ABSTRACT
Acute and chronic bone infections, especially those caused by methicillin-resistant Staphylococcus aureus (MRSA), remains a major complication and therapeutic challenge. It is documented that local administration of vancomycin offers better results than the usual routes of administration (e.g., intravenous) when ischemic areas are present. In this work, we evaluate the antimicrobial efficacy against S. aureus and S. epidermidis of a novel hybrid 3D-printed scaffold based on polycaprolactone (PCL) and a chitosan (CS) hydrogel loaded with different vancomycin (Van) concentrations (1, 5, 10, 20%). Two cold plasma treatments were used to improve the adhesion of CS hydrogels to the PCL scaffolds by decreasing PCL hydrophobicity. Vancomycin release was measured by means of HPLC, and the biological response of ah-BM-MSCs growing in the presence of the scaffolds was evaluated in terms of cytotoxicity, proliferation, and osteogenic differentiation. The PCL/CS/Van scaffolds tested were found to be biocompatible, bioactive, and bactericide, as demonstrated by no cytotoxicity (LDH activity) or functional alteration (ALP activity, alizarin red staining) of the cultured cells and by bacterial inhibition. Our results suggest that the scaffolds developed would be excellent candidates for use in a wide range of biomedical fields such as drug delivery systems or tissue engineering applications.
ABSTRACT
Nowadays, there exists a huge interest in producing innovative, high-performance, biofunctional, and cost-efficient electrospun biomaterials based on the association of biocompatible polymers with bioactive molecules. Such materials are well-known to be promising candidates for three-dimensional biomimetic systems for wound healing applications because they can mimic the native skin microenvironment; however, many open questions such as the interaction mechanism between the skin and the wound dressing material remain unclear. Recently, several biomolecules were intended for use in combination with poly(vinyl alcohol) (PVA) fiber mats to improve their biological response; nevertheless, retinol, an important biomolecule, has not been combined yet with PVA to produce tailored and biofunctional fiber mats. Based on the abovementioned concept, the present work reported the fabrication of retinol-loaded PVA electrospun fiber mats (RPFM) with a variable content of retinol (0 ≤ Ret ≤ 25 wt.%), and their physical-chemical and biological characterization. SEM results showed that fiber mats exhibited diameters distribution ranging from 150 to 225 nm and their mechanical properties were affected with the increasing of retinol concentrations. In addition, fiber mats were able to release up to 87% of the retinol depending on both the time and the initial content of retinol. The cell culture results using primary mesenchymal stem cell cultures proved the biocompatibility of RPFM as confirmed by their effects on cytotoxicity (low level) and proliferation (high rate) in a dose-dependent manner. Moreover, the wound healing assay suggested that the optimal RPFM with retinol content of 6.25 wt.% (RPFM-1) enhanced the cell migratory activity without altering its morphology. Accordingly, it is demonstrated that the fabricated RPFM with retinol content below the threshold 0 ≤ Ret ≤ 6.25 wt.% would be an appropriate system for skin regenerative application.
ABSTRACT
Polyvinyl alcohol (PVA) hydrogels are well-known biomimetic 3D systems for mammalian cell cultures to mimic native tissues. Recently, several biomolecules were intended for use in PVA hydrogels to improve their biological properties. However, retinol, an important biomolecule, has not been combined with a PVA hydrogel for culturing bone marrow mesenchymal stem (BMMS) cells. Thus, for the first time, the effect of retinol on the physicochemical, antimicrobial, and cell proliferative properties of a PVA hydrogel was investigated. The ability of protein (3.15 nm) and mineral adsorption (4.8 mg/mL) of a PVA hydrogel was improved by 0.5 wt.% retinol. The antimicrobial effect of hydrogel was more significant in S. aureus (39.3 mm) than in E. coli (14.6 mm), and the effect was improved by increasing the retinol concentration. The BMMS cell proliferation was more upregulated in retinol-loaded PVA hydrogel than in the control at 7 days. We demonstrate that the respective in vitro degradation rate of retinol-loaded PVA hydrogels (RPH) (75-78% degradation) may promote both antibacterial and cellular proliferation. Interestingly, the incorporation of retinol did not affect the cell-loading capacity of PVA hydrogel. Accordingly, the fabricated PVA retinol hydrogel proved its compatibility in a stem cell culture and could be a potential biomaterial for tissue regeneration.
Subject(s)
Biocompatible Materials , Mesenchymal Stem Cells , Animals , Biocompatible Materials/pharmacology , Polyvinyl Alcohol/pharmacology , Polyvinyl Alcohol/chemistry , Vitamin A/pharmacology , Staphylococcus aureus , Escherichia coli , Anti-Bacterial Agents/pharmacology , Cell Proliferation , Hydrogels/pharmacology , Hydrogels/chemistry , MammalsABSTRACT
In this work, we evaluated the influence of a novel hybrid 3D-printed porous composite scaffold based on poly(ε-caprolactone) (PCL) and ß-tricalcium phosphate (ß-TCP) microparticles in the process of adhesion, proliferation, and osteoblastic differentiation of multipotent adult human bone marrow mesenchymal stem cells (ah-BM-MSCs) cultured under basal and osteogenic conditions. The in vitro biological response of ah-BM-MSCs seeded on the scaffolds was evaluated in terms of cytotoxicity, adhesion, and proliferation (AlamarBlue Assay®) after 1, 3, 7, and 14 days of culture. The osteogenic differentiation was assessed by alkaline phosphatase (ALP) activity, mineralization (Alizarin Red Solution, ARS), expression of surface markers (CD73, CD90, and CD105), and reverse transcription-quantitative polymerase chain reaction (qRT-PCR) after 7 and 14 days of culture. The scaffolds tested were found to be bioactive and biocompatible, as demonstrated by their effects on cytotoxicity (viability) and extracellular matrix production. The mineralization and ALP assays revealed that osteogenic differentiation increased in the presence of PCL/ß-TCP scaffolds. The latter was also confirmed by the gene expression levels of the proteins involved in the ossification process. Our results suggest that similar bio-inspired hybrid composite materials would be excellent candidates for osteoinductive and osteogenic medical-grade scaffolds to support cell proliferation and differentiation for tissue engineering, which warrants future in vivo research.
Subject(s)
Calcium Phosphates/chemistry , Cell Differentiation/genetics , Mesenchymal Stem Cells/cytology , Osteoblasts/cytology , Polyesters/chemistry , Alkaline Phosphatase/metabolism , Cell Adhesion , Cell Proliferation , Cells, Cultured , Gene Expression Regulation , Humans , Osteogenesis/genetics , Osteogenesis/physiology , Porosity , Printing, Three-Dimensional , Tissue Scaffolds , X-Ray MicrotomographyABSTRACT
Using cyclodextrins (CDs) in packaging technologies helps volatile or bioactive molecules improve their solubility, to guarantee the homogeneous distribution of the complexed molecules, protecting them from volatilization, oxidation, and temperature fluctuations when they are associated with polymeric matrices. This technology is also suitable for the controlled release of active substances and allows the exploration of their association with biodegradable polymer targeting to reduce the negative environmental impacts of food packaging. Here, we present a fresh look at the current status of and future prospects regarding the different strategies used to associate cyclodextrins and their derivatives with polymeric matrices to fabricate sustainable and biodegradable active food packaging (AFP). Particular attention is paid to the materials and the fabrication technologies available to date. In addition, the use of cutting-edge strategies, including the trend of nanotechnologies in active food packaging, is emphasized. Furthermore, a critical view on the risks to human health and the associated updated legislation is provided. Some of the more representative patents and commercial products that currently use AFP are also listed. Finally, the current and future research challenges which must be addressed are discussed.
ABSTRACT
PURPOSE: Several studies have demonstrated the properties of hydroxytyrosol, a phenolic compound present in olive oils and olives with a well-characterized impact on human health. Nevertheless, some knowledge gaps remain on its bioavailability and metabolism; overall concerning to the real rate per cent of absorption and biovailability of dietary hydroxytyrosol and the influence of the dietary food-containing hydroxytyrosol on it. METHODS: A double-blind study was performed including 20 volunteers who ingested 5 mg of hydroxytyrosol through diverse food matrices, to discover the influence on pharmacokinetics and bioavailability of HT metabolites (hydroxytyrosol acetate, 3,4-dihydroxyphenylacetic acid (DOPAC), tyrosol, and homovanillic alcohol) of the distinct matrices by UHPLC-ESI-QqQ-MS/MS. RESULTS: The HT pharmacokinetics after consumption of different food matrices was strongly dependent on the food matrix. In this aspect, the intake of extra virgin olive exhibited significantly higher plasma concentrations after 30 min of oral intake (3.79 ng/mL) relative to the control. Regarding the hydroxytyrosol bioavailability, the intake of extra virgin olive oil, as well as fortified refined olive, flax, and grapeseed oils provided significantly higher urinary contents (0.86, 0.63, 0.55, and 0.33 µg/mg creatinine, respectively) compared with basal urine, whereas hydroxytyrosol metabolites showed no significant changes. No differences were found between men and women. CONCLUSIONS: The metabolic profile of hydroxytyrosol is influenced by the food matrix in which is incorporated, with the oily nature for the final bioavailability being relevant. Extra virgin olive oil was identified as the best matrix for this compound. The results described contribute to the understanding of the relevance of the food matrices for the final absorption of hydroxytyrosol and hence, the achievement of the highest health protection potential.
Subject(s)
Olea , Phenylethyl Alcohol , Biological Availability , Female , Humans , Male , Olive Oil , Phenylethyl Alcohol/analogs & derivatives , Plant Oils , Tandem Mass SpectrometryABSTRACT
This work aims to provide an effective and novel dual tool for the biodistribution studies of biopolimeric nanoparticles by using modified silk fibroin nanoparticles as a model. This is an indispensable step in the evaluation of the applicability of biopolymeric nanoparticles as drug delivery systems. In this work, we report a new facile method for radiolabeling silk fibroin nanoparticles conjugated to the chelating agent diethylenetriamine pentaacetic acid and tagged with fluorescein isothiocyanate. Nanoparticles were characterized by means of dynamic light scattering, scanning electron microscopy, and infrared and fluorescence spectroscopy. The in vitro studies included stability in biological media and evaluation of the cytotoxicity of the nanoparticles in a cell culture. The in vivo study was focused on a scintigraphic study over 24 h conducted on New Zealand rabbits, after intra-articular injection of [111In]In-nanoparticles containing 8.03 ± 0.42 MBq. Biodistribution of the nanoparticles was also assessed ex vivo by fluorescence microscopy of post mortem biopsied organs. This radiolabeling method was reproducible and robust with high radiolabeling efficiency (â¼80%) and high specific activity suitable for in vivo studies. Radiolabeled nanoparticles, having a hydrodynamic radius of 113.2 ± 2.3 nm, a polydispersity index of 0.101 ± 0.015, and a Z-potential of -30.1 ± 2.0 mV, showed an optimum retention in the articular space, without activity clearance up to 24 h post injection. Thus, an easy and robust radiolabeling method has been developed, and its applicability is demonstrated in vitro and in vivo studies, showing its value for future investigation of silk fibroin nanoparticles as versatile and stable (steady) local drug delivery systems for consideration as a therapeutic option, particularly in the treatment of joint disorders.
Subject(s)
Fibroins , Nanoparticles , Animals , Drug Delivery Systems , Pentetic Acid , Rabbits , Tissue DistributionABSTRACT
Calcium phosphate materials are widely used as bone substitutes due to their bioactive and biodegradable properties. Also, the presence of silicon in their composition seems to improve the bioactivity of the implant and promote bone tissue repair. The aim of this study was to develop a novel ceramic scaffold by partial solid-state sintering method with a composition lying in the field of the Nurse's A-phase-silicocarnotite, in the tricalcium phosphate-dicalcium silicate (TCP-C2S) binary system. Also, we evaluated its osteogenic and osteoconductive properties after being implanted into tibia defects in New Zealand rabbits. X-ray, microcomputer tomography, and histomorphometry studies demonstrated that this porous ceramic is highly biocompatible and it has excellent osteointegration. The material was being progressively reabsorbed throughout the study and there was no unspecified local or systemic inflammatory response observed. These results suggest that ceramic imitates the physicochemical characteristics of bone substitutes used in bone reconstruction.