Dopant-Free Pyrrolopyrrole-Based (PPr) Polymeric Hole-Transporting Materials for Efficient Tin-Based Perovskite Solar Cells with Stability Over 6000 h.

A new set of pyrrolopyrrole-based (PPr) polymers incorporated with thioalkylated/alkylated bithiophene (SBT/BT) is synthesized and explored as hole-transporting materials (HTMs) for Sn-based perovskite solar cells (TPSCs). Three bithiophenyl spacers bearing the thioalkylated hexyl (SBT-6), thioalkylated tetradecyl (SBT-14), and tetradecyl (BT-14) chains are utilized to examine the effect of the alkyl chain lengths. Among them, the TPSCs are fabricated using PPr-SBT-14 as HTMs through a two-step approach by attaining a power conversion efficiency (PCE) of 7.6% with a remarkable long-term stability beyond 6000 h, which has not been reported elsewhere for a non-PEDOT:PSS-based TPSC. The PPr-SBT-14 device is stable under light irradiation for 5 h in air (50% relative humidity) at the maximum power point (MPP). The highly planar structure, strong intramolecular S(alkyl)···S(thiophene) interactions, and extended π-conjugation of SBT enable the PPr-SBT-14 device to outperform the standard poly(3-hexylthiophene,-2,5-diyl (P3HT) and other devices. The longer thio-tetradecyl chain in SBT-14 restricts molecular rotation and strongly affects the molecular conformation, solubility, and film wettability over other polymers. Thus, the present study makes a promising dopant-free polymeric HTM model for the future design of highly efficient and stable TPSCs.

Electrodeposition of CoxNiVyOz Ternary Nanopetals on Bare and rGO-Coated Nickel Foam for High-Performance Supercapacitor Application.

We report a simple strategy to grow a novel cobalt nickel vanadium oxide (CoxNiVyOz) nanocomposite on bare and reduced-graphene-oxide (rGO)-coated nickel foam (Ni foam) substrates. In this way, the synthesized graphene oxide is coated on Ni foam, and reduced electrochemically with a negative voltage to prepare a more conductive rGO-coated Ni foam substrate. The fabricated electrodes were characterized with a field-emission scanning electron microscope (FESEM), energy-dispersive X-ray spectra (EDX), X-ray photoelectron spectra (XPS), and Fourier-transform infrared (FTIR) spectra. The electrochemical performance of these CoxNiVyOz-based electrode materials deposited on rGO-coated Ni foam substrate exhibited superior specific capacitance 701.08 F/g, which is more than twice that of a sample coated on bare Ni foam (300.31 F/g) under the same experimental conditions at current density 2 A/g. Our work highlights the effect of covering the Ni foam surface with a rGO film to expedite the specific capacity of the supercapacitors. Despite the slightly decreased stability of a CoxNiVyOz-based electrode coated on a Ni foam@rGO substrate, the facile synthesis, large specific capacitance, and preservation of 92% of the initial capacitance, even after running 5500 cyclic voltammetric (CV) scans, indicate that the CoxNiVyOz-based electrode is a promising candidate for high-performance energy-storage devices.

Seed-Assisted Growth of Methylammonium-Free Perovskite for Efficient Inverted Perovskite Solar Cells.

The traditional way to stabilize α-phase formamidinium lead triiodide (FAPbI3 ) perovskite often involves considerable additions of methylammonium (MA) and bromide into the perovskite lattice, leading to an enlarged bandgap and reduced thermal stability. This work shows a seed-assisted growth strategy to induce a bottom-up crystallization of MA-free perovskite, by introducing a small amount of α-CsPbBr3 /DMSO (5%) as seeds into the pristine FAPbI3 system. During the initial crystalization period, the typical hexagonal α-FAPbI3 crystals (containing α-CsPbBr3 seeds) are directly formed even at ambient temperature, as observed by laser scanning confocal microscopy. It indicates that these seeds can promote the formation and stabilization of α-FAPbI3 below the thermodynamic phase-transition temperature. After annealing not beyond 100 °C, CsPbBr3 seeds homogeneously diffused into the entire perovskite layer via an ions exchange process. This work demonstrates an efficiency of 22% with hysteresis-free inverted perovskite solar cells (PSCs), one of the highest performances for MA-free inverted PSCs. Despite absented passivation processes, open-circuit voltage is improved by 100 millivolts compared to the control devices with the same stoichiometry, and long-term operational stability retained 92% under continuous full sun illumination. Going MA-free and low-temperature processes are a new insight for compatibility with tandems or flexible PSCs.

Slow Passivation and Inverted Hysteresis for Hybrid Tin Perovskite Solar Cells Attaining 13.5% via Sequential Deposition.

Herein, we report a sequential deposition procedure to passivate the surface of a hybrid mixed cationic tin perovskite (E1G20) with phenylhydrazinium thiocyanate (PHSCN) dissolved in trifluoroethanol solvent. The photoluminescence lifetime of the PHSCN film was enhanced by a factor of 6, while the charge-extraction rate from perovskite to C60 layer was enhanced by a factor of 2.5, in comparison to those of the E1G20 film. A slow surface passivation was observed; the performance of the PHSCN device improved upon increasing the storage period to attain an efficiency of 13.5% for a current-voltage scan in the forward bias direction. An inverted effect of hysteresis was observed in that the efficiency of the forward scan was greater than that of the reverse scan. An ion-migration model as a result of the effect of the phenylhydrazinium surface passivation is proposed to account for the observed phenomena. The device was stable upon shelf storage in a glovebox for 3000 h.

Sandwich Evaporation-Solvent Annealing Fabrication of Highly Crystalline MAPbIxCl3-x Perovskite Solar Cells.

Perovskites doped with chlorine (Cl-), which are usually fabricated using the solution process, can effectively improve the stability and carrier mobility. Compared with the low tolerance of the solution process that relies mostly on personal skill, thermal evaporation is an important method for large-scale production of perovskite solar cells but the production cost is high. In this study, the sandwich evaporation-solvent annealing (SE-SA) method is proposed. Using sandwich evaporation with a low-cost chamber of the sandwich evaporation technique (SET) made in the laboratory and with the help of DMSO steam-assisted crystallization, we have successfully produced chlorine-containing perovskite solar cells with a high crystallinity and a high efficiency of 15.1% with Voc = 0.98 V, Jsc = 21.94 mA/cm2, FF = 74.29%, and Rs = 3.66 Ω·cm2, which can greatly reduce the production cost. It is worth mentioning that all the processes are carried out outside a glove box, which makes it possible for large-scale production of chlorine-containing perovskite solar cells by evaporation.

Low photoactive phase temperature all-inorganic, tin-lead mixed perovskite solar cell.

CsPbI3 films have recently attracted significant attention as efficient absorbers for thermally stable photovoltaic devices. However, their large bandgap and photoactive black phase formation at high temperature impede their use for practical applications. Using the concept of lattice contraction, we demonstrate a low bandgap (≤1.44 eV) cesium-based inorganic perovskite CsPb x Sn1-x I3 that can be solution processed at low temperature for photovoltaic devices. The results from systematic measurements imply that the partial substitution of lead (Pb) with tin (Sn) results in crystal lattice contraction, which is essential for realizing photoactive phase formation at l00 °C and stabilizing photoactive phase at room temperature. These findings demonstrate the potential of using cesium-based inorganic perovskite as viable alternatives to MA- or FA-based perovskite photovoltaic materials.

Growth process control produces high-crystallinity and complete-reaction perovskite solar cells.

The growth process control (GPC) method, a new method which is better than thermal evaporation, for producing high-crystallinity perovskites by controlling the growth time in a low vacuum, is explored in this work. Inspired by evaporation technology, GPC is an effective method for modifying traditional thermal evaporation and for controlling the crystal growth of perovskite CH3NH3I3. Compared to fabrication with the process of co-evaporation, the MAPbI3 perovskite solar cell fabricated by GPC has high uniformity and film coverage. All of the manufacturing is carried out outside of the glove box. It provides an easy and effective way for perovskite fabrication for industrialization. Here, after using GPC to form perovskite solar cells, the residual methylammonium iodide (MAI) and PbI2 which is produced by the evaporation process can react completely, observed by time of flight secondary ion mass spectrometry (TOF-SIMS). Finally, formed by GPC, perovskite solar cells exhibit high performance and fewer crystal defects. The electron and hole recombination is greatly reduced. Through the GPC method, the J sc and the filling factor are improved with the increase of time after the fabrication. The power conversion efficiency was increased from 11.12% to 16.4%.