Critical Behaviors of van Der Waals Itinerant Ferromagnet Fe3.8GaTe2.

The critical behavior of the van der Waals ferromagnet Fe3.8GaTe2was systematically studied through measurements of isothermal magnetization, with the magnetic field applied along thec-axis. Fe3.8GaTe2undergoes a non-continuous paramagnetic to ferromagnetic phase transition at the Curie temperatureTc∼355K. A comprehensive analysis of isotherms aroundTcutilizing the modified Arrott diagram, the Kouvel-Fisher method, the Widom scaling law, and the critical isotherm analysis yielded the critical exponent ofß=0.411,γ=1.246, andδ=3.99. These critical exponents are found to be self-consistent and align well with the scaling equation at high magnetic fields, underscoring the reliability and intrinsic nature of these parameters. However, the low-field data deviates from the scaling relation, exhibiting a vertical trend whenT

Optimization and modelling of magnesium oxide (MgO) photocatalytic degradation of binary dyes using response surface methodology.

Textile industry dye effluent contains a mixture of different kinds of dyes. Many times, photocatalysis is targeted as a solution for the treatment of dye effluent from the textile industry. Many researches have been published related to the photocatalysis of single textile dyes but in the real-world scenario, effluent is a mixture of dyes. Magnesium oxide (MgO) is used as a photocatalyst to treat a mixture (binary solution) of Methylene blue (MB) and Methylene violet (MV) along with individual MB and MV dyes in this article. MgO shows remarkable photocatalytic activity at about 93 and 88% for MB and MV dye in binary solution within 135 min. Furthermore, to study the influence of process parameters, experiments are designed with the help of the central composite design (CCD), and Response surface methodology (RSM) is used to study the interactions between parameters. For this study, five parameters are selected i.e., Photocatalyst dosage, initial concentration of both dyes, time of exposure to the light source, and pH of the binary solution. The photocatalytic process is also optimized and finally optimization of process parameters is validated with an experiment. The result of the validation experiment is very close to the predicted photocatalytic activity.

CRISPR-Based Therapies: Revolutionizing Drug Development and Precision Medicine.

With the discovery of CRISPR-Cas9, drug development and precision medicine have undergone a major change. This review article looks at the new ways that CRISPR-based therapies are being used and how they are changing the way medicine is done. CRISPR technology's ability to precisely and flexibly edit genes has opened up new ways to find, validate, and develop drug targets. Also, it has made way for personalized gene therapies, precise gene editing, and advanced screening techniques, all of which hold great promise for treating a wide range of diseases. In this article, we look at the latest research and clinical trials that show how CRISPR could be used to treat genetic diseases, cancer, infectious diseases, and other hard-to-treat conditions. However, ethical issues and problems with regulations are also discussed in relation to CRISPR-based therapies, which shows how important it is to use them safely and responsibly. As CRISPR continues to change how drugs are made and used, this review shines a light on the amazing things that have been done and what the future might hold in this rapidly changing field.

Anisotropic properties of two-dimensional (2D) tin dihalide (SnX2, X = Cl, Br, I) monolayer binary materials.

This paper investigated the electronic properties and photoresponse of two-dimensional SnX2(X = Cl, Br, I) monolayer binary materials using computational techniques. The calculated band structure and density of states indicate that these are large band gap semiconducting materials with an indirect band gap. The studied chemical bonding mechanism shows the existence of the hybrid bonding of ionic and covalent bonds in these dihalide materials. The valence band (VB) and conduction band (CB) edge positions are also estimated, using the concept of electronegativity and band gap, to investigate the photocatalytic activity of SnX2. Next, we investigated the polarization and energy-dependent dielectric and optical functions along the crystallographic axes of these materials in the linear response approach of the perturbing incident oscillating light field. These materials exhibit an anisotropic behavior of these functions, especially in the high-energy visible and low-energy ultraviolet (UV) regions. The absorption of incident light photons is very fast in SnI2than SnBr2and SnCl2in the low-energy UV region. It demonstrates the higher absorption coefficient and optical conductivity in Snl2. The obtained average static refractive index of SnCl2is comparable to that of glass (1.5), showing its application as transparent material. The low reflection coefficient, less than 20%, makes them superior for antireflection coating materials in the infrared and visible regions. The prominent energy loss peaks show the existence of plasmon resonances in these materials. The most of losses occur in the UV region. The investigated electronic and photoresponse properties indicate that these Sn-based dihalide materials are excellent for electronic devices and optoelectronic applications. Also, the calculated VB and CB edge positions with respect to the normal hydrogen electrode show the favorable water-splitting capability of these materials.

Temperature-Dependent Intensity Modulated Two-Photon Excited Fluorescence Microscopy for High Resolution Mapping of Charge Carrier Dynamics.

We present a temperature-dependent intensity modulated two-photon excited fluorescence microscopy technique that enables high-resolution quantitative mapping of charge carrier dynamics in perovskite microcrystal film. By disentangling the emission into harmonics of the excitation modulation frequency, we analyze the first and second order charge carrier recombination processes, including potential accumulation effects. Our approach allows for a quantitative comparison of different emission channels at a micrometer resolution. To demonstrate the effectiveness of the method, we applied it to a methylammonium lead bromide perovskite microcrystal film. We investigated the temperature-dependent modulated imaging, encompassing the exciton dissociation-association and charge carrier trapping-detrapping equilibrium. Additionally, we explored the potential freezing out of traps and the phase transition occurring at low temperatures.

Lipid-Polymer Hybrid Nanosystems: A Rational Fusion for Advanced Therapeutic Delivery.

Lipid nanoparticles (LNPs) are spherical vesicles composed of ionizable lipids that are neutral at physiological pH. Despite their benefits, unmodified LNP drug delivery systems have substantial drawbacks, including a lack of targeted selectivity, a short blood circulation period, and in vivo instability. lipid-polymer hybrid nanoparticles (LPHNPs) are the next generation of nanoparticles, having the combined benefits of polymeric nanoparticles and liposomes. LPHNPs are being prepared from both natural and synthetic polymers with various techniques, including one- or two-step methods, emulsification solvent evaporation (ESE) method, and the nanoprecipitation method. Varieties of LPHNPs, including monolithic hybrid nanoparticles, core-shell nanoparticles, hollow core-shell nanoparticles, biomimetic lipid-polymer hybrid nanoparticles, and polymer-caged liposomes, have been investigated for various drug delivery applications. However, core-shell nanoparticles having a polymeric core surrounded by a highly biocompatible lipid shell are the most commonly explored LPHNPs for the treatment of various diseases. In this review, we will shed light on the composition, methods of preparation, classification, surface functionalization, release mechanism, advantages and disadvantages, patents, and clinical trials of LPHNPs, with an emphasis on core-shell-structured LPHNPs.

Fractional order mathematical model for B.1.1.529 SARS-Cov-2 Omicron variant with quarantine and vaccination.

In this paper, a fractional order nonlinear model for Omicron, known as B.1.1.529 SARS-Cov-2 variant, is proposed. The COVID-19 vaccine and quarantine are inserted to ensure the safety of host population in the model. The fundamentals of positivity and boundedness of the model solution are simulated. The reproduction number is estimated to determine whether or not the epidemic will spread further in Tamilnadu, India. Real Omicron variant pandemic data from Tamilnadu, India, are validated. The fractional-order generalization of the proposed model, along with real data-based numerical simulations, is the novelty of this study.

Genetic group and swim-up processing affect SYBR Green real-time PCR-based porcine semen sex ratio in Landrace and its crossbred boars.

Determination of factors affecting sex ratio is important while considering application of sex ratio enrichment approach. Present study aimed to design a SYBR Green qPCR-based method for measurement of primary sex ratio and to evaluate different factors (genetic group, sire, spermiogenic cycle and processing layer) affecting boar sperm sex ratio. The qPCR was based on relative copy number analysis of sex chromosome-specific single copy gene fragments with an autosomal gene as reference and was evaluated using DNA dilution series from pigs with numerically normal karyotype. The sex ratio was estimated from genomic DNA samples isolated from boar semen collected from different genetic groups at different time points and different processing layers. The X chromosome frequencies of semen samples revealed significant effect of genetic group. However, significant variation was observed neither within same genetic group nor between ejaculates of different spermatogenic cycles. Among the processing techniques studied, swim-up technique produced a significant X sperm enrichment in comparison to control whereas, Percoll density gradient failed to show any significant difference among layers. The lower layer in swim-up technique was found to contain higher proportion of X sperms. The designed qPCR is found to be an easy, less time-consuming method and does not require high end laboratory facilities or the specialized expertise. The lower layer of swim-up processing has a scope for X sperm enrichment in boar semen with proper validation.

Experimental study on a bending type soft pneumatic actuator for minimizing the ballooning using chamber-reinforcement.

Soft robotics is an emerging area of research due to its safe interaction with humans; it also has exciting applications, such as wearable soft medical devices for rehabilitation, prosthetics, etc. Soft robots require soft actuators for performing desired movements, including bending, expansion, contraction, and twisting. This work focuses on bending-type multi-chambered extra-soft actuators actuated by pneumatic pressure. The corrugated design of a multi-chambered soft pneumatic actuator (SPA) is analyzed experimentally to observe the radial, longitudinal, and lateral expansions of different chambers, i.e., ballooning of the chambers under the application of air pressure. From the experimental study, it is observed that the ballooning mainly occurs at the free end of the actuator in a cantilever-type boundary condition, which could not be demonstrated by the computational solution using the finite element analysis (FEA). Moreover, it is observed that the effect of ballooning also disturbs the constant curvature profile of SPA. Therefore, a chamber-reinforcement solution is provided for minimizing the ballooning and ensuring the uniform bending of a SPA.

Optical and dielectric response of two-dimensional WX2 (X = Cl, O, S, Se, Te) monolayers: A comprehensive study based on density functional theory.

Here, we study the dielectric and optical properties of two-dimensional (2D) WX2 monolayers, where X is Cl, O, S, Se, and Te. First principle electronic band structure calculations reveal that all materials are direct band gap semiconductors except WO2 and WCl2 , which are found to be indirect band gap semiconducting 2D materials. The dielectric response of these materials is also systematically investigated. The obtained results suggest that these materials are suitable as dielectric materials to suppress unwanted signal noise. The optical properties of these 2D materials, such as absorption, reflection and extinction coefficients, refractive index, and optical conductivity, are also calculated from the dielectric function. It is found that these materials exhibit excellent optical response. The present electronic, dielectric, and optical findings indicate that WX2 monolayers have an opportunity in electronic, optical, and optoelectronic device applications.

Effect of Poling on Photocatalysis, Piezocatalysis, and Photo-Piezo Catalysis Performance of BaBi4Ti4O15 Ceramics.

This study focuses on analyzing the poling effect of BaBi4Ti4O15 (BBT) on the basis of photo and piezo-catalysis performance. BBT powder is prepared via a solid state reaction followed by calcination at 950 °C for 4 h. BBT is characterized by an X-ray diffractometer, scanning electron microscopy, Raman spectroscopy, and X-ray photoelectron spectroscopy. The optical bandgap of BBT is evaluated with the help of Tauc's plot and found to be 3.29 eV, which comes in the photon energy range of ultra-violet radiation. BBT powder is poled by using Corona poling in the presence of 2 kV mm-1 of electric field. An aqueous solution of methyl blue (MB) dye in the presence of UV radiation is used to evaluate the photo/piezocatalysis performance. Photocatalysis, piezocatalysis, and photo-piezo catalysis degradation efficiencies of poled and unpoled BBT powder are tested for 120 min of UV light irradiation. Photo-piezocatalysis shows degradation efficiencies of 62% and 40% for poled and unpoled BBT powder, respectively. Poling of BBT powder shows significant enhancement in degradation performance of MB dye in aqueous solution. Scavenger tests are also performed to identify reactive species.

Recent advances in ZnO nanostructure as a gas-sensing element for an acetone sensor: a short review.

Air pollution is a severe concern globally as it disturbs the health conditions of living beings and the environment because of the discharge of acetone molecules. Metal oxide semiconductor (MOS) nanomaterials are crucial for developing efficient sensors because of their outstanding chemical and physical properties, empowering the inclusive developments in gas sensor productivity. This review presents the ZnO nanostructure state of the art and notable growth, and their structural, morphological, electronic, optical, and acetone-sensing properties. The key parameters, such as response, gas detection limit, sensitivity, reproducibility, response and recovery time, selectivity, and stability of the acetone sensor, have been discussed. Furthermore, gas-sensing mechanism models based on MOS for acetone sensing are reported and discussed. Finally, future possibilities and challenges for MOS (ZnO)-based gas sensors for acetone detection have also been explored.

Optical band gap enhancements of chemically synthesized α-Ni(OH)2 nanoparticles by a novel technique: Precipitator molarity variation.

Nickel hydroxide nanoparticles (NHNPs) are extremely important semiconducting materials for applications in energy storage and energy harvesting devices. This study uses a novel variation in molarity of the sodium hydroxide (NaOH) precipitator solution to enhance the direct optical band gap in the NHNPs chemically synthesized by using nickel nitrate hexahydrate (Ni(NO3 )2 ·6H2 O) as the precursor. The simple, energy benign chemical precipitation route involved the usage of 1 M (Ni(NO3 )2 ·6H2 O) solutions as the precursor and 0.4 M, 0.6 M, and 0.8 M NaOH solutions as the precipitator solutions. The simple variation in precipitator molarity induces an increase in pH from about 6.9 to 7.5 of the reactant solution. As the molarity of the precursor solution does not change, the change in pH of the reactant solution is equivalent to the change in the pH of the precipitator solution. The NHNPs characterized by X-ray diffraction (XRD), field emission scanning electron microscopy (FESEM), dynamic light scattering (DLS), Fourier-transform infrared (FTIR) and ultraviolet-visible (UV-vis) techniques confirm a reduction of the nanocrystallite size from about 6.8 to 4.5 nm with a concomitant enhancement in the direct optical band gap energy from about 2.64 to 2.74 eV. The possible mechanisms that could be operative behind obtaining microstructurally tuned (MT)-NHNPs and band gap engineering (BGE) of the MT-NHNPs are discussed from both theoretical and physical process perspectives. Further, the implications of these novel results for possible future applications are briefly touched upon. The reported results might be useful to assess the material as an active electrode to improve the performance of batteries.

Role of fractional derivatives in the mathematical modeling of the transmission of Chlamydia in the United States from 1989 to 2019.

Nowadays, the mathematical modeling of infectious diseases is a big trend worldwide. The mathematical models help us to forecast future outbreaks of diseases in the presence of present data. In this article, we represent a model of the transmission of Chlamydia in the United States by using data from 1989 to 2019. In the formulation of the model, we used integer and fractional derivatives. Several graphs are plotted for the various possible cases of the given parameters. The aim of this paper is to justify how the mathematical models in terms of fractional derivatives have more degree of freedom to explore disease dynamics for a particular data set and capture memory effects. The separate parameter estimation for each value of the fractional order increases the novelty of this work. The use of a real-data set of Chlamydia in the United States makes this study more visible and important to the literature.

A comprehensive study on the electronic structure, dielectric and optical properties of alkali-earth metals and transition metal hydroxides M(OH)2.

In the present work, the physical properties of alkali-earth metal and transition metal hydroxides are comprehensively investigated using the density functional theory. Here, the alkali-earth metals Ca, Mg, and transition metals Cd, Zn are considered from the II-A and II-B groups in the periodic table of elements. The first principle electronic structure calculations show that these bulk hydroxide materials are direct band gap material. Ca(OH)2 and Mg(OH)2 exhibit an insulating behavior with a very large band gap. However, Cd(OH)2 and Zn(OH)2 are found to be wide band gap semiconductors. The dielectric and optical studies reveal that these materials have a high degree of anisotropy. Hence, the light propagation in these materials behaves differently in the direction perpendicular and parallel to the optical axis, and exhibits birefringence. Therefore, these materials may be useful for optical communication. The calculated electron energy loss suggests that these materials can also be used for unwanted signal noise suppression. The wide band gap makes them useful for high-power applications. Moreover, Ca(OH)2 and Mg(OH)2 are found to be suitable for dielectric medium.

Microstructural tuning and band gap engineering of calcium hydroxides: a novel approach by pH variation.

Here we report a simple, inexpensive, energy benign, yet novel pH-driven chemical precipitation technique to achieve microstructural and band gap engineering of calcium hydroxide nanoparticles (CHNPs). The chemical precipitation route involved the use of 0.4-1.6 M Ca(NO3 )2 .4H2 O solutions as the precursor and 1 M NaOH solution as the precipitator. The simple variation in precursor molarity induces a pH change from about 12.4 to 11.3 in the reactant solution. The CHNPs characterized by X-ray diffraction (XRD), field emission scanning electron microscopy (FESEM), Fourier transform infrared spectroscopy (FTIR), dynamic light scattering (DLS), and ultraviolet-visible (UV-Vis) spectroscopy techniques confirm a jump of nanocrystallite size from ~50-70 nm with a concomitant reduction of direct optical band gap energy from ~5.38-5.26 eV. The possible mechanisms that could be operative behind obtaining microstructurally tuned (MT)-CHNPS and band gap engineering (BGE) are discussed from both theoretical and physical process perspectives. Furthermore, the implications of these novel results for possible futuristic applications are briefly hinted upon.

Electronic and optical properties of Nb/V-doped WS2 monolayer: A first-principles study.

The electronic, dielectric, and optical properties of pure and Nb/V-doped WS2 monolayer are being investigated using the first-principles density functional theory (DFT). The electronic band structure calculations reveal that the pure and doped WS2 monolayer is a direct band gap semiconductor. It is seen that the doping not only slightly reduces the band gap but also changes the n-type character of pure WS2 monolayer to the p-type character. Hence, it may be useful for channel material in field effect transistors (FETs). Moreover, the optical studies reveal that the WS2 monolayer shows a significantly good optical response. However, a small ultraviolet shift is observed in the optical response of the doped case compared to the pristine WS2 monolayer. This study suggests that the WS2 monolayer can be a possible optical material for optoelectronic applications, and it can also be a replacement of MoS2 -based future electronics and optoelectronics.

Selection of a stable reference gene for relative copy number profiling of porcine chromosomal genes using SYBR green qPCR.

Reference gene with stable copy number is essential for normalization in qPCR based copy number assay. Present study aims to identify a suitable reference gene in pigs for qPCR based relative copy number profiling of chromosomal genes. A total of 30 crossbred pigs of both sexes were cyto-screened and gDNA was extracted from the pigs having numerically normal karyotypes. The copy number stability was studied for 7 genes (FSHB, IL4, IGF1R, TCF24, BRMS1L, ARMC1 and SRSF4) selected on the basis of the chromosomal location, reports of single copy and lack of involvement in structural chromosomal abnormalities. The copy number was estimated from Ct values in 3 technical replicates using 6 animals from either sex for each gene. The stability was evaluated from the variations in Ct values using different (Delta Ct, geNorm, BestKeeper and normFinder) algorithms. While the moderate variation was observed among relative copy number stabilities among the genes, comprehensive ranking revealed the most stable gene for normalization (IGF1R > FSHB > TCF24 > IL4 > ARMC1> SRSF4 > BRMS1L) across the samples. The selected reference gene was validated using DNA of cyto-screened pigs to find out ratio of X and Y chromosome fragments using qPCR based copy number analysis.

Genetic polymorphism of microsatellite loci in MHC class II exon 2 gene and its association with endoparasitic infestation, predominantly Haemonchus contortus in Salem black goat.

MHC gene is highly polymorphic and plays central molecule in immune system in recognition of pathogens and parasites. The present study examined the variability of MHC class II DRB exon 2 gene using microsatellite analysis, and its association with Haemonchus contortus infestation in Salem Black goat population. Animals were naturally exposed to mixed infestation of endoparasites, predominantly Haemonchus contortus. Pooled fecal coproculture and larval identification showed predominant presence of haemonchus (L3) larva. Fecal egg count (FEC) and packed cell volume (PCV) were used as indicator traits. All the three studied loci, OarCP73, DYA, and ODRB1.2, were polymorphic having three, four, and four alleles and four, eight, and nine genotypes, respectively. The loci showed low to moderate values of polymorphic information content. The mean fecal egg count estimates were 477.12 ± 34.14 eggs per gram of feces and the mean PCV values were within the normal range; however, they showed negative correlation with FEC values. All the three microsatellite loci and the effect of genotypes on indicator traits were found to be statistically significant (p ≤ 0.05). The present study will be helpful in selection and breeding of goats for Haemonchosis resistance.

WS2 Nanorod as a Remarkable Acetone Sensor for Monitoring Work/Public Places.

Here, we report the synthesis of the WS2 nanorods (NRs) using an eco-friendly and facile hydrothermal method for an acetone-sensing application. This study explores the acetone gas-sensing characteristics of the WS2 nanorod sensor for 5, 10, and 15 ppm concentrations at 25 °C, 50 °C, 75 °C, and 100 °C. The WS2 nanorod sensor shows the highest sensitivity of 94.5% at 100 °C for the 15 ppm acetone concentration. The WS2 nanorod sensor also reveals the outstanding selectivity of acetone compared to other gases, such as ammonia, ethanol, acetaldehyde, methanol, and xylene at 100 °C with a 15 ppm concentration. The estimated selectivity coefficient indicates that the selectivity of the WS2 nanorod acetone sensor is 7.1, 4.5, 3.7, 2.9, and 2.0 times higher than xylene, acetaldehyde, ammonia, methanol, and ethanol, respectively. In addition, the WS2 nanorod sensor also divulges remarkable stability of 98.5% during the 20 days of study. Therefore, it is concluded that the WS2 nanorod can be an excellent nanomaterial for developing acetone sensors for monitoring work/public places.