Fabrication of Rhenium Disulfide/Mesoporous Silica Core-Shell Nanoparticles for a pH-Responsive Drug Release and Combined Chemo-Photothermal Therapy.

A stimuli-responsive drug delivery nanocarrier with a core-shell structure combining photothermal therapy and chemotherapy for killing cancer cells was constructed in this study. The multifunctional nanocarrier ReS2@mSiO2-RhB entails an ReS2 hierarchical nanosphere coated with a fluorescent mesoporous silica shell. The three-dimensional hierarchical ReS2 nanostructure is capable of effectively absorbing near-infrared (NIR) light and converting it into heat. These ReS2 nanospheres were generated by a hydrothermal synthesis process leading to the self-assembly of few-layered ReS2 nanosheets. The mesoporous silica shell was further coated on the surface of the ReS2 nanospheres through a surfactant-templating sol-gel approach to provide accessible mesopores for drug uploading. A fluorescent dye (Rhodamine B) was covalently attached to silica precursors and incorporated during synthesis in the mesoporous silica walls toward conferring imaging capability to the nanocarrier. Doxorubicin (DOX), a known cancer drug, was used in a proof-of-concept study to assess the material's ability to function as a drug delivery carrier. While the silica pores are not capped, the drug molecule loading and release take advantage of the pH-governed electrostatic interactions between the drug and silica wall. The ReS2@mSiO2-RhB enabled a drug loading content as high as 19.83 mg/g doxorubicin. The ReS2@mSiO2-RhB-DOX nanocarrier's cumulative drug release rate at pH values that simulate physiological conditions showed significant pH responsiveness, reaching 59.8% at pH 6.8 and 98.5% and pH 5.5. The in vitro testing using HeLa cervical cancer cells proved that ReS2@mSiO2-RhB-DOX has a strong cancer eradication ability upon irradiation with an NIR laser owing to the combined drug delivery and photothermal effect. The results highlight the potential of ReS2@mSiO2-RhB nanoparticles for combined cancer therapy in the future.

Lignin-Based Nanospheres as Environmental Remediation Platforms for Anionic Dye Contaminants.

Modern manufacturing of textiles, pharmaceuticals, food, cosmetics, plastics, paper, etc. involves the utilization of anionic and cationic dyes that lead to significant water contamination. Recent research has explored the use of nanomaterials toward developing nanoadsorbents for water decontamination caused by industrial pollution. Here, we report on a novel platform for anionic dye remediation, consisting of a polyethylenimine-functionalized lignin nanosphere (PEI-LNS). The designed nanomaterial shows significant ability to adsorb an anionic dye selected as a proof-of-concept-Sulforhodamine B, from aqueous solutions. The PEI lignin nanoadsorbents (PEI-LNS) showed a better ability to adsorb Sulforhodamine B sodium salt (SBSS) when compared to the raw lignin nanosphere adsorbent (LNS), especially in acidic conditions. The nanomaterial was characterized through transmission electron microscopy, scanning electron microscopy, Brunauer-Emmett-Teller surface area analysis, elemental analysis, zeta potential, thermogravimetric analysis, Fourier transform infrared spectroscopy, and nuclear magnetic resonance. The impacts of ionic strength, contact time, pH, and adsorbent concentration have been evaluated. The ability of PEI-LNS to adsorb SBSS was found to be consistent with Langmuir isotherms and pseudo-second-order kinetic models. The PEI-LNS could be recycled three times, reaching a good (85%) adsorbing capacity even in the third cycle. The study demonstrates that PEI-LNS has a strong affinity as a novel adsorbent for anionic dyes and could be employed in environmental cleanups pertaining to such contaminations.

Size-Controlled Cu3VSe4 Nanocrystals as Cathode Material in Platinum-Free Dye-Sensitized Solar Cells.

In this work, we report the first single-step, size-controlled synthesis of Cu3VSe4 cuboidal nanocrystals, with the longest dimension ranging from 9 to 36 nm, and their use in replacing the platinum counter electrode in dye-sensitized solar cells. Cu3VSe4, a ternary semiconductor from the class of sulvanites, is theoretically predicted to have good hole mobility, making it a promising candidate for charge transport in solar photovoltaic devices. The identity and crystalline purity of the Cu3VSe4 nanocrystals were validated by X-ray powder diffraction (XRD) and Raman spectroscopy. The particle size was determined from the XRD data using the Williamson-Hall equation and was found in agreement with the transmission electron microscopy imaging. Based on the electrochemical activity of the Cu3VSe4 nanocrystals, studied by cyclic voltammetry, the nanomaterials were further employed for fabricating counter electrodes (CEs) in Pt-free dye-sensitized solar cells. The counter electrodes were prepared from Cu3VSe4 nanocrystals as thin films, and the charge transfer kinetics were studied by electrochemical impedance spectroscopy. The work demonstrates that Cu3VSe4 counter electrodes successfully replace platinum in DSSCs. CEs fabricated with the Cu3VSe4 nanocrystals having an average particle size of 31.6 nm outperformed Pt, leading to DSSCs with the highest power conversion efficiency (5.93%) when compared with those fabricated with the Pt CE (5.85%).

Infrared-Activated Bactericide: Rhenium Disulfide (ReS2)-Functionalized Mesoporous Silica Nanoparticles.

An attractive strategy for treating bacterial infection is the combination of antibiotic chemotherapy with photothermal therapy (PTT), which could be implemented using multifunctional nanomaterials. In this work, the intrinsic photothermal efficiency of two-dimensional (2D) rhenium disulfide (ReS2) nanosheets is enhanced by their coating on mesoporous silica nanoparticles (MSNs) to realize a highly efficient light-responsive nanoparticle endowed with controlled-release drug delivery capability, denoted as MSN-ReS2. The MSN component of the hybrid nanoparticle features augmented pore size toward facilitating increased loading of antibacterial drugs. The ReS2 synthesis is conducted in the presence of MSNs through an in situ hydrothermal reaction and leads to a uniform surface coating of the nanosphere. The MSN-ReS2 bactericide testing showed more than 99% bacterial killing efficiency in both Gram-negative bacteria (Escherichia coli) and Gram-positive bacteria (Staphylococcus aureus) upon laser irradiation. A cooperative effect that led to a 100% bactericide effect on Gram-negative bacteria (E. coli) was observed when tetracycline hydrochloride was loaded in the carrier. The results show the potential of MSN-ReS2 to be used as a wound-healing therapeutic with a synergistic bactericide role.

Dietary supplementation of synbiotic Leuconostoc mesenteroide B4 and dextran improves immune regulation and disease resistance of Penaeus vannamei against Vibrio parahaemolyticus.

White shrimp (Penaeus vannamei) is an important culture species in Taiwan but often encounters disease infection by Vibrio parahaemolyticus that cause acute hepatopancreatic necrosis disease (AHPND). This study investigates the effects of dietary supplementation of Leuconostoc mesenteroide B4 and its fermentate (dextran) on the immune response, intestinal morphology, disease resistance, and immune-related gene expression in white shrimp. In comparison to the control group, the shrimp fed with a diet containing B4+dextran (107 CFU B4/g feed and 0.05% dextran) for 14, 28, 42 and 56 days had a significantly higher feed efficiency, weight gain and specific growth rate. A significantly higher villus height in the intestine and higher survival rate after challenging with V. parahaemolyticus was recorded for the B4+dextran group. Flow cytometry analysis demonstrated that the group that had ingested B4+dextran had a higher total hemocyte count and a higher proportion of semi-granulocytes, but a lower percentage of granulocytes compared to the control group. The shotgun metagenomic results in the midgut revealed that Leuco. mesenteroides was barely found in the midgut of the shrimp, suggesting that this microbe and its transient presence in the midgut is not the direct mechanism underlying the improved shrimp growth in the treated sample. Instead, dextran, a key ingredient in the B4 fermentate, on the dynamic of the microbial populations in shrimp, possibly promoting the diversity of gut microbes, especially the beneficial microbes, and thereby rendering protection against AHPND. In terms of comparing the gene expression between the control and synbiotic groups, pre- and post-bacterial challenge, a higher expression level of immune genes was mostly found in the B4+dextran group after challenging it with V. parahaemolyticus (group B4+dextran-VP) in the hepatopancreas and hemocyte. In contrast, the transcript level of immune-related genes was found to be higher in the B4+dextran group than other combinations in the midgut. Taken together, this study found that dietary addition of synbiotic Leuco. mesenteroides B4 and dextran can improve the growth performance, intestinal morphology and microbiome, regulation of immune genes and disease resistance against V. parahaemolyticus infection in white shrimp.

Colloidal Synthesis and Photocatalytic Properties of Cu3NbS4 and Cu3NbSe4 Sulvanite Nanocrystals.

Niobium sulvanites Cu3NbX4 (X = S, Se) have been theoretically predicted as promising candidates for solar photovoltaics and photocatalytic water splitting. This report outlines the first synthesis of Cu3NbS4 and Cu3NbSe4 in a nanocrystalline form. The crystal structures were investigated by X-ray diffraction, identity was confirmed by Raman spectroscopy, and the optoelectronic properties and morphology of Cu3NbS4 and Cu3NbSe4 nanocrystals were examined by UV-vis spectroscopy and transmission electron microscopy, respectively. To gain insight into the Cu3NbX4 formation, a mechanistic study was conducted for Cu3NbSe4 monitoring the nanoparticles' formation as a function of reaction time. Methylene blue photodegradation tests were conducted to evaluate the photoactivity of Cu3NbS4 and Cu3NbSe4. The degradation rates, 2.81 × 10-2 min-1 and 1.22 × 10-2 min-1 proved the photocatalysts' potential of nanoscale Cu3NbX4.

Photocatalytic Deposition of Nanostructured CsPbBr3 Perovskite Quantum Dot Films on Mesoporous TiO2 and Their Enhanced Visible-Light Photodegradation Properties.

Herein, we report the in situ photocatalytic deposition of cesium lead bromide (CsPbBr3) perovskite quantum dots on mesoporous TiO2-coated fluorine-doped tin oxide (FTO/TiO2) electrodes. The mesoporous TiO2 layer is used as a photocatalyst to promote the following: (1) the Pb deposition from a Pb2+ aqueous solution and (2) the in situ Pb conversion into CsPbBr3 perovskite in the presence of a CsBr methanolic solution without any organic capping agent. Both steps are carried out under ultraviolet light irradiation under ambient conditions without any post-treatment. The obtained FTO/TiO2/CsPbBr3 film was characterized by UV-vis diffuse reflectance spectroscopy, X-ray diffraction, photoluminescence spectroscopy, scanning electron microscopy, and transmission electron microscopy. The FTO/TiO2/CsPbBr3 heterojunction exhibited enhanced visible-light photodegradation activity demonstrated for the oxidation of curcumin organic dye as a model system. The novel and simple approach to fabricating a supported photocatalyst represents a scalable general method to use semiconductors as a platform to incorporate different perovskites, either all-inorganic or hybrid, for optoelectronic applications. The perovskite deposition method mediated by the UV light at room temperature could be further applied to flexible and wearable solar power electronics.

Stand-Alone CuFeSe2 (Eskebornite) Nanosheets for Photothermal Cancer Therapy.

Two-dimensional CuFeSe2 nanosheets have been successfully obtained via solution-phase synthesis using a sacrificial template method. The high purity was confirmed by X-ray diffraction and the two-dimensional morphology was validated by transmission electron microscopy. The intense absorption in the 400-1400 nm region has been the basis for the CuFeSe2 nanosheets' photothermal capabilities testing. The colloidal CuFeSe2 (CFS) nanosheets capped with S2- short ligands (CFS-S) exhibit excellent biocompatibility in cell culture studies and strong photothermal effects upon 808 nm laser irradiation. The nanosheets were further loaded with the cancer drug doxorubicin and exposed to laser irradiation, which accelerated the release of doxorubicin, achieving synergy in the therapeutic effect.

Sulvanites: The Promise at the Nanoscale.

The class of ternary copper chalcogenides Cu3MX4 (M = V, Nb, Ta; X = S, Se, Te), also known as the sulvanite family, has attracted attention in the past decade as featuring promising materials for optoelectronic devices, including solar photovoltaics. Experimental and theoretical studies of these semiconductors have provided much insight into their properties, both in bulk and at the nanoscale. The recent realization of sulvanites at the nanoscale opens new avenues for the compounds toward printable electronics. This review is aimed at the consideration of synthesis methods, relevant properties and the recent developments of the most important sulvanites.

Cascade synthesis and optoelectronic applications of intermediate bandgap Cu3VSe4 nanosheets.

Two-dimensional (2D) ternary materials recently generated interest in optoelectronics and energy-related applications, alongside their binary counterparts. To date, only a few naturally occurring layered 2D ternary materials have been explored. The plethora of benefits owed to reduced dimensionality prompted exploration of expanding non-layered ternary chalcogenides into the 2D realm. This work presents a templating method that uses 2D transition metal dichalcogenides as initiators to be converted into the corresponding ternary chalcogenide upon addition of copper, via a solution-phase synthesis, conducted in high boiling point solvents. The process starts with preparation of VSe2 nanosheets, which are next converted into Cu3VSe4 sulvanite nanosheets (NSs) which retain the 2D geometry while presenting an X-ray diffraction pattern identical with the one for the bulk Cu3VSe4. Both the scanning electron microscopy and transmission microscopy electron microscopy show the presence of quasi-2D morphology. Recent studies of the sulfur-containing sulvanite Cu3VS4 highlight the presence of an intermediate bandgap, associated with enhanced photovoltaic (PV) performance. The Cu3VSe4 nanosheets reported herein exhibit multiple UV-Vis absorption peaks, related to the intermediate bandgaps similar to Cu3VS4 and Cu3VSe4 nanocrystals. To test the potential of Cu3VSe4 NSs as an absorber for solar photovoltaic devices, Cu3VSe4 NSs thin-films deposited on FTO were subjected to photoelectrochemical testing, showing p-type behavior and stable photocurrents of up to ~ 0.036 mA/cm2. The photocurrent shows a ninefold increase in comparison to reported performance of Cu3VSe4 nanocrystals. This proves that quasi-2D sulvanite nanosheets are amenable to thin-film deposition and could show superior PV performance in comparison to nanocrystal thin-films. The obtained electrical impedance spectroscopy signal of the Cu3VSe4 NSs-FTO based electrochemical cell fits an equivalent circuit with the circuit elements of solution resistance (Rs), charge-transfer resistance (Rct), double-layer capacitance (Cdl), and Warburg impedance (W). The estimated charge transfer resistance value of 300 Ω cm2 obtained from the Nyquist plot provides an insight into the rate of charge transfer on the electrode/electrolyte interface.

Synthesis and optoelectronic properties of Cu3VSe4 nanocrystals.

The ternary chalcogenide Cu3VSe4 (CVSe) with sulvanite structure has been theoretically predicted to be a promising candidate for photovoltaic applications due to its suitable bandgap for solar absorption and the relatively earth-abundant elements in its composition. To realize the absorber layer via an inexpensive route, printed thin-films could be fabricated from dispersions of nano-sized Cu3VSe4 precursors. Herein, cubic Cu3VSe4 nanocrystals were successfully synthesized via a hot-injection method. Similar with reported Cu3VS4 nanocrystals, Cu3VSe4 nanocrystals with cubic structure exhibit three absorption bands in the UV-Visible range indicative of a potential intermediate bandgap existence. A thin film fabricated by depositing the nanoparticles Cu3VSe4 on FTO coated glass substrate, exhibited a p-type behavior and a photocurrent of ~ 4 µA/cm2 when measured in an electrochemical cell setting. This first demonstration of photocurrent exhibited by a CVSe nanocrystals thin film signifies a promising potential in photovoltaic applications.

Complete Genome Sequence of Lignin-Degrading Streptomyces sp. Strain S6, Isolated from an Oil Palm Plantation in Malaysia.

Streptomyces spp. are bacteria that are responsible for the degradation of aromatic compounds and produce secondary metabolites. Here, we present a complete genome sequence of Streptomyces sp. strain S6, which was isolated from an oil palm plantation, with a 7.8-Mbp liner chromosome, a GC content of 72%, and 4,266 coding sequences.

Functional characterization of two novel parvulins in Trypanosoma brucei.

Parvulins belong to a family of peptidyl-prolyl cis/trans isomerases (PPIases) that catalyze the cis/trans conformations of prolyl-peptidyl bonds. Herein, we characterized two novel parvulins, TbPIN1 and TbPAR42, in Trypanosoma brucei. TbPIN1, a 115 amino-acid protein, contains a single PPIase domain but lacks the N-terminal WW domain. Using NMR spectroscopy, TbPIN1 was found to exhibit PPIase activity toward a phosphorylated substrate. Overexpression of TbPIN1 can rescue the impaired temperature-sensitive phenotype in a mutant yeast strain. TbPAR42, containing 383 amino acids, comprises a novel FHA domain at its N terminus and a C-terminal PPIase domain but is a non-Pin1-type PPIase. Functionally, a knockdown of TbPAR42 in its procyclic form results in reduced proliferation rates suggesting an important role in cell growth.

Vault nanoparticles containing an adenovirus-derived membrane lytic protein facilitate toxin and gene transfer.

Nonviral methods of gene delivery possess several advantages over that of viral-based vectors, including having increased safety. However, the ability to achieve effective transport of therapeutic molecules across host cell membranes via nonviral methods remains a significant goal. Cell-derived nanoparticles known as vaults have been proposed as novel candidate transfer vehicles for various foreign molecules. Recombinant vault particles enter cells via macropinocytosis or phagocytosis but lack demonstrable membrane penetrating activity. To explore the feasibility of improving vault penetration into target cells, we incorporated the membrane lytic domain of adenovirus protein VI (pVI) into the interior of recombinant vault particles via fusion to the vault poly(ADP-ribose) polymerase (VPARP) interaction domain. The membrane lytic activity of the pVI domain was retained upon incorporation into vault particles. Moreover, internalization of vault-pVI complexes into murine macrophages promoted co-delivery of a soluble ribotoxin or a cDNA plasmid encoding GFP. These findings indicate that vault particles can be modified to enhance cell transfer of selected biomolecules.

Real-time imaging of tunable adenosine 5-triphosphate release from an MCM-41-type mesoporous silica nanosphere-based delivery system.

We studied a mesoporous silica nanosphere (MSN) material with tunable release capability for drug delivery applications. We employed luciferase chemiluminescence imaging to investigate the kinetics and mechanism of the adenosine 5-triphosphate (ATP) release with various disulfide-reducing agents as uncapping triggers. ATP molecules were encapsulated within the MSNs by immersing dry nanospheres in aqueous solutions of ATP followed by capping of the mesopores with chemically removable caps, such as cadmium sulfide (CdS) nanoparticles and poly(amido amine) dendrimers (PAMAM), via a disulfide linkage. By varying the chemical nature of the ''cap'' and ''trigger'' molecules in our MSN system, we discovered that the release profiles could indeed be regulated in a controllable fashion.

Fine-tuning the degree of organic functionalization of mesoporous silica nanosphere materials via an interfacially designed co-condensation method.

A synthetic method that can fine tune the amount of chemically accessible organic functional groups on the pore surface of MCM-41 type mesoporous silica nanosphere (MSN) materials has been developed by electrostatically matching various anionic organoalkoxysilanes with the cationic cetyltrimethylammonium bromide micelles in a base-catalyzed condensation reaction of tetraethoxysilane.

A polyamidoamine dendrimer-capped mesoporous silica nanosphere-based gene transfection reagent.

We synthesized a MCM-41-type mesoporous silica nanosphere (MSN)-based gene transfection system, where second generation (G2) polyamidoamines (PAMAMs) were covalently attached to the surface of MSN. The G2-PAMAM-capped MSN material (G2-MSN) was used to complex with a plasmid DNA (pEGFP-C1) that encodes for an enhanced green fluorescence protein. The gene transfection efficacy, uptake mechanism, and biocompatibility of the G2-MSN system with various cell types, such as neural glia (astrocytes), human cervical cancer (HeLa), and Chinese hamster ovarian (CHO) cells, were investigated. The mesoporous structure of the MSN material allows membrane-impermeable molecules, such as pharmaceutical drugs and fluorescent dyes, to be encapsulated inside the MSN channels. The system renders the possibility to serve as a universal transmembrane carrier for intracellular drug delivery and imaging applications.

Gatekeeping layer effect: a poly(lactic acid)-coated mesoporous silica nanosphere-based fluorescence probe for detection of amino-containing neurotransmitters.

We have synthesized a poly(lactic acid) coated MCM-41-type mesoporous silica nanosphere (PLA-MSN) material can serve as a fluorescence sensor system for detection of amino-containing neurotransmitters in neutral aqueous buffer. Utilizing the PLA layer as a gatekeeper, we investigated the molecular recognition events between several structurally simple neurotransmitters, i.e., dopamine, tyrosine, and glutamic acid and a pore surface-anchored o-phthalic hemithioacetal (OPTA) group, which functions as a fluorescence-sensing group that can react with the neurotransmitters with primary amine groups and form the corresponding fluorescent isoindole products. The poly(lactic acid) layer of the PLA-MSN sensor showed a unique "sieving" effect that regulates the rates of diffusion of the amino acid-based neurotransmitters into the sensor mesopores of the material.

A mesoporous silica nanosphere-based carrier system with chemically removable CdS nanoparticle caps for stimuli-responsive controlled release of neurotransmitters and drug molecules.

An MCM-41 type mesoporous silica nanosphere-based (MSN) controlled-release delivery system has been synthesized and characterized using surface-derivatized cadmium sulfide (CdS) nanocrystals as chemically removable caps to encapsulate several pharmaceutical drug molecules and neurotransmitters inside the organically functionalized MSN mesoporous framework. We studied the stimuli-responsive release profiles of vancomycin- and adenosine triphosphate (ATP)-loaded MSN delivery systems by using disulfide bond-reducing molecules, such as dithiothreitol (DTT) and mercaptoethanol (ME), as release triggers. The biocompatibility and delivery efficiency of the MSN system with neuroglial cells (astrocytes) in vitro were demonstrated. In contrast to many current delivery systems, the molecules of interest were encapsulated inside the porous framework of the MSN not by adsorption or sol-gel types of entrapment but by capping the openings of the mesoporous channels with size-defined CdS nanoparticles to physically block the drugs/neurotransmitters of certain sizes from leaching out. We envision that this new MSN system could play a significant role in developing new generations of site-selective, controlled-release delivery nanodevices.