Particle drift simulation from mesotrione and rimsulfuron plus thifensulfuron-methyl mixture through two nozzle types to field and vegetable crops.

Potential for off-target movements follows every herbicide application. Because the launch of acetolactate synthase (ALS)- and 4-hydroxyphenylpyruvate dioxygenase (HPPD)-inhibiting herbicide-tolerant crops will increase the treated area, there is a need to assess the possible negative consequences of any particle drift from those herbicides. Drift happens with every pesticide application, requiring mitigation. Various factors influence drift. Some, such as nozzle type, working pressure, and boom height, can be managed. Others, such as wind, are not easy to manage. In our study, an herbicide tank mixture of mesotrione with rimsulfuron plus thifensulfuron-methyl was sprayed in a low-speed wind tunnel to simulate drift. The airspeed was set at 4.4 m s-1, representing the labeled upper limit for applications. The herbicide solution was sprayed through XR110015 and TTI110015 nozzles. Eight crops were exposed to herbicide drift treatments and biomass data were collected. Droplet size spectra and tracer depositions were evaluated. Tracer deposition was on average threefold higher in all downwind distances (0.5, 1, 2, 3, 4, 6, 9, and 12 m) from the XR nozzle in comparison to the TTI nozzle. As a consequence, greater biomass reduction was recorded for applications with the XR compared to the TTI nozzle from 1 to 12 m downwind. At 12-m distance, biomass was decreased by 7-78% using XR nozzle while 1-27% using the TTI nozzle. Because drift can injure crops, it is very important to mitigate drift from application of formulations containing mesotrione and rimsulfuron plus thifensulfuron-methyl in combination. This can be done by selecting the appropriate nozzle and ensuring optimal distances between crops.

Soybean dose-response to 2,4-D and dicamba at vegetative and reproductive growth stages.

BACKGROUND: Field experiments were conducted across multiple sites in 2012 and 2013 to describe sensitivity of soybean to 2,4-D (six doses) and dicamba (seven doses) at V3 and R1 growth stages. Further experiments were conducted under greenhouse conditions in 2017 and 2018 to compare soybean response to several dicamba herbicides across a broader range of doses than those tested in the field. RESULTS: Soybean yield loss was 6.1-fold greater from 2,4-D exposure at V3 compared to R1 and 1.4 times greater from dicamba exposure at R1 than at V3. In V3 exposures, soybean was 15.4 times more sensitive to dicamba than 2,4-D and 134.4-fold more sensitive to dicamba when exposed at R1. Plant injury and height correlations to grain yield resulted in coefficients ranging from 0.65 to 0.91. In greenhouse experiments, five dicamba products were tested at up to 19 doses and as low as 0.002 g ae ha-1 (3.6 × 10-6 % of maximum single use-rate); however, no differences were observed among formulations used in dicamba-resistant crops versus traditional formulations. A no observable effects dose was not identified due to responses observed even at the lowest doses tested, although hormesis effects were observed in plant height. CONCLUSION: These data suggest that the sensitivity of soybean to dicamba is much greater than what has previously been reported. However, as has been indicated by previous work, that injury does not always result in yield loss. © 2022 Society of Chemical Industry.

Hooded broadcast sprayer for particle drift reduction.

BACKGROUND: There is renewed interest amongst crop protection professionals and regulators in the adoption of spray hoods to further reduce pesticide off-target movement during applications. Although the benefits of sprayer hoods have been reported since the early 1950s, adoption has been relatively low among farmers and applicators. The objective of this study was to evaluate the effectiveness of spray hoods in reducing pesticide drift of spray solutions from nozzles typically used for herbicide applications in row crops with tolerance to dicamba or 2,4-D. RESULTS: Hooded applications substantially reduced spray drift potential across all treatment scenarios compared to conventional applications. Hooded applications using the AIXR nozzle without drift-reducing adjuvant (DRA) had a similar area under the drift curve (31.5) compared to conventional applications (open sprayer) using the TTI nozzle with DRA (27.7), despite the major droplet size differences between these treatments (DV50  = 447.5 and 985 µm, respectively). CONCLUSION: These results indicate that the adoption of spray hoods combined with proper nozzle selection, and the use of DRAs can substantially reduce spray drift potential during pesticide applications. The use of this technology can be complementary to other drift-reducing technologies. © 2021 Society of Chemical Industry.

Spray drift potential of dicamba plus S-metolachlor formulations.

BACKGROUND: Early-postemergence herbicide applications in the USA often include residual herbicides such as S-metolachlor to suppress late late-emerging Amaranthus spp. Although this practice benefits weed control, herbicide tankmixes can influence spray droplet size and drift potential during applications. The addition of S-metolachlor products to dicamba spray solutions generally decreases spray droplet size and increases spray drift potential. Advances in formulation technology fostered the development of products with reduced spray drift potential, especially for herbicide premixes containing multiple active ingredients. The objective of this study was to compare the drift potential of a novel dicamba plus S-metolachlor premix formulation (capsule suspension) against a tankmix containing dicamba (soluble liquid) and S-metolachlor (emulsifiable concentrate) using different venturi nozzles. RESULTS: The MUG nozzle had greater DV0.5 (1128.6 µm) compared to the ULDM (930.3 µm), TDXL-D (872.9 µm), and TTI nozzles (854.8 µm). The premix formulation had greater DV0.5 (971.0 µm) compared to the tankmix (922.3 µm). Nozzle influenced spray drift deposition (P < 0.0001) and soybean biomass reduction (P = 0.0465). Herbicide formulation influenced spray drift deposition (P < 0.0001), and biomass reduction of soybean (P < 0.0001) and cotton (P = 0.0479). The novel capsule suspension formulation (premix) of dicamba plus S-metolachlor had reduced area under the drift curve (AUDC) (577.6) compared to the tankmix (913.7). Applications using the MUG nozzle reduced AUDC (459.9) compared to the other venturi nozzles (ranging from 677.4 to 1141.7). CONCLUSION: Study results evidence that advances in pesticide formulation can improve pesticide drift mitigation. © 2021 Society of Chemical Industry.

Conversations about the Future of Dicamba: The Science Behind Off-Target Movement.

Dicamba is an important herbicide for controlling post-emergent resistant weeds in soybean farming. Recently, the scientific community and general public have further examined off-target transport mechanisms (e.g., spray drift, volatilization, and tank contamination) and the visual responses of soybeans to ultralow dicamba concentrations. This paper synthesizes key chemical concepts and environmental processes associated with dicamba formulations, transport mechanisms, drift measurements, and plant responses. This paper proposes additional areas of research and actions to increase our understanding and communicate the science findings, which should provide farmers with more robust tools and practices for sustainable dicamba use.

Spray drift deposition comparison of fluorimetry and analytical confirmation techniques.

Tracer dyes are often used as surrogates to characterize pesticide spray drift and it is assumed that they accurately reflect analytical measurement of active ingredients; however, the validity of this assumption remains inconclusive. Consequently, the influence of measurement technique on the magnitude of deposition of spray drift was investigated using spray drift samples evaluated by traditional analytical techniques (HPLC-MS/MS) and fluorimetry (1,3,6,8-pyrene-tetra sulfonic acid tetrasodium salt dye tracer). The experiment was conducted in a low-speed wind tunnel under controlled meteorological conditions. The herbicide mesotrione was sprayed through three spray air induction nozzles (anvil deflector flat fan TTI11004; flat fan AI11004; flat fan AIXR11003). Spray drift deposition samples were collected using stainless steel discs pairs placed side by side in the center of the wind tunnel at distances of 5, 10, 20, 30, and 40 ft (1.5, 3.1, 6.1, 9.1, and 12.2 m) from the spray nozzle. The analytical technique determined pesticide concentration on one disc per pair, and the other was evaluated by fluorimetry. The experimental results, analyzed using the linear split-split plot model, revealed that median deposition concentrations were 15% higher using the tracer dye fluorescence method relative to the analytical method, potentially due in part to procedural recovery inefficiencies of the analytical method (the mean overall procedural recovery result and RSD was 87% ± 6.4% (n = 12). This relationship was consistent and held true for the three nozzle types at all distances within the wind tunnel. © 2021 Society of Chemical Industry.

Effect of carrier volume and spray quality on glyphosate-resistant soybean response to sublethal dicamba exposure.

BACKGROUND: Field experiments were conducted across three sites in Mississippi in 2018 to evaluate carrier volume and spray quality effects on glyphosate-resistant soybean response to dicamba. Treatments consisted of dicamba (5.6 g a.e. ha-1 ) plus glyphosate (8.7 g a.e. ha-1 ) applied to soybean at R1 using 140, 105, 70, 35, 14, or 7 L ha-1 . Each carrier volume was applied with TT11002 and XR110015 nozzles which resulted in Fine and Coarse spray qualities, respectively. A colorimetric dye was included in spray solutions to quantify spray coverage of each treatment. RESULTS: Spray coverage decreased with carrier volume and ranged from 21% to 3%. Conversely, soybean injury increased as carrier volume decreased. Soybean height 14 days after treatment (DAT) was reduced 34% to 37% from carrier volumes of 70 to 140 L ha-1 ; however, carrier volumes of 14 and 7 L ha-1 resulted in 45% height reductions. By 28 DAT soybean height was similar among volumes of 35 to 140 L ha-1 (39% to 42% reduction); however, volumes of 14 and 7 L ha-1 resulted in 46% and 51% reductions, respectively. Grain yield was reduced 14% from treatment at 140 L ha-1 and reductions increased with decreased carrier volume to 41% loss at 7 L ha-1 . Averaged across carrier volumes, Fine and Coarse sprays caused 30% and 26% yield loss, respectively. CONCLUSION: These data suggest that carrier volume profoundly affects soybean response to dicamba. Therefore, soybean response to sublethal dicamba doses applied at a constant carrier volume may not reflect physical drift exposure. © 2021 Society of Chemical Industry.

Herbicide drift exposure leads to reduced herbicide sensitivity in Amaranthus spp.

While the introduction of herbicide tolerant crops provided growers new options to manage weeds, the widespread adoption of these herbicides increased the risk for herbicide spray drift to surrounding vegetation. The impact of herbicide drift in sensitive crops is extensively investigated, whereas scarce information is available on the consequences of herbicide drift in non-target plants. Weeds are often abundant in field margins and ditches surrounding agricultural landscapes. Repeated herbicide drift exposure to weeds could be detrimental to long-term management as numerous weeds evolved herbicide resistance following recurrent-selection with low herbicide rates. The objective of this study was to evaluate if glyphosate, 2,4-D, and dicamba spray drift could select Amaranthus spp. biotypes with reduced herbicide sensitivity. Palmer amaranth and waterhemp populations were recurrently exposed to herbicide drift in a wind tunnel study over two generations. Seeds from survival plants were used for the subsequent rounds of herbicide drift exposure. Progenies were subjected to herbicide dose-response studies following drift selection. Herbicide drift exposure rapidly selected for Amaranthus spp. biotypes with reduced herbicide sensitivity over two generations. Weed management programs should consider strategies to mitigate near-field spray drift and suppress the establishment of resistance-prone weeds on field borders and ditches in agricultural landscapes.

Droplet size and physicochemical property effects on herbicide efficacy of pre-emergence herbicides in soybean (Glycine max (L.) Merr).

BACKGROUND: Unlike post-emergence herbicides (POSTs), little is known about droplet size effect on pre-emergence herbicide (PRE) efficacy. Four nozzle types were used to apply different PRE herbicides on eight soybean fields in Missouri and Mississippi in 2017 and 2018, respectively. Pendimethalin, metribuzin, clomazone, imazethapyr and pyroxasulfone were selected based on their physicochemical characteristics (adsorption, volatility and solubility) and were sprayed using XR11002, ULD12002, TTI6011002, and TTI11002 nozzles. RESULTS: The XR nozzle produced the smallest droplet size (DV0.5 ), 204 µm, followed by the ULD, TTI60 and TTI with DV0.5 of 468, 646, and 794 µm, respectively. Droplet size, spray coverage, nozzle type or physicochemical characteristics showed no effect on PRE herbicide efficacy, except in the Monroe County, MS, field, with pendimethalin. The TTI60 twin fan nozzle enhanced pendimethalin weed control (up to 91%) in comparison with pendimethalin sprayed with the TTI nozzle (64%), in a high organic matter (OM) soil composed of large soil clods and high weed pressure. It was hypothesized that improved herbicide penetration assisted by the TTI60 dual fan pattern increased herbicide-moisture contact and clod coverage by the herbicide. Under soils with higher OM content (>2%) pendimethalin weed control was reduced. In soils with low OM (<0.7%), low cation exchange capacity (CEC) (<13.1%) and rainfall of 12.2 mm within 3 days after application, metribuzin also resulted in reduced weed control. CONCLUSION: The results indicate that droplet size does not affect PRE herbicide efficacy regardless of physicochemical herbicide properties including adsorption, volatility and solubility. © 2019 Society of Chemical Industry.

Bifenthrin Baseline Susceptibility and Evaluation of Simulated Aerial Applications in Striacosta albicosta (Lepidoptera: Noctuidae).

Striacosta albicosta (Smith) is a maize pest that has recently expanded its geographical range into the eastern United States and southeastern Canada. Aerial application of pyrethroids, such as bifenthrin, has been a major practice adopted to manage this pest. Reports of field failure of pyrethroids have increased since 2013. Striacosta albicosta populations were collected in 2016 and 2017 from maize fields in Nebraska, Kansas, and Canada and screened with bifenthrin active ingredient in larval contact dose-response bioassays. Resistance ratios estimated were generally low in 2016 (1.04- to 1.32-fold) with the highest LC50 in North Platte, NE (66.10 ng/cm2) and lowest in Scottsbluff, NE (50.10 ng/cm2). In 2017, O'Neill, NE showed the highest LC50 (100.66 ng/cm2) and Delhi, Canada exhibited the lowest (6.33 ng/cm2), resulting in a resistance ratio variation of 6.02- to 15.90-fold. Implications of bifenthrin resistance levels were further investigated by aerial application simulations. Experiments were conducted with a spray chamber where representative S. albicosta populations were exposed to labeled rates of a commercial bifenthrin formulation. Experiments resulted in 100% mortality for all populations, instars, insecticide rates, and carrier volumes, suggesting that levels of resistance estimated for bifenthrin active ingredient did not seem to impact the efficacy of the correspondent commercial product under controlled conditions. Results obtained from this research indicate that control failures reported in Nebraska could be associated with factors other than insecticide resistance, such as issues with the application technique, environmental conditions during and/or after application, or the insect's natural behavior. Data generated will assist future S. albicosta resistance management programs.

Response of Amaranthus spp. following exposure to sublethal herbicide rates via spray particle drift.

The adverse consequences of herbicide drift towards sensitive crops have been extensively reported in the literature. However, little to no information is available on the consequences of herbicide drift onto weed species inhabiting boundaries of agricultural fields. Exposure to herbicide drift could be detrimental to long-term weed management as several weed species have evolved herbicide-resistance after recurrent selection with sublethal herbicide rates This study investigated the deposition of glyphosate, 2,4-D, and dicamba spray particle drift from applications with two different nozzles in a low speed wind tunnel, and their impact on growth and development of Amaranthus spp. Herbicide drift resulted in biomass reduction or complete plant mortality. Inflection points (distance to 50% biomass reduction) for Amaranthus tuberculatus were 7.7, 4.0, and 4.1 m downwind distance for glyphosate, 2,4-D, and dicamba applications with the flat-fan nozzle, respectively, whereas these values corresponded to 2.8, 2.5, and 1.9 m for applications with the air-inclusion nozzle. Inflection points for Amaranthus palmeri biomass reduction were 16.3, 10.9, and 11.5 m for glyphosate, 2,4-D, and dicamba applications with the flat-fan nozzle, respectively, whereas these values corresponded to 7.6, 5.4, and 5.4 m for applications with the air-inclusion nozzle. Plants were more sensitive to glyphosate at higher exposure rates than other herbicides, whereas plants were more sensitive to 2,4-D and dicamba at lower exposure rates compared to glyphosate. Applications with the flat-fan nozzle resulted in 32.3 and 11.5% drift of the applied rate at 1.0 and 3.0 m downwind, respectively, whereas the air-inclusion nozzle decreased the dose exposure in the same distances (11.4 and 2.7%, respectively). Herbicide drift towards field boundaries was influenced by nozzle design and exposed weeds to herbicide rates previously reported to select for herbicide-resistant biotypes.

Effect of insecticide formulation and adjuvant combination on agricultural spray drift.

Loss of crop protection products when agricultural spray applications drift has economic and ecological consequences. Modification of the spray solution through tank additives and product formulation is an important drift reduction strategy that could mitigate these effects, but has been studied less than most other strategies. Therefore, an experimental field study was conducted to evaluate spray drift resulting from agricultural ground applications of an insecticide formulated as a suspension concentrate (SC) and as a wettable powder (WP), with and without two adjuvants. Droplet sizes were also measured in a wind tunnel to determine if indirect methods could be substituted for field experimentation to quantify spray drift from these technologies. Results suggest that spray drift was reduced by 37% when comparing the SC to the WP formulation. As much as 63% drift reduction was achieved by incorporating certain spray adjuvants, but this depended on the formulation/adjuvant combination. The wind tunnel data for droplet spectra showed strong agreement with field deposition trends, suggesting that droplet statistics could be used to estimate drift reduction of spray solutions. These findings can be used to develop a classification scheme for formulated products and tank additives based on their potential for reducing spray drift.

Western corn rootworm pyrethroid resistance confirmed by aerial application simulations of commercial insecticides.

The western corn rootworm (Diabrotica virgifera virgifera LeConte) (WCR) is a major insect pest of corn (Zea mays L.) in the United States (US) and is highly adaptable to multiple management tactics. A low level of WCR field-evolved resistance to pyrethroid insecticides has been confirmed in the US western Corn Belt by laboratory dose-response bioassays. Further investigation has identified detoxification enzymes as a potential part of the WCR resistance mechanism, which could affect the performance of insecticides that are structurally related to pyrethroids, such as organophosphates. Thus, the responses of pyrethroid-resistant and -susceptible WCR populations to the commonly used pyrethroid bifenthrin and organophosphate dimethoate were compared in active ingredient bioassays. Results revealed a relatively low level of WCR resistance to both active ingredients. Therefore, a simulated aerial application bioassay technique was developed to evaluate how the estimated resistance levels would affect performance of registered rates of formulated products. The simulated aerial application technique confirmed pyrethroid resistance to formulated rates of bifenthrin whereas formulated dimethoate provided optimal control. Results suggest that the relationship between levels of resistance observed in dose-response bioassays and actual efficacy of formulated product needs to be further explored to understand the practical implications of resistance.

Evaluation of spray pattern uniformity using three unique analyses as impacted by nozzle, pressure, and pulse-width modulation duty cycle.

BACKGROUND: The increasing popularity of pulse-width modulation (PWM) sprayers requires that application interaction effects on spray pattern uniformity be completely understood to maintain a uniform overlap of spray, thereby reducing crop injury potential and maximizing coverage on target pests. The objective of this research was to determine the impacts of nozzle type (venturi vs. non-venturi), boom pressure, and PWM duty cycle on spray pattern uniformity. Research was conducted using an indoor spray patternator located at the University of Nebraska-Lincoln in Lincoln, NE, USA. Coefficient of variation (CV), root mean square error (RMSE), and average percent error (APE) were used to characterize spray pattern uniformity. RESULTS: Generally, across nozzles and pressures, the duty cycle minimally impacted the CV of spray patterns. However, across nozzles and duty cycles, increasing pressure decreased CV values, resulting in more uniform spray patterns. The RMSE values typically increased as pressure and duty cycle increased across nozzles. This may be the result of a correlation between RMSE values and flow rate as RMSE values also increased as nozzle orifice size increased. Generally, APE increased as the duty cycle decreased across nozzles and pressures with significant increases (40%) caused by the 20% duty cycle. Within non-venturi nozzles, increasing pressure reduced APE across duty cycles, while venturi nozzles followed no such trend. CONCLUSION: Overall, results suggest PWM duty cycles at or above 40% minimally impact spray pattern uniformity. Further, increased application pressures and the use of non-venturi nozzles on PWM sprayers increase the precision and uniformity of spray applications. © 2019 Society of Chemical Industry.

Spray particle drift mitigation using field corn (Zea mays L.) as a drift barrier.

BACKGROUND: Herbicide particle drift reduces application efficacy and can cause severe impacts on nearby vegetation depending on the herbicide mode of action, exposure level, and tolerance to the herbicide. A particle drift mitigation effort placing windbreaks or barriers on the field boundaries to reduce off-target movement of spray particles has been utilized in the past. The objective of this research was to evaluate the effectiveness of field corn (Zea mays L.) at different heights as a particle drift barrier. RESULTS: Applications with a non-air inclusion flat fan nozzle (ER11004) resulted in greater particle drift when compared with an air inclusion nozzle (TTI11004). Eight rows of corn were used as barriers (0.91, 1.22, and 1.98 m height) which reduced the particle drift for both nozzles, especially at shorter downwind distances. Applications with the ER11004 nozzle without corn barriers had 1% of the applied rate (D99 ) predicted to deposit at 14.8 m downwind, whereas this distance was reduced (up to 7-fold) when applications were performed with corn barriers. The combination of corn drift barriers and nozzle selection (TTI11004) provided satisfactory particle drift reduction when the D99 estimates were compared with those for applications with the ER11004 nozzle without corn barriers (up to 10-fold difference). CONCLUSION: The corn drift barriers were effective in reducing particle drift from applications with the ER11004 and the TTI11004 nozzles (Fine and Ultra Coarse spray classifications, respectively). The corn drift barrier had appropriate porosity and width as the airborne spray was captured within its canopy instead of deflecting up and over it. © 2018 Society of Chemical Industry.

Spray droplet size and carrier volume effect on dicamba and glufosinate efficacy.

BACKGROUND: Pesticide applications using a specific droplet size and carrier volume could maximize herbicide efficacy while mitigating particle drift in a precise and efficient manner. The objectives of this study were to investigate the influence of spray droplet size and carrier volume on dicamba and glufosinate efficacy, and to determine the plausibility of droplet-size based site-specific weed management strategies. RESULTS: Generally, across herbicides and carrier volumes, as droplet size increased, weed control decreased. Increased carrier volume (187 L ha-1 ) buffered this droplet size effect, thus greater droplet sizes could be used to mitigate drift potential while maintaining sufficient levels of weed control. To mitigate drift potential and achieve satisfactory weed control (≥ 90% of maximum observed control), a 900 µm (Ultra Coarse) droplet size paired with 187 L ha-1 carrier volume is recommended for dicamba applications and a 605 µm (Extremely Coarse) droplet size across carrier volumes is recommended for glufosinate applications. Although general droplet size recommendations were created, optimum droplet sizes for weed control varied significantly across site-years. CONCLUSION: Convoluted interactions occur between droplet size, carrier volume, and other application parameters. Recommendations for optimizing herbicide applications based on droplet size should be based on a site-specific management approach to better account for these interactions. © 2018 Society of Chemical Industry.

Metabolism of 2,4-dichlorophenoxyacetic acid contributes to resistance in a common waterhemp (Amaranthus tuberculatus) population.

BACKGROUND: Synthetic auxins such as 2,4-dichlorophenoxyacetic acid (2,4-D) have been widely used for selective control of broadleaf weeds since the mid-1940s. In 2009, an Amaranthus tuberculatus (common waterhemp) population with 10-fold resistance to 2,4-D was found in Nebraska, USA. The 2,4-D resistance mechanism was examined by conducting [14 C] 2,4-D absorption, translocation and metabolism experiments. RESULTS: No differences were found in 2,4-D absorption or translocation between resistant and susceptible A. tuberculatus plants. Resistant plants metabolized [14 C] 2,4-D more rapidly than did susceptible plants. The half-life of [14 C] 2,4-D in susceptible plants was 105 h, compared with 22 h in resistant plants. Pretreatment with the cytochrome P450 inhibitor malathion inhibited [14 C] 2,4-D metabolism in resistant plants and reduced the 2,4-D dose required for 50% growth inhibition (GR50 ) of resistant plants by 7-fold to 27 g ha-1 , similar to the GR50 for susceptible plants in the absence of malathion. CONCLUSION: Our results demonstrate that rapid 2,4-D metabolism is a contributing factor to resistance in A. tuberculatus, potentially mediated by cytochrome P450. Metabolism-based resistance to 2,4-D could pose a serious challenge for A. tuberculatus control because of the potential for cross-resistance to other herbicides. © 2017 Society of Chemical Industry.

Distribution of glyphosate-resistant Amaranthus spp. in Nebraska.

BACKGROUND: Palmer amaranth (Amaranthus palmeri S. Wats.), common waterhemp (Amaranthus tuberculatus var. rudis), and redroot pigweed (Amaranthus retroflexus L.) are major weeds occurring in fields throughout Nebraska with recurrent grower complaints regarding control with glyphosate. The objective of this study was to investigate the frequency and distribution of glyphosate-resistant Palmer amaranth, common waterhemp, and redroot pigweed populations in Nebraska. The study also aimed to investigate how agronomic practices influence the occurrence of glyphosate resistance in the three Amaranthus species. RESULTS: Glyphosate resistance was widespread in common waterhemp (81% of the screened populations), few Palmer amaranth populations were glyphosate-resistant (6% of the screened populations), whereas no glyphosate-resistant redroot pigweed populations were identified in Nebraska. Weed species, geographic region within the state, and current crop were the most important factors predicting the occurrence of glyphosate resistance in fields infested with Amaranthus species in Nebraska. CONCLUSION: The intensive glyphosate selection pressure exerted in soybean (Glycine max) fields in eastern Nebraska is one of the major factors causing widespread occurrence of glyphosate resistance in common waterhemp in the state. The relatively low frequency of glyphosate-resistant Palmer amaranth in the state highlights the importance of the application timing and the adoption of multiple modes of action in weed management practices to delay the evolution of glyphosate resistance. © 2017 Society of Chemical Industry.

Factors Affecting the Development and Severity of Goss's Bacterial Wilt and Leaf Blight of Corn, Caused by Clavibacter michiganensis subsp. nebraskensis.

Goss's bacterial wilt and leaf blight, which is caused by Clavibacter michiganensis subsp. nebraskensis, is a disease of corn (Zea mays) that has been increasingly reported across the Midwest since its reemergence in western Nebraska, northeastern Colorado, and southeastern Wyoming during the 2006 growing season. The objective of this study was to identify environmental and agronomic factors contributing to the incidence of the disease across the Corn Belt through a multistate survey conducted during the 2011 growing season. Of the 2,400 surveys distributed throughout nine states, 486 were returned with corn leaf samples, of which 70% tested positive for C. michiganensis subsp. nebraskensis using an enzyme-linked immunosorbent assay. The agronomic data associated with each field were analyzed using classification and regression tree and random forest analyses to identify the factors that contributed most to Goss's bacterial wilt and leaf blight development. A χ2 test of independence was also done to determine relationships between certain variables and disease incidence. The two best predictors of Goss's bacterial wilt and leaf blight were hybrid resistance to Goss's bacterial wilt and leaf blight, as indicated by the seed companies' score and a planting population density >67,500 plants ha-1. Other important predictors included longitude, planting date, crop rotation, percent residue, yield history, tillage, and growth stage. Relationships between glyphosate applications, foliar fungicide applications, and corn rootworm beetle with samples testing positive for C. michiganensis subsp. nebraskensis were also detected. These data contribute to our understanding of factors that increase the risk of Goss's bacterial wilt and leaf blight, and should enable more effective management practices to be adopted or developed.

Genetic and molecular characterization of submergence response identifies Subtol6 as a major submergence tolerance locus in maize.

Maize is highly sensitive to short term flooding and submergence. Early season flooding reduces germination, survival and growth rate of maize seedlings. We aimed to discover genetic variation for submergence tolerance in maize and elucidate the genetic basis of submergence tolerance through transcriptional profiling and linkage analysis of contrasting genotypes. A diverse set of maize nested association mapping (NAM) founder lines were screened, and two highly tolerant (Mo18W and M162W) and sensitive (B97 and B73) genotypes were identified. Tolerant lines exhibited delayed senescence and lower oxidative stress levels compared to sensitive lines. Transcriptome analysis was performed on these inbreds to provide genome level insights into the molecular responses to submergence. Tolerant lines had higher transcript abundance of several fermentation-related genes and an unannotated Pyrophosphate-Dependent Fructose-6-Phosphate 1-Phosphotransferase gene during submergence. A coexpression network enriched for CBF (C-REPEAT/DRE BINDING FACTOR: C-REPEAT/DRE BINDING FACTOR) genes, was induced by submergence in all four inbreds, but was more activated in the tolerant Mo18W. A recombinant inbred line (RIL) population derived from Mo18W and B73 was screened for submergence tolerance. A major QTL named Subtol6 was mapped to chromosome 6 that explains 22% of the phenotypic variation within the RIL population. We identified two candidate genes (HEMOGLOBIN2 and RAV1) underlying Subtol6 based on contrasting expression patterns observed in B73 and Mo18W. Sources of tolerance identified in this study (Subtol6) can be useful to increase survival rate during flooding events that are predicted to increase in frequency with climate change.