded state were associated with improved bag clarity. This observed effect likely occurs secondary to the complex interactions of myriad mechanisms, which include formation of a barrier to lens epithelial cell (LEC) migration, mechanical compression of residual LECs, mechanical stretch at the level of the capsule equator, maintenance of overall bag contour, and enhanced endocapsular circulation of aqueous humor. We review the designs of endocapsular devices and IOLs that minimize the degree of postoperative capsule opacification by preventing capsular bag collapse and discuss the underlying mechanisms that contribute to this phenomenon. FINANCIAL DISCLOSURE: None of the authors has a financial or proprietary interest in any material or method mentioned.

Simultaneous Novel Mutations of LRP5 and TSPAN12 in a Case of Familial Exudative Vitreoretinopathy.

Familial exudative vitreoretinopathy and osteoporosis pseudoglioma syndrome are conditions that result from mutations in the LRP5 gene. Persistent fetal vasculature is a rare congenital malformation that can mimic end-stage familial exudative vitreoretinopathy. The authors report a case of familial exudative vitreoretinopathy in the spectrum of osteoporosis pseudoglioma syndrome associated with novel mutations of the LRP5 and TSPAN12 genes that resulted in a phenotype similar to bilateral persistent fetal vasculature. Both conditions can result in bilateral early-onset blindness. A high index of suspicion, dilated fundus examination and angiography of the parents, and genetic testing are necessary to ensure a correct diagnosis.

Torsional power study using CENTURION phacoemulsification technology.

BACKGROUND: To evaluate the effect of varying levels of power on phacoemulsification efficiency using the CENTURION Vision System. METHODS: Formalin-soaked porcine lenses were divided into 2-mm cubes; 0.9-mm, balanced tips were used. Torsional power levels were tested from 10% to 100% at 10% intervals. Vacuum was set to 550 mmHg, aspiration to 50 ml/min, and intraocular pressure at 50 mmHg. Efficiency (time to lens removal) and chatter (number of lens fragment repulsions from the tip) were determined. RESULTS: Increasing torsional power up to 60% increased efficiency. This effect was linear from 30 to 60% power (R2 = .90; P < 0.05). There were no significant differences in efficiency past 60%. Chatter was highest at 10% power and decreased linearly (R2 = .87; P = 0.007) as power was increased up to 60% power, and chatter did not improve above this power level. CONCLUSIONS: Power improved efficiency only up to a 60% power level, and then was negligible. Chatter correlated well with power up to the 60% level, so that as power was increased, chatter decreased. Because there are no additional benefits in efficiency past 60% power, and because chatter is minimal at 60% power, we recommend torsional ultrasound at 60% as the optimal power setting for using the CENTURION System for phacoemulsification.l.

Effect of pulsing ultrasound on phacoemulsification efficiency.

PURPOSE: To evaluate pulse type technology used to remove lens fragments during phacoemulsification. SETTING: John A. Moran Eye Center Laboratories, University of Utah, Salt Lake City, Utah, USA. DESIGN: Experimental study. METHODS: Lens nuclei soaked in 10 mL of 10% neutral buffered formalin for 2 hours were placed in 10 mL of balanced salt solution. Lenses were cut into 2 mm × 2 mm cubes; no more than 36 hours later, cubes were randomly selected for testing. Two aspiration and 2 vacuum settings were assessed at moderate- and high-flow and vacuum (30 mL/min and 300 mm/Hg, low-flow vacuum; 50 mL/min and 500 mm/Hg, high-flow vacuum), with continuous 50 milliseconds on and off (long pulse) and 6 milliseconds on and off (micropulse) ultrasound. RESULTS: There was a significant difference in efficiency favoring micropulse compared with combined long pulse and continuous pulse in high-flow vacuum at 80% power (P = .018) and between combined long pulse and continuous pulse versus micropulse in high-flow vacuum at 20% power (P = .019). Low-flow vacuum micropulse was more efficient than continuous (19.7%) (P < .0001) and long pulse (22.7%) (P < .0001). Continuous and long pulses were not significantly different from one other. There was a significant difference in chatter rates between high-flow vacuum and low-flow vacuum when all results were compared (P < .0001), with no additional significant differences found. CONCLUSION: Micropulse technology was better than continuous and long pulse at moderate but not high-flow and vacuum settings. At the higher setting, chatter was observed less often, with all modalities more efficient than the lower setting.

Evaluation of stability and capsular bag opacification with a foldable intraocular lens coupled with a protective membrane in the rabbit model.

PURPOSE: To evaluate the stability and capsular bag opacification of a smooth or a patterned silicone protective membrane implanted in the bag with secondary placement of an intraocular lens (IOL). SETTING: John A. Moran Eye Center, University of Utah, Salt Lake City, Utah, USA. DESIGN: Experimental study. METHODS: Twelve New Zealand rabbits had bilateral implantation of a protective membrane and an IOL or an IOL alone. Three groups of 8 eyes each received the IOL and the smooth protective membrane, the IOL and the patterned membrane, or the IOL alone. Slitlamp examination was performed weekly for 4 weeks. The rabbits were then humanely killed and their globes enucleated. Capsular bag opacification was scored based on the Miyake-Apple view, and the eyes underwent histopathology. RESULTS: At 4 weeks, the mean central posterior capsule opacification (PCO) score was 0.28 ± 0.32 (SD) in all eyes with a protective membrane and 2.08 ± 1.28 in eyes with the IOL alone (P < .00001, Student t test). Peripheral PCO and Soemmerring ring formation were also significantly less in eyes with the protective membrane. Histopathologically, the posterior capsules were relatively clear in most IOLs with the protective membrane. The smooth and patterned protective membranes showed a significant difference in overall capsular bag opacification formation compared with the IOLs without the membrane. CONCLUSIONS: The circular geometry of the protective membrane led to expansion of the capsular bag and appeared to prevent capsular bag opacification. Further studies are warranted to assess whether the pattern on the device's posterior surface further enhances this effect. FINANCIAL DISCLOSURE: No author has a financial or proprietary interest in any material or method mentioned.

Anterior haptic flexing and in-the-bag subluxation of an accommodating intraocular lens due to excessive capsular bag contraction.

UNLABELLED: We describe the case of a patient who had cataract surgery with implantation of the hydrophilic acrylic Tetraflex accommodating intraocular lens (IOL), with subsequent development of capsulorhexis phimosis and in-the-bag IOL subluxation. Contraction of the capsular bag secondary to fibrosis resulted in significant anterior flexing of the lens haptic component. Explantation of the IOL-capsular bag complex was required 7 years after implantation. Histopathologic analysis demonstrated multiple areas of thick anterior subcapsular fibrosis. Pseudoexfoliative material was present throughout the surface of the lens capsule. Intraocular lenses manufactured from hydrophilic acrylic material are highly flexible and may be more susceptible to capsule contraction, even in the absence of predisposing ocular and systemic conditions. This case highlights the importance of developing guidelines regarding patient screening and selection for the appropriate use of accommodating and other highly flexible IOLs. FINANCIAL DISCLOSURE: No author has a financial or proprietary interest in any material or method mentioned.

Evaluation of stability and capsular bag opacification of a new foldable adjustable intraocular lens.

BACKGROUND: Incorrect lens power remains one of the most common reasons for intraocular lens explantation/exchange. We evaluated stability and effect on capsular bag opacification of a new foldable modular lens system, with a base component and an optic component in rabbit eyes. METHODS: Bilateral phacoemulsification was performed on six rabbits; one eye received the test lens (Harmoni Modular Lens, ClarVista Medical), whereas the other received a single-piece hydrophobic acrylic control lens (SA60AT, Alcon). Slit-lamp examinations were performed at postoperative weeks 1, 2, 3, 4 and 6. All rabbits were sacrificed at week 6. After enucleation, the eyes were examined grossly from the Miyake-Apple view. Following, all globes were sectioned and processed for histopathological examination. RESULTS: The modular lens was stable in all six rabbits. Uveal biocompatibility was similar to or better in the test eyes when compared with control eyes up to 6 weeks postoperatively. Overall, capsular bag opacification was found to be significantly lower in the test eyes when compared with control eyes. At the 6-week gross examination, central posterior capsule opacification was scored as 0.58 ± 0.73 in the test group, and as 3.00 ± 1.26 in the control group (paired two samples for means t-test; two-tail P = 0.005). CONCLUSIONS: The Harmoni Modular system remains stable within the capsular bag after implantation. Due to the design of the base component featuring long loops, along with peripheral anterior and posterior square edges, the lens appeared to prevent overall capsular bag opacification in the rabbit model.

Delayed manifestation of bilateral scleral thinning after I-BRITE(®) procedure and review of literature for cosmetic eye-whitening procedures.

PURPOSE: To report a case of delayed-onset bilateral scleral thinning and calcium deposition following a cosmetic ocular-whitening procedure (I-BRITE(®)). METHODS: A 33-year-old male patient with a history of right-sided ptosis repair and left-sided anterior uveitis had previously undergone bilateral I-BRITE treatment for chronic conjunctival hyperemia. Four years after the procedure, the patient was referred to our institution with bilateral scleral thinning and overlying calcific depositions. A literature review was performed through PubMed from 1980 through 2014 using the search terms 'cosmetic', 'ocular', 'conjunctivectomy', 'regional conjunctivectomy', 'I-BRITE', 'eye-whitening', 'scleritis', 'necrotizing scleritis', 'anterior uveitis', 'mitomycin C', '5-fluorouracil', and 'bevacizumab', along with associated cross-referencing from relevant articles. RESULTS: Examination of the patient revealed bilateral necrotizing scleritis within the nasal region of both eyes. Calcified plaques were also present within the areas of scleromalacia, along with epithelial defects demonstrated with fluorescein staining. Although evidence of previous intraocular inflammation was apparent within the left eye, there were no active signs of inflammation evident within either eye on initial presentation. Complication rates reported in the literature include: scleral thinning (1.8%), calcific plaque formation (2.9%), fibrovascular proliferation (13%), diplopia (1.2%), elevation of intraocular pressure (4.2%), and recurrence of conjunctival hyperemia (2.1%). CONCLUSION: Cosmetic ocular whitening procedures have an attendant high complication rate, and have been associated with several adverse postoperative complications, which have in turn generated several reservations regarding the veritable benefit of the procedure. Many postsurgical complications may demonstrate delayed apparition, varying from several months to several years after primary surgical intervention as in the case reported here.

Ciliary body medulloepithelioma association with pleuropulmonary blastoma in a familial tumor predisposition syndrome.

Ciliary body medulloepithelioma can rarely present in association with pleuropulmonary blastoma as part of a familial tumor predisposition syndrome. This is thought to occur secondary to a germline mutation in the DICER1 gene. The authors describe a case of ciliary body medulloepithelioma in a 9-year-old girl with a known medical history of pleuropulmonary blastoma.