Sustainable process for fractionation of lignin by the microwave-assisted chemical additive approach: Towards sugarcane leaf biorefinery and characterization.

The microwave assisted pretreatment on sugarcane leaf (SCL) biomass for delignification was studied to enhance cellulose digestibility. In this work, microwave assisted with additives were used to delignification SCL for maximize sugar yield recovery. Single factorial and Central composite design (CCD) were employed to optimize the microwave assisted pretreatment conditions for improve delignification efficiency and the sugar yield recovery. The optimized pretreatment conditions were determined to be 4 min pre-treatment time, 500 W microwave power, 1.0 M Na2CO3 and 10 % biomass loading condition produce maximum reducing sugar yield (601 mg g-1) and glucose sugar yield (231 mg g-1) were achieved during saccharification. Pretreated biomass produced reducing sugar and glucose yields that were 4.5 and 4.1 times higher than those of untreated (native) SCL-N biomass, respectively. Additionally, the recyclability study of black liquor, obtained from optimized conditioned treatment of SCL-MSC (Microwave-assisted sodium carbonate pretreated SCL) resulted in considerable saccharification yield up to three pretreatment cycles. The 1H NMR and 13C NMR spectra studies illustrate that aromatic units present in SCL fractionated lignin samples. The variations of structure features and chemical compositions of the raw and pretreated SCL biomass were analyzed by SEM, XRD and XPS analysis. Overall, SCL-MSC pretreatment condition significantly delignification of SCL and led to the maximum sugar production optimized strategies pretreatment conditions was produced maximum amount of sugar, which is great potential for bio-refinery product development.

`A critical review on current status and environmental sustainability of pre-treatment methods for bioethanol production from lignocellulose feedstocks.

Lignocellulosic biomass resource has been widely used as a natural resource for the synthesis of biofuels and bio-based products through pre-treatment, saccharification and fermentation processes. In this review, we delve into the environmental implications of bioethanol production from the widely utilized lignocellulosic biomass resource. The focus of our study is the critical stage of pre-treatment in the synthesis process, which also includes saccharification and fermentation. By collecting scientific data from the available literature, we conducted a comprehensive life cycle analysis. Our findings revealed substantial differences in the environmental burdens associated with diverse pre-treatment methods used for lignocellulosic biomass. These results highlight the importance of selecting environmentally benign pre-treatment techniques to promote the sustainability of bioethanol production. Future research directions are suggested, emphasizing the optimization of pre-treatment processes to further mitigate their environmental impact.

Microwave-assisted alkali pre-treatment medium for fractionation of rice straw and catalytic conversion to value-added 5-hydroxymethyl furfural and lignin production.

In the current study, the use of microwave-assisted sodium hydroxide medium (MWSH) for pre-treatment and saccharification of rice straw to obtain sugar syrup for the production of 5-hydroxymethyl furfural (5-HMF) was investigated. The optimization of the MWSH pre-treatment was carried out using central composite methodology, resulting in a maximum reducing sugar yield of 350 mg/g of treated rice straw (TRS) and a glucose yield of 255 mg/g of TRS under the conditions of a microwave power of 681 W, a NaOH concentration of 0.54 M, and a pre-treatment time of 3 min. Additionally, the microwave assisted transformation of sugar syrup with titanium magnetic silica nanoparticle as catalyst, producing 41.1 % yield of 5-HMF from the sugar syrup after 30 min microwave irradiation at 120 °C with catalyst loading of 2.0:200 (w/v)). The structural characterization of the lignin was analysed using 1H NMR techniques, and the surface carbon (C1s spectra) and oxygen (O1s spectra) composition changes of the rice straw during pre-treatment were analysed using X-ray photoelectron spectroscopy. The rice straw based bio-refinery process which contains MWSH pretreatment followed by dehydration of sugars achieved high efficiency of 5-HMF production.

Purification, biochemical, and thermal properties of fibrinolytic enzyme secreted by Bacillus cereus SRM-001.

The discovery of microbial fibrinolytic enzymes is essential to treat cardiovascular diseases. This study reports the discovery of a fibrinolytic enzyme secreted by Bacillus cereus SRM-001, a microorganism isolated from the soil of a chicken waste-dump yard. The B. cereus SRM-001 was cultured and the secreted fibrinolytic enzyme purified to show that it is a ∼28 kDa protein. The purified enzyme was characterized for its kinetics, biochemical and thermal properties to show that it possesses properties similar to plasmin. A HPLC-MS/MS analysis of trypsin digested protein indicated that the fibrinolytic enzyme shared close sequence homology with serine proteases reported for other Bacillus sp. The results show that the B. cereus SRM-001 secreted enzyme is a ∼28 kDa serine protease that possesses fibrinolytic potential.