Investigation of interactions between biological thiols and gold nanoparticles by capillary electrophoresis with laser-induced fluorescence.

Biological thiols spontaneously form a stable Au-S dative bond with gold nanoparticles (AuNP) that might be used for their selective extraction and enrichment in biological samples. In this work, interactions of selected biological thiols (glutathione, cysteine, homocysteine [Hcys], cysteamine [CA], and N-acetylcysteine) with AuNP stabilized by different capping agents (citrate, Tween 20, Brij 35, CTAB, SDS) were investigated by UV-Vis spectroscopy and capillary electrophoresis with laser-induced fluorescence. Spectrophotometric measurements showed aggregation of Hcys and CA with AuNP. In contrast, it was confirmed by CE-LIF that biological thiols were adsorbed to all types of AuNP. Citrate-capped AuNP were selected for AuNP-based extraction of biological thiols from exhaled breath condensate (EBC). Dithiothreitol was utilized for desorption of biological thiols from the AuNP surface, which was followed by derivatization with eosin-5-maleimide and CE-LIF analysis. AuNP-based extraction increased the sensitivity of CE-LIF analysis; however, further optimization of methodology is necessary for accurate quantification of biological thiols in EBC.

An open source 3D printed autosampler for capillary electrophoresis.

BACKGROUND: In-house built capillary electrophoresis (CE) systems represent a significant share of laboratory instrumentation. In most of these instruments, sample injection is effected manually with low to moderate precision and requires skilled operators. Although few automated samplers have been previously developed, typically only one sample at a time can be injected. If a series of samples is to be analyzed, manual intervention is required. In the present work, we developed and constructed a fully automated, open source, CE autosampler, able to handle up to 14 different samples that can be used as a modular component of any in-house built CE instrument. RESULTS: An inexpensive, 3D printed, open source, autosampler for CE was developed. The autosampler consists of two parts: an injection unit with carousel containing sample and electrolyte vials and a flushing unit, containing a miniature pressure/vacuum pump. The autosampler is operated by an Arduino Mega microcontroller and an Arduino code written in the laboratory. The injection sequence is entered through a keypad and LCD display by the user. The instrument can operate autonomously for extended periods of time. It was used for fully automated analysis and/or calibration of up to 14 samples with excellent injection repeatability reaching less than 2.7% RSD for peak areas. The sampler performance was tested with two independently built CE instruments, a CE system with contactless conductivity detection (C4D) and a CE system with laser induced fluorescence (LIF) detector. SIGNIFICANCE AND NOVELTY: A novel, 3D printed, Arduino-based autosampler for CE was developed. The autosampler allows autonomous hydrodynamic injection of up to 14 different samples with fully programmable injection sequence, including capillary flushing and high voltage and data acquisition control. It provides the missing instrumental sampling setup for laboratory made CE instruments. It can be simply constructed based on the open-source blueprints in any laboratory and be a useful and time-saving add-on to any modular CE instrument.

Use of metal nanoparticles for preconcentration and analysis of biological thiols.

Metal nanoparticles (NPs) exhibit several unique physicochemical properties, including redox activity, surface plasmon resonance, ability to quench fluorescence, biocompatibility, or a high surface-to-volume ratio. They are being increasingly used in analysis and preconcentration of thiol containing compounds, because they are able to spontaneously form a stable Au/Ag/Cu-S dative bond. They thus find wide application in environmental and particularly in medical science, especially in the analysis of biological thiols, the endogenous compounds that play a significant role in many biological systems. In this review article, we provide an overview of various types of NPs that have been applied in analysis and preconcentration of biological thiols, mainly in human biological fluids. We first discuss shortly the types of NPs and their synthesis, properties, and their ability to interact with thiol compounds. Then we outline the sample preconcentration and analysis methods that were used for this purpose with special emphasis on optical, electrochemical, and separation techniques.

Quantification and identification of bile acids in saliva by liquid chromatography-mass spectrometry: Possible non-invasive diagnostics of Barrett's esophagus?

Bile acids are a group of steroid compounds essential for lipid digestion. However, when bile acids are refluxed into the stomach and the esophagus, during the so called duodenogastroesophageal reflux, they can have a detrimental effect on the esophageal epithelium and cause pathological changes of esophageal tissue, e.g., Barrett's esophagus (BE). The levels of bile acids in saliva could therefore serve as possible biomarkers for the diagnostics of BE. In this work, we focused on optimization of sample collection and preparation by solid-phase extraction and subsequent quantification of 11 bile acids (unconjugated, glycine-conjugated) in saliva from healthy volunteers and BE patients by ultra-high-performance liquid chromatography coupled to triple-quadrupole tandem mass spectrometry. Moreover, high resolution MS (Orbitrap-MS) was utilized for identification of new bile acids in saliva. Methods for saliva collection including simple spitting and the Salivette® saliva collection system were compared; the latter was found to be unsuitable due to excessive retention of bile acids in the cotton swab. Methanol with 0.1% formic acid were selected for protein precipitation and bile acid extraction prior to SPE. Separation was performed in gradient elution of methanol and 0.1% formic acid in less than 10 min. Saliva from BE patients contained higher levels of almost all bile acids, and the tested groups could be distinguished by principal component analysis. In untargeted analysis by high resolution MS, taurine-conjugated bile acids and glycine-conjugated dihydroxy-bile acid sulfate were identified in saliva from healthy volunteers. We propose that analysis of salivary bile acids including taurine conjugates could be applicable in diagnostics of BE, following a larger clinical study.

A novel temperature-controlled open source microcontroller based sampler for collection of exhaled breath condensate in point-of-care diagnostics.

Exhaled breath condensate (EBC) is an attractive, non-invasive sample for clinical diagnostics. During EBC collection, its composition is influenced by the collection temperature, a factor that is often not thoroughly monitored and controlled. In this study, we assembled a novel, simple, portable, and inexpensive device for EBC collection, able to maintain a stable temperature at any value between -7 °C and +12 °C. The temperature was controlled using a microcontroller and a thermoelectric cooler that was employed to cool the aluminum block holding the glass tube or the polypropylene syringe. The performance of the novel sampler was compared with the passively cooled RTube™ and a simple EBC sampler, in which the temperature was steadily increasing during sampling. The developed sampler was able to maintain a stable temperature within ±1 °C. To investigate the influence of different sampling temperatures (i.e., +12, -7, -80 °C) on the analyte content in EBC, inorganic ions and organic acids were analyzed by capillary electrophoresis with a capacitively coupled contactless conductivity detector. It was shown that the concentration of metabolites decreased significantly with decreasing temperature. The portability and the ability to keep a stable temperature during EBC sampling makes the developed sampler suitable for point-of-care diagnostics.

Development of CE-C4D Method for Determination Tropane Alkaloids.

A fast method for the determination of tropane alkaloids, using a portable CE instrument with a capacitively coupled contactless conductivity detector (CE-C4D) was developed and validated for determination of atropine and scopolamine in seeds from Solanaceae family plants. Separation was obtained within 5 min, using an optimized background electrolyte consisting of 0.5 M acetic acid with 0.25% (w/v) ß-CD. The limit of detection and quantification was 0.5 µg/mL and 1.5 µg/mL, respectively, for both atropine and scopolamine. The developed method was validated with the following parameters-precision (CV): 1.07-2.08%, accuracy of the assay (recovery, RE): 101.0-102.7% and matrix effect (ME): 92.99-94.23%. Moreover, the optimized CE-C4D method was applied to the analysis of plant extracts and pharmaceuticals, proving its applicability and accuracy.

Sub-Minute Analysis of Lactate from a Single Blood Drop Using Capillary Electrophoresis with Contactless Conductivity Detection in Monitoring of Athlete Performance.

A simple and fast method for the analysis of lactate from a single drop of blood was developed. The finger-prick whole blood sample (10 µL) was diluted (1:20) with a 7% (w/v) solution of [tris(hydroxymethyl)methylamino] propanesulfonic acid and applied to a blood plasma separation device. The device accommodates a membrane sandwich composed of an asymmetric polysulfone membrane and a supporting textile membrane that allows the collection of blood plasma into a narrow glass capillary in less than 20 s. Separated and simultaneously diluted blood plasma was directly injected into a capillary electrophoresis instrument with a contactless conductivity detector (CE-C4D) and analyzed in less than one minute. A separation electrolyte consisted of 10 mmol/L l-histidine, 15 mmol/L dl-glutamic acid, and 30 µmol/L cetyltrimethylammonium bromide. The whole procedure starting from the finger-prick sampling until the CE-C4D analysis was finished, took less than 5 min and was suitable for monitoring lactate increase in blood plasma during incremental cycling exercise. The observed lactate increase during the experiments measured by the developed CE-C4D method correlated well with the results from a hand-held lactate analyzer (R = 0.9882). The advantage of the developed CE method is the speed, significant savings per analysis, and the possibility to analyze other compounds from blood plasma.

High-resolution Arduino-based data acquisition devices for microscale separation systems.

In this work, we have designed, constructed, and evaluated simple, inexpensive open-source data acquisition systems based on various analog-to-digital converter modules (ADS 1115, MCP 3424, LTC 2400, with resolution from 16 to 24-bit) and a miniature Arduino Nano ™ microcontroller. The constructed data acquisition systems provide excellent performance and are comparable to a commercial, 24-bit device. We provide full schematics and corresponding source codes so that analytical chemists can easily construct any of the developed systems without extensive electronic or programming knowledge. The 24-bit LTC 2400 based device provided the best and comparable performance to a commercial, high-end 24-bit sigma to delta converter (ORCA 2800) at a fraction of cost (less than 50 USD compared to 870 USD for the commercial counterpart). The excellent performance was verified using a capillary electrophoresis system with contactless conductivity detection and separation of inorganic ions in clinical skin wipe and tap water samples.

Analysis of bile acids in human biological samples by microcolumn separation techniques: A review.

Bile acids are a group of compounds essential for lipid digestion and absorption with a steroid skeleton and a carboxylate side chain usually conjugated to glycine or taurine. Bile acids are regulatory molecules for a number of metabolic processes and can be used as biomarkers of various disorders. Since the middle of the twentieth century, the detection of bile acids has evolved from simple qualitative analysis to accurate quantification in complicated mixtures. Advanced methods are required to characterize and quantify individual bile acids in these mixtures. This article overviews the literature from the last two decades (2000-2020) and focuses on bile acid analysis in various human biological samples. The methods for sample preparation, including the sample treatment of conventional (blood plasma, blood serum, and urine) and unconventional samples (bile, saliva, duodenal/gastric juice, feces, etc.) are shortly discussed. Eventually, the focus is on novel analytical approaches and methods for each particular biological sample, providing an overview of the microcolumn separation techniques, such as high-performance liquid chromatography, gas chromatography, and capillary electrophoresis, used in their analysis. This is followed by a discussion on selected clinical applications.

Analysis of major bile acids in saliva samples of patients with Barrett's esophagus using high-performance liquid chromatography-electrospray ionization-mass spectrometry.

A fast, non-invasive, high-performance liquid chromatographic screening method with electrospray ionization mass spectrometric detection was developed for the analysis of three major glycine-conjugated bile acids in human saliva. Using a mobile phase composed of 80% methanol and 0.1% formic acid, glycocholic, glycodeoxycholic, and glycochenodeoxycholic acids were separated in less than 4 minutes with sensitivity in the low nM range. Bile acids are thought to contribute to the pathology of various complications in gastroesophageal reflux disease, for instance, Barrett's esophagus, which may eventually lead to esophageal carcinoma. In this pilot study, samples of saliva obtained from 15 patients with Barrett's esophagus of various severities were compared to saliva samples from 10 healthy volunteers. Glycochenodeoxycholic acid was significantly elevated in the patients and principal component analysis of all bile acids could distinguish the most severe Barrett's esophagus patients. We also reported on the detection of glycochenodeoxycholic acid in exhaled breath condensate for the first time. The promising results of this pilot study warrant future investigation, aiming at non-invasive diagnostics of Barrett's esophagus susceptibility in patients with gastroesophageal reflux disease.

Skin wipe test: A simple, inexpensive, and fast approach in the diagnosis of cystic fibrosis.

OBJECTIVE: To assess the performance of a newly developed skin wipe test (SWT) for the diagnosis of cystic fibrosis (CF). STUDY DESIGN: Spontaneously formed sweat from the forearm was wiped by a cotton swab moistened with 100 µL of deionized (DI) water and extracted into 400 µL of DI water (SWT). The conventional Macroduct sweat test (ST) was performed simultaneously. SWT samples of 114 CF patients, 76 healthy carriers, and 58 controls were analyzed by capillary electrophoresis with contactless conductivity detection and Cl- /K+ and (Cl- + Na+ )/K+ ion ratios were evaluated. Chloride concentrations from Macroduct ST were analyzed coulometrically. RESULTS: Analysis of 248 SWT samples and simultaneous Macroduct ST samples showed comparable method performance. Two ion ratios, Cl- /K+ and (Cl- + Na+ )/K+ , from the SWT samples and Cl- values from the ST samples were evaluated to diagnose CF. Sensitivity of the SWT method using the Cl- /K+ ratio (cutoff value 3.9) was 93.9%, compared to 99.1% when using the (Cl- + Na+ )/K+ ratio (cutoff value 5.0) and 98.3% in using Macroduct Cl- (cutoff value higher or equal to 60 mmol/L). The methods' specificities were 97.8%, 94.0%, and 100.0%, respectively. CONCLUSIONS: The developed SWT method with capillary electrophoretic analysis for CF diagnosis performs comparably to the conventional Macroduct ST. The SWT method is simple, fast, inexpensive, and completely noninvasive. Use of an ion ratio in obtained SWT samples is proposed as a new diagnostic parameter that shows significant promise in CF diagnostics.

Analysis of bicarbonate, phosphate and other anions in saliva by capillary electrophoresis with capacitively coupled contactless conductivity detection in diagnostics of gastroesophageal reflux disease.

Bicarbonate and phosphate constitute major salivary buffering components, and their importance consists in the neutralization of acidic gastric contents during reflux episodes. In this work, capillary electrophoresis with capacitively coupled contactless conductivity detector was applied for the analysis of bicarbonate, phosphate, and another inorganic (chloride, nitrite, nitrate, sulfate, thiocyanate) and organic anions (acetate, butyrate) to evaluate their levels in saliva. The background electrolytes of different composition and pH between 6.02-9.41 were assessed for the bicarbonate and phosphate determination by comparison of the real analyses of a model solution with the simulation by PeakMaster software. The optimized background electrolyte was composed of 10 mM 2-(N-morpholino)ethanesulfonic acid, 20 mM arginine, and 30 µM cetyltrimethylammonium bromide, pH 8.95. Using this BGE, the anion levels were compared in saliva from 20 patients suffering from gastroesophageal reflux disease (GERD) and saliva from 12 healthy subjects. Bicarbonate levels were significantly elevated in saliva from GERD patients suggesting the possible applicability of bicarbonate as a biomarker in non-invasive diagnostics of GERD by CE-C4 D.

Capillary electrophoretic analysis of ionic content in exhaled breath condensate and pH monitoring as a non-invasive method in gastroesophageal reflux disease diagnostics.

In this study, the ionic profile and pH of exhaled breath condensate (EBC) in a group of patients with acid and weakly acid reflux and no-reflux controls were compared. A portable sampler was used for non-invasive EBC collection from five exhalations. The ionic profile (anions, cations, organic acids) and pH of the collected EBC samples were measured by capillary electrophoresis with contactless conductivity detection and a pH microelectrode, respectively. Several ions were elevated in the patient groups. Sodium cation was elevated in weakly acid reflux (significance level p < 0.01) and acid reflux (p < 0.05) compared to no-reflux controls. Butyrate and propionate were elevated in both acid reflux and weakly acid reflux compared to no-reflux controls (butyrate: p < 0.01, propionate: p < 0.05). The median values of pH (after de-aeration with N2) were also significantly higher (p < 0.01) in groups with acid reflux and weakly acid reflux than in the control group with no reflux. The ionic analysis and simultaneous pH measurement offer a simple, cheap, fast, and non-invasive approach in gastroesophageal reflux disease diagnostics.

Capillary electrophoresis of small ions and molecules in less conventional human body fluid samples: A review.

In recent years, advances in sensitive analytical techniques have encouraged the analysis of various compounds in biological fluids. While blood serum, blood plasma and urine still remain the golden standards in clinical, toxicological and forensic science, analyses of other body fluids, such as breast milk, exhaled breath condensate, sweat, saliva, amniotic fluid, cerebrospinal fluid, or capillary blood in form of dried blood spots are becoming more popular. This review article focuses on capillary electrophoresis and microchip electrophoresis of small ions and molecules (e.g. inorganic cations/anions, basic/acidic drugs, small acids/bases, amino acids, peptides and other low molecular weight analytes) in various less conventional human body fluids and hopes to stimulate further interest in the field.

Optimization of background electrolyte composition for simultaneous contactless conductivity and fluorescence detection in capillary electrophoresis of biological samples.

In this article, optimization of BGE for simultaneous separation of inorganic ions, organic acids, and glutathione using dual C4 D-LIF detection in capillary electrophoresis is presented. The optimized BGE consisted of 30 mM 2-[4-(2-hydroxyethyl)piperazin-1-yl]ethanesulfonic acid, 15 mM 2-amino-2-hydroxymethyl-propane-1,3-diol, and 2 mM 18-crown-6 at pH 7.2 and allowed simultaneous separation of ten inorganic anions and cations, three organic acids and glutathione in 20 min. The samples were injected hydrodynamically from both capillary ends using the double-opposite end injection principle. Sensitive detection of anions, cations, and organic acids with micromolar LODs using C4 D and simultaneously glutathione with nanomolar LODs using LIF was achieved in a single run. The developed BGE may be useful in analyses of biological samples containing analytes with differing concentrations of several orders of magnitude that is not possible with single detection mode.

Evaluation of Important Analytical Parameters of the Peptest Immunoassay that Limit its Use in Diagnosing Gastroesophageal Reflux Disease.

GOAL: To evaluate the analytical parameters of a lateral flow (LF) pepsin immunoassay (Peptest) and assess its suitability in the diagnostics of gastroesophageal reflux disease (GERD). BACKGROUND: Peptest is a noninvasive assay to analyze pepsin in saliva, intended for use in GERD diagnostics. Although commercialized, fundamental studies on its performance are missing. The assay therefore requires basic analytical parameter evaluation to assess its suitability in clinical practice. STUDY: Assay reaction's time dependence, reader device repeatability, and individual LF devices and longitudinal pepsin concentration reproducibility in individual subjects was evaluated. Salivary pepsin was analyzed in 32 GERD patients with extraesophageal reflux symptoms and 13 healthy individuals. RESULTS: The assay's signal increase is not completed at the recommend readout time and continues to increase for another 25 minutes. The relative standard deviation of measurement was good when using the same LF device, ranging from 2.3% to 12.9%, but the reproducibility of 10 different individual LF devices was poor. The random error when analyzing the same saliva sample on 10 LF devices was as high as 36 ng/mL and this value is thus suggested as the positivity cut-off. Pepsin concentration in individual subjects during a 10-day period varied significantly. The sensitivity of the Peptest was 36.8% in the group with acid reflux and 23.1% in the group with weakly acid reflux. The specificity was 61.5%. CONCLUSIONS: The Peptest assay's sensitivity and specificity is low, the results are highly variable and it should not be used as a near-patient diagnostic method in primary care.

Open source capillary electrophoresis.

Open source paradigm is becoming widely accepted in scientific communities and open source hardware is finding its steady place in chemistry research. In this review article, we provide the reader with the most up-to-date information on open source hardware and software resources enabling the construction and utilization of an "open source capillary electrophoresis instrument". While CE is still underused as a separation technique, it offers unique flexibility, low-cost, and high efficiency and is particularly suitable for open source instrumental development. We overview the major parts of CE instruments, such as high voltage power supplies, detectors, data acquisition systems, and CE software resources with emphasis on availability of the open source information on the web and in the scientific literature. This review is the first of its kind, revealing accessible blueprints of most parts from which a fully functional open source CE system can be built. By collecting the extensive information on open source capillary electrophoresis in this review article, the authors aim at facilitating the dissemination of knowledge on CE within and outside the scientific community, fosters innovation and inspire other researchers to improve the shared CE blueprints.

Fast blood plasma separation device for point-of-care applications.

In this work, a simple device for extremely fast separation of blood plasma from diluted whole blood was developed. The device accommodates an asymmetric polysulfone membrane/supporting membrane sandwich that allows collection of 10 µL blood plasma into a narrow glass capillary in less than 10 s. The composition of diluent solution was optimized in order to achieve maximum recoveries for selected metabolites of alcohol intoxication. 5% solution of [tris(hydroxymethyl)methylamino] propanesulfonic acid provided recoveries of formate, oxalate and glycolate close to 100% and only moderate erythrocyte lysis. Both charged and uncharged compounds from the whole blood samples can be analyzed in the separated blood plasma by capillary electrophoresis with contactless conductometric detection and spectrophotometry, respectively. The developed device might find wide application in on-site testing and point-of-care analysis, when only microliter volumes of whole blood are available.

Non-aqueous capillary electrophoretic separation of cholesterol and 25-hydroxycholesterol after derivatization with Girard P reagent.

Capillary electrophoresis (CE) can provide high separation efficiency with very simple instrumentation, but has yet to be explored regarding oxysterols/cholesterol. Cholesterol and 25-hydroxycholesterol (both are 4-ene-3-ketosteroids) were quantitatively transformed into hydrazones using Girard P reagent after enzymatic oxidation by cholesterol oxidase. Separation was achieved using non-aqueous capillary electrophoresis with UV detection at 280nm; the "charge-tagging" Girard P reagent ensured both charge and chromophore (which are requirements for CE-UV). Excess reagent was also separated from the two analytes, eliminating the need for removal prior to the analysis. The compounds were separated in less than 5min with excellent separation efficiency, using separation electrolytes fully compatible with mass spectrometry. The CE-UV method was used to optimize steps for charge-tagging, revealing that the procedure is affected by the analyte/reagent ratio and reaction time, but also the analyte structure.

Sensitive determination of malondialdehyde in exhaled breath condensate and biological fluids by capillary electrophoresis with laser induced fluorescence detection.

In this work, a sensitive capillary electrophoresis method with laser induced fluorescence detection for determination of malondialdehyde in various biological fluids was developed. Malondialdehyde reacts with thiobarbituric acid under optimized conditions of pH=2, reaction time of 60min and temperature of 90°C, yielding an adduct that can be separated in a 50mM sodium borate background electrolyte at pH 9. The separation of the formed adduct was accomplished in less than 6min with limit of detection of 1.1nM due to the use of 532nm laser module, exactly matching the maximum excitation wavelength of the formed adduct. The developed method offers unprecedented sensitivity and was for the first time used for analysis of malondialdehyde in exhaled breath condensate. The method proved to be also applicable to other samples of biological fluids, such as blood plasma and saliva.