Identification of the high-yield monacolin K strain from Monascus spp. and its submerged fermentation using different medicinal plants.

BACKGROUND: Medical plants confer various benefits to human health and their bioconversion through microbial fermentation can increase efficacy, reduce toxicity, conserve resources and produce new chemical components. In this study, the cholesterol-lowering monacolin K genes and content produced by Monascus species were identified. The high-yield monacolin K strain further fermented with various medicinal plants. The antioxidant and anti-inflammatory activities, red pigment and monacolin K content, total phenolic content, and metabolites in the fermented products were analyzed. RESULTS: Monacolin K was detected in Monascus pilosus (BCRC 38072), and Monascus ruber (BCRC 31533, 31523, 31534, 31535, and 33323). It responded to the highly homologous mokA and mokE genes encoding polyketide synthase and dehydrogenase. The high-yield monacolin K strain, M. ruber BCRC 31535, was used for fermentation with various medicinal plants. A positive relationship between the antioxidant capacity and total phenol content of the fermented products was observed after 60 days of fermentation, and both declined after 120 days of fermentation. By contrast, red pigment and monacolin K accumulated over time during fermentation, and the highest monacolin K content was observed in the fermentation of Glycyrrhiza uralensis, as confirmed by RT-qPCR. Moreover, Monascus-fermented medicinal plants including Paeonia lactiflora, Alpinia oxyphylla, G. uralensis, and rice were not cytotoxic. Only the product of Monascus-fermented G. uralensis significantly exhibited the anti-inflammatory capacity in a dose-dependent manner in lipopolysaccharide-induced Raw264.7 cells. The metabolites of G. uralensis with and without fermentation (60 days) were compared by LC/MS. 2,3-Dihydroxybenzoic acid, 3,4-dihydroxyphenylglycol, and 3-amino-4-hydroxybenzoate were considered to enhance the antioxidant and anti-inflammatory ability. CONCLUSIONS: Given that highly homologous monacolin K and citrinin genes can be observed in Monascus spp., monacolin K produced by Monascus species without citrinin genes can be detected through the complementary methods of PCR and HPLC. In addition, the optimal fermentation time was important to the acquisition of antioxidants, red pigment and monacolin K. These bioactive substances were significantly affected by medicinal plants over fermentation time. Consequently, Monascus-fermented G. uralensis had a broad spectrum of biological activities.

Green conversion of 5-hydroxymethylfurfural to furan-2,5-dicarboxylic acid by heterogeneous expression of 5-hydroxymethylfurfural oxidase in Pseudomonas putida S12.

Transforming petrochemical processes into bioprocesses has become an important goal of sustainable development. The chemical synthesis of 2,5-furandicarboxylic acid (FDCA) from 5-hydroxymethylfurfural (HMF) is expensive and environmentally unfavourable. The study aims to investigate a whole-cell biocatalyst for efficient biotransformation of HMF to FDCA. For the first time, a genetically engineered Pseudomonas putida S12 strain expressing 5-hydroxymethylfurfural oxidase (HMFO) was developed for the biocatalytic conversion of HMF to FDCA. This whole-cell biocatalyst produced 35.7 mM FDCA from 50 mM HMF in 24 h without notable inhibition. However, when the initial HMF concentration was elevated to 100 mM, remarkable inhibition on FDCA production was observed, resulting in a reduction of FDCA yield to 42%. We solve this substrate inhibition difficulty by increasing the inoculum density. Subsequently, we used a fed-batch strategy by maintaining low HMF concentration in the culture to maximize the final FDCA titre. Using this approach, 545 mM of FDCA was accumulatively produced after 72 hs, which is the highest production rate per unit mass of cells to the best of our knowledge.

Production of optically pure L(+)-lactic acid from waste plywood chips using an isolated thermotolerant Enterococcus faecalis SI at a pilot scale.

Utilization of renewable and low-cost lignocellulosic wastes has received major focus in industrial lactic acid production. The use of high solid loadings in biomass pretreatment potentially offers advantages over low solid loadings including higher lactic acid concentration with decreased production and capital costs. In this study, an isolated Enterococcus faecalis SI with optimal temperature 42 °C was used to produce optically pure L-lactic acid (> 99%) from enzyme-saccharified hydrolysates of acid-impregnated steam explosion (AISE)-treated plywood chips. The L-lactic acid production increased by 10% at 5 L scale compared to the similar fermentation scheme reported by Wee et al. The fermentation with a high solid loading of 20% and 35% (w/v) AISE-pretreated plywood chips had been successfully scaled up to process development unit scale (100 L) and pilot scale (9 m3), respectively. This is the first report of pilot-scale lignocellulosic lactic acid fermentation by E. faecalis with high lactic acid titer (nearly 92 g L-1) and yield (0.97 kg kg-1). Therefore, large-scale L-lactic acid production by E. faecalis SI shows the potential application for industries.

Production of optically pure L-lactic acid from lignocellulosic hydrolysate by using a newly isolated and D-lactate dehydrogenase gene-deficient Lactobacillus paracasei strain.

The use of lignocellulosic feedstock for lactic acid production with a difficulty is that the release of inhibitory compounds during the pretreatment process which inhibit the growth of microorganism. Thus we report a novel lactic acid bacterium, Lactobacillus paracasei 7 BL, that has a high tolerance to inhibitors and produced optically pure l-lactic acid after the interruption of ldhD gene. The strain 7 BL fermented glucose efficiently and showed high titer of l-lactic acid (215 g/l) by fed-batch strategy. In addition, 99 g/l of l-lactic acid with high yield (0.96 g/g) and productivity (2.25-3.23 g/l/h) was obtained by using non-detoxified wood hydrolysate. Rice straw hydrolysate without detoxification was also tested and yielded a productivity rate as high as 5.27 g/l/h. Therefore, L. paracasei 7 BL represents a potential method of l-lactic acid production from lignocellulosic biomass and has attractive application for industries.

Stable integration and expression of heterologous genes in several lactobacilli using an integration vector constructed from the integrase and attP sequences of phage ΦAT3 isolated from Lactobacillus casei ATCC 393.

An integration vector capable of stably integrating and maintaining in the chromosomes of several lactobacilli over hundreds of generations has been constructed. The major integration machinery used is based on the ΦAT3 integrase (int) and attP sequences determined previously. A novel core sequence located at the 3' end of the tRNA(leu) gene is identified in Lactobacillus fermentum ATCC 14931 as the integration target by the integration vector though most of such sequences found in other lactobacilli are similar to that determined previously. Due to the lack of an appropriate attB site in Lactococcus lactis MG1363, the integration vector is found to be unable to integrate into the chromosome of the strain. However, such integration can be successfully restored by cotransforming the integration vector with a replicative one harboring both attB and erythromycin resistance sequences into the strain. Furthermore, the integration vector constructed carries a promoter region of placT from the chromosome of Lactobacillus rhamnosus TCELL-1 which is used to express green fluorescence and luminance protein genes in the lactobacilli studied.

Characterization of putative class II bacteriocins identified from a non-bacteriocin-producing strain Lactobacillus casei ATCC 334.

Several putative class II bacteriocin-like genes were identified in Lactobacillus casei ATCC 334, all of which might encode peptides with a double-glycine leader. Six peptides encoded by these genes were heterologously expressed in Escherichia coli and then partially purified in order to test their bacteriocin activity. The results revealed that the mature LSEI_2163 peptide was a class IId bacteriocin that exhibited antimicrobial activity against some lactobacilli and several Listeria species. Similarly, mature LSEI_2386 was a putative pheromone peptide that also had significant bacteriocin activity against several Listeria species. The activities of both peptides tolerated 121°C for 30 min but not treatment with proteinase K or trypsin. The two Cys residues located at positions 4 and 24 in the mature LSEI_2163 peptide were shown by mass spectrometry to form a disulfide bridge, which was required for optimal antibacterial activity. However, replacement of one or both Cys with Ser would cause significant reduction of the antibacterial activity, the reduction being greater when only one of the Cys residues (C4S) was replaced than when both (C4S/C24S) were replaced.

Formation of an inverted repeat junction in the transposition of insertion sequence ISLC3 isolated from Lactobacillus casei.

An insertion sequence, ISLC3, of 1351 bp has been isolated from Lactobacillus casei. Formation of IS circles containing a 3 bp spacer (complete junction) or deletion of 25 bp at the left inverted repeat (IRL) between the abutted IS ends of the ISLC3 junction region (deleted junction) was also discovered in the lactobacilli and Escherichia coli system studied. We found that the promoter formed by the complete junction P(jun) was more active than that formed by the 25 bp deleted junction P(djun) or the indigenous promoter P(IRL). The corresponding transcription start sites for both promoter P(jun) and P(IRL) as well as P(djun) were subsequently determined using a primer extension assay. The activity of transposase OrfAB of ISLC3 was also assayed using an in vitro system. It was found that this transposase preferred to cleave a single DNA strand at the IRR over the IRL end in the transposition process, suggesting that attack of one end by the other was oriented from IRR to IRL.