Decoding Active Sites for Highly Efficient Semihydrogenation of Acetylene in Palladium-Copper Nanoalloys.

Accurately decoding the three-dimensional atomic structure of surface active sites is essential yet challenging for a rational catalyst design. Here, we used comprehensive techniques combining the pair distribution function and reverse Monte Carlo simulation to reveal the surficial distribution of Pd active sites and adjacent coordination environment in palladium-copper nanoalloys. After the fine-tuning of the atomic arrangement, excellent catalytic performance with 98% ethylene selectivity at complete acetylene conversion was obtained in the Pd34Cu66 nanocatalysts, outperforming most of the reported advanced catalysts. The quantitative deciphering shows a large number of active sites with a Pd-Pd coordination number of 3 distributed on the surface of Pd34Cu66 nanoalloys, which play a decisive role in highly efficient semihydrogenation. This finding not only opens the way for guiding the precise design of bimetal nanocatalysts from atomic-level insight but also provides a method to resolve the spatial structure of active sites.

Hexagonal Halide Perovskite Cs2LiInCl6: Cation Ordering, Face-Shared Octahedral Trimers and Mn2+ Luminescence.

The In-based double perovskite halides have been widely studied for promising optical-electric applications. The halide hexagonal perovskite Cs2LiInCl6 was isolated using solid-state reactions and investigated using X-ray diffraction and solid-state NMR spectra. The material adopts a 12-layered hexagonal structure (12R) consisting of layered cationic orders driven by the cationic charge difference and has Li+ cations in the terminal site and In3+ in the central site of face-shared octahedron trimers. Such a cationic ordering pattern is stabilized by electrostatic repulsions between the next-nearest neighboring cations in the trimers. The LiCl6 octahedron displays large distortion and is confirmed by 7Li SSNMR in the Cs2LiInCl6. The Cs2LiInCl6 material has a direct bandgap of ~ 4.98 eV. The Cs2LiInCl6: Mn displays redshift luminescence (centered at ~610 - 622 nm) from the substituted Mn2+ emission in octahedron with larger PLQY (17.8%-48%) compared with that of Cs2NaInCl6: Mn2+.  The Mn-doped materials show luminescent concentration quenching and thermal quenching. The composition Cs2Li0.99In0.99Mn0.02Cl6 exhibits the highest PL intensity, a maximum PLQY of 48%, and high luminescent retention rate of ~ 86% below 400 K and is suitable for application for pc-LED. These findings contribute to our understanding of the chloride perovskites and hold potential for widespread optical applications.

Clinical characteristics and outcomes of COVID-19-associated encephalopathy in children.

Apart from the typical respiratory symptoms, coronavirus disease 2019 (COVID-19) also affects the central nervous system, leading to central disorders such as encephalopathy and encephalitis. However, knowledge of pediatric COVID-19-associated encephalopathy is limited, particularly regarding specific subtypes of encephalopathy. This study aimed to assess the features of COVID-19-associated encephalopathy/encephalitis in children. We retrospectively analyzed a single cohort of 13 hospitalized children with COVID-19-associated encephalopathy. The primary outcome was the descriptive analysis of the clinical characteristics, magnetic resonance imaging and electroencephalography findings, treatment progression, and outcomes. Thirteen children among a total of 275 (5%) children with confirmed COVID-19 developed associated encephalopathy/encephalitis (median age, 35 months; range, 3-138 months). Autoimmune encephalitis was present in six patients, acute necrotizing encephalopathy in three, epilepsy in three, and central nervous system small-vessel vasculitis in one patient. Eight (62%) children presented with seizures. Six (46%) children exhibited elevated blood inflammatory indicators, cerebrospinal fluid inflammatory indicators, or both. Two (15%) critically ill children presented with multi-organ damage. The magnetic resonance imaging findings varied according to the type of encephalopathy/encephalitis. Electroencephalography revealed a slow background rhythm in all 13 children, often accompanied by epileptic discharges. Three (23%) children with acute necrotizing encephalopathy had poor prognoses despite immunotherapy and other treatments. Ten (77%) children demonstrated good functional recovery without relapse. This study highlights COVID-19 as a new trigger of encephalopathy/encephalitis in children. Autoimmune encephalitis is common, while acute necrotizing encephalopathy can induce poor outcomes. These findings provide valuable insights into the impact of COVID-19 on children's brains.

Machine Learning Prediction of Quantum Yields and Wavelengths of Aggregation-Induced Emission Molecules.

The aggregation-induced emission (AIE) effect exhibits a significant influence on the development of luminescent materials and has made remarkable progress over the past decades. The advancement of high-performance AIE materials requires fast and accurate predictions of their photophysical properties, which is impeded by the inherent limitations of quantum chemical calculations. In this work, we present an accurate machine learning approach for the fast predictions of quantum yields and wavelengths to screen out AIE molecules. A database of about 563 organic luminescent molecules with quantum yields and wavelengths in the monomeric/aggregated states was established. Individual/combined molecular fingerprints were selected and compared elaborately to attain appropriate molecular descriptors. Different machine learning algorithms combined with favorable molecular fingerprints were further screened to achieve more accurate prediction models. The simulation results indicate that combined molecular fingerprints yield more accurate predictions in the aggregated states, and random forest and gradient boosting regression algorithms show the best predictions in quantum yields and wavelengths, respectively. Given the successful applications of machine learning in quantum yields and wavelengths, it is reasonable to anticipate that machine learning can serve as a complementary strategy to traditional experimental/theoretical methods in the investigation of aggregation-induced luminescent molecules to facilitate the discovery of luminescent materials.

Video-electroencephalographic findings and clinical characteristics of bathing seizures in children.

Objective: To explore the electroencephalogram (EEG) and clinical characteristics of childhood bathing epilepsy. Methods: We conducted a prospective summary of the clinical data from 10 children with bathing epilepsy who were admitted to Hunan Children's Hospital from April 2019 to November 2023 and analyzed their EEGs and clinical characteristics. Results: Our 10 patients included eight males and two females, with seizure-onset ages ranging from 4 months and 20 days to 14 months. Nine cases showed normal intellectual development, and one case manifested delayed development. The Video-EEG (VEEG) findings showed that nine cases exhibited normal background with no interictal epileptic discharge. The seizures were characterized by lip cyanosis, tachycardia or bradycardia, weakness, paleness, and loss of consciousness. Ictal EEG revealed rhythmic fast waves, spike waves, spike-slow waves, or slow and sharp-wave activity over the temporal region (eight cases) or the occipital and temporal regions (one case), finally evolving into a delta rhythm that lasted for 57-201 s. These children exhibited no seizures after discontinuing bathing and were not administered antiseizure medication. The interictal EEG of one case reflected mild slow background and focal interictal epileptic discharge; and her semiology was eyes gazing to right, with clonic movements of the right face and lips, lip cyanosis, bradycardia, and impaired consciousness. Ictal EEG showed spike-wave and spike-slow-wave rhythms over the left central, parietal, and temporal regions; these then spread to the left hemisphere, lasting for approximately 104 s. This patient did not exhibit bathing seizures after stopping her bathing but later experienced frequent spontaneous and drug-resistant seizures. The interictal EEG background slowed down, while focal epileptic discharge increased. Her intellectual development was significantly delayed, and a novel pathogenic mutation in the SMC1A gene, c.298+2T>C, was detected. She was diagnosed with developmental and epileptic encephalopathy. Conclusion: A majority of children with bathing epilepsy in our study showed focal autonomic seizures accompanied by impaired consciousness. Stopping bathing could control the seizures and showed a good prognosis. A few infants manifested a poor prognosis, and we posit that bathing seizure rarely constitute the early manifestations of developmental and epileptic encephalopathy. VEEG findings and clinical features can also indicate the prognosis.

An isotropic zero thermal expansion alloy with super-high toughness.

Zero thermal expansion (ZTE) alloys with high mechanical response are crucial for their practical usage. Yet, unifying the ZTE behavior and mechanical response in one material is a grand obstacle, especially in multicomponent ZTE alloys. Herein, we report a near isotropic zero thermal expansion (αl = 1.10 × 10-6 K-1, 260-310 K) in the natural heterogeneous LaFe54Co3.5Si3.35 alloy, which exhibits a super-high toughness of 277.8 ± 14.7 J cm-3. Chemical partition, in the dual-phase structure, assumes the role of not only modulating thermal expansion through magnetic interaction but also enhancing mechanical properties via interface bonding. The comprehensive analysis reveals that the hierarchically synergistic enhancement among lattice, phase interface, and heterogeneous structure is significant for strong toughness. Our findings pave the way to tailor thermal expansion and obtain prominent mechanical properties in multicomponent alloys, which is essential to ultra-stable functional materials.

The glass phase in the grain boundary of Na3Zr2Si2PO12, created by gallium modulation.

Na3Zr2Si2PO12 has been proven to be a promising electrolyte for solid-state sodium batteries. However, its poor conductivity prevents application, caused by the large ionic resistance created by the grain boundary. Herein, we propose an additional glass phase (Na-Ga-Si-P-O phase) to connect the grain boundary via Ga ion introduction, resulting in enhanced sodium-ion conduction and electrochemical performance. The optimized Na3Zr2Si2PO12-0.15Ga electrolyte exhibits Na+ conductivity of 1.65 mS cm-1 at room temperature and a low activation energy of 0.16 eV, with 20% newly formed glass phase enclosing the grain boundary. Temperature-dependent NMR line shapes and spin-lattice relaxation were used to estimate the Na self-diffusion and Na ion hopping. The dense glass-ceramic electrolyte design strategy and the structure-dynamics-property correlation from NMR, can be extended to the optimization of other materials.

Au/Ti3C2/g-C3N4 Ternary Composites Boost H2 Evolution Efficiently with Remarkable Long-Term Stability by Synergistic Strategies.

The use of novel two-dimensional MXene materials and conventional g-C3N4 photocatalysts to fabricate the composites for hydrogen evolution reaction (HER) has attracted much attention, for which there is plenty of room for the enhancement of hydrogen evolution rates particularly under visible light and photostability. Herein, g-C3N4 was modified by copolymerization of malonamide and melamine and used to fabricate the ternary composites of Au particles and Ti3C2 MXene, and based on the synergistic effect, the composites enhanced the hydrogen evolution rates by 2.1, 99.8, and ∞ times compared with the unmodified g-C3N4 under UV, simulated sunlight, and visible light illumination, respectively. Moreover, the composite exhibited a sustained hydrogen evolution capacity in the cycle test for up to 120 h. Theoretical calculations and experimental results indicated that the hot electrons of Au are injected into the modified g-C3N4 and transferred to Ti3C2 simultaneously along with the photogenerated electrons of the modified g-C3N4 and then further transferred to Au, forming a photogenerated electron transfer channel of Au and modified g-C3N4 → Ti3C2 → Au within the composite. Ti3C2 acts as a bridge for fast separation of photogenerated electrons and holes on Au and modified g-C3N4, playing a key role in the enhanced photocatalytic performance. In addition, the visible light absorption ability of Au also positively contributed to the enhancement of visible light photocatalytic performance by providing hot electrons. Therefore, the selection of suitable cocatalysts for the design of composites is a crucial research direction to improve the photocatalytic performance and photostability of photocatalysts.

Tolerance Factor and Phase Stability of the KCoO2-Type AMN2 Nitrides.

In order to help understand the structural stability of KCoO2-type ternary nitrides AMN2, referring to perovskite structure, a tolerance factor t is proposed to describe the size effect on the phase/symmetry options of the experimentally accessible AMN2 nitrides. This leads to a range of t values above 0.946 for structurally stable KCoO2-type AMN2 nitrides with t values around 0.970 for the orthorhombic and tetragonal phase boundary. In contrast, most of AMN2 nitrides exhibit α-NaFeO2-type structure with t ∼ 0.898-0.946 and cations ordered or disordered rocksalt structure while t below 0.898. Employing the proposed criterion, the structure formation for other ternary AMN2 compositions with lanthanum and alkaline earth cations for the A sites were predicted, which was testified through the synthesis attempts and complemented by formation energy evaluations. The efforts to synthesize the ternary Lanthanide and alkaline earth-based AMN2 nitrides were unsuccessful, which could associate the structural instability with the large formation energies of lanthanide nitrides LaMN2 and the greater tolerance factor of 1.048 for BaTiN2. The experimentally already synthesized AMN2 nitrides could be categorized into three types with different tolerance factors, and scarce AMN2 nitrides with lower formation energies would be accessible using different synthetic routes beyond the traditional solid-state synthesis method.

Thermally Induced Oxygen Vacancies and High Oxide Ion Conduction in K2ZnV2O7 with a Melilite-Related Structure.

Donor-doped melilite materials with interstitial oxygen defects in the structure are good oxide ion conductors with negligible electronic conduction and show great potential in the ceramic electrolyte of intermediate-temperature solid oxide fuel cells (IT-SOFC). However, the parent melilite-structured materials with stoichiometric oxygen are usually insulators. Herein, we reported high and pure oxide ion conduction in the parent K2ZnV2O7 material with a melilite-related structure, e.g., ∼1.14 × 10-3 S/cm at 600 °C, which is comparable to that of the state-of-the-art yttrial-stabilized ZrO2 applied in practical fuel cells. Neutron diffraction data revealed the interesting thermally induced formation of oxygen vacancies at elevated temperatures, which triggered the transformation of the material from electronically conducting to purely and highly oxide ion-conducting. The VO4 tetrahedron with non-bridging terminal oxygen in K2ZnV2O7 was proved to be the key structural factor for transporting oxygen vacancies. The molecular dynamic simulation based on the interatomic potential approach revealed that long-range oxide ion diffusion was achieved by breaking and re-forming the 5-fold MO4 (M = Zn and V) tetrahedral rings. These findings enriched our knowledge of melilite and melilite-related materials, and creating oxygen vacancies in a melilite-related material may be a new strategy for developing novel oxide ion conductors.

Circularly Polarized Light-Dependent Pyro-Phototronic Effect from 2D Chiral-Polar Double Perovskites.

Chiral hybrid perovskites combine the advantages of chiral materials and halide perovskites, offering an ideal platform for the design of circularly polarized light (CPL) detectors. The pyro-phototronic effect, as a special mechanism of the photoexcited pyroelectric signal, can significantly improve the performance of photodetectors, whereas it remains a great challenge to achieve pyroelectricity-based CPL detection. In this work, the chiroptical phenomena and the pyro-phototronic effect are combined in chiral-polar perovskites to achieve unprecedented pyroelectric-based CPL detection. Two novel two-dimensional (2D) lead-free chiral-polar double perovskites, S/R-[(4-aminophenyl)ethylamine]2AgBiI8·0.5H2O, are successfully designed and synthesized by introducing chiral organic ligands into metal halide frameworks. Strikingly, the photoresponse is substantially boosted with the support of the pyro-phototronic effect, showing an increased pyro-phototronic current that is 40 times greater than the photovoltaic current. Furthermore, the pyroelectric-based detector possesses excellent CPL detection capacity to distinguish different polarization states of CPL photons, which achieve an impressive glph of up to 0.27 at zero bias. This study provides a brand new process for CPL detection by utilizing the pyro-phototronic effect in chiral-polar perovskites, which opens a new avenue for chiral materials in optoelectronic applications.

KCoO2-type layered nitrides Ca1-xEuxTiN2: structural stability, electrical properties and Eu coordination chemistry.

Eu2+ was used to substitute Ca in the orthorhombic KCoO2-type layered CaTiN2 to form a Ca1-xEuxTiN2 solid solution, which showed a limited substitution around x = 0.35 with the tetragonality enhanced but the orthorhombic symmetry retained and inaccessibility for the end member EuTiN2. This was in contrast with the full solid solution Ca1-xSrxTiN2, which realized a structural transition from orthorhombic to tetragonal at x = 0.5, even though Eu2+ and Sr2+ ions have similar sizes. The Eu substitution for Ca reduced the dielectric permittivity of CaTiN2 owing to the reduced structural distortion arising from the enhanced tetragonality with the substitution. First-principle theoretical calculations on the total energies and formation energies considering the 4f electrons of Eu ions and the related magnetism were performed to understand the structural stability of the hypothetical EuTiN2. Compared with CaTiN2 and SrTiN2, EuTiN2 has much higher formation energies, making it inaccessible at high temperature. The evolutions of the experimentally observed and calculated lattice parameters of the Ca1-xEuxTiN2 solid solution showed a preference for the orthorhombic phase over the tetragonal phase for the hypothetical EuTiN2, revealing a different coordination chemistry of Eu2+-N to Eu2+-O through the comparison of the structural variations of ATiN2 and ATiO3 (A = Ca, Sr, Eu).

The Structure of Terbium in the Ferromagnetic State.

Metals typically crystallize in highly symmetric structures due to their nondirectional and nonsaturated metallic bonds. Here, we report that terbium metal in its ferromagnetic state adopts an unusual low-symmetry orthorhombic structure with a Cmcm space group. A similar structure has been previously observed only in a few actinide metals with bonding 5f electrons at ambient pressure, such as uranium, neptunium, and plutonium, but with different nearest coordination numbers and bond-length variations. The Tb atom occupies the 4c site (0, ∼0.1661, 1/4), building up -[Tb-Tb]- layers stacking along the b-axis. Our first-principles many-body calculations of the crystal field splitting in the correlated Tb 4f-shell demonstrate that the Cmcm structure for ferromagnetic terbium is stabilized by magneto-elastic forces due to a secondary order of quadrupolar moments in the ferromagnetic state. These findings are significant for further understanding of the nature of terbium, including its electron structure, energy bands, phonons, and magnetism.

BaLa5V2O3N7: a novel anti-perovskite oxynitride for electrode applications.

The exploration of transition metal oxynitrides has garnered significant interest due to their intriguing property diversity. Herein, we present a promising new transition metal oxynitride BaLa5V2O3N7, which features an anti-perovskite structure type. This unique structural configuration endows the material with remarkable conductivity, particularly at low temperatures, paving the way for the material to be used in a wide range of technological applications.

Interplanar Ferromagnetism Enhanced Ultrawide Zero Thermal Expansion in Kagome Cubic Intermetallic (Zr,Nb)Fe2.

A cubic metal exhibiting zero thermal expansion (ZTE) over a wide temperature window demonstrates significant applications in a broad range of advanced technologies but is extremely rare in nature. Here, enabled by high-temperature synthesis, we realize tunable thermal expansion via magnetic doping in the class of kagome cubic (Fd-3m) intermetallic (Zr,Nb)Fe2. A remarkably isotropic ZTE is achieved with a negligible coefficient of thermal expansion (+0.47 × 10-6 K-1) from 4 to 425 K, almost wider than most ZTE in metals available. A combined in situ magnetization, neutron powder diffraction, and hyperfine Mössbauer spectrum analysis reveals that interplanar ferromagnetic ordering contributes to a large magnetic compensation for normal lattice contraction upon cooling. Trace Fe-doping introduces extra magnetic exchange interactions that distinctly enhance the ferromagnetism and magnetic ordering temperature, thus engendering such an ultrawide ZTE. This work presents a promising ZTE in kagome metallic materials.

Oxide Ion-Conducting Materials Containing Tetrahedral Moieties: Structures and Conduction Mechanisms.

This Review presents an overview from the perspective of tetrahedral chemistry on various oxide ion-conducting materials containing tetrahedral moieties which have received continuous growing attention as candidates for key components of various devices, including solid oxide fuel cells and oxygen sensors, due to the deformation and rotation flexibility of tetrahedral units facilitating oxide ion transport. Emphasis is placed on the structural and mechanistic features of various systems ranging from crystalline to amorphous materials, which include a variety of gallates, silicates, germanates, molybdates, tungstates, vanadates, aluminates, niobate, titanates, indium oxides, and the newly reported borates. They contain tetrahedral units in either isolated or linked manners forming different polyhedral dimensionality (0 to 3) with various defect properties and transport mechanisms. The development of oxide ion conductors containing tetrahedral moieties and the elucidation of the roles of tetrahedral units in oxide ion migration have demonstrated diverse opportunities for discovering superior electrolytes for solid oxide fuel cells and other related devices and provided useful clues for uncovering the key factors directing fast oxide ion conduction.

Strain-induced giant enhancement of anisotropic dielectric constant in layered nitrides SrHfN2 and SrZrN2.

The development of information technology puts forward huge demand for electronic materials with high dielectric constants; first-principles calculations and simulations have been demonstrated as an efficient technique for screening and exploring novel dielectric materials. In the present study, first-principles calculations combined with density functional perturbation theory are employed to study the dielectric properties of two newly discovered layered nitrides SrHfN2 and SrZrN2 under strain. By analyzing the evolution of lattice distortion, dielectric constant, Born effective charge, and phonon modes along with the applied strain, we find that the biaxial strain and isotropic strain can effectively modulate the dielectric constant. The two nitrides SrHfN2 and SrZrN2 are dynamically stable up to biaxial tensile strains of 2.1% and 1.8%, and the dielectric constants have been enlarged to about 500 and 2000. Furthermore, the dielectric constant is dramatically enhanced by 15 (9) times to a maximum value of ∼2600 (2700) under an isotropic tensile strain of 1.2% (0.7%) for SrHfN2 (SrZrN2), which is mainly due to the softening of the lowest-frequency infrared-active phonon mode and the increasing octahedral distortion degree. Particularly, the ionic contribution of the dielectric constant shows very remarkable anisotropy and plays a dominant role in the change of the dielectric constant, whose in-plane components exhibit giant enhancement by 18 (10) times for SrHfN2 (SrZrN2). This work not only sheds light on the experimentally observed high dielectric constants of SrHfN2 and SrZrN2, but also provides an effective route to regulate the anisotropic dielectric constants by applied strain, which indicates promising applications in optical and electronic devices.

Disentangling the Li-Ion transport and Boundary Phase Transition Processes in Li10 GeP2 S12 Electrolyte by In-Operando High-Pressure and High-Resolution NMR Spectroscopy.

Li-ion transport and phase transition of solid electrolytes are critical and fundamental issues governing the rate and cycling performances of solid-state batteries. In this work, in-operando high-pressure nuclear magnetic resonance (NMR) spectroscopy for the solid-state battery is developed and applied, in combination with 6 Li-tracer NMR and high-resolution NMR spectroscopy, to investigate the Li10 GeP2 S12 electrolyte under true-to-life operation conditions. The results reveal that the Li10 GeP2 S12 phase may become more disordered and a large amount of conductive metastable ß-Li3 PS4 as the glassy matrix in the electrolyte transforms into less conductive phases, mainly γ-Li3 PS4 , when high current densities (e.g., ≥0.5 mA cm-2 ) are applied to the electrolyte. The overall Li-transport also varies and shows a tendency of boundary phases and Li10 GeP2 S12 synergistic dominant conduction at high currents. Accordingly, a mechanism of structural change induced by stress variation due to the drastic morphological change during Li-In alloying at high currents, and the local Li+ diffusion coefficient discrepancy is proposed. These new findings of Li-ion transport and boundary phase transition in Li10 GeP2 S12 solid electrolyte under high-pressure and high current density are first reported and will help provide previously lacking insights into the relationship of structure and performance of Li10 GeP2 S12 .

Colossal Ionic Conductivity in Interphase Strain-Engineered Nanocomposite Films.

Owing to their wide application in oxide-based electrochemical and energy devices, ion conductors have attracted considerable attention. However, the ionic conductivity of the developed systems is still too low to satisfy the low-temperature application. In this study, by developing the emergent interphase strain engineering method, we achieve a colossal ionic conductivity in SrZrO3-xMgO nanocomposite films, which is over one order of magnitude higher than that of the currently widely used yttria-stabilized zirconia below 673 K. Atomic-scale electron microscopy studies ascribe this superior ionic conductivity to the periodically well-aligned SrZrO3 and MgO nanopillars that feature coherent interfaces. Wherein, a tensile strain as large as +1.7% is introduced into SrZrO3, expanding the c-lattice and distorting the oxygen octahedra to decrease the oxygen migration energy. Combining with theoretical assessments, we clarify the strain-dependent oxygen migration path and energy and unravel the mechanisms for strain-tuned ionic conductivity. This study provides a new scope for the property improvement of wide-range ion conductors by strain engineering.

Mixed electronic and oxide ionic conduction and migration mechanisms in digermanate La2-xCaxGe2O7-x/2.

Mixed electronic and oxide ionic conduction was enabled in digermanate-type La2-xCaxGe2O7-x/2 containing Ge3O10 chains and isolated GeO4 units by substitution of La3+ with Ca2+. The structure and solid solution limit of Ca doped La2Ge2O7 were studied by systematic experiments, including rotation electron diffraction (RED), X-ray diffraction (XRD) and neutron powder diffraction (NPD) experiments, etc. The preferred occupation of Ca2+ and oxygen vacancies was investigated by Rietveld analysis of the NPD data. The obtained conducting material La1.925Ca0.075Ge2O6.963 exhibits superior thermal stability and an order of magnitude improvement in conductivity compared to the parent La2Ge2O7 (∼9 × 10-5 S cm-1 at 1000 °C). BVEL calculations reveal that the oxygen vacancies were stabilized and transported within the framework of La2Ge2O7 by sharing oxygen and oxygen exchange between the adjacent Ge3O10 chains and GeO4 units, exhibiting a three-dimensional oxide ion transport nature.