Silicon-organic hybrid (SOH) Mach-Zehnder modulators for 100 GBd PAM4 signaling with sub-1†dB phase-shifter loss.

We report on compact and efficient silicon-organic hybrid (SOH) Mach-Zehnder modulators (MZM) with low phase-shifter insertion loss of 0.7 dB. The 280 µm-long phase shifters feature a π-voltage-length product of 0.41 Vmm and a loss-efficiency product as small as aUπL = 1.0 VdB. The device performance is demonstrated in a data transmission experiment, where we generate on-off-keying (OOK) and four-level pulse-amplitude modulation (PAM4) signals at symbol rates of 100 GBd, resulting in line rates of up to 200 Gbit/s. Bit error ratios are below the threshold for hard-decision forward error correction (HD-FEC) with 7% coding overhead, leading to net data rates of 187 Gbit/s. This is the highest PAM4 data rate ever achieved for a sub-1 mm silicon photonic MZM.

Verified equivalent-circuit model for slot-waveguide modulators.

We formulate and experimentally validate an equivalent-circuit model based on distributed elements to describe the electric and electro-optic (EO) properties of travelling-wave silicon-organic hybrid (SOH) slot-waveguide modulators. The model allows to reliably predict the small-signal EO frequency response of the modulators exploiting purely electrical measurements of the frequency-dependent RF transmission characteristics. We experimentally verify the validity of our model, and we formulate design guidelines for an optimum trade-off between optical loss due to free-carrier absorption (FCA), electro-optic bandwidth, and π-voltage of SOH slot-waveguide modulators.

Hybrid multi-chip assembly of optical communication engines by in situ 3D nano-lithography.

Three-dimensional (3D) nano-printing of freeform optical waveguides, also referred to as photonic wire bonding, allows for efficient coupling between photonic chips and can greatly simplify optical system assembly. As a key advantage, the shape and the trajectory of photonic wire bonds can be adapted to the mode-field profiles and the positions of the chips, thereby offering an attractive alternative to conventional optical assembly techniques that rely on technically complex and costly high-precision alignment. However, while the fundamental advantages of the photonic wire bonding concept have been shown in proof-of-concept experiments, it has so far been unclear whether the technique can also be leveraged for practically relevant use cases with stringent reproducibility and reliability requirements. In this paper, we demonstrate optical communication engines that rely on photonic wire bonding for connecting arrays of silicon photonic modulators to InP lasers and single-mode fibres. In a first experiment, we show an eight-channel transmitter offering an aggregate line rate of 448 Gbit/s by low-complexity intensity modulation. A second experiment is dedicated to a four-channel coherent transmitter, operating at a net data rate of 732.7 Gbit/s - a record for coherent silicon photonic transmitters with co-packaged lasers. Using dedicated test chips, we further demonstrate automated mass production of photonic wire bonds with insertion losses of (0.7 ± 0.15) dB, and we show their resilience in environmental-stability tests and at high optical power. These results might form the basis for simplified assembly of advanced photonic multi-chip systems that combine the distinct advantages of different integration platforms.

Photonic-integrated circuits with non-planar topologies realized by 3D-printed waveguide overpasses.

Complex photonic-integrated circuits (PIC) may have strongly non-planar topologies that require waveguide crossings (WGX) when realized in single-layer integration platforms. The number of WGX increases rapidly with the complexity of the circuit, in particular when it comes to highly interconnected optical switch topologies. Here, we present a concept for WGX-free PIC that relies on 3D-printed freeform waveguide overpasses (WOP). We experimentally demonstrate the viability of our approach using the example of a 4 × 4 switch-and-select (SAS) circuit realized on the silicon photonic platform. We further present a comprehensive graph-theoretical analysis of different n × n SAS circuit topologies. We find that for increasing port counts n of the SAS circuit, the number of WGX increases with n4, whereas the number of WOP increases only in proportion to n2.

Demonstration of long-term thermally stable silicon-organic hybrid modulators at 85 °C.

We report on the first demonstration of long-term thermally stable silicon-organic hybrid (SOH) modulators in accordance with Telcordia standards for high-temperature storage. The devices rely on an organic electro-optic sidechain polymer with a high glass transition temperature of 172 °C. In our high-temperature storage experiments at 85 °C, we find that the electro-optic activity converges to a constant long-term stable level after an initial decay. If we consider a burn-in time of 300 h, the π-voltage of the modulators increases on average by less than 15% if we store the devices for an additional 2400 h. The performance of the devices is demonstrated by generating high-quality 40 Gbit/s OOK signals both after the burn-in period and after extended high-temperature storage.

Silicon-Organic Hybrid (SOH) Mach-Zehnder Modulators for 100 Gbit/s on-off Keying.

Electro-optic modulators for high-speed on-off keying (OOK) are key components of short- and medium-reach interconnects in data-center networks. Small footprint, cost-efficient large-scale production, small drive voltages and ultra-low power consumption are of paramount importance for such devices. Here we demonstrate that the concept of silicon-organic hybrid (SOH) integration perfectly meets these challenges. The approach combines the unique processing advantages of large-scale silicon photonics with unrivalled electro-optic (EO) coefficients obtained by molecular engineering of organic materials. Our proof-of-concept experiments demonstrate generation and transmission of OOK signals at line rates of up to 100 Gbit/s using a 1.1 mm-long SOH Mach-Zehnder modulator (MZM) featuring a π-voltage of only 0.9 V. The experiment represents the first demonstration of 100 Gbit/s OOK on the silicon photonic platform, featuring the lowest drive voltage and energy consumption ever demonstrated for a semiconductor-based device at this data rate. We support our results by a theoretical analysis showing that the nonlinear transfer characteristic of the MZM can help to overcome bandwidth limitations of the modulator and the electric driver circuitry. We expect that high-speed, power-efficient SOH modulators may have transformative impact on short-reach networks, enabling compact transceivers with unprecedented efficiency, thus building the base of future interfaces with Tbit/s data rates.

Electrically packaged silicon-organic hybrid (SOH) I/Q-modulator for 64 GBd operation.

Silicon-organic hybrid (SOH) electro-optic (EO) modulators combine small footprint with low operating voltage and hence low power dissipation, thus lending themselves to on-chip integration of large-scale device arrays. Here we demonstrate an electrical packaging concept that enables high-density radio-frequency (RF) interfaces between on-chip SOH devices and external circuits. The concept combines high-resolution Al2O3 printed-circuit boards with technically simple metal wire bonds and is amenable to packaging of device arrays with small on-chip bond pad pitches. In a set of experiments, we characterize the performance of the underlying RF building blocks and we demonstrate the viability of the overall concept by generation of high-speed optical communication signals. Achieving line rates (symbols rates) of 128 Gbit/s (64 GBd) using quadrature-phase-shift-keying (QPSK) modulation and of 160 Gbit/s (40 GBd) using 16-state quadrature-amplitude-modulation (16QAM), we believe that our demonstration represents an important step in bringing SOH modulators from proof-of-concept experiments to deployment in commercial environments.

Silicon-organic hybrid (SOH) modulators for intensity-modulation / direct-detection links with line rates of up to 120 Gbit/s.

High-speed interconnects in data-center and campus-area networks crucially rely on efficient and technically simple transmission techniques that use intensity modulation and direct detection (IM/DD) to bridge distances of up to a few kilometers. This requires electro-optic modulators that combine low operation voltages with large modulation bandwidth and that can be operated at high symbol rates using integrated drive circuits. Here we explore the potential of silicon-organic hybrid (SOH) Mach-Zehnder modulators (MZM) for generating high-speed IM/DD signals at line rates of up to 120 Gbit/s. Using a SiGe BiCMOS signal-conditioning chip, we demonstrate that intensity-modulated duobinary (IDB) signaling allows to efficiently use the electrical bandwidth, thereby enabling line rates of up to 100 Gbit/s at bit error ratios (BER) of 8.5 × 10-5. This is the highest data rate achieved so far using a silicon-based MZM in combination with a dedicated signal-conditioning integrated circuit (IC). We further show four-level pulse-amplitude modulation (PAM4) at lines rates of up to 120 Gbit/s (BER = 3.2 × 10-3) using a high-speed arbitrary-waveform generator and a 0.5 mm long MZM. This is the highest data rate hitherto achieved with a sub-millimeter MZM on the silicon photonic platform.